Computers Won't Connect To D-Link Dir 615 Router
Aug 9, 2012
Everything was working fine, and various computers, tablets, and even my smartphone, all hooked up to my router without any problems. Somehow, this week, first my Asus U56E wouldn't connect (before all this it was automatic), and then my Google chromebook wouldn't connect either. The Asus is my main computer. And the reason for writing. I just mention the chromebook because they both quit connecting at same time, pretty much. But still my old xp netbook connects, as does my new google nexus7 tablet. And my nexus one phone. All hook to wifi, with no problem.I tried everything I could think of: This is a Dlink Dir615 router. Even set a new wireless network up, but it doesn't seem to connect. I ran the Windows Network Diagnostics, and it reset everything, and looked like it was fixing it, but no go. It said to investigate router or access point issues. I did what it said, and what has always worked with these problems. Turned off router for about 1/2 minute, then restarted it. Then did the same with the Cox motorola modem, *and* the router, but still, just doesn't want to connect. Wireless, that is...no problem with ethernet.Finally pushed the little pin in in the back of router, and reset the router entirely. Set all up again. Same thing happens, it just doesn't seem to recognize these two computers. So just to be sure, I used my nexus one as a wifi point: and these computers hook up fine, so it seems to be something with the router. My ISP is Cox. Cable. Router D-Link Dir 615, latest firmware. Modem Cox issue Motorola Surfboard. Antivirus Microsoft Security Essentials, and Win7 Firewall (I tried with these two turned off, but still no).I include the xirrus app's output...My wireless network on that app is 'phubai' and that is the one that won't connect. I had trouble bringing it up on Xirrus, too. It would only show when I would attempt to connnect, then it would disappear again.
ipconfig /all
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : geffASUSpc
rimary Dns Suffix . . . . . . . :
[code]...
View 3 Replies
ADVERTISEMENT
Jul 31, 2012
DIR-615 REv E, Originally had a Windows vista, windows 7, sony bravia tv (hardwired), sony blue ray player, 2 blackberry torch, an ipod, and whoever else happened to be there connected. After a router push button reset 7 reconfigure, only the windows vista and a samsung tablet will connect. The windows 7 computer sees the router but cannot see the internet. It does connect if hardwired thru the router.
View 1 Replies
View Related
Jul 11, 2011
Have another problem with my new rev B router.
I am trying to configure access control rules, but the list of computers (ip addresses and mac addresses) are empty, I have setup all of my devices with static ip's, they are all turned on and all have internet access. None of the systems including the one I am trying to configure the rules with are there, They don't show up in port forwarding either. Any one ever have this problem? I returned and DIR-825 Rev.b for this same problem because i thought it was defective.
I have tried rebooting the router, rebooting each pc and trying different ports on the router itself. There are wireless and wired computers that I am trying to setup but none of them show up. When I try to manually enter them into access control ie. 192.168.0.103 it will only allow me to put one computer in for each rule.
The old rev.A router this one replaced work perfectly fine with the same cables and computers setup the same way.
View 3 Replies
View Related
Feb 25, 2011
I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 1 Replies
View Related
Jul 1, 2011
So I set up my router and modem and I have the modem connected to the linksys router and the ethernet port to my computer. The computer with the ethernet cable works fine, but all the other laptops can not connect to the wireless.
View 14 Replies
View Related
Oct 24, 2012
just got internet today and set up the wireless on the router using a laptop connected through LAN. All computer now connect to the router through wireless except the the laptop that was used to set it up.
View 1 Replies
View Related
Sep 4, 2012
What would be the best way to connect 10 computers to a 4 port router?
View 1 Replies
View Related
Sep 4, 2011
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies
View Related
May 12, 2011
I have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router. I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too? If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable.
View 1 Replies
View Related
Jun 11, 2011
I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
View 1 Replies
View Related
Dec 5, 2012
I recently switched internet service providers from AT&T to Time Warner and ever since I have been unable to connect to my Netgear router with my computer's wifi. However, I have successfully connected my TV wirelessly to said router. One other note, my computer's wifi seems to recognize that the netgear router is there but it just refuses to connect me to the internet
View 7 Replies
View Related
May 12, 2011
I have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router.I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too?If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable
View 7 Replies
View Related
Dec 2, 2012
Just installed the E3200. Can connect other computers but not IOS devices to the router, except through the "guest" port.
View 2 Replies
View Related
Jun 20, 2012
I have and 880 W router. The LAN members can get out t o the internet. Now I want to configure NAT such that outside computers can access a couple of the machines using Remote Desktop (RDP). I am using Configuration Professional.
When I configure inside to outside, the remote computers can't connect to the target machines.When I configure outside to inside, the target machines acn't get to the internet.
When I try to use the advanced NAT definition wizard, I can't complete the task because the only inside pool (?) or LAN (?) is "designated" and not available to select. I can't free it up without deleting the one working NAT entry which is the one that enables all computers to reach the internet.
View 1 Replies
View Related
Mar 7, 2011
Am about to set up my new DIR-655. I noticed that the routers default IP is 192.168.0.1 The router it replaces used 192.168.1.1Since I have several devises on the network with fixed IPs 192.168.1.x (printer and Stora) and since I do not want to change them, can I leave them as is?Also, last time I changed the IPs that the router hands out, many computer could no longer see each other on the network, due to firewall issues. So, can I set the router to use a range like 192.168.1.xx even though the routers address is not changed? orshould I just change the router IP to 192.168.1.1 and change the range. Also do I need to change the mask if I do any of this?
View 3 Replies
View Related
Feb 24, 2011
We have two offices separated by a WAN.Office A is our main office that has all of our servers, including domain controllers and active directory, on our own network.Office B is a temp. office that is piggybacking off of our sister company's network, but the computers there still connect back to Office A servers to login/access services. However, Office B connects to the sister company's local domain controllers for DNS/WINS.We're having an issue where NetBIOS names of the other office are not always showing up when browsing for computers within the WinXP Windows Explorer (My Network Places --> Entire Network --> MS Windows Network --> domain A). It seems entirely random whether or not we can see the other office's computers. We can still ping/remote to them, but cannot browse to them.
It would normally be a non-issue, but some of our software apps require us to "Browse" to the network server location, rather than being able to type in the address, during installation. Can't install if we can't browse the Office A servers. Obviously has something to do with WINS not always populating/updating, but I'm not sure what or how to fix this.
View 2 Replies
View Related
Jan 3, 2013
My computers and my modem were connected in a D-link hub. Only one computer have an internet. What will I do to make other computers share the internet?
View 4 Replies
View Related
May 15, 2011
i recently bought the dir-615, and i have 4 computers connected to it, 2 desktops with ethernet cables and 2 laptops with wifi. I want to know how to limit the internet speed on some computers, because i sometimes need full speed on my desktop. Is it possible within the router configuration interface?
View 1 Replies
View Related
Feb 2, 2011
How do I get internet connect to all connected to the switch. One computer can access internet right now but the other cannot.
View 1 Replies
View Related
Apr 28, 2011
Is there a way to block specific computers on the LAN from specific web sites by the domain name? All I can see is that if I put, for example, www.facebook.com, it will be blocked from all computers on the LAN, whereas if I want to block only 192.168.1.3 for example, I have to use the IP address through the Access Control, which is much harder and ****e to some "work around" by the user.
View 3 Replies
View Related
Feb 5, 2012
192.168.0.1/Status/Device_Info.shtml, I have found LAN COMPUTERS that are not mine. How do I kick these away?Like this one: 192.168.0.169 Kajsas-iPhone 78:a3:e4:bf:48:ef
View 3 Replies
View Related
Dec 3, 2011
Bought DIR-655 from Amazon. Rev. B. Come with 2.00NA firmware. Updated to latest one, and there are a lot of problems, to most of them, I was not able find any solution. Here they start:
1. WIFI SPEED PROBLEMS.No matter what speed, parameters, channel, mode, etc I select, router keeps working on 20mhz channel width. So I never get speeds above 65 mbit. In absolutely same conditions, my DIR-300 B1 (with DD-WRT firmware) gives me stable 150mbit. SO I KINDLY ASK, MAYBE THERE IS A WAY TO FORCE "40 MHZ ONLY" OPTION?
2. PASSWORD PROBLEMS.Router came with no admin password, I enter new password, hit "update" it says - wait 20 sec, after that, login page is displayed, but, new pasword does not works! since it asks again for empty password!
3. FILTERING PROBLEMS.I need to block certain IP address to be accesed by all my computers. Say this is 111.111.111.111 . So I added inbound filter rule, to block access to that IP. It does not works - IP is still accesible.
4. MORE FILTERING PROBLEMS.Since above mentioned method does not works, I have to use "ACCESS CONTROL" feature. It does works, but it causes another problem, with access control enabled, all webpages with form submit stop to work. For example, if I'll have that feature enabled, when I press "post" on this webpage, it instantly will go to "this page cannot be displayed".
I bought this router solely for one purpose - I was happy with speed of my DIR-300, but I needed gigabit for my computers. So I thought, instead of buying separate switch, I'd better buy a router with gigabit. I was suggested to get TP-LINK 1043, since it's quite popular, alternate firmwares available and so on, but I refused to buy it, since I thought that some chinese company does not worth my attention. So I bought this D-Link (for almost 2x price of TP-Link) and having huge problems as you can see.
View 9 Replies
View Related
Jul 22, 2011
I have the DIR-655 Hardware version B1, Firmware version 2.00NA and everything has been working fine for about 3 months. Lately the internet connection to all the computers would just stop. All the computers are connected to the router and the router is connected to the cable modem and their is no indication of a problem. The lights are all on and the router status shows the cable status as connected and the network status as established. I can't open any webpages, or all the ping would time out. It happens on all device, Windows Vista/7 PC, Mac computer, Linux laptop, and iPhone/ iPad. The problem gets fixed when I reset the router or just wait about 5-10 minutes and the problem goes away. That normally isn't a problem, but it's starting to happen twice a day now and it is really really annoying when I'm playing games. I tried the FAQ and searching the forums, but in vain.
View 7 Replies
View Related
Jun 13, 2011
I'm having problems with my wireless computers seeing the rest of my network. This is my setup. ATT dsl modem into a 16 port netgear gigabit switch into dlink 615 Some computers are hardwired two are wireless All was working well before d-link with the linksys When im on a wireless computer i cant see the other computers hardwired to the network through the switch. When i take a wireless computer and plug it directly into the switch it see the rest of the computers fine.Something screwy is happening between the switch and the dlink router not allowing me to see my shared folders and printer over wifi.
View 1 Replies
View Related
Feb 5, 2012
I replaced a Dir-655 at a coffee shop, with a new dir-655 a few weeks ago. They keep calling and saying that Windows clients are not working and that Mac clients do.My first thought is that they are overloading the router but I would think that all computers would have problems not just the Windows computers. could the router be so bogged down that it takes to long for DHCP request for windows computers assigning the IP twice?
View 1 Replies
View Related
Feb 24, 2011
I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 5 Replies
View Related
Feb 20, 2013
HOW TO CONNECT MULTIPLE COMPUTER TO PRINT IN ONE PRINTER
View 1 Replies
View Related
Aug 14, 2011
A customer need diagram on how to connect 4 computers working together.
View 1 Replies
View Related
Aug 8, 2012
I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:
[code]...
View 4 Replies
View Related
Feb 9, 2012
I have a Mac, and my wife has a PC running Windows 7. Since we moved into our new house, our Dlink DIR-601 does not seem to want to send Wi-Fi to both computers at the same time. One of the computers always seems to lag or not have internet connection at all. The Mac also seems to work better and more often than the PC when both are trying to access wi-fi.
I have messed with the channel settings, security, and most other typical settings on the router to no avail. Is there a setting I'm missing or should I enable certain settings that will allow both computers to have the same signal strength and reliability.
View 5 Replies
View Related
Aug 5, 2012
And I can't seem to access Google and Youtube on my iPad, even Yahoo doesn't work. It all started when I updated my DIR-655 to the newest firmware 2.07NA because I wanted to have an Open NAT for my PS3 because it was set on Strict and I wasn't able to fix it other than updating my router. Now, Youtube works, but I can't play any videos, it's keep in a infinite loop. And I can't access some sites, such as Google, Youtube Facebook and Yahoo, on my iPad, it just won't load.
I just don't know what to do, I'm not really a crack when it comes to router, I don't know jack about my router to be honest, I know how to set the Wi-Fi, forward ports but that's basically all. It seems that it is a firewall problem, but I don't even know how my firewall settings works! UDP and TCP are set on Endpoint Independent but putting them into default doesn't do much, well it does nothing.
it is starting to get ridiculous, the DIR-655 is full of problems! My connections was always jumping, IP Conflict but now it's fixed, Flash videos wasn't able to run outside Youtube
View 14 Replies
View Related
Jun 19, 2011
I recently decided to buy a DIR-655 router to create a wireless network in my home. I hooked it up last night and speeds look fine with my rr standard 10mpbs service. However, I decided to check the wireless status and my macbook, macbook pro, and my desktop computer are only getting at most 130mbps. Is there anything i can do to maximize this and go beyond 130mbps
View 3 Replies
View Related
May 8, 2011
My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies
View Related
