D-Link DIR-615 :: After Reset Some Computers And Devices Will Not Connect
Jul 31, 2012
DIR-615 REv E, Originally had a Windows vista, windows 7, sony bravia tv (hardwired), sony blue ray player, 2 blackberry torch, an ipod, and whoever else happened to be there connected. After a router push button reset 7 reconfigure, only the windows vista and a samsung tablet will connect. The windows 7 computer sees the router but cannot see the internet. It does connect if hardwired thru the router.
View 1 Replies
ADVERTISEMENT
Dec 2, 2012
Just installed the E3200. Can connect other computers but not IOS devices to the router, except through the "guest" port.
View 2 Replies
View Related
Jan 19, 2013
I have an E1200 and if a device - such as my tablet or laptop - is left unused for a period of time - say for 4 or 5 hours - they won't reconnect to the router unless I do a power cycle/reset on the router.
View 5 Replies
View Related
Aug 9, 2012
Everything was working fine, and various computers, tablets, and even my smartphone, all hooked up to my router without any problems. Somehow, this week, first my Asus U56E wouldn't connect (before all this it was automatic), and then my Google chromebook wouldn't connect either. The Asus is my main computer. And the reason for writing. I just mention the chromebook because they both quit connecting at same time, pretty much. But still my old xp netbook connects, as does my new google nexus7 tablet. And my nexus one phone. All hook to wifi, with no problem.I tried everything I could think of: This is a Dlink Dir615 router. Even set a new wireless network up, but it doesn't seem to connect. I ran the Windows Network Diagnostics, and it reset everything, and looked like it was fixing it, but no go. It said to investigate router or access point issues. I did what it said, and what has always worked with these problems. Turned off router for about 1/2 minute, then restarted it. Then did the same with the Cox motorola modem, *and* the router, but still, just doesn't want to connect. Wireless, that is...no problem with ethernet.Finally pushed the little pin in in the back of router, and reset the router entirely. Set all up again. Same thing happens, it just doesn't seem to recognize these two computers. So just to be sure, I used my nexus one as a wifi point: and these computers hook up fine, so it seems to be something with the router. My ISP is Cox. Cable. Router D-Link Dir 615, latest firmware. Modem Cox issue Motorola Surfboard. Antivirus Microsoft Security Essentials, and Win7 Firewall (I tried with these two turned off, but still no).I include the xirrus app's output...My wireless network on that app is 'phubai' and that is the one that won't connect. I had trouble bringing it up on Xirrus, too. It would only show when I would attempt to connnect, then it would disappear again.
ipconfig /all
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : geffASUSpc
rimary Dns Suffix . . . . . . . :
[code]...
View 3 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Mar 22, 2011
I've just gotten a DIR-615 and replaced a working linksys G router. I configured it to work with my ipad (wireless N), my laptop-win 7 (N), and my desktop-vista (USB connected N). Everything works ok,. I'm using WPA personal, WPA2only, AES encryption, 3600, 802.11n only, auto 20/40 mhz channel width, invisible.
Here's the problem. As I powered up and shut down the laptop each day, it wouldn't connect to the router. I could see the connection, but windows said it couldn't connect. I had to go and unplug the router, count to 10, and then plug it in, and tell the laptop to connect and then it would connect it would be fine.
I thought it might be a compatibility with the laptop driver, but after powering down the desktop today, I had to do the same power cycle on the router to get the desktop to connect. So then I went and turned off the IPAD and had the same thing happen. 3 for 3.
I'm pretty sure its router settings and not the 3 devices, this never happened with the Linksys router, but I don't know what to change.
One other odd thing, when I view the network in windows, the DIR-615 icon is there (for about 15 secs), and then it disappears (for about 5 secs), and then reappears (15 secs), disappears (5 secs), etc. - almost like its dropping out for 5 secs... I haven't noticed a performance hit, but haven't transfer big files yet.
View 14 Replies
View Related
Jul 11, 2011
i have had a DIR-655 Rev. A router for years now and had no problems connecting my laptop to it well over 150m, the iproducts never got over 65m, i'm OK with that if they just won't but i would like to get there if possible. i went out and picked up a 2nd 655 (rev B) and flashed the bios up to the newest version 2.03NA and went in and mirrored all of the settings from the original router and then replaced the old router with the new one. the old router is not being used at this time though there are plans to use it as an access point later in another part of the house. i have updated the drivers for the wireless N card on my laptop (i can't remember the name of the adapter or the model, i'll provide that when i go home for lunch today). i've tried various settings for security, (i want to use WPA2 only, personal key, AES cipher, channel width 20/40 auto) i've even tried no security and it still won't connect over 65m.
View 14 Replies
View Related
Apr 5, 2012
We can only connect 2 devices at a time. Someone suggested that it may be a setting with my wireless router.
View 2 Replies
View Related
Feb 3, 2013
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies
View Related
Mar 21, 2012
I am currently having issues with the dhcp function on my DIR-615. The issue is some of my devices are never able to connect unless I set them up with static ip. Some of my devices are sometimes able to connect using DHCP but sometimes need to be set up with a static IP. In the log it says something along the lines of "sent out offer for IP 192.168.0.XXX" but the devices never receives the IP. The firmware says it is up to date. The hardware version is C1. Some of the devices having issues are PC's some are Macbooks and some are iphone and ipods. I'm not sure if it is related but when I look at who is using WAN some of the pc's who are connected to the internet have an ip address of 0.0.0.0.
View 3 Replies
View Related
Feb 15, 2013
I have a D-Link DIR-652 router, and I can see that it is broadcasting but I cannot connect through my laptop, tablet, or phone. Sometimes it will let me connect but other times it says it is unable to. I can connect when I plug into the router through a cable. I'm doing that now, and I did an ipconfig/all in case to see that:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kyle-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 10 Replies
View Related
May 12, 2013
For some reason, handheld devices cannot connect to our wireless dlink router. However, our HP laptop has no issue with connecting. Regardless of the make and model, no one else can connect at our home.
View 5 Replies
View Related
Nov 1, 2012
i've just a D-Link DIR-600 router last month and i successfully installed it and its working great. Until 2 to days ago, my brother told me that he can't conlnect to the wi-fi. I said that its working just fine and told him to just reset his phone. And then, my sister also told me that she can't connect too. I checked their devices like iPhone 4S and iTouch and it says "Unable to join the network....... Also phones of my friends can't connect also. It was just working fine. I haven't changed anything on the router's configuration. I already reset the router, unplug then plug it and its still not working. The router is connected to my laptop and I can still browse the internet. Its the wireless connection that is not.
View 5 Replies
View Related
Mar 1, 2013
I have the firmware 2.10NA. In my home we have about 4 laptops and 4 smartphones connecting to this router wirelessly and 3 of the laptops often lose connection for hours. We have tried unplugging the router and plugging it in again and factory reset and also resetting it through the IP address but the connection doesnt come back. Recently it has gone out for about 3 hours now. Also the wireless LED icon on the router constantly blinks is this normal? On the laptops where theres no connection it says limited connectivity. Is it possible that there is too many devices connected to the router or something. or could this be a problem with the laptops and not the router?
View 6 Replies
View Related
Jul 25, 2012
Can an IP conflict cause network issues for computers other than the devices that have the same IP? I have resolved an issue where someone was testing a device on our network and assigned a static IP that was already in use by one of our printers. Specifically, I am curious if the IP conflict could have caused issues with mapped network drives for other computers. I just seemed to have network gremlins for the 2 days of the IP conflict.
View 2 Replies
View Related
Nov 29, 2012
Region : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : ATT
I want to add more users to my home network and I couldn't, at this moment I only can connect 8 devices (12 devices at least) when I try to connect the next one its impossible, but if I take off one of the connected devices then the router allows to connect the new one.How can I connect more than 8 devices to my router ? (wireless)Also, is there any limits with Wireless MAC Address Filter ? because I can't add more than 8 MAC addresses in my old router I could do that.
View 4 Replies
View Related
Feb 11, 2011
I am currently using a DIR-655 for the home wireless network.DSL into a 2-Wire home portal (not wireless) and ethernet into the DIR-655.I need to connect a number of wired devices in a couple of different rooms. Some streaming HDTV content to other devices in other rooms. I'm thinking of the following:
-DIR-655 routing between the DSL subnet to the internet, the 2.4GHz wireless and a couple of wired devices.
-DAP-1522 routing between the 2.4GHz wireless, 5GHz wireless, and a few wired devices.
-DAP-1522 bridging between the 5GHz wireless and a few wired devices.
All devices will/may need internet access.HDTV content would be between wired devices and only over the 5GHz wireless (no HDTV to/from internet).Is the DAP-1522 the right device(s) for this?
View 2 Replies
View Related
Apr 20, 2011
I noticed a TON of random devices showing up in my Network within Windows 7. When I say a ton, I mean 739! I am not computer illiterate, but definitely not a pro. My router is WEP password protected, so I'm not sure on earth is going on here. I thought maybe I had a torrent program open that could be affecting this somehow, but I don't..
View 6 Replies
View Related
Jun 16, 2012
I recently purchased a newer Netgear wireless router ($50 or so) to replace an old one because I was constantly having to reset it to successfully get an internet connection on my computer, my phone, and our wireless printer. Now, the computer and phone have no problems picking up the network, but I always have to reset the router to get the printer to pick it up.
View 9 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
Jan 9, 2013
I have a DIR-655 that I have been using for a while (b1 revision). and suddenly I noticed my wifi speed fluctuates constantly. My lenovo Y580 sees speed drop to 130 immediately and then it can slowly progress to 1 Mbps until the hardware is all rebooted. Same happens to my Nexus 7, Dell XPS M1530 and to my roku. I have updated to 2.07 (since 2.10 is advised to avoid). And I have attempted changing channels or factory refresh.What Firmware version is currently loaded? 2.07What region are you located?
What ISP Service do you have? Cable or DSL? Cable (link speed independent of internet speed)What ISP Modem do you have? Stand Alone or built in router? Separate Motorola ((link speed independent of modem)What ISP Modem make and model do you have? Does not matter, router issue.If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. Not bridged
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic. Independent of issue, not a factor
Turn off all devices accept for one wired PC while testing. Wired works perfect.Check cable between Modem and Router, swap out to be sure. Cat6 is recommended. Wireless issue.
View 6 Replies
View Related
Mar 7, 2011
Am about to set up my new DIR-655. I noticed that the routers default IP is 192.168.0.1 The router it replaces used 192.168.1.1Since I have several devises on the network with fixed IPs 192.168.1.x (printer and Stora) and since I do not want to change them, can I leave them as is?Also, last time I changed the IPs that the router hands out, many computer could no longer see each other on the network, due to firewall issues. So, can I set the router to use a range like 192.168.1.xx even though the routers address is not changed? orshould I just change the router IP to 192.168.1.1 and change the range. Also do I need to change the mask if I do any of this?
View 3 Replies
View Related
Jan 22, 2013
my cable company tells me my router is not refreshing ?? even after i disconnect - reconnect ..the power is the button on top with the circling arrows for refreshing it .. i do have a static IP if that makes a difference .
View 8 Replies
View Related
Mar 4, 2012
I have DIR-655, 1.33NA. Recently, I noticed the clock in the router was off, so I wanted to correct it. Each and every time I go through the steps to reset the clock, using time server or clone computer time, or manual reset, after the save settings and reboot of the router, i find the router still displays the wrong time, and frequently reverts itself to a time on Feb 22, 2012. Same problem for trying to reset the DST settings, turning automatic time from server on and off, changing the time server polled. Additionally, I have forced the router to factory settings and rebuilt all of my configuration no less than 4 times.
So, since I recently had to trade out the cable modem because Cablevision fried it with their 'system upgrade', I'm also wondering if the same shenanigans also damaged the router.
View 4 Replies
View Related
Feb 24, 2011
We have two offices separated by a WAN.Office A is our main office that has all of our servers, including domain controllers and active directory, on our own network.Office B is a temp. office that is piggybacking off of our sister company's network, but the computers there still connect back to Office A servers to login/access services. However, Office B connects to the sister company's local domain controllers for DNS/WINS.We're having an issue where NetBIOS names of the other office are not always showing up when browsing for computers within the WinXP Windows Explorer (My Network Places --> Entire Network --> MS Windows Network --> domain A). It seems entirely random whether or not we can see the other office's computers. We can still ping/remote to them, but cannot browse to them.
It would normally be a non-issue, but some of our software apps require us to "Browse" to the network server location, rather than being able to type in the address, during installation. Can't install if we can't browse the Office A servers. Obviously has something to do with WINS not always populating/updating, but I'm not sure what or how to fix this.
View 2 Replies
View Related
Jan 3, 2013
My computers and my modem were connected in a D-link hub. Only one computer have an internet. What will I do to make other computers share the internet?
View 4 Replies
View Related
May 15, 2011
i recently bought the dir-615, and i have 4 computers connected to it, 2 desktops with ethernet cables and 2 laptops with wifi. I want to know how to limit the internet speed on some computers, because i sometimes need full speed on my desktop. Is it possible within the router configuration interface?
View 1 Replies
View Related
Jul 11, 2011
Have another problem with my new rev B router.
I am trying to configure access control rules, but the list of computers (ip addresses and mac addresses) are empty, I have setup all of my devices with static ip's, they are all turned on and all have internet access. None of the systems including the one I am trying to configure the rules with are there, They don't show up in port forwarding either. Any one ever have this problem? I returned and DIR-825 Rev.b for this same problem because i thought it was defective.
I have tried rebooting the router, rebooting each pc and trying different ports on the router itself. There are wireless and wired computers that I am trying to setup but none of them show up. When I try to manually enter them into access control ie. 192.168.0.103 it will only allow me to put one computer in for each rule.
The old rev.A router this one replaced work perfectly fine with the same cables and computers setup the same way.
View 3 Replies
View Related
Dec 23, 2011
I have a WBR-1310 D-link and was in setup this morning trying to fix my password cause the old one stopped working. Somehow I changed the password and no longer have access to the settings to change it to one that I can use to log on with my other wireless devices!!! Is there a way I can reset the whole thing? I mean something that makes sense to someone who is new to wireless internetting?
View 1 Replies
View Related
May 12, 2011
So, after everyone was raving about the 1.35NA version, I downloaded it. As I always do, I disabled my wireless NIC and connected an RJ-45. I saved my config to a .gws file. I uploaded the new firmware. When I went to reload my settings file, it said it was not a valid file. I tried multiple times. I even tried earlier versions of saved config files. Same thing.
So, I figured I'd revert to the 1.34NA firmware it was previously on. It wouldn't take it. So, I used the router config "system" page and chose "restore factory defaults". It didn't work. It still had the 1.35NA. So, I used the router's reset button. I held it in for 10 seconds, saw the system lights all blink in unison. I checked the config page and it was still on 1.35NA.
View 2 Replies
View Related
Jun 24, 2012
I initially set it up for static IP, which was a mistake for reasons I probably don't need to go into here. Having recognized my mistake, I've been trying to hard reset it so I can convince it to acquire its IP address by DHCP, but each time I reset it and return to the "First, select your camera" screen in the setup wizard, I'm faced with a single choice: the device as I first set it up for static IP. I don't seem to be able to convince it to give up that erroneous static IP address.I have read the FAQ section on hard reset. I've held down the reset button for a lot longer than 6 seconds while the cam was connected to power and ethernet, and I've watched it go through the sequence of flashing blue reset and WPS lights until it settles down, but this doesn't change the situation, evidently.
View 7 Replies
View Related
May 30, 2012
I am having a recurring problem with tcp sessions timing out / getting reset. I'm using the DIR-655 with PPPoE on a Qwest DSL line. Everything appears to be working fine (including my ipv6 tunnel) except for this issue where my long running ssh & database connections are being reset after a period of time.Currently have 2.03NA loaded, tried using 2.07NA but couldn't get ipv6 working correctly with the newer version.
View 7 Replies
View Related
Feb 23, 2011
I need to reset my 615 remotely. I will have someone on the other end push the reset button. I will then need to have them login to the 615 wirelessly. I'll establish a remote control session to their computer, and then I'll reconfigure the router settings. I know how to reconfigure the router just fine.
1) How long do you press the reset button, the manual says 10 seconds, is that correct?
>> 12 SECONDS
2) Once reset, is wireless turned on by default? I hope so, but the manual shows ENABLE WIRELESS unchecked... is that the default setting? Do I HAVE TO CONNECT VIA LAN CABLE TO "ENABLE WIRELESS" first?
>> YES
3) is the default ssid = "dlink" (no quotes)
>> YES
4) is the SSID invisible by default, or is it visible immediately after RESET?
>> IT IS VISIBLE AFTER RESET
The person on the other side can't access the router with a LAN cable, so once reset, the only way to get into the router will be via wireless; that's why I want to be sure I can do this before we do the reset.
View 5 Replies
View Related
