How To Connect A Printer To Support 2 Computers Using A Router
May 12, 2011
I have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router.I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too?If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable
View 7 Replies
ADVERTISEMENT
May 12, 2011
I have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router. I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too? If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable.
View 1 Replies
View Related
Aug 16, 2012
I was wondering if the EA3500 would support splitting the USB (buying a USB tree) to allow for both a printer and hard drive to connect at the same time?
View 1 Replies
View Related
Mar 1, 2012
Computer A main computer ........printer hard-wired to it.
Computer A wireless connection to router.
Computer B wireless too. no printer.
Computer C hard-wired to router. no printer
Can B and C 'address' and use the printer at A ?
View 5 Replies
View Related
Dec 6, 2011
a 4 port USB hub be used to connect 4 computers to 1 printer. Essentially using a usb hub to network a bunch of computers to a printer nearby
View 1 Replies
View Related
Feb 16, 2011
can wireless router support up to 100 user including support network printer
View 1 Replies
View Related
May 12, 2011
I have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router. I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.I would like a detailed explanation as to how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too?If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable?
View 1 Replies
View Related
Jul 23, 2011
I have managed to install a printer on my computer using the USB port on the E4200 router.I'm just wondering is it now possible to install this printer on other computers / laptops.I'm not really sure how the printer is assigned. Is there some network share I can connect to?
View 8 Replies
View Related
Jan 12, 2011
I have a wireless printer and want to upgrade my router. Will any wireless router support a wireless printer?
View 3 Replies
View Related
Nov 29, 2011
how can i share printer to other computers. i alreadily have 4 computers.. so ineed to share all files and software to all computers.
View 1 Replies
View Related
Aug 17, 2011
I have 2 computers(1 and 2) connected to a router with ethenet cables and printer connected to computer 1. With both computers on, both can use the printer. With computer 1 turned off, computer 2 cannot access the printer. So, what do I need to allow computer 2 to access the computer when computer 1 is off?
View 3 Replies
View Related
Oct 15, 2011
TSG SysInfo:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 2046 Mb[code]...
I am trying to share my printer with the other 2 computers on my home network. I have the printer connected to my XP machine. The other 2 computers are running XP and Windows 7. The Windows 7 machine is directly connected to the router and my computer and the other XP computer are connected wirelessly.I've shared my printer and given it a share name. But the other 2 computers cannot access my computer for some reason.I'm not sure why they can't access my computer to see the shared printer.
View 1 Replies
View Related
Jul 5, 2011
I have a desktop computer running windows xp, it is wired to my router. I am trying to network it together with my laptop that is running windows 7 and connects wirelessly.
View 1 Replies
View Related
Feb 20, 2013
How to print in one printer using multiple computer?
View 1 Replies
View Related
Sep 10, 2011
Have three computers ( 2 are XP one is vista) connected via wireless router one computer is considered a host computer sitting on a docking station which has the printers connected to it. In the beginning once everything was connected we could print from any computer wireless, then one day we had a power outage and for some reason we can only print from the host computer. How to get the other computers back online to print. All computers are still able to connect to the internet via wireless router (Linksys E1000) but not able to print except the host which is directly connected to the printers.
View 3 Replies
View Related
Jul 1, 2011
So I set up my router and modem and I have the modem connected to the linksys router and the ethernet port to my computer. The computer with the ethernet cable works fine, but all the other laptops can not connect to the wireless.
View 14 Replies
View Related
Aug 9, 2012
Everything was working fine, and various computers, tablets, and even my smartphone, all hooked up to my router without any problems. Somehow, this week, first my Asus U56E wouldn't connect (before all this it was automatic), and then my Google chromebook wouldn't connect either. The Asus is my main computer. And the reason for writing. I just mention the chromebook because they both quit connecting at same time, pretty much. But still my old xp netbook connects, as does my new google nexus7 tablet. And my nexus one phone. All hook to wifi, with no problem.I tried everything I could think of: This is a Dlink Dir615 router. Even set a new wireless network up, but it doesn't seem to connect. I ran the Windows Network Diagnostics, and it reset everything, and looked like it was fixing it, but no go. It said to investigate router or access point issues. I did what it said, and what has always worked with these problems. Turned off router for about 1/2 minute, then restarted it. Then did the same with the Cox motorola modem, *and* the router, but still, just doesn't want to connect. Wireless, that is...no problem with ethernet.Finally pushed the little pin in in the back of router, and reset the router entirely. Set all up again. Same thing happens, it just doesn't seem to recognize these two computers. So just to be sure, I used my nexus one as a wifi point: and these computers hook up fine, so it seems to be something with the router. My ISP is Cox. Cable. Router D-Link Dir 615, latest firmware. Modem Cox issue Motorola Surfboard. Antivirus Microsoft Security Essentials, and Win7 Firewall (I tried with these two turned off, but still no).I include the xirrus app's output...My wireless network on that app is 'phubai' and that is the one that won't connect. I had trouble bringing it up on Xirrus, too. It would only show when I would attempt to connnect, then it would disappear again.
ipconfig /all
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : geffASUSpc
rimary Dns Suffix . . . . . . . :
[code]...
View 3 Replies
View Related
Oct 24, 2012
just got internet today and set up the wireless on the router using a laptop connected through LAN. All computer now connect to the router through wireless except the the laptop that was used to set it up.
View 1 Replies
View Related
Sep 4, 2012
What would be the best way to connect 10 computers to a 4 port router?
View 1 Replies
View Related
Jun 11, 2011
I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
View 1 Replies
View Related
Dec 5, 2012
I recently switched internet service providers from AT&T to Time Warner and ever since I have been unable to connect to my Netgear router with my computer's wifi. However, I have successfully connected my TV wirelessly to said router. One other note, my computer's wifi seems to recognize that the netgear router is there but it just refuses to connect me to the internet
View 7 Replies
View Related
Nov 8, 2012
Region : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I'm trying to install the USB Printer Controller software in Windows 8 Professional x64 but I can't. Seems that the software is not compatible because I get an error window "Control center installation is imcomplete! Please reinstall again."I'm installing the official version of my download page [URL]Is there any solution to use the print server in Windows 8?
View 7 Replies
View Related
Dec 2, 2012
Just installed the E3200. Can connect other computers but not IOS devices to the router, except through the "guest" port.
View 2 Replies
View Related
Jul 29, 2011
My small network is connected to a large private network through a small 8 ports router with some management such as NAT, routing table, etc. In this small network I have a network printer/scanner. How can I access IT from the WAN side.
View 4 Replies
View Related
Jun 20, 2012
I have and 880 W router. The LAN members can get out t o the internet. Now I want to configure NAT such that outside computers can access a couple of the machines using Remote Desktop (RDP). I am using Configuration Professional.
When I configure inside to outside, the remote computers can't connect to the target machines.When I configure outside to inside, the target machines acn't get to the internet.
When I try to use the advanced NAT definition wizard, I can't complete the task because the only inside pool (?) or LAN (?) is "designated" and not available to select. I can't free it up without deleting the one working NAT entry which is the one that enables all computers to reach the internet.
View 1 Replies
View Related
Jun 8, 2012
I used a Belkin router for internet connection and connected to printer via ethernet cable. Belkin had frequent disconnects to internet, so I decided to use my D-Link DIR-655 router from another home. While it works well for internet, it will no longer connect with my printer, either via ethernet or wirelessly. I must carry my laptops to the printer and us a USB cable to get printouts. I am planning on moving to a Verizon 'hot-spot' and eliminate the routers completely soon and will maybe have this same issue. How can I resolve this matter?
View 8 Replies
View Related
Feb 28, 2013
I've been trying to connect my downstairs PC (No wireless Card) to my upstairs Wi-Fi printer through my Wi-Fi router and have not been able to do it, even after reading and resetting my printer's network card as directed by Brother's tech support 4 times.Actually, that's not true once I WAS able to access the printer's online Interface and change a few settings, but when it came time to submit my settings, everything just froze and I wasn't able to access the interface afterwards. (see my setup below) Here's the result of the first attempts (Node Type and IP Address are NOT good)IP range NOT good 169.254.x.x .Second and temporarily successful attempt (Node Type and IP Address are good) IP Range IS good 192.168.x.x.I know it would be easier to simply buy a Wi-Fi network card for my PC but I would rather learn how to do this manually.
View 7 Replies
View Related
Feb 12, 2011
How can I connect my laptop to my printer through my router?
View 1 Replies
View Related
Dec 15, 2011
I just changed my router and now cannot get my printer to work - I used the push button and pin on the wifi printer - it won't connect
View 2 Replies
View Related
Jun 16, 2011
Currently my network is set up so all machines are on the same workgroup.The server (Server 2008) is also part of this workgroup and has shares set up to only allow access if a client PC is logged in as the same user/password as the server uses.I want to set up a domain on the server so I can install Exchange, but if I do this, will my Workgroup PC's lose access to the server shares?
View 5 Replies
View Related
Jan 5, 2012
hp envy 100 eAll in one. Message says printer not connected to wireless network. Ran a wireless network test report. Says "More than one access point/wireless router ghas been found that matches your wireless network name (SSID). If you change your network name, you will need to configure the said on all wireless devices to match your new network ssid." Im assuming that since my computer is picking up many neighbors wireless signals
View 1 Replies
View Related
Sep 4, 2011
I'm trying to connect this printer:
HP 5110 OfficeJet
HP Officejet 5500 All-in-One series overview - HP Small & Medium Business products
for access to anyone that wants to print. There are about 7 PC's and I bought a USB to Ethernet adapter so it plugs from the back of the printer and into the Ethernet port on the router.I am trying to access it from a Mac OSX 10.5 computer and 2 Windows PC's...
View 5 Replies
View Related
