D-Link DIR-655 :: REVB Wired Connection Resets 100's Of Times Each Day
Jan 20, 2012
I bought a new DIR-655 REVB router, I already own the first version of the DIR-655 and worked fine, but the wireless range wasn't always the highest upstairs in my house and I was hoping with REVB they had improved the DIR-655's range. I'm not a big wireless guy, meaning if I can use a hardwire connection I will use it, so my house is pretty well wired, but for my daughter and son's ipod and Zune the wireless connection was weak in their upstairs bedrooms. It has been a disaster, the wired connections gets disconnected constantly, I say in the subject title 100's of times a day and I don't think I am exaggerating. It started with Netflix and I thought my son was crazy, how could new router do this, but it was doing it everywhere. It is hard to download files because I lose my connection. I have DSL through Windstream. My solution is to reinstall my old DIR-655.
View 8 Replies
ADVERTISEMENT
Dec 27, 2011
I was trying to port forward and could not get it to work. I run a Camfrog room sever of my desktop computer. I needed the TCP port 6005 open to the desktop and UDP ports 5000-15000. I enter that in to the Port forwarding setting but it never work. So later on today I try this I blank out the TCP 6005 in the port forwarding and letf the UDP setting in it and saved it. Then I went to the Virtual server settings and add camfrog3 in the name and put the TCP port 6005 in to it and check it and save the setting and bingo it work.
View 1 Replies
View Related
Jul 10, 2011
After I am on with Tech Support for 2 hours, they say the router is defective and will not work for Port Forwarding....!!
I have installed these in many locations and have not had a problem. ALL sites had a DHCP WAN.
I have PPPoE here on FIOS, with a great connection, no issues for 4 years. But lately my Intellinet Router has had to be reset 2-3 times a day, so I replaced it with the DIR-655 RevB.
Well, only for a little bit. The Dlink will NOT Port Forward... I need it to look at cameras, Remote Desktop, etc. Tech Support and I tried PF, and Virtual and DMZ with no luck. we tried many ports, with several internal IPs.
I have another DIR-655 in stock and it has the same results...
If I plug the Intellinet back in, all Port Forwarding works fine... no problem at all to any port. BUT it still has reset issues (not related to PF...)
Anyone else have PPPoE out there, with Port Forwarding issues?
I wrote Tech Support to notify me if they ever fix this glitch, and they sent back the instructions for Port Forwarding! Do they even read what we type?
View 2 Replies
View Related
Jul 4, 2011
Just got a new DIR-655 revB and upgraded to the latest firmware. I setup static ips, wireless, port forwarding, security, dynadns, etc. A few days after initial setup I noticed that my wireless devices could no longer connect and some of my desktops lost their ips (after their lease expired). After some digging and testing, I narrowed the problem down to DHCP dropping out and no longer assigning IPs. This happens after about 1 day of uptime. All the other router systems seem to work normally when this happens. Im not really running anything heavyweight on my network. I browse the internet and I have a few servers serving incoming connections. When I check the logs, I notice that every minute the following message is displayed: UDHCPD Inform: add_lease [ip of my win7 machine]. I have netbios enabled. Im thinking that the constant buildup of these requests may have something to do with DHCP dying later on.Is it too late to get a refund on this thing? Seems like a software issue so RMA will probably do me no good.
View 9 Replies
View Related
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Nov 14, 2010
BEFSR41 resets password to default by itself
View 9 Replies
View Related
Jun 12, 2012
Connection resets on browser and cannot upload at all.
View 2 Replies
View Related
Feb 19, 2013
My DIR655 is about a month old, works fine but randomly resets to factory default (loses configuration). Used it to get internet from an existing wired connection with gateway 192.168.0.1, therefore changed Network address of Dlink to 192.168.1.1 to make it work. Every so many days of working ok, it suddenly resets to factory default with no one touching the reset button. Have to restore the configuration from saved file which is a hassle.
Although the DIR655 is connected to a UPS, it shouldn't lose the settings during blackouts right?
View 1 Replies
View Related
Jul 21, 2009
I have a DIR-615 that is not responding to hard resets. It was working fine for about a week and then stopped handing out IP's to wireless clients. I attempted a power cycle and when the router came back up the wireless light was no longer on and it was no longer handing out IP's to Ethernet clients. The power light is solid, internet light lights up when connected to my modem and flashes intermittently, and the Ethernet lights light up in response to connecting clients. I have attempted to hard reset the router to no avail. I also tried statically assigning 192. 168. 0.120 to my NIC to see if I could access the router config but that doesn't work either. It's almost as if the default ip address and range for the LAN on my router have changed and DHCP was turned off.
View 11 Replies
View Related
May 6, 2011
The problem is that my internet connection either randomly loses connection for about 5-10 seconds until it gets back online or disconnects all together. When it disconnects and it can't get back online on it's own, I have to pull the power plug and plug it back in. My sister in law and I are sharing internet since our houses are about 100 feet between each other. We are using one modem, and two routers. All we did was just plug the second router to the first router and it worked! We didn't configure anything in the router control panels, we basically just plugged and play. Since it's been kicking us off or resetting on us, I feel it might be something that we had to configure in the two routers. But I don't know what to configure. Primary House Modem Belkin Router (we are wired and wireless) 150ft cable (LAN'd on Belkin, WAN'd on Linksys) Linksys Router (sister in law is wired and wireless) Secondary House
View 2 Replies
View Related
Mar 21, 2012
Recently replace my DIR-615 (it died after about 3 years of steady use) with the 825.Followed CD setup wizard, adjusted some manual thing as well. Am experiencing slow streaming speeds on various websites. A lot of 'loading' pauses within a youtube video for example when I never used to have any stutter at all on my old router.On a cable internet connection with a standard cable modem (no router in it).DIR-825 FW: 2.06NA HW: B1.Wired connection to router, not trying to steam over wireless.Speed tested at 14Mbps down which is what my provider (cogeco cable) promises.
View 1 Replies
View Related
Feb 17, 2012
I have two separate wired networks. Network 1 has a wireless router (an adsl modem). Router of the Network 2 is not wireless. Can I replace router of network 2 with DIR-600 to make a wireless connection between these two network segments ?
View 5 Replies
View Related
Apr 12, 2011
I should start by saying I am no novice when it comes to networks but this router has been nothing but a issue since day one.
*The Setup - 2 wired PCS, 2 Wired Macs, 1 Wireless Iphone, 1 Wireless Ipad.
WPA2 Only / AES key, Channel 6, G/N only, Hidden SSID.
*The Problem - 95% of the time the wireless and wired is running fine. However, Sometimes randomly webpages on the computer will stop loading... but heres the kicker... other internet connected programs like Ventrilo, or torrents, or games will still be working and running from the net like there is no problem. When this happens the internet browsers on the macs and PCs will say page cannot be displayed instantly. Happens to all computers at the same time. After about 10min the webpages will load again. I have 16mbs internet and while this is happening my games and voice chat programs do not go up in ping at all.
I have turned off QoS since that made the most sence... but other then that I have no been able to figure it out. I even turned off wireless while it was happening and it still didnt fix it. A sure fire way to fix it is to restart the router.
I am 100% stumped. Do I just have a bad out of the box router? it is only 2 weeks old.
View 14 Replies
View Related
Oct 4, 2011
I have problem connecting Samsung (series6) TV to DIR-600. TV wired connection does not work with DLINK DIR-600 150. Is there a work around ?
Config :
DIR 600 is working in access point mode
Check list : Cat-6 Patch Cord - works (brand new works fine with laptop)TV network port - works (works fine with aztech ADSL/Switch)
View 14 Replies
View Related
Apr 3, 2012
Why there is low speed using D-Link in compare with LAN wired connection?
View 9 Replies
View Related
Aug 19, 2012
I originally installed my DIR-655 as a wireless access point, not using the wired ports at all, and it worked fine like this. Trouble with my trying to set up my Bell router/modem with port forwarding prompted me to change my configuration so my Bell router /modem is now only a modem, and I am using the DIR-655 as a wired as well as wireless router. I have a separate network server and so don't use the DHCP on the DIR-655, and I only use one port to connect to a separate gigabit switch that serves the network.
I am finding that the wireless connection works really well with the few wireless devices I have connected (mainly an apple tv, and a MAC book) but my wired connections to the internet "feel" slow, sometimes with a significant delay before links to sites are established. I click a link, and wait for several seconds before the site shows up in the browser; sometimes after that the same site seems to respond at normal speeds, other times there are added delays.
Is there something in the DIR-655 settings that would cause this? The wireless connections seem fine.
Should I be looking at a new router/modem (rather than separate boxes)? If so what would be the equivalent D-Link model?
View 5 Replies
View Related
Nov 25, 2011
My D-Link DIR-300 very often loses connection on wired and wireless connections. It stops connecting to Internet randomly i.e. any URL typed in from the browser times out.I connect various devices such as desktop, laptop, ipad2 over wired and wireless connections and the behavior is the same from all devices when this problem occurs. If I make a direct connection to the DLS modem, it works fine for the whole day, without these issues.I also observed IP address conflict messages and my desktop does not connect to Internet if I am running VPN on my laptop, at the same time, occasionally.When this occurs, I am able to login to the router and can see the WAN status and the DHCP address being allocated to the router. I can even do DHCP release and renew, but that does not fix the problem.
View 3 Replies
View Related
Oct 18, 2011
Since buying and using this router about 1 month ago, I've had latency problems. With my Linksys WRT54GL, my latency has always been consistent. However, pinging to google (as a benchmark), my ping is a good 50-70 higher than directly plugging into my router. Directly into my modem I get 10-20ms pings; through the router, I get minimum 60ms up to 100ms spikes. When using the Linksys router, my ping would be 20-30s. I really hope it's just a settings problem. I've turned off QoS and wireless to isolate the connection to just wired, but it still persists. I really hope I can fix this problem, else I am going to buy a different router over the weekend. I can't play FPS games like Bad Company 2 with such high latency.
View 1 Replies
View Related
Sep 7, 2012
I have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.
View 3 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Jan 18, 2012
I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies
View Related
Jan 4, 2013
I recently upgraded my DIR-655 to firmware version 2.10NA , 17, Oct, 2012.Ever since the upgrade, on a wired connection the router will occasionally not serve pages. This shows up as a DNS error, stating the DNS lookup failed. If I wait a bit and reload the page, it will sometimes resolve itself. If I bypass the router and plug directly into the modem, the problem goes away completely.This is happening on my MacBook Pro, OS X 10.7.5, any browser (I use Chrome mostly, but also Safari and Firefox have the same issue). This is not happening on my Linux laptop which I use wirelessly, or my iPhone or any of my wireless clients, though the same MacBook occasionally has trouble connecting if I DO try to use it wirelessly (I receive a connection timeout and cannot log on). I'm not certain at this point if the trouble is with the router or the computer, but it only began happening (and happened immediately) after I installed the most recent firmware.
My security setup, if for any reason it matters, is WPA2 with MAC address filtering.
View 4 Replies
View Related
Feb 16, 2011
I setup a D-Link DIR-825, VB1, Firmware V2.00NA about a month ago. We have 3 Macs here at home - 1 brand new iMac, a G4 Powerbook, and an old G4 / 933 Tower. The G4 tower is connected via ethernet. The other two through Wi-Fi. My problem is that I can barely use the internet for even a few minutes on the G4 tower, connected via Ethernet, without losing my connection. I can be in the middle of loading a page or an image, and suddenly it will say "Waiting for xxx.com". Then if I try to go to Google.com or something I will invariably get "Looking up xxx.com". The connection usually returns on it's own, but it can take up to 3 or 5 minutes. When I get this message on the ethernet G4 tower, I will also have lost connection on the wireless Macs. For the first couple of weeks the tower was not connected and we were just using the two wireless Macs, and they were working well. It seems that as soon as I hooked up the G4 tower via ethernet, connections became very flaky and intermittent all of a sudden.All the Macs are configured for DHCP. We have a Time Warner cable modem. The G4 tower had previously been used at my office with it's own dedicated DSL modem / router, and it worked flawlessly for months at a time without dropping a connection. I've tried rebooting the modem, then the router, then turning all the Macs back on, several times. Same result. I just tried loading the new firmware but it didn't work. Said the Gateway was too crowded or something.
View 1 Replies
View Related
Dec 3, 2012
I have a DIR-615 router (h/w ver E4 and firmware 5.10) that needs to be powered off and then on again several times in a day (a reset of sorts).After being on for sometime, most devices lose connectivity to the router and new devices cannot connect to it.After being powered off and then on again, everything works fine.
View 4 Replies
View Related
Mar 27, 2013
Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
View 1 Replies
View Related
May 16, 2011
It started rarely, now it happens alot! the only way to get internet back is if I unplug the power cord from my STUPID router.
View 14 Replies
View Related
Mar 29, 2012
I have an airlink ar525w wireless router. My wireless connection drops out every few hours and I have to reset my router to get it up again. My wired connections work perfectly. Also, I am able to see my network as available and with full signal strength from windows but connecting to it doesn't do anything (just says connecting forever). This is not isolated to one computer. I have tried it with laptops, desktops and smartphones. The strange thing is that it works perfectly (hasn't dropped a connection for one month) if I have wireless security disabled.I have tried different types of security (WEP, WPA, WPA2), different channels (all 11 channels), assigning static IP addresses to all my devices and turning off the DHCP server on my router. But none of these settings fix the problem. would be willing to buy another router, but I was reading through reviews on newegg and every router that I saw reviews for has a few people experiencing the same problem that I described here. Is this a widespread problem that I have to live with or does this have something to do with my router specifically?
View 3 Replies
View Related
Mar 12, 2011
My nephew's MAC continuously times out when trying to connect to my wireless connection. Details are:
ISP=Orcon
Modem/router=Dynalink: RTA1025WE
No other network equipment.
Wireless connection
Authentication=WPA-PSK
Browser=Firefox
MAC Book Pro, OS=10.6.2
View 2 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Dec 28, 2012
For the last several months, but progressively worse, my internet drops due to the DNS Server not responding. This happens across my whole network and the only fix I can come up with is to reset the router every time it does this. At this point I am thinking a new router is in order (but do not have the money atm), I am using a D-Link DIR-625 V. C1 Firmware 3.08 router and a Motorola SB6120 modem. Is there another permanent fix for this problem is or my router on it's last legs? Would setting a new DNS Server on my router work?
View 11 Replies
View Related
Oct 26, 2012
I have fiber optic Internet with static ip and keeps disconnecting at very random times. It started 3 weeks ago, before it worked perfect. Most of times dcing 3 times per hour. But sometimes working for hours without dcs. Usually disconnects only for half minutes then reconnect, it can be very annoying. The provider keep saying that need change router. I'm tried three different of routers already, but keeps disconnecting. I'm tried connect the net directly into my cpu, without router, but not worked, dc-ing too. I tried ping the default gateway when its disconnected, and its saying: request timed out.What else can i try? It should be, that the provider has too many clients, and their router collapsing?
View 2 Replies
View Related
May 9, 2012
We recently moved and upgraded our internet service from 1.5 Mbps to 4Mbps with CenturyLink. However, since our service was activated last Thursday, the internet connection intermittently drops and will not recover unless I reboot the modem. The period of up-time will last anywhere between fifteen seconds to several hours, usually falling along the five-to-ten minute range. No difference when using ethernet/wifi. The DSL light stays on, and the Internet light remains on as well.
View 11 Replies
View Related
Jan 3, 2013
My internet connection is being dropped multple times a day. I have to run the troubleshooter each time and the connection is restored. How do I figure out if this is some setting in my wireless adapter or if it is the wireless adapter itself?
View 2 Replies
View Related
