Connection Resets On Browser And Cannot Upload At All

Jun 12, 2012

Connection resets on browser and cannot upload at all.

View 2 Replies


ADVERTISEMENT

Internet Connection Randomly Disconnects Or Resets

May 6, 2011

The problem is that my internet connection either randomly loses connection for about 5-10 seconds until it gets back online or disconnects all together. When it disconnects and it can't get back online on it's own, I have to pull the power plug and plug it back in. My sister in law and I are sharing internet since our houses are about 100 feet between each other. We are using one modem, and two routers. All we did was just plug the second router to the first router and it worked! We didn't configure anything in the router control panels, we basically just plugged and play. Since it's been kicking us off or resetting on us, I feel it might be something that we had to configure in the two routers. But I don't know what to configure. Primary House Modem Belkin Router (we are wired and wireless) 150ft cable (LAN'd on Belkin, WAN'd on Linksys) Linksys Router (sister in law is wired and wireless) Secondary House

View 2 Replies View Related

D-Link DIR-655 :: REVB Wired Connection Resets 100's Of Times Each Day

Jan 20, 2012

I bought a new DIR-655 REVB router, I already own the first version of the DIR-655 and worked fine, but the wireless range wasn't always the highest upstairs in my house and I was hoping with REVB they had improved the DIR-655's range.  I'm not a big wireless guy, meaning if I can use a hardwire connection I will use it, so my house is pretty well wired, but for my daughter and son's ipod and Zune the wireless connection was weak in their upstairs bedrooms.  It has been a disaster, the wired connections gets disconnected constantly, I say in the subject title 100's of times a day and I don't think I am exaggerating.  It started with Netflix and I thought my son was crazy, how could new router do this, but it was doing it everywhere.  It is hard to download files because I lose my connection.  I have DSL through Windstream.  My solution is to reinstall my old DIR-655. 

View 8 Replies View Related

Broadband :: How To Get Internet Connection On Two Browser

Aug 14, 2011

i already have net running on my default browser firefox.but i want the net to run on my other browser chrome........

View 2 Replies View Related

Intermittent Browser Connection To Internet

Apr 12, 2011

I work in a small school and recently we started to have a problem with browsing the internet. We don't have an 'IT Department' as such as I'm the closest thing to it.When a browser is opened it will not connect to the homepage, or if it does its generally from cache, instead an error message about not being able to connect to server will appear. Now if you hit refresh you might or might not connect to the webpage in question but you can gurantee that it will take a long time to make that connection even on an undemanding site like wikipedia.The odd thing is that when connected to a speed checker it gives no surprising results, speed is normal. Also when downloading a file or the latest linux live distribution torrent I can achieve maximum speeds available to us.We use a selecction of Macs & PCs mostly connecting through ethernet cabling although connecting wirelessly is no different. We use BT 2Wire 2700HGV Business Hubs. I can't think of any changes our end that have happened to cause this and our internal network connections run just fine. I have tried pinging from the command line and it looks ok to my limited expertise, no lost packets.

View 3 Replies View Related

Linksys Wireless Adapters :: AE2500 Connection Drops On Upload Test?

Nov 19, 2011

I got the AE2500 Dual-Band Wireless-N USB Adapter.  It connects just fine but it seems to like to disconnect on me.  Mainly seems to do it when playing online games and testing out speed test.net  It does "Download" test fine, "Upload" test is iffy.  Sometimes I can run the test 1-2 times sometimes three times, but seems to always drop connection on one of the "upload" tests.

View 1 Replies View Related

Cisco Wireless :: 5508 Slow Connection Rates 264kbps Download And 366kbps Upload

Feb 14, 2012

We recently did a forklift upgrade on our campus and installed 3502i's, 3502e's, and 11 5508 WLC's. Our students are complaining about slow connections in several areas of the campus.In our testing and basic trouble shooting our Apple laptops have no problems but our windows laptops are showing a very slow connection rates 264kbps downloand and 366kbps upload. The window device has current drivers installed.

View 14 Replies View Related

D-Link DIR-655 :: 4 Mbps Upload Via CAT5 But Only 1 Mbps Upload Via N-format Wireless?

Jun 30, 2011

I just upgraded my cable modem from the Motorola Sufboard 5120 to the DOCSIS 3.0 capable 6120. Provisioned it with Comcast and their "Blast" service (supposedly it caps at 16 down, 2 up).

I had, in the past, used my desktop via N-format wireless (DWA-525 N-format PCI adapter and DIR-655 N-format router) to do a speedtest.net test. I was getting 16 down and 2 up (as advertised). When I switched to the 6120, I did a speedtest.net test again to see what kind of gains, if any, I was getting.  Turns out, I was getting 20+ down (nice improvement) and 1/2 Mbps up (a fourth of what I used to be getting?). Called Comcast. They "sent signals" (don't they always?) and claimed that it fixed it. My download speeds increased a smidge (about 22), but my upload speeds were still .5. Called Motorola, they had me do a few things and now I get 1 Mbps up and 27 - 30 down via wireless.

My download speeds are great. I'm content with that. If I hardwire from the cable modem directly to a ****py old laptop, a speedtest.net shows 4 Mbps up. So why do I get such a high upload speed when hardwired (4 Mbps), but a fraction of it (1/4th) when wireless? I'm not using any other devices to sap bandwidth (some are connected -- i.e. another desktop, my Droid phone, etc., but aren't actively pulling packets). And why would it go from 2 up (on my desktop via wireless in the past) to only 1 up (via wireless now) when the setup is the same across the board (as best I recall) other than upgrading my cable modem.

Since I get 4 up when hardwired straight off the cable modem, I assume my DIR-655 is slowing me down somehow. How to pick up the pace a bit? I've already tried the standard "power cycling", etc.

Oh, and the reason I go wireless -- my cable modem and wireless router are in my game room in the basement for my PS3. My desktop computer (and the wife's desktop computer) are two floors directly above it in our "office".  Signal strength is "excellent" ... always has been.  And again, pretty much everything is the same.

[URL]

View 12 Replies View Related

Router Consistently Resets Itself

Aug 8, 2011

Every time i load up EVE online my router resets as if id pressed the reset button.Its a Netgear, model number CGD24G, and my ISP is Roadrunner Cable. It happens consistently every time i get into the Game, Eve Online, and it just happened recently, as ive been playing it these past few days.

View 3 Replies View Related

Edimax Router Resets Automatically?

Aug 14, 2012

So I have recently bought a modem which has Wi-Fi in it..I use every holidays! When I bought the modem, I set the modem correctly by putting its CD in my PC & following it..But the last week when I opened the internet, the internet was telling that DNS server failed to look-up.. or something like that in my Google Chrome.So I put the disk in my PC.. And again I set the modem correctly by following CD's instructions..Then the internet started to work again..Now today also when I opened the internet the same manner it shows a message.. set the modem again..So my question is why is this happening ??And yea also the Wi-Fi's password setting has been also changing from WPA to Open..Is there a way to set this modem correctly.. without being setting the modem everytime.

View 1 Replies View Related

Internet Disconnects And Resets IP Continuously?

Nov 5, 2012

my internet will disconnect sometimes for a split second, for a few minutes or for hours at a time. My boyfriend and I have directly connected his computer to the modem, and the internet is working. I have also called our ISP and asked if there are any problems on their end, and our modem is working fine with no issues. So we had come to the conclusion that our router was at fault. It was a Linksys E1500, we investigated online and found that many people had the same problem and it was solved through buying a new router. We have since bought a new router a D-link N150, it worked for a week and a half, but now our internet is back to disconnecting randomly throughout the day. We have tried resetting the router back to factory settings to an avail.

View 1 Replies View Related

Router Resets Itself Every Time Power Goes Out?

Sep 7, 2012

I use an adsl router to make a wireless network in my room.I keep the network hidden and also keep a password. The problem is, the power goes out twice a day for a minuite, and my router automatically resets itself when the power comes back on. Because of this I have to keep going to the router settings, set up a password and hide the network twice a day.

View 1 Replies View Related

Internet Keeps Slowing Down After Multiple Resets?

Dec 31, 2012

This problem only seemed to arise after messing with my MTU a few days back to 48 so I could play an online game with lower ping, but have since changed it back to 1500.Since then, my internet has been slowing down every 30 minutes to an hour and won't speed back up until I reset the router and the problem continues after that.I've fresh installed Windows 7, updated the Firmware on my DIR-636L, changed my DNS multiple times, unhooked my DIR-636L and have been only using my SURFboard SB6141 modem and the problem has yet to be fixed.I took a Netalyzer test and here are the results. I bolded the important stuff:

Major Abnormalities
Your ISP's DNS server is slow to lookup names
Minor Aberrations
The measured network latency was somewhat high
Network packet buffering may be excessive

[code]....

View 2 Replies View Related

Cable Modem Constantly Resets - How To Stop It

May 17, 2012

For the past few months my cable modem has been rebooting (Power light stays on the rest turn off). I have replaced the modem and have had two technicians out here to no avail. The resets happen often during heavy use.The only errors that seem to happen frequently while this occurs are..

5/17/2012 20:33120207004Configuration File CVC Validation Failure
5/17/2012 21:54200005003Started Unicast Maintenance Ranging - No Response received - T3 time-out
5/17/2012 21:54200006003Unicast Maintenance Ranging attempted - No response - Retries exhausted
5/17/2012 21:54180002003UCD invalid or channel unusable
5/17/2012 21:54140206003DCC aborted unable to communicate on new upstream channel

[code]...

View 1 Replies View Related

2701HG-B Modem Resets Randomly When Using Wireless

Apr 28, 2011

I have a 2Wire 2701HG-B modem/router provided to me by AT&T for my DSL service. I have one issue and a seperate question sort of related to it.The issue I'm having is that whenever a laptop gets online with wireless internet the modem will randomly reset connection.Some times it will do it every 30 seconds, some times it will be once an hour or even more.It works perfectly fine on any laptop when plugged in with Ethernet cable but only with wireless it will glitch out. It does this whether it is the only computer online on the network, and also when there are a few others online so it's just the simple fact of the wireless resetting it somehow.I've done lots of google searching and some people say changing the line pair settings fixed it for them. Some say changing from b/g mode to just g mode fixed it. I've tried every thing that I've come across and nothing has worked so far. Apparently this is a very common problem for this model I just can not find the right solution that has worked for other people, to work for me as well.

if I were to want to make this modem/router just a modem and hook up my own router for N wireless would this be possible? I know I've read ways about putting combos in DMZ mode or something but I don't really know what I'm looking for because everything is worded different in this modem's settings.Can any one provide any insight as to if this is possible, and if it's even worth it to do so? Mainly worried about the first thing I mentioned though, this is just a side note.

View 1 Replies View Related

D-Link DIR-655 :: Randomly Resets To Factory Default

Feb 19, 2013

My DIR655 is about a month old, works fine but randomly resets to factory default (loses configuration). Used it to get internet from an existing wired connection with gateway 192.168.0.1, therefore changed Network address of Dlink to 192.168.1.1 to make it work.  Every so many days of working ok, it suddenly resets to factory default with no one touching the reset button.  Have to restore the configuration from saved file which is a hassle.

Although the DIR655 is connected to a UPS, it shouldn't lose the settings during blackouts right?

View 1 Replies View Related

D-Link DIR-615 :: Device Is Not Responding To Hard Resets

Jul 21, 2009

I have a DIR-615 that is not responding to hard resets.  It was working fine for about a week and then stopped handing out IP's to wireless clients.  I attempted a power cycle and when the router came back up the wireless light was no longer on and it was no longer handing out IP's to Ethernet clients.  The power light is solid, internet light lights up when connected to my modem and flashes intermittently, and the Ethernet lights light up in response to connecting clients.  I have attempted to hard reset the router to no avail.  I also tried statically assigning 192. 168. 0.120 to my NIC to see if I could access the router config but that doesn't work either.  It's almost as if the default ip address and range for the LAN on my router have changed and DHCP was turned off. 

View 11 Replies View Related

Cisco WAN :: 6509 - TCP Resets And Connections Time Out

Apr 19, 2012

Any input on this: We had a DMZ server that customers used to get to their information. This sever was the front end to get to the host that holds the customer information. The server was in a DMZ, the path from Server to host was: through DMZ switch, through firewall to 6509 switch to the host. We never had a problem with this, the server application was old but worked great.
 
We have since moved to having someone host the front end. The front end connects via Internet to their third party router, to the same DMZ switch through same firewall, to same 6509 to host. The third party router is configured with VPN tunnel to remote end. Connection comes through Internet to their router and is Na Ted then goes to DMZ, to host.
 
Internet---E1 (Router NAT) E0 ---ASA---6509---Host
 
We have had nothing but trouble with this connection. Customers are complaining because the connections time out so much. We see a lot of tcp resets on the host to the Router NAT ip address (which is the DMZ side interface). The resets usually show "Invalid Query Header Length". The current connection is capped at 1Mbps, with average response times of 50ms (spikes to 200).
 
They keep telling us that something is wrong with the host, but I have to believe the latency is causing us problems. I can see that bandwidth seems to be enough as I do not see the interfaces utilizing that much, averages about 300K. I was wondering could the IOS NAT be contributing to the problem as well?

View 2 Replies View Related

Cisco Firewall :: ASA 5550 - TCP Session Resets

May 1, 2012

Our users are using Xmanager to connect to a NNM connection which is going through a Cisco ASA5550 with 8.3. The session of Xmanager is getting terminated exactly after 1 hour and the users have to reconnect it again. How can we make the session to be up always, when I am bypassing the Firewall its always up.

View 2 Replies View Related

Sharing :: Network Internet Access Resets In Every 30 Minutes?

Nov 16, 2011

ON WINDOWS 7 every 30 minutes or so i notice that "turn off network discovery and turn off file and printer sharing keeps resetting to ON" this is odd? i have to keep going and turning them off manually all the time.

View 2 Replies View Related

Linksys Cable / DSL :: WCG200G Wireless Resets The Modem?

Apr 27, 2012

WCG200G ver.2  resets everytime i use wireless
 
Firmware Version: 2.0.3.6.12-0608

View 8 Replies View Related

Cisco Routers :: WRV210 Resets To Factory Defaults?

Sep 23, 2010

I purchased a WRV210. I configure the device, setup all my tunnels, WAN, LAN, Wirelss, Security, etc. and within 48 hours it "automatically" resets itself back to "out of the box" settings. This has happened twice now - once after it ran for about 4 days and the second time after only 5 or so hours of opperation.
 
Is this a known issue with the device? Is there an update I need to apply? I'd give ya my current FW version but I cannot login as it appears to have rest once again lol - and my tunnels are down so no remote access.
 
I made a backup of the config after the first unscheduled reset - (.bin file) so I have my settings ready to restore.

View 6 Replies View Related

Cisco Routers :: SRP527w Resets To 1970 / 1 / 1 On Reboot?

Jan 11, 2012

I bought a new cisco srp527w (K9-G4) and all seems fine but when I reboot it the date resets to 1970/1/1I upgraded it from vrs 1.01.09(001) to 1.01.24 but it is still doing it.I havent yet got it onto the internet as it wont be going live until it goes into a client site, so I cannot set it to NTP to see if this will work around the problem of setting the date and time manually.

View 2 Replies View Related

Cisco Wireless :: Radio Resets When Enabling New SSID 7.3.1

Feb 24, 2013

Running vwlc 7.3.101 and encountered a smaller issue.When you enable / disable a SSID, all AP's reset their radio interfaces... causing everyone to drop their connection.

View 4 Replies View Related

Linksys Wrt4gs - Wifi Hard Resets Every Power Loss?

Jul 12, 2011

I'm using Comcast cable with a Linksys WRT4Gs wife router. I live in an older building which loses power for a little while (10 minutes or so) with every big storm. Every time the power comes back the linksys router completely resets...I have to plug into it and change the SSID, turn security back on, enter the password again, and then I'm fine...can I prevent this from happening? Before I plug into it I see both networks available (mine under my name, but I can't connect to it, and linksys as a public network), is there a step I'm missing to make my router remember it's identity?

View 1 Replies View Related

Linksys Wired Router :: BEFSR41 Resets Password To Default By Itself

Nov 14, 2010

BEFSR41 resets password to default by itself

View 9 Replies View Related

Cisco Wireless :: Two 1252 On Ports 1 And 2 On Catalyst 3550 Resets

Oct 12, 2012

I have two 1252s on ports 1 and 2 off a Catalyst 3550. No other device on the switch except the fiber uplink.

Initially 1252 #2 (on port 2) resets for no reason at no specific time. We did not have a problem with 1252 #1.

The show ver on #2 does indicate that equipment resets due to power. I figured the 3550 is having problems powering two 1252s so had this AP on PWRINJ4 (validated its not drawing power via show power inline).

Today, #2 does not reset. However, now #1, which is the only device using inline power is now resetting. Same thing, reset due to power. Same weird behavior, at no particular time.

I've also have "no cdp enable" out off each port as i understand CDP sometime cause device to not boot up (15w versus 15.4w issue).

Both AP btw are Standalone IOS.

View 1 Replies View Related

Linksys Wireless Router :: WRT320N Resets Wi-Fi Settings To Default?

Dec 1, 2011

My router automatically sets the wireless network settings to the original default. Sometimes after 1 hour sometimes after a week. It resets to automatic instead of the manulal settings I use for configuration. Changes the SSID to Linksys and disables wireless security.

View 5 Replies View Related

Cisco Wireless :: 1141n AP Radio Interface Resets After 2 Hours?

Jul 10, 2011

I have a couple of 114n APs in my network and the CAPWAP uptime and AP uptime are almost the same. But there is one which always resets after some time. I have moved across to another switch port but the issue persists. I have other 1141 and 1131's on this switch and no problems. The keep alives between the AP and Controller is regular. I can't get more info from the traps as the reason code is always;
 
" AP associated to Controller is UP. Reason: Radio interface reset due to Init"
"AP associated to Controller is down. Reason: Radio interface reset"
"AP associated to Controller is UP. Reason: Radio interface reset"
 
####Only 2ice was the reason code "Operator changed 11g mode". I have seen some posts about similar problems but there hasn't been any concrete solution provided.
 
note that RLDP is disabled, Primary discovery timer is 120sec, and the version is 7.098

View 11 Replies View Related

Cisco VPN :: ASA 5520 Resets All Clients Sessions When Create New Ipsec

Oct 26, 2011

We have asa 5520 with 8.4(2) release and asdm 6.4(5). When we create new ipsec connection profiles (by ipsec wizard for example), ASA reset all vpnclients sessions active. Now we need to create new profiles, but we have 170 vpnclients sessions active, so we cant'.

View 3 Replies View Related

Cisco Infrastructure :: 3660 - Interface Resets Over Fast Ethernet

Mar 20, 2005

I am troubleshooting interface resets on a 3660 connected to a 3550 over Fast Ethernet. I have hard coded both sides for full duplex and 100Mbit. The 3660 is incrementing interface resetes about 4-6 times a day and the 3550 is clean. I have noticed this in other similar configurations as well.

View 4 Replies View Related

Linksys Wireless Router :: EA3500 IPV6 Tunnel Resets To Automatic

Jan 27, 2013

I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube.  My provider does not support IPV6.  Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have  firmware version 1.0.30 build 126544 2011-12-24.  Firmware update function says I got the latest version.

View 5 Replies View Related

Linksys Wireless Router :: Wrt160n V3 Resets Constantly While Streaming From Netflix

Feb 27, 2010

I just got a linksys after years of using a single netgear, this is the second we've gotten in the last month... But each time we have the same problem, the thing resets constantly while doing streaming from netflix, over wifi, and resets the entire router. I've updated to the latest firmware but i'm ready to just throw this out and put our old netgear back up.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved