Linksys Wireless Router :: Lost WRT120N Installation Disc?
Aug 1, 2011
I have a WRT120N router up and running in my home. I had the software (Network Magic) that came with the router installed on my old laptop. The hard drive died on the laptop and now I cannot seem to find the CD. When can I find an online download for the software?
View 1 Replies
ADVERTISEMENT
Jun 11, 2007
I recently reformatted my HD and when i went to install my wireless adapter i realized i had lost my Install CD for my WUSB54G Ver. 4 USB wireless adapter. Is there anywhere to download the install program?(i'm running windows xp)
View 4 Replies
View Related
Mar 27, 2011
I plan on replacing my linksys BEFW11S4 wireless router with a new linksys WRT120N wireless router. Should I completely remove and unplug the old router before inserting the startup CD and beginning the installation process for the new router?
View 3 Replies
View Related
Aug 18, 2009
I bought a Linksys-Cisco wireless G Broadband Router model # WRT54G2 some time ago, and I never installed it. Now I cannot find the set up CD-ROM or the user guide CD-ROM. Is there a way to down load these from the product site...
View 9 Replies
View Related
Jul 10, 2012
I lost the disc to my X2000 gateway. Is there a download site for the software?
View 1 Replies
View Related
Jun 11, 2011
i got this wireless router (linksys version WRT54G) from my aunt but she can't find the disc for it. is there a way to use it without buying anything (this is mainly for my wii), if so how?
View 2 Replies
View Related
Jun 22, 2007
I bought the wap54g access point.unfortunately i have lost the installation cd.is there a way to download the drivers of this device?
View 4 Replies
View Related
Feb 28, 2013
Can't get my router to reognize my usb3.0 ssi 1359ru raid kabinett.
View 1 Replies
View Related
Jan 29, 2012
I have returnd my laptop (Fujitsu Siemens Amilo 2727) to factory setting, increased the memory and installed Windows 7. Wireless was working fine until I installed Windows 7. Everything works fine on the Ethernet cable, the usual way of turning on the wireless connection using Fn+F1 is not working.
View 5 Replies
View Related
Sep 18, 2011
i lost my installation cd for my e1000
View 1 Replies
View Related
Aug 24, 2011
Is there any place I can download it so I can use my wi-fi again withot buying the installation CD?
View 2 Replies
View Related
Oct 20, 2012
I lost my set up CD for my N150 Belkin router is there a way to manually download the driver installation?
View 3 Replies
View Related
Oct 10, 2009
The "Setup Wizard" disc that came with my WET610N won't work in a Mac. Is there a disc or a download available?
View 6 Replies
View Related
Apr 22, 2007
How can I get a installation CD for a WRT54GX2 Wireless router? Can you download from internet?
View 3 Replies
View Related
Mar 24, 2012
I currently have an E1000 router set up on a 2006 Dell PC as main hub of a network that includes kids' 2003 Dell PC (with a Cisco Connect USB receiver plugged in because it has no wireless capabilities) and wife's Dell laptop. We're about to change main desktop computer to an iMac (2011 refurb, won't be running Lion which I know there's issues with as far as Cisco Connect), give the 2006 Dell to kids and get rid of the old 2003 box. I cannot locate my installation CD, I'm sure it's somewhere in our rather cluttered computer area, although I understand I can download what I need. This probably is a dufus question, and I apologize in advance, it's just not clicking in my mind, but basically am I going to have to go back to step one, just like the first day I set up the router, as far as setting up our network?
View 3 Replies
View Related
Aug 1, 2012
I just bought EA4500. The CD come with it does not support Mac OS 10.8.
View 9 Replies
View Related
Aug 25, 2011
I just got a new WRT54GL wireless router to replace my WRT54GS failing router and I have a question. It's been awhile since I installed the old router and I remember something about not using the CD as it says before plugging in the new router because it messes everything up. All of my computers are running XP Pro SP3 with 2 of them being wired.
I remember something about just plugging the router in and typing in 192.168.1.1 in my browser and then setting everything up that way. Am I correct in doing this or am I forgetting something?
Oh, I am also running Network Magic so would I also have to reinstall it?
View 2 Replies
View Related
Aug 17, 2011
I am installing the router but keep getting stuck on the 4th step and getting an error code 321. i currently have cable internet, which is working but when i follow the instructions it wont work. I cant access 192.168.1.1. I tried through google chrome and internet explorer but neither will recognize it. I just started school and would like to use wireless internet on my new laptop instead of cable on my desktop.
View 9 Replies
View Related
Feb 12, 2012
Bought a E2500 Linksys Router, i updated with Firmware Version 1.0.03 ( Build 4 )no problem,!! it is connected directly with a RJ45 Cable, router to Computer,no firewall on at all ,wide open yes i am on internet !! but here is the Problem i get everytime !! ---> ( Cisco Connect Setup Software For PC ) what it does is that it installs agreements etc.. password and all but near the end it tells me i am not on the internet you have been disconnected ! ;( and stops everything from continuing installation and i have to uninstall all from registry etc.. then re-install again and get same problem everytime i got a e3000 and it is great.
View 1 Replies
View Related
Apr 25, 2011
Does the E1000 router come with a default security setting upon installation using the supplied CD?
View 9 Replies
View Related
Apr 18, 2012
Linksys WRT120N to 811.11n? I set to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.
View 3 Replies
View Related
Jan 7, 2012
After popping in the installation CD, the screen says hook everything up, which I do. Then click next, where it says "Searching Networks", then quickly changes to "Connecting to Network", and then it says it "Cannot Find Router.". Err. Check setup, etc.If I hook up directly to new router VIA internet cable. Also, this is strange: When I just open up a web browser and try to log into the router 192.168.1.1, using no user name, administration as the password, it won't let me in to the router. Even after I have reset the router with a pen.
View 1 Replies
View Related
Jan 31, 2013
I have desktop and two laptops. I have DSL connected with my desktop only. If I'm gonna install E200 so I can use my laptops in internet, wouldn't it effect my dsl connection in my desktop?
View 1 Replies
View Related
Aug 7, 2012
Got the cisco EA4500 router, installed it and ran the set up disc. It downloads whatever it needs to download, then proceeds with a progress bar all the way to 100. Then it tells me my internet cable is unplugged, but I able to browse the intrnet, like now. It tells me to plug it in and hit next, I hit next and it eventually gives me the same message. I've tried unplugging my modem, resetting the router etc. But when trying to run the disc when it gets to that point it always tells me my internet is unplugged? I can even browse the internet while that message is up.
View 9 Replies
View Related
May 18, 2011
I bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.
View 8 Replies
View Related
Mar 25, 2011
I currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x with a subnet of 255.0.0.0 I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.
View 9 Replies
View Related
Oct 29, 2009
I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
View 9 Replies
View Related
Sep 5, 2010
I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?
View 9 Replies
View Related
Jan 18, 2010
My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies
View Related
Aug 20, 2011
Is there anyway to disable WPS on the WRT120N router?
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?
View 3 Replies
View Related
Mar 17, 2010
I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet. When I go through the steps from the CD to install, the wizard does not find the connection. When the internet is plugged directly into the computer, it works fine. If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install
View 4 Replies
View Related
Jul 2, 2012
I have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.
View 9 Replies
View Related
Apr 2, 2013
why are some of the lines solid & others dotted on the map page?
View 4 Replies
View Related