We have many CT/MRI etc. machines and Servers in the Hospital LAN. Now intermittently we are loosing the LAN connectivity i.e we are not able to ping any system from any node inside the hospital network for sometimes, after some time it will start working and then again it will stops again.We are using procurve switches and also we are not using any router
View 2 RepliesI have strange problem I am using my static ip system since two year, I dont have issues so far, since two days I am facing a strange issue when I am piging my system I could able to see reply,
but when I am trying to connect via MSTSC..blank screen even I am unable to get login screen also...
I have tried to connect to log mein and team viewer all are having the blank screens
Cannot Ping System but system can ping everyone on the network accessible
View 2 Replies View RelatedFrom My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View Relatedi can ping the other system but i can not access tthat system.. error message shows that path does not found.
View 6 Replies View RelatedMy company recently purchased a custom domain name through In Motion Hosting (inmotionhosting.com) which has worked great up until today. As of this morning we are not able to view our webpage online (ronnysinc.com) or any inmotionhosting pages including our email accounts. However, we can view any other website and computers outside of our network seem to be able to view those pages without any problem. [code] As you can see it works fine with any other website such as google. My initial thought was it was being blocked by our firewall but when I log into the router I do not see any firewall settings that would create this block. I also tried resetting the router and flushing the DNS with no success.
View 5 Replies View Relatedi'm trying to hook up mi lorex 4 edge+ dvr to my lcd tv (not. full hdtv) i tried using the hdmi cable and adapter but it gave me a message "system not recognized" i would like to know if there is something else i could try. tv daes not have vga connection.
View 2 Replies View Related128 compact flash got corrupted and suddenly not working after i reboot the 2801 router. now i have a new 256 compact flash and 512 compact flash but i cannot still to boot the 2801 properly. it always do looping like booting in rommon and will be the image decompress but in the end theres an error, Wrong system software for this hardware. ive tried different ios but still the same.
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2004 by cisco Systems, Inc.PLD version 0x10GIO ASIC version 0x127c2801 processor with 262144 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initializedprogram load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0x2fae3d4Self decompressing the image : ##################################################################################################################################################################################[Code]....
I have a multiple Offices in my location , all my external users are connecting my site using Cisco Client to site VPN and accessing my 2 sites , All users are able to access my 2nd office servers which are in 10.10.0.x pool , I have a different vlan in that same location with 10.10.35.x series and users are not able to access this pool servers , I am not much familiar with Routing . i am using ASA 5520 firewall .
View 11 Replies View Related*I have 2 cisco routers 2811 router A&B*using 0/0 for WAN and 0/1 for LAN on both routers*both routers are connected together with crossover cable to 0/0. recieve link and activity*both routers are on the same subnet Router A:0/0 192.168.1.1/24 - router A:0/1 192.168.2.1/24 ; Router B:0/0 *192.16.1.2/24 router B:0/1 192.168.3.1/24*I can ping the inside and outside address of both router from PCs connected at its respectable end. *PC A 192.168.2.2/24 PC B 192.168.3.2/24 *when connected to router A 0/1 and I try to ping router B 0/0 it times out in DOS* but I AM (CAN) able to ping from PC A to router B 0/0 in hyperterminal, telnet and Cisco SDM. I just CANNOT ping in DOS?
View 10 Replies View RelatedI m not able to ping from one to another with the os win XP n other with win 7.
View 1 Replies View RelatedI'm trying to do port forwarding on my DIR-615...first of all I need to be able to ping the router from outside! I did enable the ping options to allow request from WAN...still don't work!!I removed the router and plug my laptop directly on my cable modem adapter and I'm able to ping my IP address (did put the same address the router had)...so, the IP is OK and it is possible to get in the modem from outside.I did plug back the router, and still not working...I did some trick like enable all IP with the Inbound filter...give access to few MAC address that I have to give more chances to get in and still not working!!!
View 6 Replies View RelatedI have created a site to site Ipsec vpn with a cisco 2610 and a linksys RV042. Running a show "crypto isakmp sa" command I get a qm_idle status and when running a "show crypto ipsec sa" I see that packets are being decrypted and encrypted. Also when running the "show ip access-lists" command I do have matches to that connection.The problem is that I am unable to ping hosts from one network to another. For example, from the Cisco router in network 192.168.0.0 I am unable to ping the remote network 192.168.2.0 and vice versa.
I am not sure what is happening. Do I need to create a route to that remote network? I guess it could also be a problem with NAT or an ACL.Here is what running-config shows:
crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
group 2
lifetime 28800
I am connecting a 2600 router to an ISP. Interface 0/0 is connected to the ISP using DHCP. Interface 0/1 is connected to the inside providing DHCP services to the inside. At least it should only be providing DHCP services to the inside. I also have a public static IP that is NAT to a private static IP. Everything is working except the computer on the static IP. From the router I am able to ping inside and out from each interface. I am able to ping both interfaces of the router from the computer on the static IP but I cannot ping outside the router. If I do a debug all I see a reject for the gateway of the static IP but it has “mobile IP” in the text string. Not sure what mobile IP is relating to. Networks are as follows:
0/0 DHCP 10.X.X.X
0/1 192x.x.x
Static 75.X.X.X
[Code].....
This is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.
View 19 Replies View RelatedI have a home network of 3 cmputers. DHCP from router. 1 computer is not getting address. But if I assign it one, with same gateway and dns(not a duplicate ip of others), it can ping internally, and outside. I can do tracert to 8.8.8.8 and ping it (google DNS). But I can't get to internet. So - i can get out, but nothing coming in. I have checked firewall.
View 4 Replies View Relatedi'm configuring the network using static routing from the information above. can i know why i'm unable to ping from pc 1 to pc2 and pc0 to pc2?
View 8 Replies View RelatedI have the following setup where the Cisco ME 3400 provided by the ISP.
My Cisco 2911 is configured as below:
CORE_Router#sh run
Building configuration...
Current configuration : 6075 bytes
[Code].....
I've been called upon to fix the SSL VPN issues in our ASA5505. The issue I am having is that I am able to log into the vpn, access the internet, but I'm unable to access anything on the LAN. I can't use ping or use DNS.
I'm using ASDM v. 6.2(1) and ASA verison 8.2(1). I'm not comfortable using the CLI and prefer the GUI.
I have two windows 2008 machines on vmware. I assign 10.0.0.1/8 and 10.0.0.2/8 to them. Both connected to same virtual switch. Now should these two PCs ping each other? In my case they dont ping. What i get is Repy from <ip address>: Destination host unreachable.
View 2 Replies View Relatedunable to access or ping google.com on WinXP - have two computer side by side. only having the problem on one of them. Have replaced the network card, did have malware but cleaned it up with malwarebytes.
View 1 Replies View RelatedI'm trying to setup my home network so that I can access it when away from home but I've ran into problems and I can't figure out what is causing the problem.I've setup the router to forward incoming requests on port 80 to be directed to my PC running WAMP. The PC has a static IP and if I access it from another PC on my network I get the WAMP page load as expected.I've also setup an account with no-ip.com to resolve my (dynamic) ip. If I use the address they have setup while I'm on my network I get the login page for the router, again this is what I expect.The problem begins when I try and access my home address (whatever.no-ip.biz) from outside my network. I've tried it from 2 different locations and via a dial-up account and I get nothing.
View 6 Replies View RelatedI have two computers side by side 192.168.1.7 and 192.168.1.8 both running xp pro sp3. On 8 I can RDC to the 7, but on 7 I cannot RDC to 8. I can see port 3389 listening on both using netstat -a. But 7 just can't RDC connect to 8. 7 cannot ping 8 either. I have the firewall turned off on 8, I had tried allowing RDC 3389 earlier with the firewall but that didn't work either.I don't have any extra firewalls running.Life will be like perfect, if I can just RDC to 8.Both are on the same wired belkin wireless router, 4' from itl.I tried taking the no ping no rdc computer to work and it didn't work there either.
View 19 Replies View RelatedIt works on the mobile site at times maybe twice a day but only able to access for 10 minutes maximum. I tried the command prompt and ping facebookm and noticed that I didnt recieve files back and it was just timing out is that whats causing it?
View 3 Replies View RelatedI have been accessing my webmail account everyday for the past 3yrs with not problem until this week. Stopped working mid week. No changes to computers. Have 3 and none will access this site any longer. Just times out. Sometimes I can ping and other times not. Can log onto other networks and access with out any problems. My ISP says it is not their problem. (Site is [URL]).
View 1 Replies View RelatedI have just setup the 3G Wifi Router (Huawei 3G21WE) for my company at remote site for temporary use.Now we want to monitor the DVR and cameras installed on the site from head office but i am unable to do it.I have done the port forwarding on the router and using Dyn DNS and configured it correctly, but i cannot browse it from internet.I have also noticed that i am unable to ping the public IP/DynDNS from internet. also i cannot find any option to disable the firewall on my router.
View 3 Replies View RelatedO.S - Windows Vista
Router - Belkin F5D8236-4
When I check with PFPortChecker, it says "We were not able to ping your router" I have done everything correctly, or maybe I thought I have. I have try 69.165.255.1 a default gateway but it just goes to Unidentified Network and I can't access the Internet
Both my DIR-655 and DIR-815, when setup as wireless access points, are unable to ping external IP addresses and thus cannot contact the dlink ntp servers. I've disabled UPnP, disabled DHCP, changed the LAN IP address to an available address on the network. The wireless works, devices are getting an IP from the network DHCP server and can surf the internet. But the DLink router itself cannot ping any external IP addresses. But the DLink router itself cannot ping any external IP addresses.
View 3 Replies View RelatedI just tried to configure my ASA but unable to ping. My setup is as follows:
Cable Modem (DHCP from IPS)---> ASA (192.168.1.1)--->Belking Router (192.168.5.1)--->Switch (192.168.5.14)--->
ASA Version 8.2(3)
!
hostname WoodHomeASA-1
[Code].....
I am currently working on a 1941w router. The problem that I am having is that I am unable to ping the switch that is directly connected to it and I am unable to ping from the switch to the router. If I take the address off of vlan 1 and move it to gi0/0.1 the pings work, but then client traffic on the wireless ap inside the 1941w fails.
Here is the releveant config off of the 1941w
version 15.0
no service pad
service timestamps debug datetime msec localtime show-timezone
[Code].....
im trying to connect a dell MD3000i to a Cisco 3750-s but i am not abel to ping the server.the status is up and Protocol is up. but still nothing.i configerd the port to be a acces port and also at trunk port but still nothing is happening.
View 1 Replies View RelatedI have the following setup.
host PC (192.168.9.3) -----> gateway (192.168.9.2) ----- Pix E1 (192.168.9.1)/Pix E0 (81.x.x.250) ------ Internet
The 192.168.9.2 gateway is a 3560 switch connected to the PIX. I can ping out to the Internet via IP from the PIX, but not via the host PC (192.168.9.3) on the LAN. PIX and gateway configs below. Am I missing something that's preventing me pinging out to the Internet from the internal LAN?
PIX config
test-cal-pix01# sh run
: Saved
:
PIX Version 8.0(3)
!
hostname test-cal-pix01
enable password btf1YD.Vq7mE6vEA encrypted
[code]....
i have a site to site vpn stablished, the vpn works fine (while is up), i have a cisco asa 5520 and the other end of the vpn is a jupiter device that for technical reasons needs to send a continuos ping and when it does not receive a reponse back it brings down the vpn tunnel and reestablish it again. while the vpn is up traffic flows perfectly but because i m unable to repond to the ping the vpn is brought down as reestablished by the jupiter device. the jupiter device pings the encryption domain which is an ip that is natted to the real ip in the inside network. this is my configuration of the vpn:
AAA.AAA.AAA.AAA is the ASA public ip in the outside
BBB.BBB.BBB.BBB is the jupiter device ip (part of the object group IP_LIST)
CCC.CCC.CCC.CCC is the nat ip on the ASA
10.21.0.164 is the real address in the inside(code)