Cisco :: Unable To Ping From Static IP?
Oct 26, 2012
I am connecting a 2600 router to an ISP. Interface 0/0 is connected to the ISP using DHCP. Interface 0/1 is connected to the inside providing DHCP services to the inside. At least it should only be providing DHCP services to the inside. I also have a public static IP that is NAT to a private static IP. Everything is working except the computer on the static IP. From the router I am able to ping inside and out from each interface. I am able to ping both interfaces of the router from the computer on the static IP but I cannot ping outside the router. If I do a debug all I see a reject for the gateway of the static IP but it has “mobile IP” in the text string. Not sure what mobile IP is relating to. Networks are as follows:
0/0 DHCP 10.X.X.X
0/1 192x.x.x
Static 75.X.X.X
[Code].....
View 13 Replies
ADVERTISEMENT
Nov 7, 2012
I have 5 Static Ip pool all IPs are working fine. I have deploy a IIS Server on Windows2008 and configure the Static IP on that server. earlier it was working fine . but since last month the IP is not pinging from Out Side but internal IP Pool its working. I have checked the SERver firewall and another Setting is Ok. if i changed the Ip from the server the new IP is also not pinging.
View 1 Replies
View Related
Jul 5, 2011
I have strange problem I am using my static ip system since two year, I dont have issues so far, since two days I am facing a strange issue when I am piging my system I could able to see reply,
but when I am trying to connect via MSTSC..blank screen even I am unable to get login screen also...
I have tried to connect to log mein and team viewer all are having the blank screens
View 7 Replies
View Related
Jan 18, 2013
From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies
View Related
Jun 27, 2012
I have setup Cisco Asa 8.4 Lab in GNS3 to understand new Nat changes in asa 8.4 because im new to asa.
I have configured one of my internal webserver to static NAT with one public ip. Im able to access hosted webpage from static public ip 192.168.1.4 means NAT is working fine, the problem here Im facing i'm not able to ping to Mapped public IP 192.168.1.4 from outside interface sitting on pc (ip 192.168.1.100) which is also connected to same outside network and neither from ASA console but Im able to ping outside interface ip address which is 192.168.1.3 from pc (192.168.1.100) and from asa console.
This how my network topology
Inside Network 192.168.72.0/24 outside Network 192.168.1.0
inside ip 192.168.72.2/24---------------ASA8.4-----------------------outside ip 192.168.1.3/24 (connected to ADSL router 192.168.1.1)
[Code]......
View 3 Replies
View Related
Jan 21, 2011
My old office uses Cisco 861 as a VPN router, with the WAN side setup to receive a dynamic IP assigned by Time Warner cable. Now we switched to a new office, with TowerStream which provide 4G SLA'ed 10Mbit service with static IP, and I get a Cat 5 ethernet down from it.
So all I did, was to go my "interface FastEthernet4", and typed ip address 173.243.123.123 255.255.255.252.Changed speed to "speed 100" and "full-duplex" (as instructed by the ISP).
I also did "ip default-gateway 173.243.123.124", which is the default gate way assigned by the ISP.I also typed "ip name-server 64.17.123.123" to setup the new DNS, am I doing anything wrong? I can't even use the router to ping google, but if I connect the laptop directly to the outside line, then it works, so I know the outside line is good.
Why can't I connect to the internet? I wasted several hours already trying everything in my book to trouble shoot a supposedly very simple configuration change. Do I need to change something related to NAT when changing to Static IP? My NAT was working just fine before when under DHCP.
The below is my full config (some IPs changed to preserve anonymity):
=============================================
Building configuration...
Current configuration : 16628 bytes
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
[code].....
View 29 Replies
View Related
Oct 25, 2011
I defined a static route: 192.168.0.0 / 255.255.255.0 / 192.168.1.201 (gateway), I can connect from 192.168.1.0 to 192.168.0.0 but we cannot ping in this local network. We have a CISCO 18000 as a VPN IP configured between this two local network.
View 1 Replies
View Related
Feb 28, 2012
I am using D link Wireless router and the Model is DI-524 I am unable to configure the router with static Ip as the ISp having Static Address.
View 4 Replies
View Related
Mar 9, 2013
*I have 2 cisco routers 2811 router A&B*using 0/0 for WAN and 0/1 for LAN on both routers*both routers are connected together with crossover cable to 0/0. recieve link and activity*both routers are on the same subnet Router A:0/0 192.168.1.1/24 - router A:0/1 192.168.2.1/24 ; Router B:0/0 *192.16.1.2/24 router B:0/1 192.168.3.1/24*I can ping the inside and outside address of both router from PCs connected at its respectable end. *PC A 192.168.2.2/24 PC B 192.168.3.2/24 *when connected to router A 0/1 and I try to ping router B 0/0 it times out in DOS* but I AM (CAN) able to ping from PC A to router B 0/0 in hyperterminal, telnet and Cisco SDM. I just CANNOT ping in DOS?
View 10 Replies
View Related
Jul 15, 2011
This problem applies (in my case) to our ASA5510. The issue here is that the http service on the ASA is runnnig off of the standard port 80. Login to the firewall and run the following.no http server enable http server enable 8080,Now you should be able to add a NAT/PAT on port 443 to another server of your liking. Just remember when you attempt to use ASDM to manage the ASA in the future to specify the new port 8080.
View 1 Replies
View Related
Nov 22, 2011
I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on Site A from Site B
Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done?
View 3 Replies
View Related
Mar 25, 2011
I have created a site to site Ipsec vpn with a cisco 2610 and a linksys RV042. Running a show "crypto isakmp sa" command I get a qm_idle status and when running a "show crypto ipsec sa" I see that packets are being decrypted and encrypted. Also when running the "show ip access-lists" command I do have matches to that connection.The problem is that I am unable to ping hosts from one network to another. For example, from the Cisco router in network 192.168.0.0 I am unable to ping the remote network 192.168.2.0 and vice versa.
I am not sure what is happening. Do I need to create a route to that remote network? I guess it could also be a problem with NAT or an ACL.Here is what running-config shows:
crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
group 2
lifetime 28800
View 5 Replies
View Related
Apr 26, 2012
I have the following setup where the Cisco ME 3400 provided by the ISP.
My Cisco 2911 is configured as below:
CORE_Router#sh run
Building configuration...
Current configuration : 6075 bytes
[Code].....
View 6 Replies
View Related
Aug 18, 2011
I've been called upon to fix the SSL VPN issues in our ASA5505. The issue I am having is that I am able to log into the vpn, access the internet, but I'm unable to access anything on the LAN. I can't use ping or use DNS.
I'm using ASDM v. 6.2(1) and ASA verison 8.2(1). I'm not comfortable using the CLI and prefer the GUI.
View 13 Replies
View Related
Mar 7, 2012
Comcast Cable Internet Linksys WRT54G Router (using wired, not wireless)
I've done this a million times over so I thought I knew what I was doing. I set my IP as 192.168.1.236 and get all of the information I need from ipconfig. When I put it all together though, it just doesn't work. I think I'm not getting the correct DNS information from ipconfig and the blockheads at Comcast have no idea what a name server is. I've called and talked to about twenty different people there and no one can give me my name server. *sigh*
At any rate, below is a screenshot of what I'm getting in ipconfig. My assumption is that I'm not getting the correct DNS info, but I don't even know at this point.
View 5 Replies
View Related
Mar 9, 2011
We have many CT/MRI etc. machines and Servers in the Hospital LAN. Now intermittently we are loosing the LAN connectivity i.e we are not able to ping any system from any node inside the hospital network for sometimes, after some time it will start working and then again it will stops again.We are using procurve switches and also we are not using any router
View 2 Replies
View Related
Sep 14, 2012
I m not able to ping from one to another with the os win XP n other with win 7.
View 1 Replies
View Related
Jul 29, 2011
I'm trying to do port forwarding on my DIR-615...first of all I need to be able to ping the router from outside! I did enable the ping options to allow request from WAN...still don't work!!I removed the router and plug my laptop directly on my cable modem adapter and I'm able to ping my IP address (did put the same address the router had)...so, the IP is OK and it is possible to get in the modem from outside.I did plug back the router, and still not working...I did some trick like enable all IP with the Inbound filter...give access to few MAC address that I have to give more chances to get in and still not working!!!
View 6 Replies
View Related
Nov 23, 2012
On 1811W Router i have OSPF running and i do not need this static route.ip route 192.168.20.0 255.255.255.0 192.168.20.3,when i try to delete i get error ,1811w#,config t,Enter configuration commands, one per line. End with CNTL/Z.,1811w(config)#no ip route 192.168.20.0 255.255.255.0 192.168.20.3,%No matching route to delete,1811w(config)#.
View 7 Replies
View Related
Sep 9, 2011
I just tried to configure my ASA but unable to ping. My setup is as follows:
Cable Modem (DHCP from IPS)---> ASA (192.168.1.1)--->Belking Router (192.168.5.1)--->Switch (192.168.5.14)--->
ASA Version 8.2(3)
!
hostname WoodHomeASA-1
[Code].....
View 30 Replies
View Related
Oct 10, 2011
I am currently working on a 1941w router. The problem that I am having is that I am unable to ping the switch that is directly connected to it and I am unable to ping from the switch to the router. If I take the address off of vlan 1 and move it to gi0/0.1 the pings work, but then client traffic on the wireless ap inside the 1941w fails.
Here is the releveant config off of the 1941w
version 15.0
no service pad
service timestamps debug datetime msec localtime show-timezone
[Code].....
View 3 Replies
View Related
Jun 5, 2012
im trying to connect a dell MD3000i to a Cisco 3750-s but i am not abel to ping the server.the status is up and Protocol is up. but still nothing.i configerd the port to be a acces port and also at trunk port but still nothing is happening.
View 1 Replies
View Related
Mar 29, 2012
I have the following setup.
host PC (192.168.9.3) -----> gateway (192.168.9.2) ----- Pix E1 (192.168.9.1)/Pix E0 (81.x.x.250) ------ Internet
The 192.168.9.2 gateway is a 3560 switch connected to the PIX. I can ping out to the Internet via IP from the PIX, but not via the host PC (192.168.9.3) on the LAN. PIX and gateway configs below. Am I missing something that's preventing me pinging out to the Internet from the internal LAN?
PIX config
test-cal-pix01# sh run
: Saved
:
PIX Version 8.0(3)
!
hostname test-cal-pix01
enable password btf1YD.Vq7mE6vEA encrypted
[code]....
View 1 Replies
View Related
Dec 14, 2011
i have a site to site vpn stablished, the vpn works fine (while is up), i have a cisco asa 5520 and the other end of the vpn is a jupiter device that for technical reasons needs to send a continuos ping and when it does not receive a reponse back it brings down the vpn tunnel and reestablish it again. while the vpn is up traffic flows perfectly but because i m unable to repond to the ping the vpn is brought down as reestablished by the jupiter device. the jupiter device pings the encryption domain which is an ip that is natted to the real ip in the inside network. this is my configuration of the vpn:
AAA.AAA.AAA.AAA is the ASA public ip in the outside
BBB.BBB.BBB.BBB is the jupiter device ip (part of the object group IP_LIST)
CCC.CCC.CCC.CCC is the nat ip on the ASA
10.21.0.164 is the real address in the inside(code)
View 1 Replies
View Related
Nov 25, 2011
I have 3 2620xm routers connected via dte/dce serial connections In a lab.One of the routers Is also connected to a 2950 switch.
The 2950 switch connects to an unmanaged tp-link switch that Is connected to a dsl modem/router.I have Internet access via the 2950 to my laptop.
I have ripv2 enabled on all the routers and It's working fine.The dsl modem, switch and connected router are on the same subnet.
When I ping the dsl modem via the 2950 or via the router connected to the 2950 , It works 100%.If I ping the 2950 from either of the other two routers , It also works 100%.I can't ping the dsl modem however from the other two routers.I've only been studying for the ICND1 so maybe there's something I'm missing here.
View 4 Replies
View Related
Apr 2, 2013
I want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies
View Related
Feb 28, 2011
This is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.
View 19 Replies
View Related
Jan 23, 2011
I have a home network of 3 cmputers. DHCP from router. 1 computer is not getting address. But if I assign it one, with same gateway and dns(not a duplicate ip of others), it can ping internally, and outside. I can do tracert to 8.8.8.8 and ping it (google DNS). But I can't get to internet. So - i can get out, but nothing coming in. I have checked firewall.
View 4 Replies
View Related
Jul 27, 2012
i'm configuring the network using static routing from the information above. can i know why i'm unable to ping from pc 1 to pc2 and pc0 to pc2?
View 8 Replies
View Related
Jan 21, 2013
Platform:
cisco6509-E with FWSM
Supervisor Engine 32 PISA 8GE
sup-bootdisk:s32p3-adventerprisek9_wan-mz.122-18.ZY2.bin
command:
(config)#ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029
(config)#no ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029
#clear ip nat tran *
(config)#ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029
%Port 14029 is being used by system
Or %Static entry in use, cannot change
But when I perform "sh ip nat tran" command,There is nothing
View 1 Replies
View Related
Oct 25, 2012
Recently we have configured new site where we are unable to ping global DNS from routers and switches.Checked in the firewall ICMP is allowed.The thing we did is we made Native vlan as vlan 10 (Data vlan ) instead of vlan1. Do this is the issue for not pinging.
View 6 Replies
View Related
Jan 10, 2013
I need another set of eyes on my config. I am trying to set up my router for a basic connection for the time being. I set my gig 0/0 port to dhcp I see traffic being sent and recieved but I can not ping 8.8.8.8. I am connected to a basic comcast modem from 0/0 I have also tried setting gig 0/0 to 100 full. I do have IP routing enabled. I believe I have my acl's configured correctly. I am wondering at this point if I need a static block of IP's from comcast.
hostname vpn-router-2901
username ****** password *****
enable secret *****
[Code].....
View 14 Replies
View Related
Nov 12, 2012
I have 2 routers, one is an Apple AirPort Extreme with a static outside IP address, I also have a Cisco 871 with a static outside IP address. The Airport Extreme connects to a switch on the private network and has an IP address ending in .1. The Cisco 871 connects to the same Private network and it ends in .2. The 871 is setup as a VPN Server. now when clients connect to the VPN they can ping the VLan IP Address on the 871, but they can t ping any other hosts on the smae network. The hosts on the private network can ping the vlan on the 871.
View 7 Replies
View Related
