System Pinging But Unable To Access?
Jul 4, 2012i can ping the other system but i can not access tthat system.. error message shows that path does not found.
View 6 Replies
ADVERTISEMENT
Pinging Node But Unable To Access
Dec 26, 2012I am able to ping the node but when i try to access the systm using backslash i am uable to access it and an error of host inaccessible.
View 1 Replies View RelatedCisco :: IP Is Not Pinging By Other System In The Network
Aug 29, 2012my system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server
View 1 Replies View RelatedCisco Switching/Routing :: VLAN810 / Same VLAN Host Unable To Pinging
Feb 4, 2013i configured the VLAN810, with DHCP services, while i try to ping the host which is connected to gi 1/0/2 from my gi 1/0/1 , i can't ping the same vlan host , while i try to debug ip icmp its showing ,
C3750XB11#sh running-config
Building configuration...
Current configuration : 12053 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
[code]....
Unable To Ping Any System In LAN?
Mar 9, 2011We have many CT/MRI etc. machines and Servers in the Hospital LAN. Now intermittently we are loosing the LAN connectivity i.e we are not able to ping any system from any node inside the hospital network for sometimes, after some time it will start working and then again it will stops again.We are using procurve switches and also we are not using any router
View 2 Replies View RelatedUnable To Resolve Target System Name
Feb 8, 2012My company recently purchased a custom domain name through In Motion Hosting (inmotionhosting.com) which has worked great up until today. As of this morning we are not able to view our webpage online (ronnysinc.com) or any inmotionhosting pages including our email accounts. However, we can view any other website and computers outside of our network seem to be able to view those pages without any problem. [code] As you can see it works fine with any other website such as google. My initial thought was it was being blocked by our firewall but when I log into the router I do not see any firewall settings that would create this block. I also tried resetting the router and flushing the DNS with no success.
View 5 Replies View RelatedAble To Ping Static Ip System But Unable To Connect Using MSTSC
Jul 5, 2011I have strange problem I am using my static ip system since two year, I dont have issues so far, since two days I am facing a strange issue when I am piging my system I could able to see reply,
but when I am trying to connect via MSTSC..blank screen even I am unable to get login screen also...
I have tried to connect to log mein and team viewer all are having the blank screens
Unable To Connect HDMI Cable Getting System Not Recognized
May 17, 2012i'm trying to hook up mi lorex 4 edge+ dvr to my lcd tv (not. full hdtv) i tried using the hdmi cable and adapter but it gave me a message "system not recognized" i would like to know if there is something else i could try. tv daes not have vga connection.
View 2 Replies View RelatedCisco WAN :: 2801 Unable To Boot Image Wrong System Software
Feb 28, 2011128 compact flash got corrupted and suddenly not working after i reboot the 2801 router. now i have a new 256 compact flash and 512 compact flash but i cannot still to boot the 2801 properly. it always do looping like booting in rommon and will be the image decompress but in the end theres an error, Wrong system software for this hardware. ive tried different ios but still the same.
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2004 by cisco Systems, Inc.PLD version 0x10GIO ASIC version 0x127c2801 processor with 262144 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initializedprogram load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0x2fae3d4Self decompressing the image : ##################################################################################################################################################################################[Code]....
Cisco Switching/Routing :: ASA 5520 - Unable To Reach VLan System While Connecting From VPN
May 27, 2013I have a multiple Offices in my location , all my external users are connecting my site using Cisco Client to site VPN and accessing my 2 sites , All users are able to access my 2nd office servers which are in 10.10.0.x pool , I have a different vlan in that same location with 10.10.35.x series and users are not able to access this pool servers , I am not much familiar with Routing . i am using ASA 5520 firewall .
View 11 Replies View RelatedCannot Access Any System On The Network
Mar 18, 2011I have setup a network of 5 windows xp systems. All the systems can access one another except for one system which cannot access any other system although it can see the other systems in the workgroup. It can ping to all the systems.The error message is \computer is not accessible. You might not have permission to access this network resource. Contact the administrators of this server to find out if you have access permissions. Th server service is not started.But i checked that the service is running on all the systems.
View 7 Replies View RelatedHome Network :: Access Any System In LAN?
Dec 23, 2012Actually i have a small network of 4 and 5 computers. i am sharing internet via lan not ICS.there are some computer showing me in my network places coz i am using windows 7 and the other computers have same window. i can ping their computers by name and by ip add, which is assigned by DHCP. i can see thir MAC address. can i access their computer i mean their data or something else. i don't know that this is the right place to share such information or not.
View 14 Replies View RelatedAccess Windows 7 System As Client?
May 11, 2011i have server 2008 machine..how can i access windows 7 as client system?
View 1 Replies View RelatedNo Internet Access After Using System Restore?
Sep 20, 2011A I went over to a friend's house to fix some problems with his computer. He has a Windows XP Home Edition desktop. I used System Restore to fix some kinks with it, and now the computer has no Internet access, and I have no idea how to get it back. I tried reversing the System Restore and turning it off, but that's not working. They said that the connection was fine, but that the computer could not read the modem.
View 1 Replies View RelatedAccess Two Or More System With 1 Public Ip Remotely?
Apr 20, 2012Is there any way we can assign or access multiple system with 1 public ip to save public ip's.
View 5 Replies View RelatedAccess Cd Rom Of Another System In Wireless Networking?
Feb 28, 2012How can i access a cd rom from another machine in a wireless network while both machine using ubuntu linux
View 1 Replies View RelatedRouters / Switches :: Can't Access Remote System
Aug 19, 2011I am trying to connect to my office PCs via VPN and/or RDP. The office uses Qwest DSL and has a dynamic IP address. I use DynDNS.org to keep the DNS updated with the WAN address of the router. However, any attempt to access the network fails. I have tried remote management access (I enabled it on the router) but that fails. I forwarded RDP ports on the router to one of the PCs but can't connect to it. I also set up a VPN server but cannot connect to it either. Something tells me that all requests to myoffice.homeip.net are not getting to my modem/router. I have even tried the IP associated with the name (Yes, I did check that it is correct!) but nothing works there either.
View 1 Replies View RelatedSetup Wifi Access System In A College
Dec 13, 2011My task is to plan out on how to setup a WiFi Access System in our college.There are more than 3000 users which include students, faculty, etc.Area is spread across almost 1 acre of land area.
Q1. How do I go about setting up a system where MAC based WiFi Access system is achieved?
Q2. What equipment will be needed, like routers, access points, etc.?
Q3. How many Access Points will be required, and which will be the best in terms of cost, range, speed and performance.
Q4. Which would be the best equipment for this?
Q5. User management solution?
Can't Access XP System Folder Files From Windows 7
Dec 20, 2012I'm having trouble accessing system files from my XP machine through my Windows 7 network. This is the error that I get: "Network Error Windows cannot access \xpusercwindows
You do not have permission to access \xpusercwindows. Contact your network administrator to request access."
I'm admin on both systems(home). Even after searching online, I still haven't come across a solution to my problem.
Software Port 9081 Of System Is Being Used To Access URL?
Jan 14, 2013I want to know which is the port used by my system on accessing a particular URL.Suppose the URL is ip_address:9081/abc.Is the software port 9081 of my system is being used to access the URL? How can I identify it? Is there any command to identify the used port for a particular URL?
View 1 Replies View RelatedServers :: Access Network System Without Admin Password?
Feb 27, 2011how do i browse network systems drive without having local admin password
View 1 Replies View RelatedLinksys Access Point :: Add Repeater To E2000 System?
Mar 31, 2011I need to extend the wireless range over what I have using an E2000. Can I use a WAP610N in repeater mode? If not can I use a WAP54G knowing that there will be a performance loss? Is there another option to add additional coverage to the existing wireless network?
View 2 Replies View RelatedD-Link DIR-655 :: Access Denied To Wireless System With MAC Address 0020008E971E
Jan 7, 2013In my log I have the message: "Access denied to wireless system with MAC address 0020008E971E". When I checked the vendor for this MAC, it shows Lexmark international inc, which fact make me feel something is wrong. My first thought was that somebody trying to break into my net but I am close to accept that the owner of Lexmark WiFi printer without an idea in networking, just tried to connect it to his network and after failing to do that, it's wired and wireless features are still on. But still could this be bug or something? I am posting some logs when I first discovered the problem and after I granted access to the device with the MAC address 0020008E971E. I forgot to tell you, that before I decided to post here I did firmware upgrade from Hardware version A3 1.10 to 1.35NA (I bought it from US) with factory default restore. The result was absolutely the same - the messages kept coming "Access denied to wireless system with MAC address 0020008E971E". So I granted access to that MAC and checked the logs again. There is a line in the log that stated "primary:"
View 7 Replies View RelatedCisco WAN :: 2921 - Block Mac Based System To Access Internet?
Aug 22, 2012I have a netwokr in which users are getting ip address from DHCP server that is window server.i want to block some users to access interent by using their device mac address.i have these devices in my network...
2921 cisco cme router
cisco 2960 switches
cisco 892 cisco internet router
internet ADSL that cnnected with cisco 892...
wireless AP 1142...
i have no firewall or any asa...how can i block some users for accessing internet but they can access internal network...for file sharing and prinitng,...
My Pc Not Pinging Certain Switches
Jun 27, 2011I found that Alternate LAN card will support.After replacing another LAN card i can ping all switches.But i want to know why my pc not pinging certain switches connected in network.Even i cleared the port security
View 5 Replies View RelatedCisco Firewall :: ASA 5505 - Create Access Rule To Connect To System Using RDP?
Mar 6, 2012Just started using our ASA 5505 v8.2 (1) Trying to configure the ASA appliance to allow access into an internal resource (i.e want to be able to RDP into a system behind the ASA from the internet).I have used a static NAT:
static (inside,outside) 100.100.100.2 192.168.1.28 netmask 255.255.255.255
access-list OUTSIDE extended permit tcp any host 100.100.100.2 eq 3389
When I view the logs it is reporting the following:Inbound TCP connection denied from 206.100.100.1 (external IP) to 100.100.100.2 /3389 flags SYN on interface outside.Been pulling my hair out with this one as I believe I have everything configured correctly.
Connected But Computer Does Not See Other Through Pinging?
Aug 19, 2011One computer does not see the other through pinging...but somehow we are connected...strange i know. My confusion ( being network illerate ) is with the names and etc. and some terminologies ie ..client? host? I have found in the past when someone triesthey use words or areas that do not coincide with my system...which is laptop with win 7 prem and desktop XP sp3
View 2 Replies View RelatedPinging Between NIC Cards On Same Machine?
Feb 23, 2011I have 2 NIC cards on the same machine running Redhat 9.I need to setup the machine in such a way that both cards are in the same subnet but card on port eth1 can be reached through card on port eth0.I tried modifying the iptables (with the limited knowledge that I have on it,used google) and even tried turning it off.I also tried setting files /proc/sys/net/ipv4/ip_forward and /proc/sys/net/ipv4/conf/all/proxy_arp to 1 but was unable to ping from IP address on port 0 to IP address on port 1 and vice-versa
View 1 Replies View RelatedCisco VPN :: Can't Bring The VPN Up By Pinging From ASA 7.2
Jan 5, 2012I've attached my ASA's config. I can't bring the VPN up by pinging from the ASA but the VPN will come up when someone pings from behind the ISA server. So the problem seems to be routing/NAT on my ASA because my pings aren't being directed out the tunnel. The VPN in question has 64.106.x.x as the peer and AES 256/SHA for phase 1 and 2.
View 2 Replies View RelatedVPN Connection Dies When Not Constantly Pinging
Jul 2, 2011I will be moving away from my home computer but will still want access to it so I am trying to set up a VPN between it (home computer is windows 7) and my fedora 15 machine. They are currently on the same 192.168.1.0/24 network so I'm wondering if that may be the cause for my troubles.
Here's my setup:
Fedora 15 (192.168.1.3) is running the PPTP server with pptpd and gives 192.168.1.66 to any vpn client that connects to it./etc/pptpd.conf only has "localip 192.168.1.3" and "remoteip 192.168.1.66" options in it /etc/ppp/options.pptpd has "refuse-pap, refuse-chap, refuse-mschap, require-mschap-v2, require-mppe-128, proxyarp, lock, nobsdcomp, novj, novjccomp, nologfd, debug, dump" options Windows 7 (192.168.1.6, 192.168.1.66) is the client and I have it set to use connect to the public IP address of my router, PPTP, require encryption, only allow mschap-v2, don't use gateway in ipv4 properties.Both machines are connected to the same Belkin router (192.168.1.254) and I can ping locally to and from each computer no problem. The problem is my VPN connection is very inconsistent. I will open a ftp connection to 192.168.1.66 from 192.168.1.3, login, start uploading a file, get about 10MB uploaded, and then the VPN connection will die and the upload will fail. But, when I have "ping 192.168.1.66" running while uploading, the connection stays alive.
Pinging Router Fails 5% Of The Time?
Sep 20, 2011Lately I've noticed that my internet connection has been less than stellar. I will be playing an online game or surfing the web, and every so often I'll freeze up or things just won't run smoothly. My network consists of the following...All of my computers and devices connect to a Cisco 16 port gigabit switchThe switch then connects to a Peplink 20 Dual WAN routerThe router connects to a cable modem as well as a DSL modemThe other day I was trying to diagnose the problem, as well as update the firmware of the router. While I was on the main "status" page, I noticed an error saying that I couldn't connect to the router. It quickly cleared and everything was working fine. This of course made me think that my issues have to do with my connection to the router, and not with the internet service itself. I then tried ping -t to two other computers on the network, as well as the router. After 5 minutes of pinging, the connections to the two computers had zero fails, while the router connection failed about 5% of the time. I ran the same check from the other computers on the network, with similar results.So, I know that the issue lies with the router (I think), but that's where my brainstorm ends.
View 4 Replies View RelatedPinging Non-existent Devices On Subnet?
Mar 7, 2013I'm currently taking a networking course and was having some difficulty answering the following questions and could use a little clarification.Question: When pinging a non-existent device on your subnet, why doesn't the source node issue a ICMP echo request.My thoughts on this was because there was not a receiving node therefore any ICMP packets were not issued.Question 2: when pinging another non-existent device but not on your subnet, why doesn't the source node issue a ICMP echo request.
View 2 Replies View RelatedCisco WAN :: 3945 Channelized E1 Not Pinging Self
Mar 3, 2013We have recentrly replaced a 1700 router with Cisco 3945 router (Core Router) and the Channalised E1 interface is configured as given below: [code]
The issue happens intermittenly and makes network not reahable.Status of the links are UP/UP - No traffic forwarded through the link (Ser 0/0/0:1 and Ser 0/0/0:2) and at the same time not able to ping the local IP Address as well - 10.5.10.1/10.7.10.1.No issue on the Ser 0/0/0:0 link - Working fine.If you replace the new router with the old one all are working fine.