A I went over to a friend's house to fix some problems with his computer. He has a Windows XP Home Edition desktop. I used System Restore to fix some kinks with it, and now the computer has no Internet access, and I have no idea how to get it back. I tried reversing the System Restore and turning it off, but that's not working. They said that the connection was fine, but that the computer could not read the modem.
View 1 RepliesThe problematic PC is AMD triple core, with ASUS M3N78 motherboard and xp professional. PC should connect to internet through the router, TP-Link TL WR340GD, along with 3 other PCs which are all working fine. Basically, the PC caught a virus and I performed system restore. After that, the PC was working fine, except that there was no internet connection. I tried to reset winsock from command promp, but that did not sort the connection problem.I noticed that the yellow light on the back of the tower, for the ethernet cable connection, is yellow when the cable is not plugged in, however, as soon as I plug the ethernet cable in, the light disappears. The same cable is working fine when connected to other PCs so it does not seem to be the cable problem. The information in Network Connections says Limited or no connectivity. Full messages when prompted says: "You might not be able to access the internet or some network resources. The problem occurred because the network did not assign a network address to the computer.To restart the connection and try to establish full connectivity, cliick Repair." and then, after clicking repair, it says:"Windows could not finish repairing the problem because the following action cannot be completed:Renewing your IP address.For assistance contact the person who manages your network."I also tried to release and renew IP address from command promp, but that did not work either.
View 19 Replies View RelatedI use a dongle from my ISP as my main internet connection source. I needed to do a full system restore because one of the windows system files got corrupted.After the restore, my internet connection was extremely slow. I restarted the computer and I got my normal fast speed but only for about 10 minutes and it is now very slow again (about 10 mins to load Google home page, for example).Internet speed was never an issue before the restore. Also I tried the dongle on my work laptop at home and it's fine.I'm using Windows XP. I've tried everything suggested at Slow Computer/Internet AFTER complete system restore but it is still slow.
View 5 Replies View RelatedI went to a thread with the same name as this one and tried all of the things in it but it still won't work, although some programs now work a bunch of other ones still can't connect since the restore.
Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Mariama-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
I did a system restore on my xp desktop. Now I can't connect to the internet. My connection says connected but when I go to mozilla it says can't connect to server. All other computers work fine just my fausto which is connected via ethernet.
View 19 Replies View RelatedI have Windows Vista. So I had a virus that was making it impossible for me to open a web browser without it starting a fake security scan and spamming my screen with multiple browsers. I had no other choice but to do a system restore since I had this problem in the past and a system restore fixed my computer. But, after the system restore, I can connect to the network using a wireless, but when I try to open any browser(firefox/internet explorer) it says internet explorer cannot display the webpage or server not found on firefox. I've tried resetting my internet settings, but no luck. I also don't have an internet security anymore since I was trying to install Kaspersky, but kept having trouble installing it properly.
View 1 Replies View RelatedI have an HP 735n Desk PC running Win XP Home with SP 2. It reached a point of only starting under "Safe Start" so out of final desperation, I used (F10) System Recovery. The computer is starting AOK now and I have recaptured a lot of data by uninstall/install of programs where I'm told "Your Data Has Not Been Affected". However, when I reached the point of needing to reconnect to the internet VIA a wireless home LAN utilizing a D-Link DIR-615 (ver 3.21) Router with (1) computer connected thru a USB Adapter WUA-2340 (all working fine) I reinstalled a USB Adapter DWA-125 (ver A1) {Which had been working OK} and I get message "No Internet Connection Available" altho' all other indicators are "GO" The Device is working properly and net work indicators are all showing the D-Link USB Adapters on both my Compaq (with Win 7) and the HP (with XP) are working. I have worked on computers for years and never needed to do a System Recovery before and I have NEVER had any trouble getting on a network nor the internet before. REMEMBER, the HP W/XP CANNOT BE USED TO DOWN LOAD. It won't go on line! I can use my Compaq if we can make CD's, DVD's, or Flash Drive copies of anything needed for transport to the HP.
View 14 Replies View RelatedI was having a problem with my computer so I did a system restore to fix it.It failed the first time. I also disabled my anti virus first. I tried in safe mode and it worked. So obviously something stopped it from working though I'm not sure. Anyway when I logged back into my account my wireless connection said I had no Internet access and the troubleshooter said the dns server isn't responding. I don't know how to fix it. I've tried updating the driver, uninstalling/reinstalling the adapter, enabling/disabling it, connecting/disconnecting from the connection, trying the connection in another account as well as safe mode and nothing has worked.
View 3 Replies View RelatedAfter unable to connect to my wireless network, I did a restore - but got a message: System restore failed to replace the file (C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking98c An unspecified error occurred during System Restore (0x80070002)I've tried 3 restores to get the same message.Am at a loss to get the computer back on line.Running win7 (32Bit) with Norton 360.
View 9 Replies View RelatedI have a netwokr in which users are getting ip address from DHCP server that is window server.i want to block some users to access interent by using their device mac address.i have these devices in my network...
2921 cisco cme router
cisco 2960 switches
cisco 892 cisco internet router
internet ADSL that cnnected with cisco 892...
wireless AP 1142...
i have no firewall or any asa...how can i block some users for accessing internet but they can access internal network...for file sharing and prinitng,...
Lost my internet connection to my Dell XPS 435t/9000 running Win7 (64) yesterday. Unable to restore. No know configuration changes other than the regular weekly window update. My service provider is Verizon FIOS and all there stuff checks out. My iMAC and Dell Laptop connect fine through the same devices (router/modem/switch).
The xps shows no hardware faults and all the wired connections are intact. Unable to ping router. Network Sharing interface shows good connections to switch and router by a bad connection between router and internet.
Ran WIN7 network troubleshooter and it just told me to contact ISP.Rebooted machine several times but no joy.
I have setup a network of 5 windows xp systems. All the systems can access one another except for one system which cannot access any other system although it can see the other systems in the workgroup. It can ping to all the systems.The error message is \computer is not accessible. You might not have permission to access this network resource. Contact the administrators of this server to find out if you have access permissions. Th server service is not started.But i checked that the service is running on all the systems.
View 7 Replies View RelatedActually i have a small network of 4 and 5 computers. i am sharing internet via lan not ICS.there are some computer showing me in my network places coz i am using windows 7 and the other computers have same window. i can ping their computers by name and by ip add, which is assigned by DHCP. i can see thir MAC address. can i access their computer i mean their data or something else. i don't know that this is the right place to share such information or not.
View 14 Replies View Relatedi have server 2008 machine..how can i access windows 7 as client system?
View 1 Replies View Relatedi can ping the other system but i can not access tthat system.. error message shows that path does not found.
View 6 Replies View RelatedIs there any way we can assign or access multiple system with 1 public ip to save public ip's.
View 5 Replies View RelatedHow can i access a cd rom from another machine in a wireless network while both machine using ubuntu linux
View 1 Replies View RelatedI am trying to connect to my office PCs via VPN and/or RDP. The office uses Qwest DSL and has a dynamic IP address. I use DynDNS.org to keep the DNS updated with the WAN address of the router. However, any attempt to access the network fails. I have tried remote management access (I enabled it on the router) but that fails. I forwarded RDP ports on the router to one of the PCs but can't connect to it. I also set up a VPN server but cannot connect to it either. Something tells me that all requests to myoffice.homeip.net are not getting to my modem/router. I have even tried the IP associated with the name (Yes, I did check that it is correct!) but nothing works there either.
View 1 Replies View RelatedMy task is to plan out on how to setup a WiFi Access System in our college.There are more than 3000 users which include students, faculty, etc.Area is spread across almost 1 acre of land area.
Q1. How do I go about setting up a system where MAC based WiFi Access system is achieved?
Q2. What equipment will be needed, like routers, access points, etc.?
Q3. How many Access Points will be required, and which will be the best in terms of cost, range, speed and performance.
Q4. Which would be the best equipment for this?
Q5. User management solution?
I'm having trouble accessing system files from my XP machine through my Windows 7 network. This is the error that I get: "Network Error Windows cannot access \xpusercwindows
You do not have permission to access \xpusercwindows. Contact your network administrator to request access."
I'm admin on both systems(home). Even after searching online, I still haven't come across a solution to my problem.
I want to know which is the port used by my system on accessing a particular URL.Suppose the URL is ip_address:9081/abc.Is the software port 9081 of my system is being used to access the URL? How can I identify it? Is there any command to identify the used port for a particular URL?
View 1 Replies View Relatedhow do i browse network systems drive without having local admin password
View 1 Replies View RelatedI need to extend the wireless range over what I have using an E2000. Can I use a WAP610N in repeater mode? If not can I use a WAP54G knowing that there will be a performance loss? Is there another option to add additional coverage to the existing wireless network?
View 2 Replies View RelatedI want to access my system from internet. My network scenario is as follows;
Internet ==> DSL Modem(s) ==> Load Balance ==> Gateway Firewall ==> My PC DSL 1 : ZXDSL 831CII (Fixed IP)DSL 2 : HG510a Load Balance : TL-R480T+Gateway Firewall : pfSense (BSD)
In my log I have the message: "Access denied to wireless system with MAC address 0020008E971E". When I checked the vendor for this MAC, it shows Lexmark international inc, which fact make me feel something is wrong. My first thought was that somebody trying to break into my net but I am close to accept that the owner of Lexmark WiFi printer without an idea in networking, just tried to connect it to his network and after failing to do that, it's wired and wireless features are still on. But still could this be bug or something? I am posting some logs when I first discovered the problem and after I granted access to the device with the MAC address 0020008E971E. I forgot to tell you, that before I decided to post here I did firmware upgrade from Hardware version A3 1.10 to 1.35NA (I bought it from US) with factory default restore. The result was absolutely the same - the messages kept coming "Access denied to wireless system with MAC address 0020008E971E". So I granted access to that MAC and checked the logs again. There is a line in the log that stated "primary:"
View 7 Replies View Relatedi have 2 system in same network connected in same switch sys-1 have internet access & sys-2 no internet blocked from fire wall,....Now i want to use internet on sys-2 through sys-1 without Proxy or lancard sharing...
View 3 Replies View Relatedmy system an emachine e350 wouldnt share wireless connection to other computers but can receive perfectly well.when i try to set up an adhoc network,it does not show me turn on internet connection sharing,so when other computers try to connect,it just shows they re connected only on my system but not on the other ones and they cant access the internet also.the network discovery too wont stay on, every time i turn it on and save changes it goes back to off.
View 5 Replies View RelatedI am using Win XP and am hardwired to a router (NETGEAR N600 WIRELESS DUAL BAND ROUTER WNDR3400). This was connected hardwire to a cable modem and I had no problems. I recently downgraded to a DSL system and now have problems connecting to the internet. I was asked to disconnect my router and the problem seems to go away. After reconnecting my router it may be fine for a day or two and then the problems start again. Internet drops off while using it or I get a message saying "web page not available because DNS lookup failed. If I bypass my router at this time I can connect. Both my laptop (wireless) and my desktop (Ethernet) are having this problem.Norton Connect Safe is also in use which assigns its own DNS addresses.
View 12 Replies View RelatedIn office we have a broadband internet to 6 systems one router .I want to control the partcular system internet
View 1 Replies View RelatedJust started using our ASA 5505 v8.2 (1) Trying to configure the ASA appliance to allow access into an internal resource (i.e want to be able to RDP into a system behind the ASA from the internet).I have used a static NAT:
static (inside,outside) 100.100.100.2 192.168.1.28 netmask 255.255.255.255
access-list OUTSIDE extended permit tcp any host 100.100.100.2 eq 3389
When I view the logs it is reporting the following:Inbound TCP connection denied from 206.100.100.1 (external IP) to 100.100.100.2 /3389 flags SYN on interface outside.Been pulling my hair out with this one as I believe I have everything configured correctly.
Is it possible to run both LAN connection and dial-up modem for internet on the same system?
View 11 Replies View RelatedI have a DVR system. Which is configure in DMZ on my firewall. DVR internal IP is 192.168.2.13 and external IP is 27.34.xxx.xx. when I am able to access DVR by using internal IP and it works fine while accessing from the internet it not work proper. Though it prompt for username and password also. After enter the login credential its getting blank. I am able to telnet External IP from internet on port 80.
View 1 Replies View RelatedI recently system restored my computer, and it was connected fine to my d-link DIR-615 router, but now it does not connect, what do i do?
View 14 Replies View Related