I use a dongle from my ISP as my main internet connection source. I needed to do a full system restore because one of the windows system files got corrupted.After the restore, my internet connection was extremely slow. I restarted the computer and I got my normal fast speed but only for about 10 minutes and it is now very slow again (about 10 mins to load Google home page, for example).Internet speed was never an issue before the restore. Also I tried the dongle on my work laptop at home and it's fine.I'm using Windows XP. I've tried everything suggested at Slow Computer/Internet AFTER complete system restore but it is still slow.
The problematic PC is AMD triple core, with ASUS M3N78 motherboard and xp professional. PC should connect to internet through the router, TP-Link TL WR340GD, along with 3 other PCs which are all working fine. Basically, the PC caught a virus and I performed system restore. After that, the PC was working fine, except that there was no internet connection. I tried to reset winsock from command promp, but that did not sort the connection problem.I noticed that the yellow light on the back of the tower, for the ethernet cable connection, is yellow when the cable is not plugged in, however, as soon as I plug the ethernet cable in, the light disappears. The same cable is working fine when connected to other PCs so it does not seem to be the cable problem. The information in Network Connections says Limited or no connectivity. Full messages when prompted says: "You might not be able to access the internet or some network resources. The problem occurred because the network did not assign a network address to the computer.To restart the connection and try to establish full connectivity, cliick Repair." and then, after clicking repair, it says:"Windows could not finish repairing the problem because the following action cannot be completed:Renewing your IP address.For assistance contact the person who manages your network."I also tried to release and renew IP address from command promp, but that did not work either.
A I went over to a friend's house to fix some problems with his computer. He has a Windows XP Home Edition desktop. I used System Restore to fix some kinks with it, and now the computer has no Internet access, and I have no idea how to get it back. I tried reversing the System Restore and turning it off, but that's not working. They said that the connection was fine, but that the computer could not read the modem.
I went to a thread with the same name as this one and tried all of the things in it but it still won't work, although some programs now work a bunch of other ones still can't connect since the restore.
Code: Windows IP Configuration Host Name . . . . . . . . . . . . : Mariama-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No
I did a system restore on my xp desktop. Now I can't connect to the internet. My connection says connected but when I go to mozilla it says can't connect to server. All other computers work fine just my fausto which is connected via ethernet.
I have Windows Vista. So I had a virus that was making it impossible for me to open a web browser without it starting a fake security scan and spamming my screen with multiple browsers. I had no other choice but to do a system restore since I had this problem in the past and a system restore fixed my computer. But, after the system restore, I can connect to the network using a wireless, but when I try to open any browser(firefox/internet explorer) it says internet explorer cannot display the webpage or server not found on firefox. I've tried resetting my internet settings, but no luck. I also don't have an internet security anymore since I was trying to install Kaspersky, but kept having trouble installing it properly.
I have an HP 735n Desk PC running Win XP Home with SP 2. It reached a point of only starting under "Safe Start" so out of final desperation, I used (F10) System Recovery. The computer is starting AOK now and I have recaptured a lot of data by uninstall/install of programs where I'm told "Your Data Has Not Been Affected". However, when I reached the point of needing to reconnect to the internet VIA a wireless home LAN utilizing a D-Link DIR-615 (ver 3.21) Router with (1) computer connected thru a USB Adapter WUA-2340 (all working fine) I reinstalled a USB Adapter DWA-125 (ver A1) {Which had been working OK} and I get message "No Internet Connection Available" altho' all other indicators are "GO" The Device is working properly and net work indicators are all showing the D-Link USB Adapters on both my Compaq (with Win 7) and the HP (with XP) are working. I have worked on computers for years and never needed to do a System Recovery before and I have NEVER had any trouble getting on a network nor the internet before. REMEMBER, the HP W/XP CANNOT BE USED TO DOWN LOAD. It won't go on line! I can use my Compaq if we can make CD's, DVD's, or Flash Drive copies of anything needed for transport to the HP.
I was having a problem with my computer so I did a system restore to fix it.It failed the first time. I also disabled my anti virus first. I tried in safe mode and it worked. So obviously something stopped it from working though I'm not sure. Anyway when I logged back into my account my wireless connection said I had no Internet access and the troubleshooter said the dns server isn't responding. I don't know how to fix it. I've tried updating the driver, uninstalling/reinstalling the adapter, enabling/disabling it, connecting/disconnecting from the connection, trying the connection in another account as well as safe mode and nothing has worked.
After unable to connect to my wireless network, I did a restore - but got a message: System restore failed to replace the file (C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking98c An unspecified error occurred during System Restore (0x80070002)I've tried 3 restores to get the same message.Am at a loss to get the computer back on line.Running win7 (32Bit) with Norton 360.
Iam running Windows XP sp3 ,firefox browser and my router and modem are fine. iam getting transferring /waiting for 5 minutes before it loads. each transaction on the page takes minutes. Ive disabled/repaired/enabled internet connection" several times with no success. Where can I look in my system?
I have the revision b version of the dir-655. I'm having a couple issues which im not sure if are related to the dir-655 or something else.
I used to be able to do this, then all of the sudden (I may have changed something) I cannot anymore. The issue is: If I try and access my linux server using http://[My Public IP Address]/ from *inside* my LAN, It will time out and not connect. If I try and access my same public ip address from *outside* my LAN, it works fine.
My router was noticeably slow to respond when navigating the menu system. Then, I changed the ip address to 192.168.0.2 (previously it was 192.168.0.1) and all of the sudden its fast again. I tried rebooting and power cycling before I changed the IP and it was always slow using 192.168.0.1.
Lost my internet connection to my Dell XPS 435t/9000 running Win7 (64) yesterday. Unable to restore. No know configuration changes other than the regular weekly window update. My service provider is Verizon FIOS and all there stuff checks out. My iMAC and Dell Laptop connect fine through the same devices (router/modem/switch).
The xps shows no hardware faults and all the wired connections are intact. Unable to ping router. Network Sharing interface shows good connections to switch and router by a bad connection between router and internet.
Ran WIN7 network troubleshooter and it just told me to contact ISP.Rebooted machine several times but no joy.
I want to access my system from internet. My network scenario is as follows; Internet ==> DSL Modem(s) ==> Load Balance ==> Gateway Firewall ==> My PC DSL 1 : ZXDSL 831CII (Fixed IP)DSL 2 : HG510a Load Balance : TL-R480T+Gateway Firewall : pfSense (BSD)
i have 2 system in same network connected in same switch sys-1 have internet access & sys-2 no internet blocked from fire wall,....Now i want to use internet on sys-2 through sys-1 without Proxy or lancard sharing...
my system an emachine e350 wouldnt share wireless connection to other computers but can receive perfectly well.when i try to set up an adhoc network,it does not show me turn on internet connection sharing,so when other computers try to connect,it just shows they re connected only on my system but not on the other ones and they cant access the internet also.the network discovery too wont stay on, every time i turn it on and save changes it goes back to off.
I am using Win XP and am hardwired to a router (NETGEAR N600 WIRELESS DUAL BAND ROUTER WNDR3400). This was connected hardwire to a cable modem and I had no problems. I recently downgraded to a DSL system and now have problems connecting to the internet. I was asked to disconnect my router and the problem seems to go away. After reconnecting my router it may be fine for a day or two and then the problems start again. Internet drops off while using it or I get a message saying "web page not available because DNS lookup failed. If I bypass my router at this time I can connect. Both my laptop (wireless) and my desktop (Ethernet) are having this problem.Norton Connect Safe is also in use which assigns its own DNS addresses.
I have a DVR system. Which is configure in DMZ on my firewall. DVR internal IP is 192.168.2.13 and external IP is 27.34.xxx.xx. when I am able to access DVR by using internal IP and it works fine while accessing from the internet it not work proper. Though it prompt for username and password also. After enter the login credential its getting blank. I am able to telnet External IP from internet on port 80.
I have PC System Windows XP home edition Version 2002 SP3 and I lost Internet access in the middle of downloading a new program. I have a Motorola modem and modem is connected to the Netgear router. When I turn my desktop PC on which is connected to the router it shows the local connection is connected, but the Bridge Network cable is unplugged I have no idea what that is and if I need it to be connected to the internet. I called the Comcast service and the lady assistant did not even know what the Bridge cable is and I do not know ether since. I do not know what I should do to get the connection back to the PC; another PC work just fine also is connected to the router.
3. wireless PC (not important here.)so PC1 and PC2 are connected directly to internet via this [URL] modem router. I have full control over everything and I did setup the whole thing.We have a limited bandwidth internet plan, but a lot of bandwidth is easily used up by PC2.I want to limit the speed of internet access on that PC2 so that downloading becomes impossible or difficult.
the little computer icon in the system tray has a red "x" on it and says "not connected" BUT i can connect to the internet connect to websites just fine..why does it say not connected?
I have a netwokr in which users are getting ip address from DHCP server that is window server.i want to block some users to access interent by using their device mac address.i have these devices in my network...
2921 cisco cme router cisco 2960 switches cisco 892 cisco internet router internet ADSL that cnnected with cisco 892... wireless AP 1142...
i have no firewall or any asa...how can i block some users for accessing internet but they can access internal network...for file sharing and prinitng,...
I just got my dell dimension 2400 up n running again.
1) I need a new operating system . i know how to do that what with windows being designed to make computers work properly or what is the latest thats not vista or could i just get a copy from a friend? <--- that may not be particularly legal but idc i just want to know if it would work if a new disk is too expensive
2) I need internet connectability i have a working att wireless router brand new just got delivered today and i have a d link wireless reciever thing i just got from my buddy but how to get the internet up n running without boring holes in the floor / wall or dragging a cable 18 miles from the router to the computer so i need it to be wireless
3) I am not sure what to do with it do i just need soft ware updates or do i need hardware updates to get it up to speed with the so called "big boys even though its far larger than any laptop my goal is to have a fast running internet capable game capable and multitasking computer with which i can do.
I am about to re-install Windows ME on an old Dell Dimension 4300. The computer is connected to the internet via a 2Wire 3600HGV DSL modem/router.
Do I need a software firewall? Or is the router sufficient? Is antivirus software necessary if I don't download anything? It will be part of a local LAN, so I don't want to jeopardize any of the other PCs on the home network.
NOTE: I'm looking to run some older (non-DOS) computer games that don't run well (or at all) on XP and newer systems.
NOTE 2: When I say 'secure', I'm not looking to actively browse the web on the machine. I was curious as to what risks I be facing if I simply had this PC connected to my local network (and thus the internet).
I think I've done a wrong move and cancel my company e-mail address.I'm not familiar with this , but is it pssible to restore.??..and if so be as clear as possible for each step to do cause I'm not a computer wiz in that stuff.
