I want to access my system from internet. My network scenario is as follows;
Internet ==> DSL Modem(s) ==> Load Balance ==> Gateway Firewall ==> My PC DSL 1 : ZXDSL 831CII (Fixed IP)DSL 2 : HG510a Load Balance : TL-R480T+Gateway Firewall : pfSense (BSD)
my sister is having a pc in office which is connected to another pc (having net connectivity) over LAN. she is getting the LAN icon in network connections. till today she could not access internet on her pc.but today an engineer came, and changed proxy address or something in internet options>connections>lan settings and accessed internet. after he was over, he again changed something in lan settings and went away. now my sis is not able to access internet. what can i do
I just installed WIFI wireless camera in the house. I validated that I can access and view video within home WIFI network. However, I can't seem to access it remotely outside my home Wifi. I follwowed the instruction - found my IP address xxx.xx.xx.xxx : 85 and set port forwarding to 85 to IP camera.
i'm trying to connect my xbox360 to the internet. I'm upstairs, my modem and router are downstairs. I'd prefer not to have to get a wireless adaptor for my xbox, but if that's the only way, i'll settle with that.We have Comporium internet. I can get cable if I hook a cable box up to the coax port in the wall upstairs. I have been looking at coax to ethernet adaptors, hoping I could go from the coax in the wall, to the adaptor, right into the back of the xbox. Is this possible?
I want to block all program from accessing internet except one. I can do it using Windows Firewall but some programs doesn't get blocked!
And the list is too big to block them one by one (some programs doesn't get unchecked to block them).
I play online game (Counter Strike:CZ) that lags after some intervals (that lag is my actual problem) so i want to stop every app to access internet except my game.
I haven't been able to get a decent answer to no matter how much googling etc I do. We have a problem in our flat where any time someone downloads something everyone else in the flat loses access to the internet until that person finishes their download or stops it. We are all accessing the internet through the same router, 3 of us wirelessly and 1 wired. The computers which are for some reason blocked by the other person downloading can't even access the router to do a reset or work out whats happening. [URL] gives our download speed as 14.80Mbps which isn't great but okay for good old NZ.Why would it be that 1 person downloading is preventing the others from accessing the net, do some downloads somehow take full control of all the available bandwidth ?.And is there any way to make it so that it doesn't happen, like make it so no computer can use all the bandwidth at a time ?, ie my flatmate can download his whatever but I can still send emails etc at the same time.
I have the Apple Time Capsule connected to my ISP using PPPoE and it is working just fine creating a wired and wireless network. The IP address of TC is 192.168.1.1 and I have set it's DHCP range between .100 to .200Next, I wanted to add VPN to the router as I live outside the US and wanted to access some services in the US. So I got an ASUS router and flashed it with Tomato firmware.I assigned the ASUS as IP address of 192.168.1.10, connected this it to a LAN port on the Apple and used a DHCP type Internet connection to set it up. I then created a second WiFi Network and gave the DHCP range between .11 to .20Now using any Wi-Fi device, I can connect to either of these networks and browse the web just fine. The ASUS is all setup as a VPN client so any traffic going through the ASUS is through a US based VPN.
I have a DIR-615 router. I would like to know if it is possible to block a PS3 from accessing the internet completely, without blocking any other computers/devices. I have access to the router, but not to the PS3 itself.
I have a router and a server that are connected through two unmanage switches. The router has DSL service in it and I want to access the internet on the server but I can't. The two are in the same network and it is a static IP network. I can ping the router from the server.
how to block a user from using the internet when they plug their computer into a router. My roommate has refused to pay her share of the internet and, being a college student, I don't have enough money where I feel generous enough to let her have free internet after stiffing me. Basically, I have 2 routers at the moment (hoping to fix this soon): my Qwest modem works as a router but I also have a Linksys router connected to it. The only phone jack is in her room so I have no way of stopping her from plugging her computer straight into the modem and/or router. I've configured the wireless so that she would be unable to access the, wirelessly but I'd like to know how to prevent her accessing the internet when she plugs her computer directly into either component.
I have finally got netgear adapter to connect to router, and its connected, but not able to access any webpages. I am not receiving any bytes back. I had to manually type in a IP address, as it was not picking it up automatically. I have other devices connected to the router (laptop, ipad, iphones) and access web easily. I have tried hard resets, and shut downs all with no avail
I have a cisco 2811 router doing nat on my home network and it works fine.I've connected a cisco 2621 router to the 2811 both have serial T1 cards, I have enabled IP routing on both and have eigrp 1 process running. I can ping and telnet to each router and they are advertising the networks on each other. when i do a traceroute on the 2621 to an outside address or name example [URL]I get no reply.
So i have set up my Dir-615 router and it worked for about a week perfectly. Then one day i was able to connect to the router, but it says that there is no internet connection. This is untrue since i am able to connect to the internet if i unplug from its WAN port and put it straight into my laptop.
I have a VMware workstation on my host computer (windows 7) and the VMware workstation has a virtual machine (windows 7) on the host. We were trying to allow internet access only to the Virtual machine, i.e. to minimize exposure of the host to the internet. I tried to use Vlan Access Control list with MAC ACL to deny the host virtual machine from accessing the internet and allow all other traffic including the virtual machine. The configuration works for some time and after some time when the virtual machine continously pings the c3750 switch (wher the VACL is implemented), the host also pings the c3750 switch and re-establishes connection with the internet. But when we configured the c3750 switch to deny the VM and allow all other traffic, it works fine. It seems like the host automatically finds a way to get arround the VACL.
The last few weeks my WAG 160N stops accessing the internet perhaps four or five time a day. Pulling the power plug for 20 seconds and reconnecting it usually gets it going again - until the next time.
Also I have noticed the internet light - the right hand LED - is red every so often. The gateway is behind my PC so I haven't been able to see if it always correlates withe the lack of connection.
I just connected my WRT120N router to the modem of my Cable provider. Everything seems to work well, however every 1-3 days I cannot access internet anymore with my laptop. When I press "IP address release" button in the router settings everything seems to work fine for again 1-3 days. Is there any way I can prevent this from happening all the time?
Region : India Model : TL-WR740N Hardware Version : V4.20.0 Firmware Version : ISP : Lexus
I am using tp link router for accessing internet in my laptop and mobile. everything is opening in my laptop but i had few problems when using internet in mobile. im using android mobile. when using play store the images and screen shots of applications are not loading but im able to download. I'm unable to see the images in play store. So I'm thinking that there is something problem in router settings.
I have trouble accessing the internet from my laptop after installing Ciso AIR-LAP1142N-A-K9 AP.The AP are connetected to my router (which has a DHCP enabled) via a switch and each has a Fix IP address with network mask, gateway and DNS already configured. When I triy to connect to the access point, only the IP address and network mask are automatically assigned to the my laptop. and I have to manually input the gatway and DNS to be able to navigate the internet. I would like to know which configuration will allow any node that tries to connect the internet via the access point to be automatically configured to access the internet after authentication.
The problematic PC is AMD triple core, with ASUS M3N78 motherboard and xp professional. PC should connect to internet through the router, TP-Link TL WR340GD, along with 3 other PCs which are all working fine. Basically, the PC caught a virus and I performed system restore. After that, the PC was working fine, except that there was no internet connection. I tried to reset winsock from command promp, but that did not sort the connection problem.I noticed that the yellow light on the back of the tower, for the ethernet cable connection, is yellow when the cable is not plugged in, however, as soon as I plug the ethernet cable in, the light disappears. The same cable is working fine when connected to other PCs so it does not seem to be the cable problem. The information in Network Connections says Limited or no connectivity. Full messages when prompted says: "You might not be able to access the internet or some network resources. The problem occurred because the network did not assign a network address to the computer.To restart the connection and try to establish full connectivity, cliick Repair." and then, after clicking repair, it says:"Windows could not finish repairing the problem because the following action cannot be completed:Renewing your IP address.For assistance contact the person who manages your network."I also tried to release and renew IP address from command promp, but that did not work either.
Linksys WRT610N displays garbage when accessing the "Wireless Page" in Internet Explorer (from Windows 7 or Windows 8)My issues is simmilar to one reported here: url...Accessing my Linksys Wireless Router model WRT610N using IE opening "Wireless" page displays full screen of garbage characters (looks like chinese).
i have 2 system in same network connected in same switch sys-1 have internet access & sys-2 no internet blocked from fire wall,....Now i want to use internet on sys-2 through sys-1 without Proxy or lancard sharing...
I use a dongle from my ISP as my main internet connection source. I needed to do a full system restore because one of the windows system files got corrupted.After the restore, my internet connection was extremely slow. I restarted the computer and I got my normal fast speed but only for about 10 minutes and it is now very slow again (about 10 mins to load Google home page, for example).Internet speed was never an issue before the restore. Also I tried the dongle on my work laptop at home and it's fine.I'm using Windows XP. I've tried everything suggested at Slow Computer/Internet AFTER complete system restore but it is still slow.
my system an emachine e350 wouldnt share wireless connection to other computers but can receive perfectly well.when i try to set up an adhoc network,it does not show me turn on internet connection sharing,so when other computers try to connect,it just shows they re connected only on my system but not on the other ones and they cant access the internet also.the network discovery too wont stay on, every time i turn it on and save changes it goes back to off.
I am using Win XP and am hardwired to a router (NETGEAR N600 WIRELESS DUAL BAND ROUTER WNDR3400). This was connected hardwire to a cable modem and I had no problems. I recently downgraded to a DSL system and now have problems connecting to the internet. I was asked to disconnect my router and the problem seems to go away. After reconnecting my router it may be fine for a day or two and then the problems start again. Internet drops off while using it or I get a message saying "web page not available because DNS lookup failed. If I bypass my router at this time I can connect. Both my laptop (wireless) and my desktop (Ethernet) are having this problem.Norton Connect Safe is also in use which assigns its own DNS addresses.
A I went over to a friend's house to fix some problems with his computer. He has a Windows XP Home Edition desktop. I used System Restore to fix some kinks with it, and now the computer has no Internet access, and I have no idea how to get it back. I tried reversing the System Restore and turning it off, but that's not working. They said that the connection was fine, but that the computer could not read the modem.
I went to a thread with the same name as this one and tried all of the things in it but it still won't work, although some programs now work a bunch of other ones still can't connect since the restore.
Code: Windows IP Configuration Host Name . . . . . . . . . . . . : Mariama-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No
I have a DVR system. Which is configure in DMZ on my firewall. DVR internal IP is 192.168.2.13 and external IP is 27.34.xxx.xx. when I am able to access DVR by using internal IP and it works fine while accessing from the internet it not work proper. Though it prompt for username and password also. After enter the login credential its getting blank. I am able to telnet External IP from internet on port 80.