So i have set up my Dir-615 router and it worked for about a week perfectly. Then one day i was able to connect to the router, but it says that there is no internet connection. This is untrue since i am able to connect to the internet if i unplug from its WAN port and put it straight into my laptop.
View 8 Replies
I have a DIR-615 router. I would like to know if it is possible to block a PS3 from accessing the internet completely, without blocking any other computers/devices. I have access to the router, but not to the PS3 itself.
View 3 Replies View RelatedI have the Apple Time Capsule connected to my ISP using PPPoE and it is working just fine creating a wired and wireless network. The IP address of TC is 192.168.1.1 and I have set it's DHCP range between .100 to .200Next, I wanted to add VPN to the router as I live outside the US and wanted to access some services in the US. So I got an ASUS router and flashed it with Tomato firmware.I assigned the ASUS as IP address of 192.168.1.10, connected this it to a LAN port on the Apple and used a DHCP type Internet connection to set it up. I then created a second WiFi Network and gave the DHCP range between .11 to .20Now using any Wi-Fi device, I can connect to either of these networks and browse the web just fine. The ASUS is all setup as a VPN client so any traffic going through the ASUS is through a US based VPN.
View 5 Replies View RelatedRegion : India
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP : Lexus
I am using tp link router for accessing internet in my laptop and mobile. everything is opening in my laptop but i had few problems when using internet in mobile. im using android mobile. when using play store the images and screen shots of applications are not loading but im able to download. I'm unable to see the images in play store. So I'm thinking that there is something problem in router settings.
Background: This weekend, I lost my internet connection at home. I called my ISP and they sent someone over. The guy rewired the entire house (our ISP is also our tv cable provider), because he felt that our signal was probably weak due to the wiring. Long story short, after two hours of rewiring and fixing the cable outside out house (chewed through by a squirrel), he said the modem's signal was back to normal and left.
When I plugged the router; however, it refused to hold the internet connection for more than a few seconds. On the front panel, the planet-shaped light turned orange, then blue (for a few seconds) and then turned off entirely. I tried another few times and got the same result. At best, it stayed connected for a minute, until I rebooted my computer. The laptops in our house do read the presence of the router, so it's safe to assume that the problem lies with the router's capacity to receive the signal.
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro
Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address
Any step by step instructions (for the DIR-655) on how to block a PS3 from accessing this router? I know how to log into the router's page and I can get the MAC address of the PS3, but I am clueless from there. I want to block it completely is possible.
View 7 Replies View RelatedIs there any way to access the router's configuration pages (192.168.0.1) via the Guest wireless network when routing between the zones is disabled?
Here's the story:
I am using my landlords wireless internet, but I administer the router myself. The router is 'upstairs' and i am 'downstairs' and he has his computer plugged into it plus one wireless laptop. He knows nothing about computers and is vulnerable to downloading viruses (and other ****) and I don't want my computers to be on the same 'network' as his.
I had a brilliant idea that since I am 100% wireless, I can make a guest network, put all my computers on that network and disable routing between them. Now all of my computers (some connected through a wireless bridge) can not see his computers at all (perfect!). The only problem now is I can no longer access the router config pages at 192.168.0.1!
Is there any way I can segregate my computers from his and also access the router config? I've tried accessing the WAN IP for the remote admin pages from inside the NAT, but it still blocks it.
how to block a user from using the internet when they plug their computer into a router. My roommate has refused to pay her share of the internet and, being a college student, I don't have enough money where I feel generous enough to let her have free internet after stiffing me. Basically, I have 2 routers at the moment (hoping to fix this soon): my Qwest modem works as a router but I also have a Linksys router connected to it. The only phone jack is in her room so I have no way of stopping her from plugging her computer straight into the modem and/or router. I've configured the wireless so that she would be unable to access the, wirelessly but I'd like to know how to prevent her accessing the internet when she plugs her computer directly into either component.
View 2 Replies View RelatedI have a cisco 2811 router doing nat on my home network and it works fine.I've connected a cisco 2621 router to the 2811 both have serial T1 cards, I have enabled IP routing on both and have eigrp 1 process running. I can ping and telnet to each router and they are advertising the networks on each other. when i do a traceroute on the 2621 to an outside address or name example [URL]I get no reply.
View 4 Replies View RelatedI just connected my WRT120N router to the modem of my Cable provider. Everything seems to work well, however every 1-3 days I cannot access internet anymore with my laptop. When I press "IP address release" button in the router settings everything seems to work fine for again 1-3 days. Is there any way I can prevent this from happening all the time?
View 1 Replies View RelatedI am setting up 1811w router for accessing internet.DHCP is configured on it but it is not providing IP to laptop connected on port fa6. [code]
View 3 Replies View RelatedI have been using my D-Link Wireless G Router for more than one year now and haven't met any connection problem with it until a month ago. I can no longer access the internet when the Internet cable is plugged in the router. I can access the net when the cable is plugged directly to our desktop. I bought a new router which is TP-Link TL-WR470N but the results are still the same. I tried configuring both routers using DHCP and Static IP settings but nothing changes. Power Cycling doesn't change anything. Renewing the IP, resetting WINSOCK and DNS makes no progress for me.
Here are details of my system:
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) Dual Core Processor 5050e, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 1790 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430, 512 Mb
Hard Drives: C: Total - 152617 MB, Free - 132217 MB; D: Total - 152617 MB, Free - 152481 MB;
Motherboard: eMachines, WMCP61M
[code]....
I don't know where to begin but I have about 4 land lines to the router, and 2-3 wireless computers. But what I notice is that the internet connection is very slow and things drop. My downloads would be incomplete, and streaming is terribly slow. My torrent downloads will always reset. Simply put, this type of internet connection is terrible.
View 14 Replies View RelatedYesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies View RelatedI recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
I cant get this damn thing to connect to the internet (att dsl modem). I have ran the installation cd mulitple times and also configured it using the http. If i reset it while everything is hooked up and it makes an internet connection using DCHP (I think its called), but i need a PPPoE connection.
It seems to change my password (the username one that access the modem). The way i know is it always has more characters that the one i was provided by my isp with (*****). I dont enter any information other than my username or password (IP is dynamic).
I have a westell F90-6100 as my modem.
I have a D-Link DIR-655 Router with a Motorola SB5101. When the computer is directly plugged into the modem i get 10Mpbs but when it is connected to the modem (either wireless or wired) the max speed is >3Mbps.
View 3 Replies View RelatedThis only started about a week ago and everything was working fine before then. My router is causing my internet to be slow (I know this because it goes at normal speed when I am connected directly to my modem)
View 1 Replies View Related I've been testing it out at home where I use another D-Link with no problem. What I'm seeing is that I can connect to the router (wired or wireless) but no internet connection is reported. I believe I have also tried pinging a web site by IP address alone with no luck.
ISP: Version DSL
Router: DIR-615,
Hardware version B2
Firmware version: 2.20
I've tried turning modem and router off, waiting a few minutes, then turning on modem and letting it connect then turning on the router. That doesn't work. As best I can tell the two routers have the same settings. The ISP is using Dynamic IP (DHCP) connection.
I upgraded the firmware everything was fine. This may not be realted to the firmware. I can now connect to the Router but cannot get any Internet or data to transmit wireless. Plug in directly it works fine.
View 14 Replies View RelatedI have a broadband connection through a TV cable connection to a ISP provided modem/wireless box. I have a wireless network set up already from this box. I wanted to extend the wireless network to a hard to reach area so i bought a seperate router (d-Link DIR-615 revE3).
I connected one of the 4 LAN outputs from the modem to the router's "Internet" input. Windows 7 detected the new router's wireless network and guided me through setting up a name and password for it. However there is actualy no internet access on this network even though it's directly connected to the modem.I was thinking that i wanted to just extend the original wireless network but a new network is fine if only it would use the internet from its LAN connection... a desktop computer has connected from the same LAN output of the modem without any security and been able to access the internet from it.
I have 2 computers connected to the router (via cable). The problem is that have to reboot the router several times per day because one or both computers lose their internet connection. This happens regardless if one or two computers are turned on.
Router: DIR-615
Firmware version 4.00
Hardware version: D1
Computer1: Win7 64
Computer2: Win Vista 64
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_v1_120822
ISP : Maxis
Using the MR-3040 with the MA180 on Maxis network?The connection seems to come up, it will be usable for awhile and then after that Internet access is not available. Looking at the Status page on the MR-3040 it says 3G is connected. Doing a Diagnostic ping, nothing is reachable.
I am trying to get neighbour wireless router working. He has a D-Link DIR-615 Wireless N 300 Router. I have gotten the router working by manually putting in his PPPoE settings. Now with a wired XP SP3 computer connected via Ethernet, it can access the internet. We then configured his router for WPA2 with AES encryption. We were able to connect up his phone which can handle a WiFi connection. He was able to surf the web using the WPA2 passphrase. So far, so good. The last bit was the upstairs computer which has a PCI D-Link wireless N card in it. That computer runs XP SP2 and we have not been able to get it to connect to the internet.We have tried both Windows networking, and the D-Link Wireless management software. We were unable to get WPA2 working, so we tried WPA, WEP, and finally no security. In each case, we can get the computer to connect to the router by putting in the passphrase (except when no security), and the status changes to Connected. But then browsers are not able to open any internet site.
I have checked the ipconfig settings, they seem to be correct. DHCP is providing the computer with a valid local IP (192.168.0.102), and the gateway is correctly listing the D-Link router.Subnet mask is 255.255.255.0. The downstairs Ethernet connected computer has an IP of 192.168.0.100, so they are on the same subnet.We have tried turning "Windows Wireless Zero Configuration" service off, and also tried with it on.We have switched between using the D-Link client and allowing Windows to manage wireless settings. It finds the wireless network, and connects with the passphrase with a good strong signal, but internet persists in not working.I do not have MAC Filtering turned on.I have turned off the Windows Firewall on the wireless computer. What else am I missing?
My computer is almost always on. My modem and router are always on.Last night I was using the internet, no problems.This morning I woke up to find "No Internet Access".My computer was connecting to the router just fine, but the router was showing a orange Earth symbol on the front (not green).I connected the computer directly to the modem and internet works just fine. After powering off both the modem and router and checking all the connections ... still the router is not "reading" the internet from the modem. And still the internet is there if I connect the modem directly to the computer (that's how I am online and posting this right now).
View 1 Replies View RelatedHad this router for few months working fine, than the modem was slow for our house so we got a new modem called Actiontec Model#GT701D. And we did the Set up but the Internet doesn't work anymore. If we connect the modem to Pc, it works but connecting modem to router it doesn't receive Internet. Another problem wad that for the DIR655 to work we needed to connect another router before DIR655 connected to modem, so we needed to have an extra router to get the DIR655 to work.
View 1 Replies View RelatedMy DIR-601 stops connecting to the internet so I have to power cycle the router daily, the 2.00 FW is not posted on the DLink Website. I don't have this problem with my Linksys router. E-mailing DLink doesn't facilitate since they tell me to call, and I don't want to sit through menus and scripts. Hardware rev is B1. Connection fails on both wired and wireless.Also, as a side item, D-Link should ignore MAC filter for wired connections.
View 14 Replies View RelatedI have a very interesting problem, that I cannot figure out at all after trying test after test. The problem in a nutshell:I connect a wireless access point to our network and within 10-15 minutes any wired LAN users internet connection goes down, yet the wireless internet works fine.Here is how our small business network is setup:1. We have a Server 2000 that serves as our companies domain controller and DHCP (I know, I know..dated). We also have another server on our network, which is a Server 2003, which is primarily a backup domain to our Server 2000 and hosts Quickbooks that our employees use and a small intranet website via ISS. We are connected to a router from our ISP with a gateway IP of 192.168.1.2. Our ip address structure is 192.168.1.xxx and subnet is 255.255.255.0.
2. I have configured the AP to be just that, an access point to broadcast wirelessly and made sure that DHCP is turned off on the router. I set it to a static ip of 192.168.1.215 and subnet of 255.255.255.0 and our default gateway of 192.168.1.2. Once I connect it, everything works fine for about 20-30 minutes, then our LAN internet goes down. The Wireless G access point that I am using is a TP-Link Model TL-WA501G.
Linksys WRT610N displays garbage when accessing the "Wireless Page" in Internet Explorer (from Windows 7 or Windows 8)My issues is simmilar to one reported here: url...Accessing my Linksys Wireless Router model WRT610N using IE opening "Wireless" page displays full screen of garbage characters (looks like chinese).
View 2 Replies View RelatedRegion : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
