No Internet Connection Using TP-Link TL-WR470N Router?
Dec 22, 2012
I have been using my D-Link Wireless G Router for more than one year now and haven't met any connection problem with it until a month ago. I can no longer access the internet when the Internet cable is plugged in the router. I can access the net when the cable is plugged directly to our desktop. I bought a new router which is TP-Link TL-WR470N but the results are still the same. I tried configuring both routers using DHCP and Static IP settings but nothing changes. Power Cycling doesn't change anything. Renewing the IP, resetting WINSOCK and DNS makes no progress for me.
Here are details of my system:
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) Dual Core Processor 5050e, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 1790 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430, 512 Mb
Hard Drives: C: Total - 152617 MB, Free - 132217 MB; D: Total - 152617 MB, Free - 152481 MB;
Motherboard: eMachines, WMCP61M
[code]....
View 13 Replies
ADVERTISEMENT
Apr 8, 2013
Region : Brazil
Model : TL-WR470N
Hardware version: v2 Firmware version
latest (updated yesterday)
ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
View 3 Replies
View Related
Mar 25, 2012
I don't know where to begin but I have about 4 land lines to the router, and 2-3 wireless computers. But what I notice is that the internet connection is very slow and things drop. My downloads would be incomplete, and streaming is terribly slow. My torrent downloads will always reset. Simply put, this type of internet connection is terrible.
View 14 Replies
View Related
Jul 21, 2011
Yesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies
View Related
Nov 13, 2011
I recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
View 14 Replies
View Related
Apr 13, 2011
I cant get this damn thing to connect to the internet (att dsl modem). I have ran the installation cd mulitple times and also configured it using the http. If i reset it while everything is hooked up and it makes an internet connection using DCHP (I think its called), but i need a PPPoE connection.
It seems to change my password (the username one that access the modem). The way i know is it always has more characters that the one i was provided by my isp with (*****). I dont enter any information other than my username or password (IP is dynamic).
I have a westell F90-6100 as my modem.
View 6 Replies
View Related
Oct 20, 2011
I have a D-Link DIR-655 Router with a Motorola SB5101. When the computer is directly plugged into the modem i get 10Mpbs but when it is connected to the modem (either wireless or wired) the max speed is >3Mbps.
View 3 Replies
View Related
May 11, 2011
This only started about a week ago and everything was working fine before then. My router is causing my internet to be slow (I know this because it goes at normal speed when I am connected directly to my modem)
View 1 Replies
View Related
Oct 19, 2011
So i have set up my Dir-615 router and it worked for about a week perfectly. Then one day i was able to connect to the router, but it says that there is no internet connection. This is untrue since i am able to connect to the internet if i unplug from its WAN port and put it straight into my laptop.
View 8 Replies
View Related
Dec 29, 2011
I have a broadband connection through a TV cable connection to a ISP provided modem/wireless box. I have a wireless network set up already from this box. I wanted to extend the wireless network to a hard to reach area so i bought a seperate router (d-Link DIR-615 revE3).
I connected one of the 4 LAN outputs from the modem to the router's "Internet" input. Windows 7 detected the new router's wireless network and guided me through setting up a name and password for it. However there is actualy no internet access on this network even though it's directly connected to the modem.I was thinking that i wanted to just extend the original wireless network but a new network is fine if only it would use the internet from its LAN connection... a desktop computer has connected from the same LAN output of the modem without any security and been able to access the internet from it.
View 3 Replies
View Related
Feb 6, 2012
I have 2 computers connected to the router (via cable). The problem is that have to reboot the router several times per day because one or both computers lose their internet connection. This happens regardless if one or two computers are turned on.
Router: DIR-615
Firmware version 4.00
Hardware version: D1
Computer1: Win7 64
Computer2: Win Vista 64
View 15 Replies
View Related
Nov 9, 2012
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_v1_120822
ISP : Maxis
Using the MR-3040 with the MA180 on Maxis network?The connection seems to come up, it will be usable for awhile and then after that Internet access is not available. Looking at the Status page on the MR-3040 it says 3G is connected. Doing a Diagnostic ping, nothing is reachable.
View 4 Replies
View Related
Jan 15, 2013
Region : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
View 2 Replies
View Related
Apr 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
View 1 Replies
View Related
May 4, 2013
I had my exisiting Huawei 3G Dongle replaced with a new LTE USB Dongle Huawei E392 from M1 Singapore. The router dectects it and I was able to get on to the Internet. But every after few mins, the connection will just hang and I have to go into the router to re-establish the connection.
View 2 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
May 29, 2011
I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies
View Related
Mar 21, 2011
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies
View Related
Apr 15, 2013
Region : Hongkong
Model : TL-WDR4300
Hardware Version : V1
During long, heavy download streams (such as BT, video streaming) the router WDR4300 would still lock up the internet (WAN) connection for that client. I could still go to the admin web page on that client but no internet activity would occur until either rebooting the router.
View 8 Replies
View Related
Jan 26, 2012
My DIR-655 has worked for 2 years, but can no longer access the internet. My ISP is (Rockbridge Global Village -sub of Ntelos) and my modem is a Zhone. My connection type is DHCP, QoS is set to active, and the IP address boxes are not being filled in. The cables check out ok and there is no problem connecting to the internet if I bypass the DIR-655 and connect direct to the modem. Hardware is A4 with firmware 1.21
Nothing has changed in the house with regards to new cordless phones or wireless devices and I am using the same Zhone modem. I have tried returning to factory defaults and reconfiguring.
View 14 Replies
View Related
Dec 24, 2011
I have bought a new router to my parents these days, it a DIR-615 HW H1 firmware version 8. We have a ZyXEL Prestige 2000 series DLS modem.
There is no problems with connection to the DIR-615 router, but the strange problem occurs when I plugs in the internet cable. At the beginning the internet start to work fine but after some time the internet does not work anymore. What may cause the problem? The internet works if I plug the internet cable in my computer and it also work with the old router.
View 3 Replies
View Related
Nov 8, 2011
Yesterday, my linksys router broke down suddenly. I went to the store and bought a new one, a d-link DIR-615. After plugging it in and setting it up, i tried loading web pages and it worked ok. It wasn't as fast as my linksys router but it was fine. When i tried loading youtube videos, that wasn't the same story. The videos didn't load. It started playing but then stopped after a couple of seconds. When i connected my computer directly to the modem, the videos loaded fast. There seems to be something wrong with the video streaming.
View 9 Replies
View Related
Mar 5, 2013
I recently bought a dlink 825 and it seems right out of the box the wired internet connection seems very poor. Wireless works fine but it on wired the router refuses to download any files larger than 300kb. Images won't load, files won't downloads, etc. I've swapped cables, tried two different computers, hard reset, loaded the 3.01 firmware and nothing seems to work. I went back to my old router and it works fine. I am able to transfer from computer to computer okay with the 825,The cable modem is a SA dpc2100.
View 3 Replies
View Related
Mar 10, 2011
Here is my configuration. My new DIR-601 router is connected this way. Wan port to Isp modem, LanP1 to a Win7 Pc1, LanP2 to a Linksys router, DHCP diisable using the 4 LAN ports as a switch in wich 2 Pc are connected 1) Win Xp PC2 and 2) Ubuntu 10.04 PC3.
The problem is , I can not access internet behind the telesyn switch, PC2 and PC3 have no access to Html servers on the Wan, except if I define PC2 or PC3 , only 1 allowed at a time, as DMZ. If I plug PC2 or PC3 directly in DIR-601 port everything is ok.
Why DIR601 port connected to a switch does not work the same way than conected to a PC. Any solution to give Internet access to PC behind a switch ?
NB: This work if I replace DIR601 with DIR620 router.
View 10 Replies
View Related
Mar 4, 2012
I have seen several posts regarding internet connection dropping. Mine does the same. I have a cable modem in front of the router. The router is setup with two SSID's (one 2.4GHz, and the other 5GHz). So often the connectivity to ENET drops, forcing me to power cycle the router. Other then the two SSID's, the router setup is factory default. I need to debug this. I have noriced that the DNS IP addresses do not show up under setup. Where do I start?
View 6 Replies
View Related
Jan 19, 2011
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies
View Related
Jan 8, 2012
I have a working internet connection (AT&T) but it is not being detected during the router setup. Is there a manual setup procedure that I can try?
View 1 Replies
View Related
Nov 4, 2012
Configured a D-Link DIR-601 router? The internet is connected, but there is a yellow triangle with a exclamation mark on the bottom right corner stating it isn't connected. I read the manual and did everything as listed, but still have the same issue.
View 4 Replies
View Related
Dec 30, 2012
My router keeps dropping my internet connection. I wonder If its the ISP cable modem that drops it and messes up my router forcing me to reboot. Drops it cause of some time out; or the like.If I can have the router periodically send a signal to my modem
View 1 Replies
View Related
Apr 7, 2013
I have some questions about DIR-655 want to ask.
1.I use it as a AP, no connection in the internet port, however I only see the DNS setting in the WAN interface, so some url setting can not normally run. Do it has AP mode or other setting that can resolve the DNS.
2.I notice that the Time will suddenly wrong something, even I set it to use local time or ntp.
3.I change the wireless setting to WPA Enterprise, and notice that always disconnect and reconnect, When it is disconnect, notebook and phone can not search the wireless, but ping in local is still alive, log also only show that reconnect, what is happen?
4.I run the internet wizard (not at beginning), I do not change new password in the second phase of wizard, however, after the end of wizard, restart the DIR 655, I can not use the password I set before to login and also I try to leave blank in password flied, it also failed, I use the same password in the user(not admin), I can login, is it the bug of wizard, if this situation need to reset the router, can I take the config first?
View 10 Replies
View Related
Jan 10, 2013
my internet connection keeps dropping recently. I first thought it was caused by my router, so I bought a new router D-Link DIR 835 but the problem still exists and seems even worse.
View 1 Replies
View Related
Feb 2, 2011
How do I get internet connect to all connected to the switch. One computer can access internet right now but the other cannot.
View 1 Replies
View Related
Jun 29, 2011
I have a fibre optic internet connection, the modem being connected to the TP Link wireless router. The set up works fine most of the time, but at times all the computers connected lose internet connection. The ISP says everything is fine from their end, and locally we are all connected to the wireless router just fine when this happens. I usually just unplug the modem and the wireless router from their power, in order to reset everything, and this seems to solve it.
View 4 Replies
View Related
