I recently bought a dlink 825 and it seems right out of the box the wired internet connection seems very poor. Wireless works fine but it on wired the router refuses to download any files larger than 300kb. Images won't load, files won't downloads, etc. I've swapped cables, tried two different computers, hard reset, loaded the 3.01 firmware and nothing seems to work. I went back to my old router and it works fine. I am able to transfer from computer to computer okay with the 825,The cable modem is a SA dpc2100.
I have a D-Link DWA 510 and it's been perfectly fine, no hassles. Until about a week ago. Since then, not a lot has changed in my computer except for a new PSU/CPU and Keyboard and Mouse. Nothing has changed about the router, it's just the card that's messing up.
What I've tried: Reinstalling the drivers Updating Rolling Back Changing PCI card position
I'm up for trying many things. I just want some reliability until Saturday/Sunday when I buy my new card.
I have 2 routers the first is plugged into the telephone line and has a power-line adapter plugged into it the second router which is downstairs is just to extend the range,unfortunately I have a very poor connection (wireless) and internet often drops out. I want to reset the power-line adapter but but will this mean that the connection will be lost from the second router and it is just my computer that is wrong? My trouble is that I don't think the power-line adapter is working but it might be or... its just that the they both connect between each other wirelessly? Or do they both connect to each other wirelessly? both connections from each router are pretty poor. I have updated my wireless card as well. I am not resetting the power line adapter until I know the internet is going to be fine afterwards as my Dad needs it for his work
I run a DIR-825 as an access point on my home network and I upgraded the firmware from 2.03Na to 2.05NA and it looks like it was a poor flash. Orange Amber power light, no wireless radios, unable to access it via its configured ip or default (192.168.0.1). It will not respond to pings, give arps, or obviously the web browser session.Is there any way to reflash these things manually or do I have to send it in?
I have been having considerably slow internet compared to the other guys I live with and decided to investigate. I have run the speedtest.net on a good chunk of their computer and they all get around 40 mb/s while I am getting 2 mb/s. I have figured out that when I go in and change my MAC Address, I am able to get the same speed that they do for a short amount of time, but after a while(I haven't figured out a time interval) my speeds go back to the 2 mb/s. I can then go back in and change the address again and the same thing happens. I thought I might have a virus, but the different scan that I have tried running show nothing and when I do netstat from the command prompt, nothing abnormal shows up.
I had an old Belkin wireless USB adapter that I used with it for the first few days, but I got tired of the slow speeds that I had always known to be associated with that card. So today I went and bought a CISCO PLEK400 powerline networking adapater. Brought it home, plugged it in to my router in my living room, plugged it into my PC in my bedroom, gave it a quick little test drive. First I went to speakeasy to test the up/down speed. Never more than 1.5Mbps down/1Mbps up. My laptop, running wirelessly through the same router, generally hits 20Mbps down and ~2Mbps up. So I plugged the ethernet cable into my laptop, to see if maybe it was the network card in my desktop that was faulty. Speakeasy speed test showed 1.5down/1up wired for laptop as well. Pinging google through command prompt, on either laptop OR desktop while wired, nets a ~300ms response time.
I have a DSL connection with AT&T. It is rated at 6Mbps / 768Kbps, but it closer to 4Mbps / 600Kbps. I have a speed stream 5360 connected to the DIR655. Devices on my network are primarily wireless and include; several laptops, a desktop (which is wireless n), a couple phones / Ipods and a Wii that I watch Netflix on.
I do a lot of Photography and a handful of video work, and backup / share everything online. When I am uploading photos, even with "conserve bandwidth" turned on in the uploading application, browsing sites is very slow, but reasonably functional. If I try to upload a video to YouTube, I can barely manage to do anything else the entire time it is uploading. I've tried to plan and run all my uploads overnight, but then Netflix is unusable when I want to watch it at night.
I've tried several different things, first off, with getting the Wii to function for Netflix, I turned on the QOS engine, for the IP that is assigned to it, and set it to priority 1 for all ports. I also have a entry in the QOS engine for SSH on port 23 with a priority of 10 because of how laggy my SSH sessions are. I do not have any other entries in the QOS engine, is that a problem? Should there be entries that cover other services and assign them a lower priority?
I have enable traffic shaping and Automatic uplink speed turned on. It measured the uplink speed at 695kbps, which is pretty accurate. I have Automatic Classification off, and Dynamic Fragmentation on. WISH is enabled also. I'm set to mixed n, g, and b, I'm not positive, but I do think my older laptops only use wireless b.
Even more importantly than the Netflix would be to allow me to use the Internet in a functional manner while I am uploading, that would solve a lot of problems. It seems that the uploads just hog every last bit of upload bandwidth and don't want to make room for even the small requests that one needs to send to view a web page.
I replaced a Dir-655 at a coffee shop, with a new dir-655 a few weeks ago. They keep calling and saying that Windows clients are not working and that Mac clients do.My first thought is that they are overloading the router but I would think that all computers would have problems not just the Windows computers. could the router be so bogged down that it takes to long for DHCP request for windows computers assigning the IP twice?
I have tried 2 DIR-655 routers now, revision B1, firmware versions 2.04, 2.07, 2.08beta and a number of laptops and wireless mini pci-e nics and I simply CAN'T get faster than about 10 megabytes/sec transfer speed from a wireless laptop to a wired gigabit desktop.
Is this just simply a limitation of these routers? Can they simply not transfer data at decent speeds? I've seen real world transfer speeds near 12 megabytes/sec on a DIR-615 and I assumed the limiting factor there was the 100megabit wired connection.
I've spoken to a dozen different D-Link phone support workers
I have purchased a Dell Inspiron 15 R 5520. the wire less net work for this laptop is very limited. i am loosing connection aftre, i am moving 4 meter away from the source.
i have other dell laptop at home, but thats works well.
A few days ago I received my DIR-655 I ordered off Amazon and hooked it up. There were no problems the first day after initial setup. The next day I noticed that I was losing internet connection even though the wifi indicator on my laptop said otherwise. This happens for about 5 minutes at a time and on other devices such as my desktop and my iPad. And I hopped on Call of Duty last night and played a competition with some friends and gave everyone 4bar connection. Later that night, I was playing some more and people that connected to me received 1bar connection and I got that in return on their connection. I feel that the router isn't working with my devices right?
I'm having some connection problems with my new laptop (Dell XPS 14z).When I'm close to my router (D-Link DIR 635), the connection works just fine.When I'm a bit further from my router, I get a poor connection and a slow speed. I've tested 2 other laptops at the same spot, both of which have no problem with the connection.
We have two Cisco AP541N running our wireless network in the office. They're configured with the same SSID, so that people are automatically switched between the two access points depending on their location in the office.
Frequently we are experiencing very poor performance of our wireless connections and it seems to be related to when 4-5 clients are connected to one access point. After restarting it (which also moves the 5 clients to the other access point), the performance problem goes away for a while.
I've upgraded one to firmware version AP541N-K9-2.0(1) (the other is running AP541N-K9-1.8(0)), but it doesn't seem to work.
Region : Denmark Model : TL-WDR4300 Hardware Version : V1 Firmware Version : 3.13.23 Build 121225 Rel.37950n ISP : Fullrate
No matter what I try, the signal strength never gets better that 30%, even when I have my laptop next to the router. I have tried various settings (found in these forums), but nothing seem to work. My old D-Link performed better, both close and over distances.
Region : India Model : TL-MR3040 Hardware Version : V1 Firmware Version : 3.14.2 Build 120822 Rel.40902n ISP : Aircel (chennai, India)
Recently I bought a TP-Link 3G portable battery powered router ( model no: TL-MR3040).After connecting I get this status: please see picture ( file name 1)
1.jpg: My problems are: I cant find Aircel Network provider(Chennai , India) in the Mobile ISP list, As you can see the second picture below I can see all network providers except Aircel Network Provider : Please see the picture 2 ( file name is 2)
2.jpg and frequently disconnecting and very very poor Wireless coverage (less than 10 feet) I have sent many mails to TP-Link technical support team. I didnt get a single reply from them.
So recently I've gotten a new laptop, but now when I try to connect to out wireless internet from my room it has an extremely weak signal and will constantly suffer from constant disconnects and spikes in latency. Occasionally it causes web pages to load incorrectly and makes games unplayable when they were fine before and videos will take a long time to load. The new laptop has a different network adapter ( Intel Centrino Advanced-M 6235 ) and has Windows 8 installed instead of Windows 7 like my old laptop had. The problem happened both when using my router at my house and one at my friend's house which uses an entirely different router. The problem seems with my laptop and not specific to any one router.When trying to ping google.com it will usually stay at around 31ms but will occaisonally jump to around something much higher like 300ms or so for a few pings then go back to normal. If trying to do something like playing a game then it can start shooting all the way up to over 1000-2000 and will sometimes just have the request time out. [code]
I own a ea4500 wireless router, I have tested the speed at speedtest.net and wirelessly I get around 9 mbps. My speed is 23 mbps when I hard wired the pc. I have check the speed on a tablet ( android ), pc and a mac to about 5 feet away from the router with no walls or anything between the two devices.I have checked all the settings but I don't see anything wrong, I have changed to N mode only to make sure I use top speed.All my devices are able to use N.
Im getting really poor performance on my 1841, my intial thoughts was a duplex mismatch however although im getting a few CRC errors (root cause unknown at this point) not enough to suggest that the this is the issue.
Heres the config:
Building configuration.Current configuration : 5274 bytesLast configuration change at 20:31:01 PCTime Sun Dec 18 2011 by admin_xversion 15.1no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryptionservice sequence-numbers!hostname xxxxxx!boot-start-markerboot-end-marker!!security authentication failure rate 10 log
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
My DIR-655 has worked for 2 years, but can no longer access the internet. My ISP is (Rockbridge Global Village -sub of Ntelos) and my modem is a Zhone. My connection type is DHCP, QoS is set to active, and the IP address boxes are not being filled in. The cables check out ok and there is no problem connecting to the internet if I bypass the DIR-655 and connect direct to the modem. Hardware is A4 with firmware 1.21
Nothing has changed in the house with regards to new cordless phones or wireless devices and I am using the same Zhone modem. I have tried returning to factory defaults and reconfiguring.
I have bought a new router to my parents these days, it a DIR-615 HW H1 firmware version 8. We have a ZyXEL Prestige 2000 series DLS modem.
There is no problems with connection to the DIR-615 router, but the strange problem occurs when I plugs in the internet cable. At the beginning the internet start to work fine but after some time the internet does not work anymore. What may cause the problem? The internet works if I plug the internet cable in my computer and it also work with the old router.
Yesterday, my linksys router broke down suddenly. I went to the store and bought a new one, a d-link DIR-615. After plugging it in and setting it up, i tried loading web pages and it worked ok. It wasn't as fast as my linksys router but it was fine. When i tried loading youtube videos, that wasn't the same story. The videos didn't load. It started playing but then stopped after a couple of seconds. When i connected my computer directly to the modem, the videos loaded fast. There seems to be something wrong with the video streaming.
Here is my configuration. My new DIR-601 router is connected this way. Wan port to Isp modem, LanP1 to a Win7 Pc1, LanP2 to a Linksys router, DHCP diisable using the 4 LAN ports as a switch in wich 2 Pc are connected 1) Win Xp PC2 and 2) Ubuntu 10.04 PC3.
The problem is , I can not access internet behind the telesyn switch, PC2 and PC3 have no access to Html servers on the Wan, except if I define PC2 or PC3 , only 1 allowed at a time, as DMZ. If I plug PC2 or PC3 directly in DIR-601 port everything is ok.
Why DIR601 port connected to a switch does not work the same way than conected to a PC. Any solution to give Internet access to PC behind a switch ?
NB: This work if I replace DIR601 with DIR620 router.
I have seen several posts regarding internet connection dropping. Mine does the same. I have a cable modem in front of the router. The router is setup with two SSID's (one 2.4GHz, and the other 5GHz). So often the connectivity to ENET drops, forcing me to power cycle the router. Other then the two SSID's, the router setup is factory default. I need to debug this. I have noriced that the DNS IP addresses do not show up under setup. Where do I start?
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
Configured a D-Link DIR-601 router? The internet is connected, but there is a yellow triangle with a exclamation mark on the bottom right corner stating it isn't connected. I read the manual and did everything as listed, but still have the same issue.
My router keeps dropping my internet connection. I wonder If its the ISP cable modem that drops it and messes up my router forcing me to reboot. Drops it cause of some time out; or the like.If I can have the router periodically send a signal to my modem
1.I use it as a AP, no connection in the internet port, however I only see the DNS setting in the WAN interface, so some url setting can not normally run. Do it has AP mode or other setting that can resolve the DNS.
2.I notice that the Time will suddenly wrong something, even I set it to use local time or ntp.
3.I change the wireless setting to WPA Enterprise, and notice that always disconnect and reconnect, When it is disconnect, notebook and phone can not search the wireless, but ping in local is still alive, log also only show that reconnect, what is happen?
4.I run the internet wizard (not at beginning), I do not change new password in the second phase of wizard, however, after the end of wizard, restart the DIR 655, I can not use the password I set before to login and also I try to leave blank in password flied, it also failed, I use the same password in the user(not admin), I can login, is it the bug of wizard, if this situation need to reset the router, can I take the config first?
my internet connection keeps dropping recently. I first thought it was caused by my router, so I bought a new router D-Link DIR 835 but the problem still exists and seems even worse.
I have been using my D-Link Wireless G Router for more than one year now and haven't met any connection problem with it until a month ago. I can no longer access the internet when the Internet cable is plugged in the router. I can access the net when the cable is plugged directly to our desktop. I bought a new router which is TP-Link TL-WR470N but the results are still the same. I tried configuring both routers using DHCP and Static IP settings but nothing changes. Power Cycling doesn't change anything. Renewing the IP, resetting WINSOCK and DNS makes no progress for me.
Here are details of my system:
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit Processor: AMD Athlon(tm) Dual Core Processor 5050e, x86 Family 15 Model 107 Stepping 2 Processor Count: 2 RAM: 1790 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430, 512 Mb Hard Drives: C: Total - 152617 MB, Free - 132217 MB; D: Total - 152617 MB, Free - 152481 MB; Motherboard: eMachines, WMCP61M
