D-Link DIR-655 :: No Connection In Internet Port
Apr 7, 2013
I have some questions about DIR-655 want to ask.
1.I use it as a AP, no connection in the internet port, however I only see the DNS setting in the WAN interface, so some url setting can not normally run. Do it has AP mode or other setting that can resolve the DNS.
2.I notice that the Time will suddenly wrong something, even I set it to use local time or ntp.
3.I change the wireless setting to WPA Enterprise, and notice that always disconnect and reconnect, When it is disconnect, notebook and phone can not search the wireless, but ping in local is still alive, log also only show that reconnect, what is happen?
4.I run the internet wizard (not at beginning), I do not change new password in the second phase of wizard, however, after the end of wizard, restart the DIR 655, I can not use the password I set before to login and also I try to leave blank in password flied, it also failed, I use the same password in the user(not admin), I can login, is it the bug of wizard, if this situation need to reset the router, can I take the config first?
View 10 Replies
ADVERTISEMENT
Feb 18, 2011
I installed the DIR 655 router using the install disk. I hooked up my Vista desktop machine via the ethernet port. I also activated a Roku box and my Itouch successfully via the wireless.I turned MAC filtering on and manually entered the MAC addresses for the three devises. Everything worked fine.After I rebooted the desktop, I could no longer get to the internet via the desktop connected through the ethernet. The Roku Box and I-Touch both work fine and enjoy a strong wireless connection.I've tried rebooting the desktop several times, but still can not access the web. I also can not access the router by typing in 192.168.0.1. I entered the configsys stuff and verifited that I am using the right numbers.
View 14 Replies
View Related
Oct 19, 2011
DLink DIR655
H/W Ver B1
F/W Ver 2.00NA
I've configured my 655 and I can access the internet through it. Network cable from PC goes to the DLINK, DLINK to the DSL modem, DSL modem to the big scary internet. This all works great. Now for the Wi Fi.I've set up the Wi Fi on the 655 and can both see and connect to my newly configured home network from my laptop, but I can not access the internet from the laptop.
View 2 Replies
View Related
Feb 16, 2011
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
View 2 Replies
View Related
Feb 5, 2013
Since a few days, when I go on Web with my cable connection, the pages of sites stay on a blank page and that does not connect. Having made diagnose, I had the following message:The distant ring road(peripheral) or the resource does not accept the connection.The ring road(peripheral) or the resource [URL] is not configured to accept the connections on the port " Web Service (HTTP) ".I phoned at my FAI ( Videotron) and having discussed for a long time, it happened at the conclusion that it was a problem of router (when I connect the computer directly on the modem, that works very well).Of an other one quoted(esteemed), a connection Wireless telegraphy works with no problem at all, fortunately because I shall not be here.I am to go to my router D-Link Dir-835 and I returned to the former(old) protection(saving) of the configuration. And now that re-works again. But the enjoyment was short-lived because this morning, the problem returned.What do you think about it? I Should make a reset of my router even if it means re-configuring everything again?
[URL]
View 2 Replies
View Related
Jun 10, 2011
I have tracked about 7 unique IPs originating from China where these scans for accesses to my network are causing 2-10secs of downtime in realtime gaming. Never had this problem when I was using Firmware 1.34NA. Stuck with 1.35NA and its causing lots of eyesores even though Wifi has been great with my laptop and phone for N/G. I only keep my main PC on and my 2 fileservers are offline until need to start archiving data or fetch something from them. Wifi is disabled until I need my laptop and phone. I personally had my ISP do an inhouse checkup and fixed some splitter issues and a new coax cable so signal issue is fine. Motorola 6120 Cable modem. Was pushed to contact my ISP Abuse group to figure this out but it might be a lingering issue for awhile.
View 4 Replies
View Related
Feb 7, 2013
Region : Germany
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 121127
is it possible to use the Print Server on the TL-WR1043ND without installing the "Printer Controller Utility"? I have a HP LaserJet 1022 (in compatiblity list) connected which is recognized by the TL-WR1043ND. I want to connect the printer manually to my Windows PC using standard tcp/ip port, but I can't get it working. I tried RAW with Port 9100 and LPR with lp1. What are the right settings??
View 1 Replies
View Related
Jan 23, 2013
Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0
Build 120926 Rel.27100n
ISP : Bigpond
I am trying to setup port-forwarding (6360 for IP 192.168.1.111 & 6361 for IP 192.168.1.112) on this TD-W8968 modem. But when I test it on [URL]. I get a message "connection refused".
View 2 Replies
View Related
May 17, 2011
I am facing a strange problem with my DIR 601 router. I am not able to access internet when I plug in the cable from my model to slot marked nternet' on the back of the model (which I guess is the right way). However, I can access the internet if I plug in the cable coming from modem into any of the 4 ports marked as 'LAN'.
View 2 Replies
View Related
Mar 21, 2011
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies
View Related
Feb 21, 2011
Can I use a mobile internet modem on the USB port?
View 10 Replies
View Related
Jun 15, 2010
Application can connect, but doesn't get any response back. Bypassing router solves the problem.Looks like there are not too many settings I can change allowing/disallowing particular ports for outgoing traffic.How to fix this so I can watch mms streams?I called DLink support, opened the case DSI-400-927087.First rep there suggested to turn on multicast.Then rep asked to change link speed from Auto 10/100 to just 100Mb and to reduce MTU from 1500 in increments to 1400. So I had to revert to my old Linksys router BEFSR41 from 8 years ago. This one works fine with MMS streams.
View 8 Replies
View Related
Nov 16, 2012
I have an telemetry equipment which have one ethernet RJ45 port, so I have an internet connection and I can connect to this device remotely using a browser on my PC for security reason I want to feed this device with a second internet connection that is coming from a cellular line , can I just put the two different Internet cables into a switch and from that switch connect my device?
View 1 Replies
View Related
Dec 16, 2011
I recently purchased the netgear n300 ADSL2+ modem router. I have tried all day to get it to work, but I have not have any success.
ISP: Verizon (Now frontier I think)
DSL light will be solid green, along with the port, wifi, etc... But the internet one stays solid red.I've tried changing dns settings and things, but to no avail. Though I am able to login to the router, and I can get internet if I directly connect to the modem.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersRobert>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Robert-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I noticed in the router settings that the internet port had no ip address, as in it was just 0.0.0.0.
View 19 Replies
View Related
Feb 14, 2013
I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients. I have my primary computer/desktop PC connected via wired connection. I also have several wireless clients (laptop, iPad, iPhones, etc.). All have been performing normally. However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.
It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website. This continues as long as I'm using the desktop PC. When I stop using the desktop, the weather bridge resumes normally.
I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it. It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work. I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.
On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion. According to the settings, it can do 10 or 100, full or half. I have it set to AUTO.
View 3 Replies
View Related
Jan 20, 2012
Linksys x2000.Is it possible to use ADSL port as a main internet connection and to use WAN port as a backup internet connection?
View 1 Replies
View Related
Jul 30, 2011
I have a BEFSX41 connected to a Motorola SB6120. I changed my plan for a hgih speed, but did not see it.Had a tech out and we found when direct connected to my computer, I get 50 Mbps. When connected through the router, about 9 Mbps. I swapped cables, but still the same.
Is there any way to determine the connection speed on the Internet port? It seems that it only running at 10, when both the router and modem support 100.
View 4 Replies
View Related
Jan 26, 2012
My DIR-655 has worked for 2 years, but can no longer access the internet. My ISP is (Rockbridge Global Village -sub of Ntelos) and my modem is a Zhone. My connection type is DHCP, QoS is set to active, and the IP address boxes are not being filled in. The cables check out ok and there is no problem connecting to the internet if I bypass the DIR-655 and connect direct to the modem. Hardware is A4 with firmware 1.21
Nothing has changed in the house with regards to new cordless phones or wireless devices and I am using the same Zhone modem. I have tried returning to factory defaults and reconfiguring.
View 14 Replies
View Related
Dec 24, 2011
I have bought a new router to my parents these days, it a DIR-615 HW H1 firmware version 8. We have a ZyXEL Prestige 2000 series DLS modem.
There is no problems with connection to the DIR-615 router, but the strange problem occurs when I plugs in the internet cable. At the beginning the internet start to work fine but after some time the internet does not work anymore. What may cause the problem? The internet works if I plug the internet cable in my computer and it also work with the old router.
View 3 Replies
View Related
Nov 8, 2011
Yesterday, my linksys router broke down suddenly. I went to the store and bought a new one, a d-link DIR-615. After plugging it in and setting it up, i tried loading web pages and it worked ok. It wasn't as fast as my linksys router but it was fine. When i tried loading youtube videos, that wasn't the same story. The videos didn't load. It started playing but then stopped after a couple of seconds. When i connected my computer directly to the modem, the videos loaded fast. There seems to be something wrong with the video streaming.
View 9 Replies
View Related
Mar 5, 2013
I recently bought a dlink 825 and it seems right out of the box the wired internet connection seems very poor. Wireless works fine but it on wired the router refuses to download any files larger than 300kb. Images won't load, files won't downloads, etc. I've swapped cables, tried two different computers, hard reset, loaded the 3.01 firmware and nothing seems to work. I went back to my old router and it works fine. I am able to transfer from computer to computer okay with the 825,The cable modem is a SA dpc2100.
View 3 Replies
View Related
Mar 10, 2011
Here is my configuration. My new DIR-601 router is connected this way. Wan port to Isp modem, LanP1 to a Win7 Pc1, LanP2 to a Linksys router, DHCP diisable using the 4 LAN ports as a switch in wich 2 Pc are connected 1) Win Xp PC2 and 2) Ubuntu 10.04 PC3.
The problem is , I can not access internet behind the telesyn switch, PC2 and PC3 have no access to Html servers on the Wan, except if I define PC2 or PC3 , only 1 allowed at a time, as DMZ. If I plug PC2 or PC3 directly in DIR-601 port everything is ok.
Why DIR601 port connected to a switch does not work the same way than conected to a PC. Any solution to give Internet access to PC behind a switch ?
NB: This work if I replace DIR601 with DIR620 router.
View 10 Replies
View Related
Mar 4, 2012
I have seen several posts regarding internet connection dropping. Mine does the same. I have a cable modem in front of the router. The router is setup with two SSID's (one 2.4GHz, and the other 5GHz). So often the connectivity to ENET drops, forcing me to power cycle the router. Other then the two SSID's, the router setup is factory default. I need to debug this. I have noriced that the DNS IP addresses do not show up under setup. Where do I start?
View 6 Replies
View Related
Jan 19, 2011
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies
View Related
Jan 8, 2012
I have a working internet connection (AT&T) but it is not being detected during the router setup. Is there a manual setup procedure that I can try?
View 1 Replies
View Related
Nov 4, 2012
Configured a D-Link DIR-601 router? The internet is connected, but there is a yellow triangle with a exclamation mark on the bottom right corner stating it isn't connected. I read the manual and did everything as listed, but still have the same issue.
View 4 Replies
View Related
Dec 30, 2012
My router keeps dropping my internet connection. I wonder If its the ISP cable modem that drops it and messes up my router forcing me to reboot. Drops it cause of some time out; or the like.If I can have the router periodically send a signal to my modem
View 1 Replies
View Related
Jan 10, 2013
my internet connection keeps dropping recently. I first thought it was caused by my router, so I bought a new router D-Link DIR 835 but the problem still exists and seems even worse.
View 1 Replies
View Related
Feb 2, 2011
How do I get internet connect to all connected to the switch. One computer can access internet right now but the other cannot.
View 1 Replies
View Related
Dec 22, 2012
I have been using my D-Link Wireless G Router for more than one year now and haven't met any connection problem with it until a month ago. I can no longer access the internet when the Internet cable is plugged in the router. I can access the net when the cable is plugged directly to our desktop. I bought a new router which is TP-Link TL-WR470N but the results are still the same. I tried configuring both routers using DHCP and Static IP settings but nothing changes. Power Cycling doesn't change anything. Renewing the IP, resetting WINSOCK and DNS makes no progress for me.
Here are details of my system:
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) Dual Core Processor 5050e, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 1790 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430, 512 Mb
Hard Drives: C: Total - 152617 MB, Free - 132217 MB; D: Total - 152617 MB, Free - 152481 MB;
Motherboard: eMachines, WMCP61M
[code]....
View 13 Replies
View Related
Jun 29, 2011
I have a fibre optic internet connection, the modem being connected to the TP Link wireless router. The set up works fine most of the time, but at times all the computers connected lose internet connection. The ISP says everything is fine from their end, and locally we are all connected to the wireless router just fine when this happens. I usually just unplug the modem and the wireless router from their power, in order to reset everything, and this seems to solve it.
View 4 Replies
View Related
Mar 25, 2012
I don't know where to begin but I have about 4 land lines to the router, and 2-3 wireless computers. But what I notice is that the internet connection is very slow and things drop. My downloads would be incomplete, and streaming is terribly slow. My torrent downloads will always reset. Simply put, this type of internet connection is terrible.
View 14 Replies
View Related
Nov 11, 2011
My D-link DIR-825 keeps loosing the internet connection from my modem regularly during the day and requires a reboot to get it to work again. The computer I'm using is wired to the router. Its very frustrating having to reboot it every 5 minutes
[code]....
View 13 Replies
View Related
