D-Link DIR-655 :: Can't Get Internet Connection Via Ethernet Port
Feb 18, 2011
I installed the DIR 655 router using the install disk. I hooked up my Vista desktop machine via the ethernet port. I also activated a Roku box and my Itouch successfully via the wireless.I turned MAC filtering on and manually entered the MAC addresses for the three devises. Everything worked fine.After I rebooted the desktop, I could no longer get to the internet via the desktop connected through the ethernet. The Roku Box and I-Touch both work fine and enjoy a strong wireless connection.I've tried rebooting the desktop several times, but still can not access the web. I also can not access the router by typing in 192.168.0.1. I entered the configsys stuff and verifited that I am using the right numbers.
View 14 Replies
ADVERTISEMENT
Nov 16, 2012
I have an telemetry equipment which have one ethernet RJ45 port, so I have an internet connection and I can connect to this device remotely using a browser on my PC for security reason I want to feed this device with a second internet connection that is coming from a cellular line , can I just put the two different Internet cables into a switch and from that switch connect my device?
View 1 Replies
View Related
Feb 14, 2013
I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients. I have my primary computer/desktop PC connected via wired connection. I also have several wireless clients (laptop, iPad, iPhones, etc.). All have been performing normally. However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.
It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website. This continues as long as I'm using the desktop PC. When I stop using the desktop, the weather bridge resumes normally.
I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it. It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work. I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.
On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion. According to the settings, it can do 10 or 100, full or half. I have it set to AUTO.
View 3 Replies
View Related
Feb 7, 2011
My D-Link won't allow my laptop to connect to the Internet through an Ethernet connection. I set up the router using a standard Ethernet patch cable and cloned the laptop's MAC address to connect through the Mediacom modem. I then decided to test out the wireless and got that all set up, works perfect. Now I cannot connect to the Internet using the Ethernet cable.
View 1 Replies
View Related
Apr 7, 2013
I have some questions about DIR-655 want to ask.
1.I use it as a AP, no connection in the internet port, however I only see the DNS setting in the WAN interface, so some url setting can not normally run. Do it has AP mode or other setting that can resolve the DNS.
2.I notice that the Time will suddenly wrong something, even I set it to use local time or ntp.
3.I change the wireless setting to WPA Enterprise, and notice that always disconnect and reconnect, When it is disconnect, notebook and phone can not search the wireless, but ping in local is still alive, log also only show that reconnect, what is happen?
4.I run the internet wizard (not at beginning), I do not change new password in the second phase of wizard, however, after the end of wizard, restart the DIR 655, I can not use the password I set before to login and also I try to leave blank in password flied, it also failed, I use the same password in the user(not admin), I can login, is it the bug of wizard, if this situation need to reset the router, can I take the config first?
View 10 Replies
View Related
Oct 19, 2011
DLink DIR655
H/W Ver B1
F/W Ver 2.00NA
I've configured my 655 and I can access the internet through it. Network cable from PC goes to the DLINK, DLINK to the DSL modem, DSL modem to the big scary internet. This all works great. Now for the Wi Fi.I've set up the Wi Fi on the 655 and can both see and connect to my newly configured home network from my laptop, but I can not access the internet from the laptop.
View 2 Replies
View Related
Jul 3, 2012
There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies
View Related
Jan 13, 2011
TWC / Road Runner modem
dir-655 - Hardware Version: B1
Firmware Version: 2.00NA
dap-1522
windows xp
xbox 360
powerphone voip adapter
Here is my setup:
TWC / RR cable modem to 655
655 port to xp machine
655 port to voip adapter
655 wireless to 1522
1522 port to xbox 360
I am no guru but managed to get all this working about 6 months ago. Other than some TWC outages it has been fine.Couple days back the XP stopped seeing the net. It could still see the LAN. The voip adapter and 1522 / xbox 360 still work fine.Here is what I have tried:
Plugged XP in 1522, worked fine.
Plugged XP directly into cable modem, worked fine.
Plugged XP into port the voip is working on, did not work.
Tried other 3 ports on 655, did not work.
Since the XP machine works with the 1522 and cable modem I am assuming the XP machine is not the problem.Since the voip adapter works on the 655 ports I am assuming the ports are not the problem.
View 2 Replies
View Related
Apr 4, 2011
Got BT Infinity installed today, thought I would ditch the Home-hub 3 and go back to my tried and tested WAG320N. Got it configured, set the first ethernet port to WAN and got a connection.Ran speed test.net and comes out at 26Mbit.using the Home-hub 3.0 I get 37.5MBit.
View 4 Replies
View Related
Jan 18, 2013
Region : Vietnam
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 build 120524 rel 05221
ISP : VNPT
Where is the PVC Ethernet Port Mapping in TD W8961ND?
View 1 Replies
View Related
Apr 29, 2012
I am facing low relaiblity issue in one of the ethernet port even no link is connected to that port.
Router model : cisco 3660
IOS - c3660-ik8s-mz.122-24a.bin
Ethernet1/2 is up, line protocol is down
Hardware is AmdP2, address is 0007.85fb.c312 (bia 0007.85fb.c312)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
[Code]...
View 2 Replies
View Related
Oct 20, 2011
I have my bigpond internet setup on my main pc,works fine connected to a router but i want to connect to the internet via ethernet cable on my 2nd pc. I have a ethernet port on the wall near it so that should work. I don't want to run a long ethenet cable from my router to my 2nd pc because there's a ethernet port right next to it.
View 6 Replies
View Related
Oct 29, 2012
getting near my home internet keeps shutting off and i lose the internet for half hour periods of time or more now im sure it will get worst as the storm gets closer. i run my cell phone usb tethered to the pc how do i setup my pc to share that internet from the ethernet cord so i can say run my xbox online plugged into the pc ethernet jack?
View 2 Replies
View Related
Apr 10, 2013
I already configured my LAN connection to only have an IP address, and a subnet mask, leaving default gateway blank
View 3 Replies
View Related
Feb 16, 2011
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
View 2 Replies
View Related
Dec 9, 2012
I have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]
View 3 Replies
View Related
Nov 18, 2012
I've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies
View Related
Dec 2, 2011
I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
View 4 Replies
View Related
Feb 7, 2012
I have two computers in my house that are connected via ethernet using a switch. One computer is connected to a friends internet connection by wireless using a satellite dish. That computer is on XP and I have configured it as follows (IPv4)[CODE]
View 4 Replies
View Related
Dec 2, 2012
How can I get 2 internet connections for 2 in home computers from 1 cable internet connection.
View 1 Replies
View Related
Dec 26, 2011
I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.
------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo
[code]....
View 7 Replies
View Related
Feb 13, 2013
First is your output from TSG SysInfo program:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 32643 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 304892 MB, Free - 237708 MB;
Motherboard: MSI, Z77A-G45 (MS-7752)
Antivirus: Windows Defender, Disabled
You must realize that I live away from the city and only have an iPhone 4 for a hot spot. It connects via WiFi, Bluetooth and USB. I have found USB quicker, but it doesn't seem to work under Windows 8. So I connect via WiFi only.I have a LAN, based on a D-Link DIR-615 router. This router has a WiFi option and has a Buffalo File server attached to the device that we use as a backup/file server and personal 'cloud'. When I am connected via WiFi and I plug in the Ethernet connection, the computer overrides the WiFi and attempts to connect to the Internet via the Ethernet port. It does know that the WiFi is connected as it is displayed on the bottom of the status bar as 'Internet', but choices to ignore or not check. I have gone to the devices and changed the priority to be Wireless on top and Ethernet on the bottom. This is done via the "Network and Sharing Center", "Change Adapter Settings", ALT-F (to get "File, Edit, View, Tools, Advanced and Menu" options), "Advanced" and finally "Advanced" again.Then put them in the priority you wish. Ethernet still overrides this and times out when I attempt to access anything on the Internet. It works the same on my wife's Windows 7 Laptop. It returns to normal if you unplug the Ethernet cable. Since I wish to have other files available, it is a pain in the bottom to have to unplug the Ethernet cable every time you change over to do something else and I usually forget and have to deal with the 'can't connect' message.It might be a simple solution to connect via WiFi to the router then hard wire the computers to the router, but this hasn't been a workable option. The router doesn't seem to be able to handle that type of connection?
View 11 Replies
View Related
Jan 2, 2011
I have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies
View Related
Mar 23, 2012
Im having a ACT Broadband internet connection, he provides internet connection through a wire which runs into my room that can be directly connected to the my computers NIC. Whenever i switch on my computer and opens the browser it first redirects to the page url... where it asks for Username & Password, our ISP gives us a IP Address which displays on the web page after logging in.I want the internet connection to be shared with my roommates so i bought a 8 port Ethernet switch (url..), which is having a uplink port also. I have connected the wire given by the ISP to the up link port of the switch & i connected my PC to one port of the switch with another network cable. I also connected my friends PC to second port of switch with another network cable, my problem is that when i sign into my ISP web page and start using the internet & my friend also wants internet in his PC & when he opens the browser the ISP's webpage is appearing and when he sign's in internet is disconnecting in my Pc. I tried to change the IP but as a default IP is given by the ISP if change the IP internet is not working.
View 3 Replies
View Related
Jul 2, 2012
I'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor!I also plan to connect to the TV.
View 1 Replies
View Related
Jul 2, 2012
I'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor! I also plan to connect to the TV.
View 1 Replies
View Related
Sep 26, 2012
I am trying to connect internet through Ethernet LAN .But I am unable to access internet. It says unidentified network with limited connectivity or local only access. But the same connection is working fine on other laptop. I checked the device manager and every looks working fine.In my ipconfig /all details, my Eternet LAN physical address shows all zeroes and has no default gateway address .Also the DNS servers address shows some alphabets instead of numbers.
View 14 Replies
View Related
Mar 21, 2013
So, for some reason my internet connection started disconnecting about every 1-5 minutes. It worked fine this morning, however, when I turned my PC on a few hours ago it became very unstable. After it happens I have to reconnect to internet (it doesn't work all the time, I usually have to do it two times for it to work), and then again after a few minutes the connection dies. Tried restarting my computer, tried restarting the modem, tried the troubleshooting network thing (it keeps saying "Local Area Connection doesn't have a valid IP configuration", but gives no solution). Also, I tried connecting on my cellphone and on a laptop and both of those work. However, those connect through WiFi, while my PC is connected through an ethernet cable[code]
View 4 Replies
View Related
Oct 13, 2012
As of around a week ago, I've been experiencing a strange thing with my internet connection. I live in apartments that provide internet to everyone that lives there, and had been living here for a few months before this started happening.I now constantly have my internet crashing in the middle of browsing/gaming. I will either open up my laptop to the internet not working already, or it will work, but crash randomly while I am using it.
Trying to load a page on google chrome, it will show a message saying DNS Lookup Failed, and an icon will pop up in the right corner of my screen with a yellow (!) triangle. If I hover over it, it will say no internet access.I've followed the few steps they had on there, but none of them worked. I've never had a problem like this before, and haven't made any modifications to anything on my computer lately, so I am pretty confused as to why this is happening. I know it is something on my end, because my roommate's internet is just fine, and even used my ethernet cord on her computer, and no problems at all.
View 3 Replies
View Related
Dec 8, 2012
I was wondering if there was any way i could have the wireless connection go in to my laptpop then have the laptop convert it to an ethernet connection that i could then run to my ps3.
View 2 Replies
View Related
Apr 30, 2011
I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies
View Related
Feb 5, 2013
Since a few days, when I go on Web with my cable connection, the pages of sites stay on a blank page and that does not connect. Having made diagnose, I had the following message:The distant ring road(peripheral) or the resource does not accept the connection.The ring road(peripheral) or the resource [URL] is not configured to accept the connections on the port " Web Service (HTTP) ".I phoned at my FAI ( Videotron) and having discussed for a long time, it happened at the conclusion that it was a problem of router (when I connect the computer directly on the modem, that works very well).Of an other one quoted(esteemed), a connection Wireless telegraphy works with no problem at all, fortunately because I shall not be here.I am to go to my router D-Link Dir-835 and I returned to the former(old) protection(saving) of the configuration. And now that re-works again. But the enjoyment was short-lived because this morning, the problem returned.What do you think about it? I Should make a reset of my router even if it means re-configuring everything again?
[URL]
View 2 Replies
View Related
Apr 16, 2013
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : I am trying to set up my router for about 2 days without any effect.
Here you can find, what I have to do to connect through Ethernet cable to the internet at our university:[url]....
When I set auto-detect IP on router, it says that I have Static IP. In CMD I can find out all the information about the connection and the licence is usually for one day (automatically renewing). I've also tried to clone MAC address, nothing happened.
View 1 Replies
View Related
