D-Link DIR-655 :: Suddenly No Net On Ethernet Port?
Jan 13, 2011
TWC / Road Runner modem
dir-655 - Hardware Version: B1
Firmware Version: 2.00NA
dap-1522
windows xp
xbox 360
powerphone voip adapter
Here is my setup:
TWC / RR cable modem to 655
655 port to xp machine
655 port to voip adapter
655 wireless to 1522
1522 port to xbox 360
I am no guru but managed to get all this working about 6 months ago. Other than some TWC outages it has been fine.Couple days back the XP stopped seeing the net. It could still see the LAN. The voip adapter and 1522 / xbox 360 still work fine.Here is what I have tried:
Plugged XP in 1522, worked fine.
Plugged XP directly into cable modem, worked fine.
Plugged XP into port the voip is working on, did not work.
Tried other 3 ports on 655, did not work.
Since the XP machine works with the 1522 and cable modem I am assuming the XP machine is not the problem.Since the voip adapter works on the 655 ports I am assuming the ports are not the problem.
View 2 Replies
ADVERTISEMENT
Feb 18, 2011
I installed the DIR 655 router using the install disk. I hooked up my Vista desktop machine via the ethernet port. I also activated a Roku box and my Itouch successfully via the wireless.I turned MAC filtering on and manually entered the MAC addresses for the three devises. Everything worked fine.After I rebooted the desktop, I could no longer get to the internet via the desktop connected through the ethernet. The Roku Box and I-Touch both work fine and enjoy a strong wireless connection.I've tried rebooting the desktop several times, but still can not access the web. I also can not access the router by typing in 192.168.0.1. I entered the configsys stuff and verifited that I am using the right numbers.
View 14 Replies
View Related
Jan 18, 2013
Region : Vietnam
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 build 120524 rel 05221
ISP : VNPT
Where is the PVC Ethernet Port Mapping in TD W8961ND?
View 1 Replies
View Related
Apr 29, 2012
I am facing low relaiblity issue in one of the ethernet port even no link is connected to that port.
Router model : cisco 3660
IOS - c3660-ik8s-mz.122-24a.bin
Ethernet1/2 is up, line protocol is down
Hardware is AmdP2, address is 0007.85fb.c312 (bia 0007.85fb.c312)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
[Code]...
View 2 Replies
View Related
Mar 25, 2011
Ive been using my Sony Vaio laptop (windows 7) to connect to my uni halls internet connection by ethernet cable (and keysurf login) for months with no problems, now all of a sudden my ethernet cable is not being recognised. its not a problem with my connection or cable as other people's laptops work on it. and its not a problem with my hardware as my laptop works in other people's rooms. its just the combination of my laptop and my connection. My friend did something along the lines of resetting the IP address, but not really sure what he did. So i've done a full recovery of my computer.
View 3 Replies
View Related
Oct 14, 2011
I was just browsing the net when all of a sudden internet lost connection.I am using Windows 7 64-bit Home Edition.I tried these solutions, but didn't work;
---reboot pc
---turn off the modem, wait 10 minutes and turn it back on
---ipconfig /release, /renew in admin mode
---built-in Windows troubleshooting
---updated drivers
---use different ethernet cables
I contacted a floormate (I'm in college) yet his wired internet works. I have tried wireless. It worked.I have been using the connection for months and this is the first time it has happened.url...
View 1 Replies
View Related
Feb 14, 2013
I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients. I have my primary computer/desktop PC connected via wired connection. I also have several wireless clients (laptop, iPad, iPhones, etc.). All have been performing normally. However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.
It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website. This continues as long as I'm using the desktop PC. When I stop using the desktop, the weather bridge resumes normally.
I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it. It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work. I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.
On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion. According to the settings, it can do 10 or 100, full or half. I have it set to AUTO.
View 3 Replies
View Related
Apr 25, 2011
My pc is windows xp an has service pack 3, the adaptor is realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC. I have 3 gig of memory and a very larg nvidia card. OK my pc has worked absolutely fine until this weekend when my sister came and her son was on my pc when everyone was in bed. He attempted to print of not less than 88!! pictures he had acquired from different sites but i had disconnected the printer so it didnt take place. When they left earlier today i switched on my pc and there was a virus alert so i ran a scan. These got put into the chest. I then attemtpted to close down the programmes that had come back up when i switched on and this is when it happened. The pc told me it was going to shut down and when it restarted i had not internet connection. I checked the modem and the ethernet light is out.
View 5 Replies
View Related
Dec 26, 2011
I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.
------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo
[code]....
View 7 Replies
View Related
Apr 30, 2011
I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies
View Related
Oct 12, 2011
i have a 54G wireless home router ..... successfully port fowarded an application from a CPU (server).... but after no connection made from the user to the server..... it suddenly close the application ..... so what i did is to reboot the router in order to refresh the connection ...... Is there any other ways to fix this sudden close of the ports ?
View 9 Replies
View Related
Jul 3, 2012
There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies
View Related
Oct 14, 2012
if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.
View 1 Replies
View Related
Apr 4, 2012
I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.
View 2 Replies
View Related
Feb 21, 2012
I've had a DIR-600 for years, and this past month it has been really bad. I have a 3mbps Cable connection, always worked fine and fast, but since the start of the month I've been getting, at most, 60kb/s of download speed (I have a wired connection to the router). Speed tests register everything as fine, except for the download speed, which is really unstable and shoots all over the place, going from 1MB/s to 0 in some instances. I thought it was the ISP being bad since we're having a lot of problems with this provider where I work, but got tired of it and decided to do some troubleshooting myself. When I connect directly to the modem, without the router, I get the same fast speeds I used to. I tried rebooting everything, I tried resetting the router to factory defaults, but nothing seemed to change that. DL speed is always below 60KB/s and if something is downloading at that speed, a single page takes a minute to load.
View 3 Replies
View Related
Jul 14, 2012
I upgraded to the new FW today 2.07 and everything seemed fine. Then suddenly i lost my internet connection. I can connect through the modem ok. Cables are ok. I am using my desktop with a wired connection. The 'world' light is not on
View 2 Replies
View Related
Dec 26, 2011
I have a D-Link DIR-615 Hardware Version: E3 Firmware Version: 5.10 and I am using this as an access point with the DHCP disabled (secondary router) and my primary router is located down stairs and it is also a DIR-615 Hardware Version: B2 (192.168.0.1) and this issue didn�t develop until later over time and I have made absolutely no network configuration or ISP changes at all the internet has been working fine confirmed with Time Warner Cable and for more than six months and I out the DIR-615 Hardware Version: E3 Firmware Version: 5.10 router has been bringing down the entire network/internet access and I can confirm this router is causing the network/internet to go down and windows notification will say the network only has limited access and I am also unable to access the router page (192.168.0.2) state I have to remove it and restart it D-Link can take a look into this issue I believe this might be a bug and I confirmed on the website that this is the latest version.
View 15 Replies
View Related
Dec 6, 2011
I have a Dlink Dir-615 router and a Motorola SB6120 Modem. For some reason the router suddenly says it's receiving internet access from the modem. It has worked for several months beforehand. I tried another Dlink modem and got the same results. I have my computer hooked directly to the modem hence the ability to make this post.
View 5 Replies
View Related
Apr 15, 2011
I have a DIR-825 (B) for over a year now. This morning, the wireless on it suddenly stopped working. Meaning, all my machines not longer seeing the signal from that router. If I hardwire to it, it will work fine. I have check the wireless settings and they all look fine.
View 2 Replies
View Related
Oct 2, 2011
I've been using my DCS-930L happily for the last month. Today, it suddenly stopped working. I haven't made any changes to my network or any configurations in about 2 weeks, during which the camera has worked fine locally as well as remotely. Now, if I unplug/plug it back in, the camera will immediately connect. However, after a period of time, it's no longer accessible, even from my local network. When I try to log-in to the camera or view it, it cannot be found or connected to. So it doesn't seem to be any of my configuration, but something that's intermittent or happens after awhile.
View 1 Replies
View Related
Nov 6, 2012
I have had a setup in which my four DCS-930Ls transfer picture every 15 minutes over a Dovado-router connected to a mobile broadband modem. This has worked perfectly until this last night. No pictures are transferred and upon using the test FTP function the status page just says "Testing ...." forever. I've also tested e-mailing picture without success.
View 2 Replies
View Related
Nov 10, 2011
I have this D-Link DIR-825 and it was working fine till yesterday. All of a sudden it stopped connecting to internet. I restarted it and tried to login to the router but failed. I called the support and did a hard reset of the router. After that when I am not able to connect to the router from my computer for configuring it again. When I connected the Router to my computer via LAN cable sometimes the LAN port is glowing and sometimes it is not. I tried different LAN Cables too. But nothing is working and I am not able to get to the router page.
View 5 Replies
View Related
Feb 14, 2013
Until yesterday my various equipment was networking to each other and the internet without a problem. After i reset my d-link DSL-2640B router (would this initiate an update?) my x-box would not connect to the internet, There is no problem connecting to the router and the home network. Everything is talking to each other and everything else is connected to the internet including the TV. The router must just be blocking the x-box and only from yesterday. I checked ports that are talked about and i think i set up port triggering, but then noticed the firewall is disabled anyway.
View 10 Replies
View Related
Apr 21, 2013
Region : Others
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version :
ISP :
after year and a half of using TL-WR741 ND router, it suddenly stop working during the night. I have no problems with router before this happened (I think only one or two reset in 1 year and 6 months). System led light does not flash (some sytem error) and I can't access to 192.168.1.1 router setup site. I tried almost everything, unplug power, reset etc. for almost 100 times, reconnect the router with modem and PC in all posible ways, but still can't establish connection or even access to router's setup. Obviusly internet works fine?
View 3 Replies
View Related
Nov 28, 2012
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120213 Rel.30335
ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
View 1 Replies
View Related
May 13, 2013
Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro
Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address
View 1 Replies
View Related
Dec 14, 2011
I have a dir-655 xtreme N gigabit router with 2.03NA version firmware. The wireless signal will suddenly and randomly disappear from my laptop. I checked the properties of the network connected it remains on the same channel when it reconnects so I figure it's not a channel issue.I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from stopping.
Computer: dell inspiron 6400
OS: windows XP pro (sp3)
ISP service: DSL
Modem: stand alone (Sagemcom 4300)
Router: dlink / xtremeN gigabit router / dir655
Set for mixed g, n and b wireless mode
Security: wpa-personnal / TKIP
Firmware: version 2.03NA
View 14 Replies
View Related
Feb 22, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Charter 20Mb
I've had the router for 3+ months, and was very happy until about a week ago. Since then, it's started doing what many others here have reported: freezing where it's impossible even to access the web interface, requiring a reboot. When this happens, router's SYS and WLAN lights both freeze (either on or off, seems to be random wherever they are at the instant). The other lights continue to flicker. Freezes occur anywhere from half an hour to several hours apart.Network includes three ethernet wired devices (1 computer, 2 Ooma VOIP adapters), 1 TB NTFS hard drive via USB (music storage), 4 wi-fi devices (1 computer, 1 network streamer, 1 printer, 1 Roku streamer).Use the router extensively to stream music from the USB-connected hard drive, but the freezes also happen when not streaming.Have already done a factory reset of the router. Currently running plain vanilla installation except for enabling security settings and the USB drive, and it's still happening.
View 3 Replies
View Related
Sep 5, 2011
I use a D-Link DWA-552 Xtreme Wireless-N PCI adapter on my Windows XP Home SP3 desktop computer that has been working flawlessly for months, until last night when it suddenly stopped being able to connect.I was just on the web last night doing what I normally do, and all of a sudden out of no where I lost internet connection and I couldn't get it back. I've tried resetting the router downstairs, I've tried restarting and shutting down the computer, and did three system restores (that all failed anyway), and none of these things are getting my connection back. Now also for some reason I can't even open up my network adapter's wireless network manager anymore because it closes itself not even a second after I boot it up.The modem and router downstairs look perfectly fine and all the other computers in the house, even the laptops, can all connect but mine, so something must be up with my network adapter.
View 14 Replies
View Related
Jan 3, 2012
Just this weekend, my DIR-655 has suddenly started blasting out continuous IGMPV2 Membership broadcasts, causing a flood of network traffic that's not normal and is interfering with other traffic. Rebooting everything in the system didn't fix it, turning off the other machines on the network (3 + NAS) didn't fix it, and I couldn't find anything in the configuration of the DIR-655 to stop it.
View 3 Replies
View Related
Dec 8, 2012
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
certain websites couldn't be accessed on any of our devices (mixture of PC's, android and apple devices)After trying everything I could think of and even phoning our internet provider nothing would get the sites to load (Facebook, hotmail to name but two)A friend of mine also said he was having exactly the same problems whereas no one else I know had any problems!.Anyway, after much scratching of head with resetting the router to factory defaults etc the only thing left to test was a direct connection with the modem where all websites worked perfectly!So the problem is 100% the router! Even after a factory restore it still doesn't work with those websites and after talking to my friend it turns out he too has a tp-link router but a different model.
View 3 Replies
View Related
Feb 28, 2011
I am trying to figure out what the lights on my Dell ethernet adaptor port mean.
View 1 Replies
View Related
Apr 15, 2012
A few days ago, my lappy crashs (Blue Screen) and when i managed to get the page showing, start windows normal mode, safe mode or last know good config, i select the last known good config, But when i get into the windows, i have these message on my network icon saying limited or no connectivity. I run ipconfig on cmd, and got all
0.0.0.0
i have seen some of the troubleshoot advice on other thread on ipconfig/release, flush and renew but it doesnt works i tried to reinstall my drivers, but still the same, There wasnt any ! on my device manager, and i have selected the internet protocol, IP address and DNS, Automatically but still, it doesnt works
View 1 Replies
View Related
