D-Link DIR-655 :: Suddenly Started Blasting Out Continuous IGMPV2 Membership Broadcasts
Jan 3, 2012
Just this weekend, my DIR-655 has suddenly started blasting out continuous IGMPV2 Membership broadcasts, causing a flood of network traffic that's not normal and is interfering with other traffic. Rebooting everything in the system didn't fix it, turning off the other machines on the network (3 + NAS) didn't fix it, and I couldn't find anything in the configuration of the DIR-655 to stop it.
View 3 Replies
ADVERTISEMENT
Sep 2, 2011
When there's more than the usual (3) computers connected to our home network, i suddenly get internet problems which includes continuous disconnections from skype and wow (That's those I've noticed so far).Calling my ISP won't work because they will only say that since it's only my computer then it isn't their fault etc.
View 19 Replies
View Related
Dec 19, 2012
no changes except switched out old steady wrt45g router cabled to different computer for a new (crazy good price) asus n66 dark knight. stable old system after clean install xpsp3 several years ago. abruptly started crashing and endless rebooting any time wusb54g attached. no antivirus active. never had linksys monitor software installed. xp had handled everything well till now. repeated attempts to re-install drivers (rt25000usb) fail. occasionally xp sees "new hardware" and occasionally it simply immediately crashes. attempted install of ?failing? usb54gv4 onto much newer W7 machine to try to test hardware w/o success. linksys AE1000 usb adapter worked on W7 machine and also installed successfully on the old steady XP machine in question.
View 3 Replies
View Related
Feb 28, 2013
I would like to record the camera feed (per 5 min. files) on my server (ubuntu or windows)
I Installed a FTP server and tried the option "always" in the "video clip" section, but unfortunately, it seem not possible to record more than 10 seconds files every 60 seconds . I think that this is a bug ?
Do you know, if we have a possibility to record the camera feed, I would like to manage it from the webcam or with an external program running as a service.
View 7 Replies
View Related
Jan 3, 2011
router started disconnecting clients every few minutes
View 2 Replies
View Related
Mar 10, 2012
I have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.
Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.
View 4 Replies
View Related
Feb 21, 2012
I've had a DIR-600 for years, and this past month it has been really bad. I have a 3mbps Cable connection, always worked fine and fast, but since the start of the month I've been getting, at most, 60kb/s of download speed (I have a wired connection to the router). Speed tests register everything as fine, except for the download speed, which is really unstable and shoots all over the place, going from 1MB/s to 0 in some instances. I thought it was the ISP being bad since we're having a lot of problems with this provider where I work, but got tired of it and decided to do some troubleshooting myself. When I connect directly to the modem, without the router, I get the same fast speeds I used to. I tried rebooting everything, I tried resetting the router to factory defaults, but nothing seemed to change that. DL speed is always below 60KB/s and if something is downloading at that speed, a single page takes a minute to load.
View 3 Replies
View Related
Jan 13, 2011
TWC / Road Runner modem
dir-655 - Hardware Version: B1
Firmware Version: 2.00NA
dap-1522
windows xp
xbox 360
powerphone voip adapter
Here is my setup:
TWC / RR cable modem to 655
655 port to xp machine
655 port to voip adapter
655 wireless to 1522
1522 port to xbox 360
I am no guru but managed to get all this working about 6 months ago. Other than some TWC outages it has been fine.Couple days back the XP stopped seeing the net. It could still see the LAN. The voip adapter and 1522 / xbox 360 still work fine.Here is what I have tried:
Plugged XP in 1522, worked fine.
Plugged XP directly into cable modem, worked fine.
Plugged XP into port the voip is working on, did not work.
Tried other 3 ports on 655, did not work.
Since the XP machine works with the 1522 and cable modem I am assuming the XP machine is not the problem.Since the voip adapter works on the 655 ports I am assuming the ports are not the problem.
View 2 Replies
View Related
Jul 14, 2012
I upgraded to the new FW today 2.07 and everything seemed fine. Then suddenly i lost my internet connection. I can connect through the modem ok. Cables are ok. I am using my desktop with a wired connection. The 'world' light is not on
View 2 Replies
View Related
Jun 7, 2012
I am installing a new Cisco AP1042N access point in our network but the maximum speed it broadcasts is 54Mbit(802.11G) and that should be 300Mbit(802.11N). Im also disappointed about the range. Im using it in a small office building with a few thin walls but when im about 20 meters away from this access point my signal strength is very poor (My €100 HP V-M200 AP does much better in the same environment).
View 4 Replies
View Related
Dec 26, 2011
I have a D-Link DIR-615 Hardware Version: E3 Firmware Version: 5.10 and I am using this as an access point with the DHCP disabled (secondary router) and my primary router is located down stairs and it is also a DIR-615 Hardware Version: B2 (192.168.0.1) and this issue didn�t develop until later over time and I have made absolutely no network configuration or ISP changes at all the internet has been working fine confirmed with Time Warner Cable and for more than six months and I out the DIR-615 Hardware Version: E3 Firmware Version: 5.10 router has been bringing down the entire network/internet access and I can confirm this router is causing the network/internet to go down and windows notification will say the network only has limited access and I am also unable to access the router page (192.168.0.2) state I have to remove it and restart it D-Link can take a look into this issue I believe this might be a bug and I confirmed on the website that this is the latest version.
View 15 Replies
View Related
Dec 6, 2011
I have a Dlink Dir-615 router and a Motorola SB6120 Modem. For some reason the router suddenly says it's receiving internet access from the modem. It has worked for several months beforehand. I tried another Dlink modem and got the same results. I have my computer hooked directly to the modem hence the ability to make this post.
View 5 Replies
View Related
Apr 15, 2011
I have a DIR-825 (B) for over a year now. This morning, the wireless on it suddenly stopped working. Meaning, all my machines not longer seeing the signal from that router. If I hardwire to it, it will work fine. I have check the wireless settings and they all look fine.
View 2 Replies
View Related
Oct 2, 2011
I've been using my DCS-930L happily for the last month. Today, it suddenly stopped working. I haven't made any changes to my network or any configurations in about 2 weeks, during which the camera has worked fine locally as well as remotely. Now, if I unplug/plug it back in, the camera will immediately connect. However, after a period of time, it's no longer accessible, even from my local network. When I try to log-in to the camera or view it, it cannot be found or connected to. So it doesn't seem to be any of my configuration, but something that's intermittent or happens after awhile.
View 1 Replies
View Related
Dec 20, 2011
i need to be able to find out what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.
View 7 Replies
View Related
Dec 20, 2011
what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.
View 9 Replies
View Related
Apr 10, 2012
We are using the SG300 series switches, and have come across an issue where we need to block ARP broadcasts based on IP.
we have multiple computers, each with only one ethernet adapter, each adapter has two IPs configured, 10.10.10.x and 192.168.0.100.All machines have the same 192.168.0.100 address (Used for applications/hardware running locally to that machine and this IP cannot be changed).
When the machines are connected to the network, ARP is advertising BOTH the 10.10.10.x address and the 192.168.0.100 address.
As all machines have the same 192 address we receive IP conflict notifications on each machine.
How can the ARP broadcasts for the 192 address range be blocked?
View 1 Replies
View Related
Jan 7, 2013
In troubleshooting another issue I set up another SG300 on the same VLAN as my SG300-28P and then setup a Monitor Port on it to see what Broadcasts I was getting.
Low and behold the SG300-28P is sending out quite a few Broadcast Packets. Most of them are the same, ARP Request for its Default Gateway Address. Others are for a few other AD Servers on our network.
Arp Entry Age Out is set to the default of 600000 with "Normal Age Out" selected. Though in a few minutes of logging Packets, there were almost 7,000 broadcasts from it for the its Gateway Address. The Gateway Address that it has is the IP of a Cisco ASA 5510. Is there some TTY on the ARP entry like DNS?
This is the Wireshark Packet. The Frame check sequence is Bad, what can cause that?
No. Time Source Destination Protocol Length Info 1737 67.457763000 Cisco_a9:93:84 Broadcast ARP 64 Who has 10.1.0.3? Tell 10.1.2.3 [ETHERNET FRAME CHECK SEQUENCE INCORRECT]
Frame 1737: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 Interface id: 0 WTAP_ENCAP: 1 Arrival Time: Jan 8, 2013 14:44:06.952611000 Pacific Standard Time [Time shift for this packet: 0.000000000 seconds] Epoch Time: 1357685046.952611000 seconds [Time delta from previous captured frame: 0.000106000 seconds] [Time delta from previous displayed frame: 0.000106000 seconds] [Time since reference or first frame: 67.457763000 seconds] Frame Number: 1737 Frame Length: 64 bytes (512 bits) Capture Length: 64 bytes (512 bits) [Frame is marked: True] [Frame is ignored: False] [Protocols in frame: eth:arp] [Coloring Rule Name: ARP] [Coloring Rule String: arp]Ethernet II, Src: Cisco_a9:93:84
[code]....
View 6 Replies
View Related
Nov 6, 2012
I have had a setup in which my four DCS-930Ls transfer picture every 15 minutes over a Dovado-router connected to a mobile broadband modem. This has worked perfectly until this last night. No pictures are transferred and upon using the test FTP function the status page just says "Testing ...." forever. I've also tested e-mailing picture without success.
View 2 Replies
View Related
Nov 10, 2011
I have this D-Link DIR-825 and it was working fine till yesterday. All of a sudden it stopped connecting to internet. I restarted it and tried to login to the router but failed. I called the support and did a hard reset of the router. After that when I am not able to connect to the router from my computer for configuring it again. When I connected the Router to my computer via LAN cable sometimes the LAN port is glowing and sometimes it is not. I tried different LAN Cables too. But nothing is working and I am not able to get to the router page.
View 5 Replies
View Related
Sep 4, 2011
Any snmpset commands to modify port vlan membership on SG300-28 switches? I checked [URL] however this information is apparently only valid for catalysts.
The latest firmware is installed and the provided MIB files are used.
View 5 Replies
View Related
May 14, 2012
Basically I want to query Radius for AD group membership and apply a set of Bookmarks based on that group. I would use LDAP, but we have two domains and I need both to be available for login, so I am using ACS 5.3 as a proxy. I saw that using attribute 4242 for DAP for group membership, but what is the Group syntax?
View 1 Replies
View Related
Jun 26, 2012
I can't figure out how to configure a port membership with multiple VLANs. My setup:
- VLAN10
- VLAN20
- port settings tab: port24 in general mode
- ports to VLANs tab: untagged everywhere, when I set port 24 membership to VLAN10 I can't set port 24 membership in VLAN20 because when I do that port 24 membership in VLAN10 dissapears and vice versa
- but I can set port 24 membership to both VLANs in VLANs to port tab, but I think it doesn't work because:
- when I connect hosts to ports 23 (port 23 is a member of VLAN10 only) and 24 (member of VLAN10 and VLAN20)
there are not any connectivity between them
- but connectivity is working when I set the same PVID for both ports 23 and 24 in port setting tab, I can't set multiple PVID in here.
So, is it possible to configure port membership for multiple VLANs on this linksys. [URL]
View 1 Replies
View Related
Aug 31, 2012
I have two Cisco SG300-20 switches. Both of them are configured in L3 mode. They have several VLAN's configured.
When I reboot my switches some VLAN membership settings are lost! I have already saved the settings over and over before rebooting, and even tried to save it to the backup memory and so on. Say for example I have changed port 9 to 14 from VLAN 101 to VLAN 105. I save the configuration, reboot the switch. And then the changes are lost. This is a big problem, because servers and my iSCSI network loose connectivity. They already have the latest firmware. This issue was there three firmwares before.
This issue pop-ups when I have a power loss, or I need to reboot/shutdown them manually. It may be off-topic but I also have the feeling that the performance of the switches goes down during uptime. A reboot solves the performance issue. I don't have a performance benchmark, but I can notice it on the performance transfer rate between clients and servers.
View 4 Replies
View Related
Feb 14, 2013
Until yesterday my various equipment was networking to each other and the internet without a problem. After i reset my d-link DSL-2640B router (would this initiate an update?) my x-box would not connect to the internet, There is no problem connecting to the router and the home network. Everything is talking to each other and everything else is connected to the internet including the TV. The router must just be blocking the x-box and only from yesterday. I checked ports that are talked about and i think i set up port triggering, but then noticed the firewall is disabled anyway.
View 10 Replies
View Related
Apr 21, 2013
Region : Others
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version :
ISP :
after year and a half of using TL-WR741 ND router, it suddenly stop working during the night. I have no problems with router before this happened (I think only one or two reset in 1 year and 6 months). System led light does not flash (some sytem error) and I can't access to 192.168.1.1 router setup site. I tried almost everything, unplug power, reset etc. for almost 100 times, reconnect the router with modem and PC in all posible ways, but still can't establish connection or even access to router's setup. Obviusly internet works fine?
View 3 Replies
View Related
Nov 28, 2012
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120213 Rel.30335
ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
View 1 Replies
View Related
May 13, 2013
Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro
Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address
View 1 Replies
View Related
Dec 14, 2011
I have a dir-655 xtreme N gigabit router with 2.03NA version firmware. The wireless signal will suddenly and randomly disappear from my laptop. I checked the properties of the network connected it remains on the same channel when it reconnects so I figure it's not a channel issue.I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from stopping.
Computer: dell inspiron 6400
OS: windows XP pro (sp3)
ISP service: DSL
Modem: stand alone (Sagemcom 4300)
Router: dlink / xtremeN gigabit router / dir655
Set for mixed g, n and b wireless mode
Security: wpa-personnal / TKIP
Firmware: version 2.03NA
View 14 Replies
View Related
Feb 22, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Charter 20Mb
I've had the router for 3+ months, and was very happy until about a week ago. Since then, it's started doing what many others here have reported: freezing where it's impossible even to access the web interface, requiring a reboot. When this happens, router's SYS and WLAN lights both freeze (either on or off, seems to be random wherever they are at the instant). The other lights continue to flicker. Freezes occur anywhere from half an hour to several hours apart.Network includes three ethernet wired devices (1 computer, 2 Ooma VOIP adapters), 1 TB NTFS hard drive via USB (music storage), 4 wi-fi devices (1 computer, 1 network streamer, 1 printer, 1 Roku streamer).Use the router extensively to stream music from the USB-connected hard drive, but the freezes also happen when not streaming.Have already done a factory reset of the router. Currently running plain vanilla installation except for enabling security settings and the USB drive, and it's still happening.
View 3 Replies
View Related
Nov 8, 2012
I cant find the v LAN-membership command on my 3700 layer 3 switch, I've searched Google on whether the command has upgraded to a new syntax to no avail, I'm using GNS3 and the IOS is c3725-adventerprisek9-mz.124-25d.bin
View 4 Replies
View Related
May 17, 2013
ARP broadcasts not reaching all VLAN ports on 3550
Cisco 3550, interface Vlan9
ip address 1.1.1.1 255.255.255.240 secondary
ip address 3.3.3.3 255.255.255.240
[Code].....
View 5 Replies
View Related
Jan 6, 2011
My customer requires the hostport on an access switch to be allocated to a specific Vlan based upon the AD Group that the user is a memeber of ? I am planning to setup NAC in a Real Gateway OOB deployment, using an ACS 5.2. I was initially thinking that the initial authentication server would be the ACS and then the AD, which using group mappings within the AD, I could then assign the user to a specific ACS group and then pass a Radius attribute back to the NAC manager for processing?
View 2 Replies
View Related
