D-Link DCS-930L :: Suddenly Stops Connecting After A While?
Oct 2, 2011
I've been using my DCS-930L happily for the last month. Today, it suddenly stopped working. I haven't made any changes to my network or any configurations in about 2 weeks, during which the camera has worked fine locally as well as remotely. Now, if I unplug/plug it back in, the camera will immediately connect. However, after a period of time, it's no longer accessible, even from my local network. When I try to log-in to the camera or view it, it cannot be found or connected to. So it doesn't seem to be any of my configuration, but something that's intermittent or happens after awhile.
View 1 Replies
ADVERTISEMENT
Nov 6, 2012
I have had a setup in which my four DCS-930Ls transfer picture every 15 minutes over a Dovado-router connected to a mobile broadband modem. This has worked perfectly until this last night. No pictures are transferred and upon using the test FTP function the status page just says "Testing ...." forever. I've also tested e-mailing picture without success.
View 2 Replies
View Related
Nov 18, 2011
just bought DCS-930L few days ago, the manual sounds so easy (but it's hard than it looks) i stuck on the setting-up, here is my problem: unable to connect to mydlink web site and there was a problem saving my settings. seems like internet connecting problem, the software just couldn't connect to internet.i have already registered, i got my device number and it couldn't be find in my device on mydlink.
View 5 Replies
View Related
Feb 16, 2013
I would like my dcs-930l ip camera to be directly connected to my d-link dsl-321b modem (which has only one rj45 port to connect to), so that I can either access the cam via the internet (watching livestream through webinterface, that would be option 1) or so that the cam sends an email with a picture as soon as the motion sensors activate - that would be option 2 (by the way: the modem / cam get internet access through german telekom / t-online).
I have tried to get option 1 as well as option 2 to work, but I failed... I would be happy if either option 1 or 2 would work for me - I don't really care which one. In both cases, the problem seems to be that the dcs-930l cam cannot access the internet (but the cam itself works - I can view the livestream through the local network).
View 1 Replies
View Related
Sep 17, 2012
I'm trying to connect the D-Link 930L Wireless N Camera to my E4200 router. When I have the camera connected via the Ethernet cable it works fine, as soon as I unplug the Ethernet cable it will not connect wirelessly. I tested the camera on a friends router E3000 and the camera connects fine and work flawlessly on his network wirelessly. Any settings in the router that need to changed or set differently?? All of my other devices work great. I have been through D-Links Tech support all things point back to my router.
View 6 Replies
View Related
Feb 11, 2012
My DIR-601 stops connecting to the internet so I have to power cycle the router daily, the 2.00 FW is not posted on the DLink Website. I don't have this problem with my Linksys router. E-mailing DLink doesn't facilitate since they tell me to call, and I don't want to sit through menus and scripts. Hardware rev is B1. Connection fails on both wired and wireless.Also, as a side item, D-Link should ignore MAC filter for wired connections.
View 14 Replies
View Related
May 13, 2013
Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro
Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address
View 1 Replies
View Related
Mar 29, 2011
I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7. Configuration of camera is as recommended in manual with CAT-5 cable. Green light blinks irregularly in a communicating-with-router manner. The setup utility won't recognize the camera
View 1 Replies
View Related
May 3, 2011
I think the built-in wi-fi of my laptop was destroyed so I connected a usb device that enables me to use wi-fi. Now, I tried to use internet, I was connected however connection was slow plus after a few minutes when I open another window it won't just connect. The window shows a blank page and on the tab it says untitled. I don't know what's the problem and what should I do to fix it.
View 2 Replies
View Related
Mar 6, 2012
I am having a very strange issue on LMS 3.2
The problem is that the syslog collection suddently stops receiving logs and writing them into the syslog.log file
I have checked the following:
- Packet sniff to make sure that logs are being received on the server's NIC interface
- Checked the UDP port 514 is bound to the crmlog process.
- Checked the crmlog is running.
When i restart the server, the syslog connections works for a week or two and save the received logs in the syslog.log file, but after that it suddenly stops collecting log again, all the above points stays valid (service running, UDP Port...)
I have attached the LMS's modules versions installed on the server.
View 1 Replies
View Related
Apr 29, 2013
My internet connection suddenly stops for about 30 minutes of using it. I need to restart so that I can connect again.
View 1 Replies
View Related
Jul 30, 2012
A few days ago, my Linksys E3200 router stopped working suddenly for no reason. The SSID was still broadcasted for a few days, but no internet connection. Today the SSID does not broadcast at all and I seemingly have no access to it.I tried power cycling it.I tried reconfiguring it via the CD included in the box.I tried solving it with the wireless tools in Windows.
View 2 Replies
View Related
Aug 28, 2012
I have a dell studio 1558 laptop and it's got this Bluetooth problem. I use BT to connect to Internet through my phone as a modem. But sometimes it suddenly stops working and the BT icon vanishes from the taskbar. Every attempt to restart it by Wireless switch, or by restarting BT service/process fails. (this does not happen with WiFi, or any other connection though). The only way I get back Bluetooth ON again is if I put the system to sleep, or I shut down and Turn On (Hibernate, Restart, Log off doesn't work). And this happens more frequently while multitasking than normal use.
I am using Windows 7 Home premium (service pack 0).I have the latest Bluetooth module installed, latest system BIOS installed as available in the dell website.
View 1 Replies
View Related
Oct 30, 2012
Right now I have my computer (iMac early 2012 summer purchase) plugged directly into the wall via ethernet cable for internet access. I have only begun doing this in the past week because my E1200 wireless router has stopped working properly. I have reinstalled and reset to factory settings and set up with Cisco Connect and setup manually over the past week troubleshooting every possible way I have ever known how. My internet, obviously, is working. And when I set up the wireless network it connects properly and obtains an IP address and the lights on the back of the unit light up correspondingly and correct. But I cannot connect to the internet via the router, wirelessly or plugged directly into it. Yet when I take the internet cable and plug it straight into my computer it works.Mainly just need to know if this can be fixed or if I need to go return this unit and get a replacement. The router was purchased two months ago and has not had any issues since I first set it up until a couple of weeks ago and my phone is using up all of my cellular data plan without being connected to my wi-fi...
View 1 Replies
View Related
Feb 25, 2010
I have a Studio 1557 laptop (purchased in late December 2009) that all of a sudden has lost wireless connection to the internet. Went to use it last night (Thursday) for normal use and no wireless connection at all. Before this issue, there were no problems connecting thru wireless at all...in fact used it Wednesday evening for work/surfing and no problems whatsoever. We are using a Linksys 160N router...have 2 other computers and 2 iPod Touches that are connecting just fine, absolutely no problems. It can connect thru a wired connection with no problems but nothing thru wireless...this is a fairly new router, about 10 days old, but haven't had any issues with it since set-up.
I didn't have much of a chance to do anything about this last night or this morning. I really don't want to bother calling Dell Support either.
Dell Studio 1557 Windows 7 64-bit, 8gb 1066Mhz, 320HD
View 6 Replies
View Related
Sep 14, 2012
We are having issues with our Cisco ACE 4710, it suddenly stopped to telnet admin context.We are able to telnet another context from the same appliance, but unable to telnet the admin context. Is possible to pings the gateways from the other contexts, but we are not able to ping the gateway from the admin context.Actual we have 5 context with the minimum allocation is 10%.ACL and policy map allowing telnet and etc are enable and configured on the interface.
View 1 Replies
View Related
Apr 10, 2011
For whatever reason, as of Tuesday afternoon my laptop can no longer connect to wired internet. I am a college student (NYU), so I cannot access a modem or router myself. I have tried:
-Plugging my cord into another jack in my dorm room
-Using my roommate's ethernet cord
-Taking my cord and laptop to different areas on campus (library, other dorms, etc) that use different wired networks, and attempted connection there Worth noting is that I can still connect to wireless internet just fine (however, my dorm does not have wireless, making things very difficult for me).My ethernet adapter is a Realtek PCIe GBE Family Controller. It was just updated today, in hopes that maybe it was a driver issue (Prior, it was a Realtek 8168C/8111C, whatever that means). All drivers have green checks next to them and appear to be working. Here is my IPConfig info:
Description : Realtek PCIe GBE Family Controller
Physical Address : 00-1E-EC-55-91-1F
DHCP Enabled : Yes
Autoconfiguration Enabled : Yes
Autoconfiguration IP Address : 169.254.26.193
Subnet Mask : 255.255.0.0
Default Gateway : (blank)
I am running Windows XP Service Pack 3. My laptop is a custom-built CyberPower PC. I have done a Malwarebytes Scan,SuperAntiSpyware Scan, and Avast Anti-Virus scan, and have turned up no malware or viruses.
View 2 Replies
View Related
Jan 30, 2012
my net is connecting so late after a sudden hang in windows, and sometimes showing Error 718..It has become very often...I asked my friends (same connection), they are not having any problem from the ISP... what's wrong? :/ Few minutes ago, it was showing error 718, i had to restart, and then it connected (still slowly).
Core2Duo, Dg41Rq, @2.93Ghz, 2Gb DDR2, 500Gb HD, avast free, Ethernet connection braodband PPPoE via landline.
View 1 Replies
View Related
Jan 20, 2011
I've got this router for 3 days, I configured it for Polish neostrada (TPSA), its works perfect for 3 days (until today morning). Now i cannot connect to ADSL, on info page its everything correctly. I only cannot connect (after pressing Connect page reload and nothing changed). My orgiginal Livebox from provider works (it have build in settings). I tried to reflash firmware and restore to factory settings (i tried too wizzard from CD and simple writing on info page).Wi-Fi + Ethernet works, I only cannot conect to ADSL (i tried PPPoA and PPPoE, all settings what my provider has on his page).
View 1 Replies
View Related
Jul 5, 2011
Well, I have a WRT120N Router for 11 months to now. I never had a problem with the Router, but since 2 days ago, It didnt connect to the internet.
My network is: Internet > Cable Modem > WRT120N > Computers
As I said, the problem is that the Router doesnt has Internet Connection.
Things to take in consideration: The Cable MODEM ISN'T the problem Because if i connect the modem directly to a computer, I have Internet connection without problems.I Diconnected and Connected both Modem and Router in several ways and several times, and it doesnt work.I also tryed clonning my PCs MAC address to the Router and it was the same.The Router Indeed receives the External IP Address from the Modem, and also, it changes if i restart the modem (as my ISP IP is DHCP). But there is NO internet conection.The Router had the 1.0.05 Firmware, and i upgraded to 1.0.06, and the problem persists. Another thing to take in account is that if I turn off my modem and the I turn it On, sometimes, the router receives Internet connection, but in matter of Seconds (minutes as much), the internet connection falls.
This is NOT an ISP problem, because as I said, if I connect the Modem Directly to any PC, i have a perfectly normal Internet Connection, And also, I called my ISP and they Said me that there werent any problem on their network.
I have also tryed with the "Router Dianostics" (the Ping and Traceroute options that are in the Router's Webend and also, no conection. So its NOT a Cables problem.
View 1 Replies
View Related
Jan 24, 2013
I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.I also had a word with my internet provider...he's kept the MAC open (or something like that) so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..
View 2 Replies
View Related
Aug 17, 2012
I have a Philco PHN 15006. My drivers should be up to date. Since I've started using it, I noticed I lose connection with internet and then I have to restart the switch/router. Then, it starts working again. I used to have to just open the Solve Problems and then it would connect again. But now, I tried just unplugging the Ethernet Cable and plugging it again. It had the same effect as restarting the switch. So, the problem must be in the notebook.The wireless internet is worse, because it connects for a while then stops connecting, while my other computer connects with no problems.
View 12 Replies
View Related
Mar 21, 2011
I would like to share my live video from my dcs-930L camera but don't want to give out my password that would allow people to change settings..
View 3 Replies
View Related
May 5, 2011
i was playing back the recording,when i skipped ahead, the sound disappeared. I am recording 10 hours worth everyday, most of the time i just need to skip to a certain time to see and hear what was going on,
View 2 Replies
View Related
Feb 12, 2013
How to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?
View 3 Replies
View Related
Aug 31, 2012
I just brought this D-Link DCS-930L. I insert the disc and follow the instruction and select the option of without WPS and follow the step of connecting the lan cable and power point but at Step 2, after the green light, it keep prompting me that it can't find the camera. it connected to the router where there is a lan cable connected to my pc.
View 1 Replies
View Related
May 12, 2011
I had to get a new router from verizon cause the old one died. so i reset the camera and wipe all the dlink software and settings. I then start fresh. i get all the way to choosing wireless and input the password. It states that there is a problem saving your settings. I tells me nothing more. I spent 4 hours on the phone with tech support and i can get it working through wired but I can't put it in my childs room wired. it worked perfectly before the router switch. funny thing is that its the same brand and model router.
View 4 Replies
View Related
May 6, 2011
I downloaded the MAC setup Utility(BETA) and it can't find the camera.The camera is connected via Ethernet-Light on the front under the lens is green (blinks sometimes)First thing I noticed wrong was the setup utility asks if the light on the side of the camera is lit green-there's no light on the side of the camera as far as I can tell. I tried unplugging the camera and hitting the reset button on the back-nothing works.
PC: MAC OSX 10.6.7 (2.2GHz Intel Core 2 Duo/4GB RAM)
Router: Linksys WRT54G Wireless-G Broadband 2.4GHz
Browser: FireFox 4.0.1
View 3 Replies
View Related
Nov 27, 2011
i installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure
View 1 Replies
View Related
Apr 7, 2011
I just recently purchased the DCS-930L wireless camera, and I am trying to connect it to my Netgear router but it states that there's an error and can't connect. My itouch and laptop connects fine with the router.
View 6 Replies
View Related
Dec 8, 2011
Is it possible to install the D Viewcam software on a PC that is offsite (different network) as the camera and record from there? Basically the camera is home and you record from work.Can I record directly to any NAS (same network as camera) without having a PC in the middle? Or do I need a specific NAS?What about one of those external hard drives that hook up directly to a router?
View 1 Replies
View Related
Jan 22, 2012
I have the DCS-930L set up at home with motion detection emails. I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?
View 6 Replies
View Related
Jun 10, 2012
I am able to access 930L (2 cams) from wifi be it laptop,iphone or ipad but I am not able to see it through 3g.I have Huawei fibre optics broadband reuter from Starhub.Starhub is running away if ask them to fix it. Huawei never takes the call.I tried atleast 3 times 10 minutes each at 8006011450.It goes to disconnect. The lot talked about UPNP is enable in reuter but it does not work.
Now i talked to Dlink support with ticket DCX36811.They advised to load the firmware.I did it still the connection timeout is there. we have baby to monitor through iphone/android 3g.
View 2 Replies
View Related
