D-Link DIR-601 :: Stops Connecting To Internet
Feb 11, 2012
My DIR-601 stops connecting to the internet so I have to power cycle the router daily, the 2.00 FW is not posted on the DLink Website. I don't have this problem with my Linksys router. E-mailing DLink doesn't facilitate since they tell me to call, and I don't want to sit through menus and scripts. Hardware rev is B1. Connection fails on both wired and wireless.Also, as a side item, D-Link should ignore MAC filter for wired connections.
View 14 Replies
ADVERTISEMENT
Oct 2, 2011
I've been using my DCS-930L happily for the last month. Today, it suddenly stopped working. I haven't made any changes to my network or any configurations in about 2 weeks, during which the camera has worked fine locally as well as remotely. Now, if I unplug/plug it back in, the camera will immediately connect. However, after a period of time, it's no longer accessible, even from my local network. When I try to log-in to the camera or view it, it cannot be found or connected to. So it doesn't seem to be any of my configuration, but something that's intermittent or happens after awhile.
View 1 Replies
View Related
Aug 17, 2012
I have a Philco PHN 15006. My drivers should be up to date. Since I've started using it, I noticed I lose connection with internet and then I have to restart the switch/router. Then, it starts working again. I used to have to just open the Solve Problems and then it would connect again. But now, I tried just unplugging the Ethernet Cable and plugging it again. It had the same effect as restarting the switch. So, the problem must be in the notebook.The wireless internet is worse, because it connects for a while then stops connecting, while my other computer connects with no problems.
View 12 Replies
View Related
Mar 10, 2012
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
BTW It's the REV_B with the 2.07 firmware.
View 2 Replies
View Related
May 8, 2012
If set the LAN to 1000 duplex I get better throughput than If I set it to Auto 100/1000,but the problem is that then my internet modem stops working,is there a solution to this ?
View 11 Replies
View Related
Jul 29, 2011
As of two days ago my DIR-655 seems to have stopped loading webpages every 10-30minutes for periods of up to 5-15 minutes, as in they the reloading icon will constantly be circling and the webpage remains blank, no error or anything until it says failed to load on my web browser (tried multiple browsers such as Safari, Chrome, IE and Firefox). This problem occurs on every computer on my network, laptops (both Mac and PC) and desktops. When this problem occurs all lights on modem and router seem to be normal no signs of anything going down but I originally thought that this affected wired and wireless but I seem to have narrowed it to culprit being the wireless. When connected to the PC I can browse for an indefinite amount of time without the webpages failing to respond, however when I connected to WiFi through Airport on a Macbook Air my webpages start to begin failing to load around 5-10 minutes of browsing which affects all computers connected to the network (essentially all computers failing to respond to the internet during this outage).
Interestingly when this problem occurs, if I am connected to Skype or Aim it will stay connected and I can still chat with people but I will not be able to sign onto AIM if the problem occurs before I sign on and I try to sign on during the outage. If I am streaming a video from justin.tv or ustream it still continues to stream during this "outage".I have the revB of the DIR-655 and have tried resetting the modem, turning off the firewall, upgrading firmware to 2.03NA from 2.01NA and setting the MTU to 1400 (default 1500) with nothing working. I am using Time Warner Wideband ISP and have connected the modem directly to my PC and for the 30minutes or so that I tested the web browsing it seemed fine and did not have any errors.
View 14 Replies
View Related
Jan 30, 2011
I've been testing it out at home where I use another D-Link with no problem. What I'm seeing is that I can connect to the router (wired or wireless) but no internet connection is reported. I believe I have also tried pinging a web site by IP address alone with no luck.
ISP: Version DSL
Router: DIR-615,
Hardware version B2
Firmware version: 2.20
I've tried turning modem and router off, waiting a few minutes, then turning on modem and letting it connect then turning on the router. That doesn't work. As best I can tell the two routers have the same settings. The ISP is using Dynamic IP (DHCP) connection.
View 7 Replies
View Related
Apr 5, 2011
I upgraded the firmware everything was fine. This may not be realted to the firmware. I can now connect to the Router but cannot get any Internet or data to transmit wireless. Plug in directly it works fine.
View 14 Replies
View Related
Jan 17, 2012
I am trying to get neighbour wireless router working. He has a D-Link DIR-615 Wireless N 300 Router. I have gotten the router working by manually putting in his PPPoE settings. Now with a wired XP SP3 computer connected via Ethernet, it can access the internet. We then configured his router for WPA2 with AES encryption. We were able to connect up his phone which can handle a WiFi connection. He was able to surf the web using the WPA2 passphrase. So far, so good. The last bit was the upstairs computer which has a PCI D-Link wireless N card in it. That computer runs XP SP2 and we have not been able to get it to connect to the internet.We have tried both Windows networking, and the D-Link Wireless management software. We were unable to get WPA2 working, so we tried WPA, WEP, and finally no security. In each case, we can get the computer to connect to the router by putting in the passphrase (except when no security), and the status changes to Connected. But then browsers are not able to open any internet site.
I have checked the ipconfig settings, they seem to be correct. DHCP is providing the computer with a valid local IP (192.168.0.102), and the gateway is correctly listing the D-Link router.Subnet mask is 255.255.255.0. The downstairs Ethernet connected computer has an IP of 192.168.0.100, so they are on the same subnet.We have tried turning "Windows Wireless Zero Configuration" service off, and also tried with it on.We have switched between using the D-Link client and allowing Windows to manage wireless settings. It finds the wireless network, and connects with the passphrase with a good strong signal, but internet persists in not working.I do not have MAC Filtering turned on.I have turned off the Windows Firewall on the wireless computer. What else am I missing?
View 11 Replies
View Related
Aug 12, 2011
My computer is almost always on. My modem and router are always on.Last night I was using the internet, no problems.This morning I woke up to find "No Internet Access".My computer was connecting to the router just fine, but the router was showing a orange Earth symbol on the front (not green).I connected the computer directly to the modem and internet works just fine. After powering off both the modem and router and checking all the connections ... still the router is not "reading" the internet from the modem. And still the internet is there if I connect the modem directly to the computer (that's how I am online and posting this right now).
View 1 Replies
View Related
Jun 19, 2011
Had this router for few months working fine, than the modem was slow for our house so we got a new modem called Actiontec Model#GT701D. And we did the Set up but the Internet doesn't work anymore. If we connect the modem to Pc, it works but connecting modem to router it doesn't receive Internet. Another problem wad that for the DIR655 to work we needed to connect another router before DIR655 connected to modem, so we needed to have an extra router to get the DIR655 to work.
View 1 Replies
View Related
Dec 29, 2012
I am having problems with a customer's ASA 5505 with Anyconnect 3.1 - it is generating captive portal false-alerts which are stopping users from connecting. This issue began when I upgraded from Anyconnect 2.4 to 3.1, and it appears like this: A user downloads and installs the Anyconnect client and is able to connect fine, to begin with. However, once they reboot their computer and try to reconnect, the VPN session will not come up and they receive the error message below."The service provider in your current location is restricting access to the internet. You need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."
Reading other posts, it seems this message appears when a captive portal is restricting internet access. It must be a false alert in this case as there is nothing of the sort here. Apparently, Anyconnect 3.1 can generate a false alert like so if the name of the firewall's SSL certificate doesn't match the CName listed on the Client Profile. I've set this up to match, to no avail. Although users can connect by reauthenticating through the SSL VPN login web page, I am stumped as to how to get rid of this captive portal error that pops up when they try to use the Anyconnect client.
View 4 Replies
View Related
Dec 21, 2011
Background: This weekend, I lost my internet connection at home. I called my ISP and they sent someone over. The guy rewired the entire house (our ISP is also our tv cable provider), because he felt that our signal was probably weak due to the wiring. Long story short, after two hours of rewiring and fixing the cable outside out house (chewed through by a squirrel), he said the modem's signal was back to normal and left.
When I plugged the router; however, it refused to hold the internet connection for more than a few seconds. On the front panel, the planet-shaped light turned orange, then blue (for a few seconds) and then turned off entirely. I tried another few times and got the same result. At best, it stayed connected for a minute, until I rebooted my computer. The laptops in our house do read the presence of the router, so it's safe to assume that the problem lies with the router's capacity to receive the signal.
View 5 Replies
View Related
Jun 25, 2011
I just bought a D-Link DIR-615 N300 wireless router to use for printing between my laptop and HP4500 wireless printer. During setup using Verizon Mobile USB 760 modem for internet connection---it's not working--? Or is the only way to utilize is to have a DSL or Cable modem?
View 1 Replies
View Related
Apr 12, 2013
I own a laptop and a desktop, and I use my DIR-600 to connect them both to the internet, using a PPPoE connection. After "repairing" the Desktop (by booting via Windows XP CD) my PC just stopped connecting to the internet. I had rested the router, then configuring it again. Still same issue. Wireless works perfectly. Direct connection.
View 3 Replies
View Related
Oct 19, 2011
So i have set up my Dir-615 router and it worked for about a week perfectly. Then one day i was able to connect to the router, but it says that there is no internet connection. This is untrue since i am able to connect to the internet if i unplug from its WAN port and put it straight into my laptop.
View 8 Replies
View Related
Apr 26, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
I own a TL-WR1043ND. Until recently it has been working like clock work but after a power cut it seems to have lost its settings. Currently there is a WiFi network: both my iMac and my MacBook Pro manage to create a network between them and i can access / transfer files from one to the other without any problems what so ever. My Gmail app on my iPhone also updates emails on this same network. But when i try to browse the web on both Safari or Firefox or check my email on Mail (OSX email client) I am not being allowed to do so. Its as though there is not internet connection. The same thing is happening to my wife when she is using her Nexus 7.
Unfortunately i have lost my DVD with the setup files and I am there for not managing to access the settings of the router. I have tried searching the web to find the downloadable software but it turns out the only ones that i found are for Windows only.The only way to access the web and update my emails etc is when i connect to the modem via Ethernet cable.
View 1 Replies
View Related
Nov 18, 2011
just bought DCS-930L few days ago, the manual sounds so easy (but it's hard than it looks) i stuck on the setting-up, here is my problem: unable to connect to mydlink web site and there was a problem saving my settings. seems like internet connecting problem, the software just couldn't connect to internet.i have already registered, i got my device number and it couldn't be find in my device on mydlink.
View 5 Replies
View Related
Dec 12, 2012
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
View 1 Replies
View Related
May 13, 2013
Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro
Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address
View 1 Replies
View Related
Mar 22, 2012
Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies
View Related
Oct 1, 2011
i have 2 DIR 615 routers which both stop broadcasting SSIDS. Ive had only one connected at a time, thinking it was a bad router, but both behave the same way. Is this a known issue or something ? What happens is, after some time (it varies..sometimes 3hours..sometimes longer), the router stops broadcasting the ssid, and I can no longer connect any of my wireless devices to it. The hardwired connection does work (I have a server connected to it, and it appears to work).The only settings I have changed is my SSID name, and wpa2 password. I've set up one virtual server to port forward requests to the server. Thats it. Nothing complex or anything. And both routers behave the exact same way, meaing they stop broadcasting the SSID.
View 8 Replies
View Related
Mar 9, 2012
I have a D-Link N 300 Gigabit Router. It's only allowing me to download like 30 MB at a time. If I bypass the router, the internet works just fine.How do I fix that?
View 1 Replies
View Related
Dec 4, 2011
I'm using a dlink network adapter (6 months old) on my pc, have always gotten an excellent signal. Main pc in house is hooked up to dir-615 router & works fine. I had some bsod's recently & decided to reformat xp. Loaded the driver for the adapter, got an excellent signal, but couldn't access the net. The signal shows 4 green bars for about 20 seconds, then all white bars for a few seconds, then back to green. It keeps dropping the signal over & over. The network card shows its working properly.
I did an ipconfig, and it says "media state disconnected" & shows no addresses. If the dlink adapter is faulty then i'm assuming it wouldn't work in the first place. I'm thinking its some setting not right in the pc. The reformat went fine, loaded all the drivers in the right order. I only have IE for a browser which i need to access the net with to load firefox & all other programs plus service pack 3 & other xp updates back on with.
When I loaded the driver for the dlink adapter, i used a different workgroup/name than the network name originally used to set up the dlink router if that means anything. I've read about resetting the winsock which i'm going to try, but I would think that wouldn't be it since i just reformatted the pc.
View 1 Replies
View Related
Jun 20, 2011
I bought a DIR-655 (F/W v. 2.00NA) about 6 months ago. It worked well until a couple of weeks ago. Then it started to stop broadcasting WIFI signal without apparent reason. When it did so, I could still connect to it and internet with wired connection, but the WIFI scan does not show my SSID. If I reboot it (either through the admin interface, or just disconnect and reconnect the power), I would be able to reconnect to WIFI, but then WIFI will stop working again in about 8-10 hours. I am rebooting this thing 2-3 times a days and it is very frustrating. Curiously, I borrowed a N300 router to try out
View 10 Replies
View Related
Mar 30, 2011
I just bought a dlink 655 from amazon and for some reason the router stops broadcasting on wifi. I cannot connect to it through my laptop or ps3. The only thing that fixes this is removing the plug from the back of it and putting it back in, once i do this, the SSID shows up once again and all is well until the next day (or 2 days after)
View 2 Replies
View Related
Feb 19, 2011
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies
View Related
Nov 11, 2012
There were 6 computers on the 2.4GHz band, and 2 on the 5GHz.Everytime the people on the 2.4GHz band would get disconnected for no reason, but this router should be able to handle that number easily. After lots of fiddling, like telling people to shut down their phones WiFi, I finally found the culprit:
N and G mixed mode
Even with only Wireless-N devices there would be problems. N-only mode worked well.That is unpractical for me as there are some devices here that are still on Wireless-G, like game consoles and some phones.
View 14 Replies
View Related
Dec 13, 2011
I have two DIR-655s. One is my main router, connected to my modem. The other, on the other side of the house, is set up as an access point. I followed this guide to set up my AP: [URL]
Both are are hard wired. I have both of them using the same SSID. Both are 802.11g only, have the same security mode, and key. The only wireless difference is the channel. One uses 6, while the other uses 11.
On initial setup, everything is fine, but after a few hours, the AP just seems to stop broadcasting a signal. I'm using "Wifi Analyzer" on Android to monitor it. When I look at the AP, the wifi indicator light is still on. If I log into it, change the channel, and press save on the "Wireless Settings" screen, it will broadcast for a few more hours before stopping again. The wired connect of this AP always seems to work (Xbox is hard wired to it).
AP Hardware Version: B1 / Firmware Version: 2.03NA
View 14 Replies
View Related
Jun 20, 2011
I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
View 4 Replies
View Related
Sep 29, 2012
I have been using a TP-Link WR1043-ND for a while now. It is configured as a dumb switch with DHCP disabled. Every other day or so, the device stops taking connections and I cannot access via the IP address. A simple power toggle resets everything immediately. Through this, the LAN connected devices never lose connectivity, I simply am not able to connect wirelessly or access the router via web browser.The only device I connect to the wifi is my phone, so it may actually be more frequently and I do not notice due to my low utilization (and I have 3G so I don't always notice right away if I'm connected). I have a WDTV Live SMP connected to one of the LAN ports and that functions non-stop regardless of the wifi. When the wifi is "down", my phone can see the network and attempts to connect. Sometimes it times out, other times I am repeatedly prompted that the password is incorrect, even though I am POSITIVE that I am entering it correctly. Once I toggle power on the router, the phone connects fine with the stored password.
I have updated to the latest firmware (about a month or so ago): Version: 3.13.12 Build 120405 Rel.33996n My hardware version is: WR1043ND v1 00000000 The router is connected (via LAN port 1) to a wall drop. My upstairs roomate maintains the gig switch and modem, as well as handling the network admin. I simply am using the router as a switch to provide extra ports and broadcast the network over wifi in my apartment.All that said: I need troubleshooting this router and it's configuration before I consider buying a more expensive replacement (and if I go this route, I might add a small switch as well to give me more than 4 LAN ports to work with). I am also considering flashing to DD-WRT before replacing as well to see if that makes a difference in reliability and uptime.
View 2 Replies
View Related
Mar 30, 2011
My router is running the stock 1.21 firmware and it has been fine for almost a year before the wireless suddenly stopped working. I reset the router and restored my previous configuration. After the reboot, the SSID is visible and I can connect to it but there is no internet connection. Also the router becomes unresponsive, i.e. timeout trying to access the router configuration page. After trying out different settings it seems that enabling WPA2+AES is the cause.In the mean time, I am running an open wireless network and everything seems fine. Is the hardware faulty? I am reluctant to update the firmware because of a negative experience with another router (same model).
View 2 Replies
View Related
Mar 29, 2013
Every so ofter, the switch of the router just stops moving traffic between the LAN and to/from internet, though the WiFi keeps working and can still use internet.
I can still use the router's switch, and ping other computers on the local LAN, what happens is that the router stop routing wired traffic from/to internet, the rest of the issue is still the same, I opened reddit on my smartphone and there it was working via WiFi, but the would have none of it for the computers on wired LAN, not even accessing the router's page or telnet.
It is like some service or bridge between the switch LAN and the router itself dies... I'm still clueless.
The only "pattern" that I see is that my desktop is on line, because I can be not at home for 12+ HS and I can connect remotely to the server (rd p and trans droid) so I know it has internet access, but sometimes I think this happens when I turn on my desktop, like just now, this morning, but again, I feel is not every morning, trying to be more scientific about it I come here after every time it happens to record it, and also set the record straight about the issue description.
So, assuming it is not a hardware issue, because I did not had this problem in all 2011 and 2012, I do not overclock the router neither use other than default TX power level.
- How do I begin diagnosing this issue?
- If it is a known issue with this builds? I could no find it.
My goal is to be able to provide info for debugging the problem and possible finding a fix/workaround it. If it is indeed hardware failing, how do I even begin to diagnose it from that POV? The message is empty...
Even with the new build r21061 still happened two more times. Now the real problem to me, is that I cant even revert it to stock firmware, I tried even with:
- unplug router
- press and hold reset
- plug router
- keep pressing until power led blinks orange
- enter 192.168.0.1 (PC must have static IPA, i use 192.168.0.200)
Can't open 192.168.0.1 in FF nor chrome and does not even ping. [URL]. I just want to get it back to stock or do not hang up the switch-to-router(ing).
View 1 Replies
View Related
