Philco PHN 15006 / Internet Stops Connecting After Some Time?
Aug 17, 2012
I have a Philco PHN 15006. My drivers should be up to date. Since I've started using it, I noticed I lose connection with internet and then I have to restart the switch/router. Then, it starts working again. I used to have to just open the Solve Problems and then it would connect again. But now, I tried just unplugging the Ethernet Cable and plugging it again. It had the same effect as restarting the switch. So, the problem must be in the notebook.The wireless internet is worse, because it connects for a while then stops connecting, while my other computer connects with no problems.
View 12 Replies
ADVERTISEMENT
Mar 11, 2011
My internet (wired and wireless) usually works fine, but occasionally (read: every few days to weeks) the connection will suddenly black out for a period of time, anywhere from an hour to a day. I have tried resetting both my router and modem, and going through all the settings on my laptop, but I'm pretty sure it's not my computer, as no other devices can connect either. During the blackouts, when I look at the modem, the internet light will turn on for a second, then go off and then the red "alarm" light (aka "something is wrong" light) starts blinking like crazy, and this keeps repeating. This resolves itself after anywhere from a few hours to a whole day and everything is normal again. The light show, and the fact that I can't find any other problems, leads me to believe that it could be a problem with my provider (or the network itself) and not a hardware or software problem, but I can't be sure of this.Also, during the blackouts, I can connect to the network, but it shows that limited connectivity symbol (exclamation mark thing) and says no internet.
View 5 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
Feb 11, 2012
My DIR-601 stops connecting to the internet so I have to power cycle the router daily, the 2.00 FW is not posted on the DLink Website. I don't have this problem with my Linksys router. E-mailing DLink doesn't facilitate since they tell me to call, and I don't want to sit through menus and scripts. Hardware rev is B1. Connection fails on both wired and wireless.Also, as a side item, D-Link should ignore MAC filter for wired connections.
View 14 Replies
View Related
May 1, 2012
Is it possible to connect to the internet through the Wifi and 3G internet from an iphone at the same time.If its possible are there benefits from it?
View 7 Replies
View Related
Jun 21, 2011
I have two routers one is a o2 router which is for the internet (broadband) the other is an old bt home hub which i have connected to the printer via usb. In order to print a document at the moment i have to disconnect my laptop from the broadband router and connect it to the printer router.Is there any way that i can connect to the two router s at the same time so that i while printing i can still keep my internet connection.
View 1 Replies
View Related
Mar 17, 2011
They time out however I can connect to google/ect on my browser.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersHannah>ping www.riftgame.com
Pinging www.gslb.riftgame.com [208.94.26.135] with 32 bytes of data:
Request timed out.
Request timed out.
[code].....
View 1 Replies
View Related
Nov 2, 2011
I have a Cisco 2911 router with 4 T1 connections. Two are set as a multilink and the other two are for two other locations. The router will run fine, but after a month I cannot ping the gigabit ethernet 0/0 interface. I would have to manually reboot the router to get it to respond again. Before I noticed a lot of interface discards which would shutdown the 2911 and a manual reboot would be needed, but for this time it isn't the case. Where would I start with this the memory and cpu usage are fine.
Here is the config:
Current configuration : 2905 bytes
!
version 15.0
[Code].....
View 2 Replies
View Related
May 11, 2012
I have setup a Cisco SR520W and everything appears to be working. After a few hours, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device.If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my the modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again.
View 1 Replies
View Related
Oct 2, 2011
I've been using my DCS-930L happily for the last month. Today, it suddenly stopped working. I haven't made any changes to my network or any configurations in about 2 weeks, during which the camera has worked fine locally as well as remotely. Now, if I unplug/plug it back in, the camera will immediately connect. However, after a period of time, it's no longer accessible, even from my local network. When I try to log-in to the camera or view it, it cannot be found or connected to. So it doesn't seem to be any of my configuration, but something that's intermittent or happens after awhile.
View 1 Replies
View Related
Dec 29, 2012
I am having problems with a customer's ASA 5505 with Anyconnect 3.1 - it is generating captive portal false-alerts which are stopping users from connecting. This issue began when I upgraded from Anyconnect 2.4 to 3.1, and it appears like this: A user downloads and installs the Anyconnect client and is able to connect fine, to begin with. However, once they reboot their computer and try to reconnect, the VPN session will not come up and they receive the error message below."The service provider in your current location is restricting access to the internet. You need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."
Reading other posts, it seems this message appears when a captive portal is restricting internet access. It must be a false alert in this case as there is nothing of the sort here. Apparently, Anyconnect 3.1 can generate a false alert like so if the name of the firewall's SSL certificate doesn't match the CName listed on the Client Profile. I've set this up to match, to no avail. Although users can connect by reauthenticating through the SSL VPN login web page, I am stumped as to how to get rid of this captive portal error that pops up when they try to use the Anyconnect client.
View 4 Replies
View Related
Mar 13, 2011
I want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..
View 1 Replies
View Related
Jun 25, 2012
Whenever I try to download anything with my computer, my Internet stops working and I must restart my computer in order to get it back. This only happens with my computer, since others in the house dont have the same issue.As strange as it may seem, this doesnt happen with Bittorrent. Only with regular downloads.
View 17 Replies
View Related
Sep 16, 2011
My internet stops approx in 10 min fo start of pc to an hour at times.Am not able to connect to router too.I have a wireless router and the PC is connected with a wire.The internet is not at fault as I can use the router @ laptop.Was on windows 7 Ultimate and all was working finer till 2 days ago. I thought May be I shoudl do a reinstall and installed my old and trusted win xp.Still its here. The win xp is completely updated and up to mark. I cannot even connect to the router 192 address when the internet stops.I have already changed dns to open dns. I remember that in windows 7 it used to show some dns /ip error , when I woudl trouble shoot at times and thus using open dns on router. Nothing working, and am going mad[CODE]
View 14 Replies
View Related
Mar 4, 2012
It's fairly hard to explain what happens but basically, say I'm playing some type of online game, all of a sudden anything server sided such as HP amounts, damage amounts, etc. just disappears but the animation runs fine such as attacking being hit, etc. All of a sudden it'll jump forwards and I'll take any damage and do any damage that had been happening until the issue started. This happens constantly and it's really frustrating but on top of that my internet will slow to a crawl..Say I'm trying to send a message on Skype, it won't send for the longest time and I won't be able to recieve any or even open a new webpage until the problem fixes itself.'ve looked around a bit and thought I fixed the issue, I'm on wifi and multiple devices are connected but not always in use, and the forum I found suggested an ip conflict and said to open up command prompt release the ip with ipconfig /release and then renew it with ipconfig /renew.
View 3 Replies
View Related
May 2, 2011
After buying a new WNDR370. Sporadically and seemingly without any cause my internet will stop working. Diagnostic will always report it as "DNS Server is not responding." I've also discovered that if I enter my router settings and even just switch the DNS settings from Auto to manual or vice versa the problem corrects itself instantly-then next time it happens I just need to do it again.
I've already tried resetting my entire network and rebuilding the recommended way. Modem, Router, then computers-connecting each only after the prior has finished initializing. Hasn't worked though.
Currently I have my main rig connected directly to the modem to try and find out if I experience the problem at all this way, this is a pain in the ass though, and I don't know when long enough is long enough as the issue is completely random and simply just may not happen.
View 10 Replies
View Related
Feb 10, 2013
My computer runs bit torrent almost all the time, sometimes when I start Firefox the home page google never loads and neither do any other web pages yet bit torrent is still working as if nothing has changed. If I start a download in Firefox come back to the pc a few hours later Google doesn't load but the Firefox download still continues.What causes this is it DNS ?
View 2 Replies
View Related
Aug 24, 2012
Internet works fine for a few minutes(around 2-5 usually), then it completely stops. It doesn't say it was disconnected, it just stops.Wireless has been working just fine the past few days.) We have used a desktop computer with this type of setup before and it worked just fine, that desktop was like a 2001 Dell that could barely stay on.
View 5 Replies
View Related
Mar 2, 2011
Internal network (LAN) works OK rock solid; only internet drops intermittently windows xp sp3 with latest updates wired connection
View 2 Replies
View Related
May 3, 2011
I think the built-in wi-fi of my laptop was destroyed so I connected a usb device that enables me to use wi-fi. Now, I tried to use internet, I was connected however connection was slow plus after a few minutes when I open another window it won't just connect. The window shows a blank page and on the tab it says untitled. I don't know what's the problem and what should I do to fix it.
View 2 Replies
View Related
Jun 17, 2012
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) Processor LE-1660, x64 Family 15 Model 127 Stepping 2
Processor Count: 1
RAM: 2045 Mb
Graphics Card: NVIDIA GeForce G210, 512 Mb
Hard Drives: C: Total - 292284 MB, Free - 43340 MB; D: Total - 12958 MB, Free - 1819 MB;
Motherboard: PEGATRON CORPORATION, NARRA5
Antivirus: AVG Internet Security 2012, Updated and Enabled
So here's my setup:Computer A is connected directly to a cable modem box via USB. Computer B (which is sometimes a laptop and sometimes a desktop) is connected to Computer A and shares its internet connection via Ethernet because I am too cheap to buy a router.A few days ago we borrowed a Belkin wireless router so we could have both desktops, the laptop, and my fiance's iPod Touch access the internet at the same time. That worked fine but once we returned the router and tried to put everything back to normal, it didn't work. The only computer able to access the internet is Computer A (or whichever one is directly connected).I tried resetting the modem and restarting both machines. I tried disabling all of the connections that showed up from using the router.Windows states that the IP isn't properly configured or something of that nature. I tried setting it to automatically set the IP but to no avail.Here is the part that really confuses me - I can access Computer B from Computer A via LAN using the ethernet cable, so the connection between the two computers is fine.
View 4 Replies
View Related
Aug 27, 2012
I lost internet from the ISP and parts of our LAN went down.We were able to reproduce the error.Problem: Internet from ISP drops, program using port 10541 within the LAN stops communicating with a server.The computer and server are on the same switch, neither require access to the internet.How we fixed the problem, temporarily: Unplugged the power from the cable modem.How we reproduced the problem: Unscrewed the cable drop to the modem and powered it on.I have checked our firewalls logs and have seen nothing that stands out. I was able to ping the server from multiple computers, including the one that had the program running on it.Also while the internet was down, I tried removing the DNSs from the computer running the program, this made no difference.
View 1 Replies
View Related
Nov 10, 2012
I have a windows vista pc networked to a second pc. I have wirelessly networked internet to 2 laptops. I have an actiontec wireless modem by verizon. All of a sudden my host pc started randomly losing internet connection, but the wireless laptops still have a signal. It seems like the host sometimes can't "see" the modem.Here are my settings while the internet is functioning.Microsoft Windows [Version 6.0.6001]Copyright (c) 2006 Microsoft Corporation. All rights reserved.[CODE]
View 11 Replies
View Related
Mar 10, 2012
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
BTW It's the REV_B with the 2.07 firmware.
View 2 Replies
View Related
Apr 29, 2013
My internet connection suddenly stops for about 30 minutes of using it. I need to restart so that I can connect again.
View 1 Replies
View Related
Jan 29, 2013
I can no longer browse through any browser, or update any programs (even though I am still connected to my wireless router). I have already done a Refresh, but the problem persists
View 2 Replies
View Related
Feb 7, 2013
A short while ago, I had my data backed up onto a new HDD, as the old one was showing signs of failing soon. When I got the computer back, I noticed a problem where I need to constantly hit "Diagnose" in the Wireless Network Connection Status to get my internet working again. When it gets into this stage, several websites continue to work, I don't lose my connection to them. Some websites I can still connect to without a problem. However, many websites, even google, keep giving an error that the host could not be found. It appears that it stops accepting new connections until I reset the wireless card. My Laptop (using wireless) and other PC (Connected directly) have had no issues at all with our wireless router.
View 4 Replies
View Related
Oct 16, 2011
Wireless internet connection stops working after anywhere from 10 minutes to two hours, a message pops up telling me it is "impossible to connect to my preferred wireless network", and then it fails to detect any wireless connections at all. The strangest thing is that when I try to "repair" the connection, which used to work, the computer immediately shuts down and restarts itself. It also seems like when I attempt to download something, like a movie for example, the connection fails right away, while if I'm just surfing the web it usually lasts around an hour before stopping. And when I restart the computer again it works perfectly fine at first, like right now, but eventually does the same thing.
View 9 Replies
View Related
Nov 12, 2012
I boot up my computer. I close it over. come back later. open it. Computer will connect but with the small yellow triangle. Thing is though, it's only my computer that ever has issues with my internet connection. My sisters laptop has never had an issue with out internet. Yet my laptop is able to connect to the neighbors internet fine. The solution to my problem almost all of the time is to simply reboot my computer, which solves the problem(most of the time). But i'm getting so sick of having to do it. The other times when a reboot doesn't work I have to manually reset the internet. As i'm typing this I'm on my neighbors internet. my sister is connected fine to our internet but my laptop simply won't work with it so i'll have to reset it when i'm finished this Some useful information might be that this problem only started happening ever since my computer got wiped.I've tried updating the drivers but apparently they're up to date.
View 5 Replies
View Related
Sep 16, 2012
I recently bought a new laptop (Asus U47VC) and i am having internet connection issues. When I am at my mother's place or at school, I have no problem connecting to the internet wirelessly. However, at my father's place, my internet stops working every couple hours and will be unable to connect to the network until i reset the router and modem. Once the reset is complete, I am good for another couple hours. All the other devices ( laptops, iphones, etc.) do not have this problem and the connection is never an issue. I have read that this could possibly be a problem regarding IP addresses but I do not quite understand how to fix this.
View 1 Replies
View Related
Apr 2, 2011
My internet connection works for 5 minutes and then stops .. works again for 5 minutes and then stops..... I'm using windows 7.
View 1 Replies
View Related
May 8, 2012
If set the LAN to 1000 duplex I get better throughput than If I set it to Auto 100/1000,but the problem is that then my internet modem stops working,is there a solution to this ?
View 11 Replies
View Related
Apr 11, 2012
The last few weeks my WAG 160N stops accessing the internet perhaps four or five time a day. Pulling the power plug for 20 seconds and reconnecting it usually gets it going again - until the next time.
Also I have noticed the internet light - the right hand LED - is red every so often. The gateway is behind my PC so I haven't been able to see if it always correlates withe the lack of connection.
View 7 Replies
View Related
