Printing / Internet Connection - Connecting To Two Routers At Same Time?
Jun 21, 2011
I have two routers one is a o2 router which is for the internet (broadband) the other is an old bt home hub which i have connected to the printer via usb. In order to print a document at the moment i have to disconnect my laptop from the broadband router and connect it to the printer router.Is there any way that i can connect to the two router s at the same time so that i while printing i can still keep my internet connection.
View 1 Replies
ADVERTISEMENT
May 1, 2012
Is it possible to connect to the internet through the Wifi and 3G internet from an iphone at the same time.If its possible are there benefits from it?
View 7 Replies
View Related
Aug 17, 2012
I have a Philco PHN 15006. My drivers should be up to date. Since I've started using it, I noticed I lose connection with internet and then I have to restart the switch/router. Then, it starts working again. I used to have to just open the Solve Problems and then it would connect again. But now, I tried just unplugging the Ethernet Cable and plugging it again. It had the same effect as restarting the switch. So, the problem must be in the notebook.The wireless internet is worse, because it connects for a while then stops connecting, while my other computer connects with no problems.
View 12 Replies
View Related
Mar 17, 2011
They time out however I can connect to google/ect on my browser.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersHannah>ping www.riftgame.com
Pinging www.gslb.riftgame.com [208.94.26.135] with 32 bytes of data:
Request timed out.
Request timed out.
[code].....
View 1 Replies
View Related
Sep 29, 2012
I lose internet connection every day in the same time etc.i lose it in 2pm and i get it in 7.pm and tomarow again lose it in 2pm get it in 7pmit is not virus i have cleaned every infection whit Malwarebytes,Emsisoft,Hitmanpro,SuperAntispyware and Spybot
View 4 Replies
View Related
Sep 29, 2012
I lose every day internet in the same time etc.in 2 pm and tomarow again in 2pm and also i get in the same time etc i lose internet in 2pm and i get internet in 7pm and tomarow again i have caled my ISP and it is not problem whit it also it is not virus.
View 3 Replies
View Related
Mar 3, 2011
It is usually by a router or install a third party software without anyone saying if it works or not.
I have two connections at home. One is a Wifi ( public wifi for my village) that i use for my phone and the other one is a wired dsl. I have used both but not on the same time. I tried connecting them both ( phone have tethering) but I think they are interfering with each other making me lose connection. I am using vista home.
I have seen the merge connections( in network and sharing center) and i have seen this one [URL].. but I am a little bit wary of changing my registry.
View 2 Replies
View Related
Mar 15, 2013
At around 2:30 PM each day, the internet slows down, and it says its connected but with limited access. A few minutes later, it gets full connection again, but it is super slow, then the same cycle starts over again. It stops happening around 8:00 PM.
View 1 Replies
View Related
Jan 19, 2011
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies
View Related
Jan 11, 2013
Can't use internet and phone at the same time on the N150 router. On DSL and whether on the DSL line or using VOIP when using the phone the internet goes down.
View 9 Replies
View Related
Sep 7, 2012
How to block Internet Connection during specific time.for example i want to block everyday between 8am to 12nn, then 1pm to 5pm.what are the options and better to achieve this kind of policy??
View 6 Replies
View Related
Jan 10, 2013
I am facing a proble in wireless connection speed that is getting very slow at a specific time, i.e., from 12pm to 2pm and from 9 pm to 2 am. The service is unlimitted type contract
View 1 Replies
View Related
Jan 17, 2012
Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies
View Related
Jun 15, 2011
I have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.
I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.
View 4 Replies
View Related
Dec 30, 2012
Does my Belkin F5D8236-4 ver. 1 (firmware 1.00.02) router support Apple's Bonjour print application. I can't get my iPhone or iPad to recognize my new HP Photosmart 7520 wireless printer which is connected to my network through my router.
View 4 Replies
View Related
Mar 12, 2012
One of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies
View Related
May 19, 2012
My Latitude D630 has been dropping internet connection all the time for the past three days. I looked up similar problems on this blog: a) cleared the DNS cache, b) downloaded windows XP- service pack 3, & 3 network software recommended for my laptop by Dell from the website and updated to the Intel PROSET/Wireless WIFI connection utility, d) ran ipconfig/all from C prompt and know the ethernet connections are disabled, e) called and checked with our local ISP and cleared the connection from their end. To sum it, I have tried everything I know and am still not able to maintain a steady connection to the net using WIFI. However I am able to connect using the cable to the router, so my net provider said the problem is with the wireless connection on the laptop. I didnt have this problem before.
View 1 Replies
View Related
Mar 11, 2013
How to configure Belkin N (F5D8636-4) Client IP Filtering so that a range of client IP' deny access to the internet using the following blocked time ranges e.g. Mon 5:00pm to Tues 2:00pm, Tues 5:00pm to Wed 2:00pm, Wed 5:00pm to Thur 2:00pm, Thur 5:00pm to Fri 2:00pm, Fri 5:00pm to Sat 10:00am, Sat 1:00pm to Sun 10:00am, Sun 1:00pm to Mon 2:00pm - BTW - this access regime is to deny internet access for my teenage son?
View 3 Replies
View Related
Oct 10, 2012
I have two routers, one Apple router and a WNDR4500. The WNDR4500 is the second router and I need to have access to the computers and printers on the first router. Right now I have a cable from the first router (Apple Router) connected to the WAN port on the second router (WNDR4500). How do I set up so I can use both routers as wifi access-spots, both have internet and all the printers and computers are available on both? So I can print and share regardless of which wifi and router I'm connected to.
View 2 Replies
View Related
Dec 15, 2011
I have a very interesting problem, that I cannot figure out at all after trying test after test. The problem in a nutshell:I connect a wireless access point to our network and within 10-15 minutes any wired LAN users internet connection goes down, yet the wireless internet works fine.Here is how our small business network is setup:1. We have a Server 2000 that serves as our companies domain controller and DHCP (I know, I know..dated). We also have another server on our network, which is a Server 2003, which is primarily a backup domain to our Server 2000 and hosts Quickbooks that our employees use and a small intranet website via ISS. We are connected to a router from our ISP with a gateway IP of 192.168.1.2. Our ip address structure is 192.168.1.xxx and subnet is 255.255.255.0.
2. I have configured the AP to be just that, an access point to broadcast wirelessly and made sure that DHCP is turned off on the router. I set it to a static ip of 192.168.1.215 and subnet of 255.255.255.0 and our default gateway of 192.168.1.2. Once I connect it, everything works fine for about 20-30 minutes, then our LAN internet goes down. The Wireless G access point that I am using is a TP-Link Model TL-WA501G.
View 1 Replies
View Related
Mar 9, 2012
my computer has windows 98 and when i connect it to my router it can not connect to the internet! what do i need to do?
View 1 Replies
View Related
Oct 3, 2012
I can browse web pages and such, but i can't watch any videos or download bigger files. The videos usually play for about 4 seconds and files download about 3 MB before it just loads forever. I go to control panel and look at the network connections, and while the LAN is connected, the internet gateway just says "connecting".
View 1 Replies
View Related
Aug 25, 2012
I have Inspiron 14R using it for more than 1 year, from yesterday im not getting the internet connection but it detects my Wifi connection.
Wifi router has been resetted and turned off, but it doesnt connect. Wifi is connecting in my mobile but its not connecting to my laptop.
View 4 Replies
View Related
Apr 11, 2011
my Netgear WPN824v2 router won't connect to the internet. It stopped connecting after a power outage 4 days ago. All local connections work fine. wireless unaffected. I tried a different router, but it wouldn't work either. Contacted my ISP, they said get a new router. Tried re-installing firmware, no change. I haven't tried it on a different internet connection yet, but plan to visit a neighbor and do some begging
View 6 Replies
View Related
Jan 13, 2011
Whenever i connect a particular acer laptop to the internet at work via the wireless, internet access is lost after a period that ranges from 30 minutes to 1 hour and i have to reboot the VSAT modem to restore internet connectivity. This cycle of rebooting the vsat modem to restore internet access goes on and on until the problematic laptop is powered off.Initially i thought the problem was with the modem since i always had to restart it, but i noticed that if i didnt take that laptop to work, internet access stayed up the whole day.The acer laptop is enabled for DHCP and connects to a cisco wireless acess point that is connected to a cisco 2960 series switch which is in turn connected to the VSAT modem.
View 7 Replies
View Related
Oct 19, 2011
So i have set up my Dir-615 router and it worked for about a week perfectly. Then one day i was able to connect to the router, but it says that there is no internet connection. This is untrue since i am able to connect to the internet if i unplug from its WAN port and put it straight into my laptop.
View 8 Replies
View Related
Jul 6, 2012
After a power failure nothing could connect to the internet anymore. I called MTS (ISP provider) and they had me change some setup on my PC. Now my PC connects to the internet, but nothing else will connect (X Box, WII, iPods, Laptop). They were connected wireless before the power outage through my router. MTS said they are only responsible for ensuring their model works, not routers.I have checked some router settings. It is set for DHCP with 50 users.
View 15 Replies
View Related
Oct 25, 2012
I've got a Cisco DPC3825 modem that I also use as a wifi router. Conntected to it I have 4 eithernet cables:
1. From PC to Router
2. From another PC to router
3. From TV to router
4. From a Dlink Powerline Adapter to Router.It took me a while to figure this out but when I unplug all the eithernet cables and plug back in #1 and #2 (from above) the internet works. When I plug back in #3 and #4, the internet dies. Meaning, I am connected to the network but not the internet. I've reset the modem, changed SSID and restarted the PC many times but still can't figure out this issue.
View 5 Replies
View Related
Mar 1, 2011
I have two BELKIN f5d7230-4 wireless router my goal is to connect the two wirelessly and share the internet connection.
View 2 Replies
View Related
Dec 10, 2012
I am connecting to internet via motorola modem which gives me approx 6 Mbps download speed when I test it with both speedtest.net and speakeasy.net. Any device that I use connected wirelessly to my Belkin N300 router only acheives about 1.3 MBps of download speed. Is this just the way it is or could I have a router configuration issue or something else?
View 2 Replies
View Related
Jul 26, 2012
My PC can't seem to keep the wireless connection for longer than a few seconds without it trying to reconnect and eventually drop again. Other family members' PCs don't seem to have this problem and my laptop also has a stable connection.
I used to have no problem connecting, but this problem arose one day. My house uses Verizon FIoS, the router is a Netgear R3600 and my PC uses AVG.
The picture has the signal showing up, but then it disappears seconds later only to reappear again.
View 4 Replies
View Related
Mar 13, 2011
I want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..
View 1 Replies
View Related
Mar 8, 2013
I currently have a Router that is ADSL2 & VPN capable. It currently allows me to work from home and connect to work servers securely. I have used traceroute [URL] in CMD to determine that all web requests/traffic goes through the VPN server rather than just the requests to access files on the VPN server.I don't feel comfortable having all my traffic now go through work servers(the VPN) so I would like to avoid this. I know I have 2 solutions:- Use Split Tunelling on the router where only requests to files on the VPN server will go through the VPN server, all other traffic is not through the VPN. I have heard that this can compromise the whole network as one node is currently 'unsecured' and can affect/compromise the whole network. Is this true?
- Add a second Router that doesn't connect through the VPN. When I finish work I disconnect from the VPN Routers wireless connection and connect through the second routers wireless connection. I would like to take solution 2 because I wont be compromising the whole network but I have some questions:- Is this something you would recommend?
- Is it dangerous? Is it just as compromising as solution 1?
- In Australia we use physical Phone Splitters for our internet physical connection. One side of the splitter connects to a phone line port on the wall. The other side has 2 ports, one for the phone line connection and one for the router/adsl connection. If I have 2 routers I'll need a splitter that has more than 2 ports so I can connect the 2nd router to the internet. Are there Phone Splitters with more than 2 ports and do ISP's allow me to do this?
View 1 Replies
View Related
