At around 2:30 PM each day, the internet slows down, and it says its connected but with limited access. A few minutes later, it gets full connection again, but it is super slow, then the same cycle starts over again. It stops happening around 8:00 PM.
View 1 Repliesproblem is that my internet traffic slows down to a stop after 5 minutes or so of activity. It is not a complete stop, sometimes I may get a tiny burst of traffic after 2 minutes or more of inactivity. I am connected via an ADSL wireless routerOther computers on the (windows workgroup) network do NOT have this problem. I am able to communicate normally with other local network computers. I am using Windows XP SP3, there are also Windows 7 computers on the local network[CODE]
View 4 Replies View RelatedI have a D-Link DIR-655 Router with a Motorola SB5101. When the computer is directly plugged into the modem i get 10Mpbs but when it is connected to the modem (either wireless or wired) the max speed is >3Mbps.
View 3 Replies View RelatedI have a mysterious problem with my Internet connection. The Edge topology is in the attachment so are the most important "show" commands. We have a 50Mb/s symmetric Internet connection. When we use Internet through ASA the download speed does not exceed 3Mb/s whereas the upstream is at about 45Mb/s. When we connect our LAN directly to 2960 the downstream increases dramatically up to 47Mb/s whereas the upstream remains at about 45Mb/s. Duplex is manually set to 1000/full on all interfaces. All that I have noticed are dropped packets on outside interface (Gi0/0). The reason is unclear.
View 6 Replies View RelatedI have just bought an E3000 router when my old router died last week. I am having two problems:
1. The data rate slows down after a period of time (long message trail elsewhere)
2. I cannot see everything on the network.
I have several Win 7 computers, two win xp computers, three NAS devices (linux based), and a printer sitting on the network, along with two switches to cope with all the traffic (not to mention iPods, iphones etc.)With my old router, I couold see everything plugged into the network from my main Win 7 computer. (note: the win 7 network map does not always work, but the windows explorer window of the network always showed everything).With the E3000 router, I can only see 1 or 2 of the devices on the network. If I reboot the router, then sometimes all of the devices appear on the windows explorer window (sometimes not)I am running a workgroup (not a domain) and i am not using win 7's homegroup because that will not work with the non-win 7 devices.Is there a setting that will see all of the devices in Win 7 (either on the router or on the computers). I suspect it is a router issue as it worked with my old Zyxel router.
I lose internet connection every day in the same time etc.i lose it in 2pm and i get it in 7.pm and tomarow again lose it in 2pm get it in 7pmit is not virus i have cleaned every infection whit Malwarebytes,Emsisoft,Hitmanpro,SuperAntispyware and Spybot
View 4 Replies View RelatedI lose every day internet in the same time etc.in 2 pm and tomarow again in 2pm and also i get in the same time etc i lose internet in 2pm and i get internet in 7pm and tomarow again i have caled my ISP and it is not problem whit it also it is not virus.
View 3 Replies View RelatedIt is usually by a router or install a third party software without anyone saying if it works or not.
I have two connections at home. One is a Wifi ( public wifi for my village) that i use for my phone and the other one is a wired dsl. I have used both but not on the same time. I tried connecting them both ( phone have tethering) but I think they are interfering with each other making me lose connection. I am using vista home.
I have seen the merge connections( in network and sharing center) and i have seen this one [URL].. but I am a little bit wary of changing my registry.
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies View RelatedMy DIR-601 router with 1.02NA firmware When the wireless is activated and not in use by any device (as shown in the wireless status) I experience major and gradual slowdown of my DL/UL speeds and ping. When I deactivate wireless the problem is solved even though no device was using the wireless at the time of the slowdown. I've tried resetting, reverting to factory defaults, updating the firmware(was already up to date), unplugging the router for a considerable amount of time (2hours+). Even though it's not quite related I've tried connecting directly to the modem just for thoroughness' sake.
View 1 Replies View RelatedHow to block Internet Connection during specific time.for example i want to block everyday between 8am to 12nn, then 1pm to 5pm.what are the options and better to achieve this kind of policy??
View 6 Replies View RelatedI have two routers one is a o2 router which is for the internet (broadband) the other is an old bt home hub which i have connected to the printer via usb. In order to print a document at the moment i have to disconnect my laptop from the broadband router and connect it to the printer router.Is there any way that i can connect to the two router s at the same time so that i while printing i can still keep my internet connection.
View 1 Replies View RelatedI am facing a proble in wireless connection speed that is getting very slow at a specific time, i.e., from 12pm to 2pm and from 9 pm to 2 am. The service is unlimitted type contract
View 1 Replies View RelatedIs the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies View RelatedWhen connecting wirelessly (5GHz) to the E3000 after a day or so the wireless connection starts loosing speed. I have Comcast and usually get 20-30 MB download connections. After a day or so I start to lose speed (down to 5MB) until I reboot the E3000. Then I resume 20-30MB download connections. My wired connections appear fine and don’t experience the slow down. I'm doing my speed test with [URL]
The wireless slow down seems similar to the old memory leak condition of old Windows OS’s. Called Cisco and they don’t have an idea. They had me change a few settings (channel info) but I’m pretty technical and don’t feel that will fix it.
I have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.
I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.
I believe it is because of my GFX card driver, because when not enabled, im getting around 5mb/s DL and once I enable it, I get around .37mb/s.
View 7 Replies View RelatedI have a WRT160Nv3 router connected to a CM100 modem. I noticed that over time, perhaps a day or more, the connection speed slows. Usually, unplugging the router for a while then starting it up again restores the speed as per my cable company's speed test. I have called the cable company and their tech support reports a good signal to the house.
View 6 Replies View RelatedI'm using Cisco EPC3825 cable modem for my home network, and wondered a thing, that if I set up modem to work in router-mode, my real connection speed slows down to around 5-7Mt/s, when using modem in bridged mode, my connection speed is close to 15-20Mt/s. My serviceprovider provides 200/10M speed to my modem, and they've checked, that modem is working with 204/10M speed, and computers works also, if using modem in bridged-mode.
View 1 Replies View RelatedI have just upgraded from 20mb to 100mb internet with virgin media and ever since then when ever i try download any thing it start's downloading at a high speed then it slowly decreases until it dies out and stops like this
I tried a speed test to see what i was receiving it started at 100mb/s then it started to go down stopped for a sec then shot down to 10mb/s like this
When I am playing a game or watching a video on youtube or twitch it's fine streams with out needing to buffer only time i notice this is when i try to download some thing
I have FiOS and their supplied wireless router Actiontec #: MI424WR. I have equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. This is working great for my wireless home theater equipment but I am having problems with my wired speed. It has gone from 20 to 30 mbps to around 10 mbps. I have one of the LAN outputs on the Actiontec feeding the Linksys input, I have my computers plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get my speed back or will I have to plug the computer back into the Actiontec and move it every time I may need to make a change to the Linksys
View 3 Replies View RelatedOne of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies View RelatedMy Latitude D630 has been dropping internet connection all the time for the past three days. I looked up similar problems on this blog: a) cleared the DNS cache, b) downloaded windows XP- service pack 3, & 3 network software recommended for my laptop by Dell from the website and updated to the Intel PROSET/Wireless WIFI connection utility, d) ran ipconfig/all from C prompt and know the ethernet connections are disabled, e) called and checked with our local ISP and cleared the connection from their end. To sum it, I have tried everything I know and am still not able to maintain a steady connection to the net using WIFI. However I am able to connect using the cable to the router, so my net provider said the problem is with the wireless connection on the laptop. I didnt have this problem before.
View 1 Replies View RelatedI have a Zoom 5350 Cable modem/wireless router. When I'm using uTorrent on a wired connection, and DHT is updating, my internet surfing is inaccessible for like 2-3 mins. This is even when I have no DL or UL going. It's really frustrating.
I have a Motorola modem that I tested on and it's fine with the DHT thing. Seems like maybe a setting in the Zoom 5350 is causing a slow down?
I'm getting rid of this modem/router soon. I'm just going to run a cisco e900 with my motorola modem, but I still would like to know if this is a common problem and what possible remedies there are..
We have Cisco ASA 5510 256RAM running 8.2.4 with CSC 6.3.1172.4, it slows down internet traffics drastically when we do speed test, we get something like this, It the computer is bypassing the CSC, it gets This was done when there's very low traffic on the LAN and CPU is low usage on the CSC. The CSC has been re-imaged also but still doesn't solve the problem.
View 6 Replies View RelatedWhenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. Interestingly, the local network appears to be fine, with scp copying files at reasonable rates; around 4.5MB/s to the Pi.
I've tried static and dynamic IP addresses for the Pi, but both have the same problems. Switching from Raspbian to Arch also had no effect.I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected.
My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occasionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. I recently tested the connection with the Pi plugged straight into the modem (rather than via a wall socket) and it managed to crash it entirely!
I used to use a DSL modem/router supplied by Bell (my ISP) and it was a 2wire router, but the signal was not enough to supply my entire house, it was 802.11b/g.Now recently I bought a Tenda W307R, N router all-in-one with an AP.I just plugged it right into the 2wire (modem) and now the Tenda routes the wireless signal. However, I am experiencing that it slows down every few minutes or so, for 30 second intervals, then the internet catches on again and everything is good.
View 2 Replies View RelatedWhy my internet was so slow .90mbps. They got on my mac and changed the Ethernet setting to "manually" instead of "Automatic", then changed the speed to 10mbps instead of "autoselect". Now the internet is going at the 10mbps im supposed to be getting, but when i plug it into my router (wall>router>laptop) i get the .90mbps again. So do i how do i change the same setting on the router?
View 1 Replies View RelatedRecently I upgraded my Internet speed at the ISP from 10Mbps to 25Mbps and the problem is that I am measuring only 15Mbps using [URL]On the day when the tech came out to install the new DSL modem, he noticed the difference and as part of troubleshooting, he bypassed the Linksys router and voila the net speed measured 25Mbps using speedtest.net.So, why my Linksys WRVS4400N V1.1.13 acts like a bottleneck in this case? I didn't have this problem at the speed of 10Mbps. The upload speed is OK, it is 5Mbs with or without the DSL modem.
View 2 Replies View RelatedI have had a wireless network set up in my 2-level home. There is one cable connection to the house. My roommate has set up a separate wireless (WPA) on the lower level..without coordinating with me. Could this cause technical difficulties for connecting to or speed in surfing the internet?
View 1 Replies View RelatedFacing some troubles with my internet speeds, firstly the set-up is very simple, its just about 4 devices connected to a regular home router, 2 devices are connected via wireless and i am having trouble with my desktop PC.
Basically what keeps happening is that it fluctuates between 10Mb/s and as low as 0.8Mb/s, right now its at about 4Mb/s but i cant understand why this keeps happening, I am using a G wireless USB NIC and the laptop (the other wireless device) is fairly new so it should be an N wireless NIC, also it doesn't change my speed when it is being used for browsing and my neighbors wireless devices are also laptops with N cards. I believe that the router is G, having 3Mb/s at best which is far worse than normal.
I'm having trouble with my internet the past few days, I'm connected to the internet via wifi and after browsing some minutes it will tell me unable to connect (using firefox and other explorers). In order to continue browsing I must refresh the page several times and it will load without pictures.I'm using win7 home premium and it's the only computer that presents this issue. I've tried pluging the computer directly to the router, but it gives me the same results. Also, I've scanned the computer for malware with MCafee, but it shows nothing.
View 3 Replies View RelatedWhen my download starts or reaches half way the internet connection stops. How to keep the net connection connected all the time? and specially during downloads?
View 1 Replies View Related