I have two computers in my house that are connected via ethernet using a switch. One computer is connected to a friends internet connection by wireless using a satellite dish. That computer is on XP and I have configured it as follows (IPv4)[CODE]
View 4 RepliesMy D-Link won't allow my laptop to connect to the Internet through an Ethernet connection. I set up the router using a standard Ethernet patch cable and cloned the laptop's MAC address to connect through the Mediacom modem. I then decided to test out the wireless and got that all set up, works perfect. Now I cannot connect to the Internet using the Ethernet cable.
View 1 Replies View RelatedMy internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies View RelatedHow can I get 2 internet connections for 2 in home computers from 1 cable internet connection.
View 1 Replies View RelatedFirst is your output from TSG SysInfo program:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 32643 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 304892 MB, Free - 237708 MB;
Motherboard: MSI, Z77A-G45 (MS-7752)
Antivirus: Windows Defender, Disabled
You must realize that I live away from the city and only have an iPhone 4 for a hot spot. It connects via WiFi, Bluetooth and USB. I have found USB quicker, but it doesn't seem to work under Windows 8. So I connect via WiFi only.I have a LAN, based on a D-Link DIR-615 router. This router has a WiFi option and has a Buffalo File server attached to the device that we use as a backup/file server and personal 'cloud'. When I am connected via WiFi and I plug in the Ethernet connection, the computer overrides the WiFi and attempts to connect to the Internet via the Ethernet port. It does know that the WiFi is connected as it is displayed on the bottom of the status bar as 'Internet', but choices to ignore or not check. I have gone to the devices and changed the priority to be Wireless on top and Ethernet on the bottom. This is done via the "Network and Sharing Center", "Change Adapter Settings", ALT-F (to get "File, Edit, View, Tools, Advanced and Menu" options), "Advanced" and finally "Advanced" again.Then put them in the priority you wish. Ethernet still overrides this and times out when I attempt to access anything on the Internet. It works the same on my wife's Windows 7 Laptop. It returns to normal if you unplug the Ethernet cable. Since I wish to have other files available, it is a pain in the bottom to have to unplug the Ethernet cable every time you change over to do something else and I usually forget and have to deal with the 'can't connect' message.It might be a simple solution to connect via WiFi to the router then hard wire the computers to the router, but this hasn't been a workable option. The router doesn't seem to be able to handle that type of connection?
I have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies View RelatedIm having a ACT Broadband internet connection, he provides internet connection through a wire which runs into my room that can be directly connected to the my computers NIC. Whenever i switch on my computer and opens the browser it first redirects to the page url... where it asks for Username & Password, our ISP gives us a IP Address which displays on the web page after logging in.I want the internet connection to be shared with my roommates so i bought a 8 port Ethernet switch (url..), which is having a uplink port also. I have connected the wire given by the ISP to the up link port of the switch & i connected my PC to one port of the switch with another network cable. I also connected my friends PC to second port of switch with another network cable, my problem is that when i sign into my ISP web page and start using the internet & my friend also wants internet in his PC & when he opens the browser the ISP's webpage is appearing and when he sign's in internet is disconnecting in my Pc. I tried to change the IP but as a default IP is given by the ISP if change the IP internet is not working.
View 3 Replies View RelatedI'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor!I also plan to connect to the TV.
View 1 Replies View RelatedI'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor! I also plan to connect to the TV.
View 1 Replies View RelatedI am trying to connect internet through Ethernet LAN .But I am unable to access internet. It says unidentified network with limited connectivity or local only access. But the same connection is working fine on other laptop. I checked the device manager and every looks working fine.In my ipconfig /all details, my Eternet LAN physical address shows all zeroes and has no default gateway address .Also the DNS servers address shows some alphabets instead of numbers.
View 14 Replies View RelatedI installed the DIR 655 router using the install disk. I hooked up my Vista desktop machine via the ethernet port. I also activated a Roku box and my Itouch successfully via the wireless.I turned MAC filtering on and manually entered the MAC addresses for the three devises. Everything worked fine.After I rebooted the desktop, I could no longer get to the internet via the desktop connected through the ethernet. The Roku Box and I-Touch both work fine and enjoy a strong wireless connection.I've tried rebooting the desktop several times, but still can not access the web. I also can not access the router by typing in 192.168.0.1. I entered the configsys stuff and verifited that I am using the right numbers.
View 14 Replies View RelatedSo you've got broadcast networks - Ethernet, PPP networks such as serial & T1/E1 and then youve got Non-broadcast multi-access links such as Frame relay and ATM. I understand the concepts of each. That's not the problem.My question is, is it possible create a broadcast network (Ethernet) but also connect a router to another router via a PPP connection? Say to a specific branch for example. Just curious if you can use multipule link types.
View 4 Replies View RelatedMy dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
[Code]....
So, for some reason my internet connection started disconnecting about every 1-5 minutes. It worked fine this morning, however, when I turned my PC on a few hours ago it became very unstable. After it happens I have to reconnect to internet (it doesn't work all the time, I usually have to do it two times for it to work), and then again after a few minutes the connection dies. Tried restarting my computer, tried restarting the modem, tried the troubleshooting network thing (it keeps saying "Local Area Connection doesn't have a valid IP configuration", but gives no solution). Also, I tried connecting on my cellphone and on a laptop and both of those work. However, those connect through WiFi, while my PC is connected through an ethernet cable[code]
View 4 Replies View RelatedAs of around a week ago, I've been experiencing a strange thing with my internet connection. I live in apartments that provide internet to everyone that lives there, and had been living here for a few months before this started happening.I now constantly have my internet crashing in the middle of browsing/gaming. I will either open up my laptop to the internet not working already, or it will work, but crash randomly while I am using it.
Trying to load a page on google chrome, it will show a message saying DNS Lookup Failed, and an icon will pop up in the right corner of my screen with a yellow (!) triangle. If I hover over it, it will say no internet access.I've followed the few steps they had on there, but none of them worked. I've never had a problem like this before, and haven't made any modifications to anything on my computer lately, so I am pretty confused as to why this is happening. I know it is something on my end, because my roommate's internet is just fine, and even used my ethernet cord on her computer, and no problems at all.
I have an telemetry equipment which have one ethernet RJ45 port, so I have an internet connection and I can connect to this device remotely using a browser on my PC for security reason I want to feed this device with a second internet connection that is coming from a cellular line , can I just put the two different Internet cables into a switch and from that switch connect my device?
View 1 Replies View RelatedI was wondering if there was any way i could have the wireless connection go in to my laptpop then have the laptop convert it to an ethernet connection that i could then run to my ps3.
View 2 Replies View RelatedI was using my dlink dir 524 but when i change my isp i cannot connect my desktop via ethernet while the internet works good on my laptop via wifi i had done all thing by turning off firewall but no luck i was using xp on my desktop and windows 7 on laptop.
View 4 Replies View RelatedI have a desktop computer that I recently installed Windows xp on, and the computer is now missing the drivers. The problem is that the computer was built by a friend and I do not know exactly what drivers that may be needed for this computer connect to the web.
View 17 Replies View RelatedI recently bought my desktop home from my uni dorm and i can't seem to connect to the "unidentified network" which would be my home network. The Ethernet cable is flashing orange and my routers LAN port light is orange. Below is my current ipconfig.
View 1 Replies View RelatedIn my college dorm, there are ethernet plugs in the wall. Yesterday, the internet was working fine, but today, when I tried using the internet, it'll connect to the (router? group?), but it won't connect to the internet. I've tried the same plug with my roommate's Macbook, and it worked just fine, so I am assuming it is a problem with my computer (or my own incompetence). Normally, I would just try restarting my modem, but that isn't an option here.
Specs:
Intel Core 2 Quad Q9650 @ 3GHz
Zotac nForce 790i motherboard
4x2 crucial 1333MHz RAM
My router has been working fine until yesterday when it randomly stopped functioning for me. I can only connect to it via wireless. Other computers in my house can connect directly to it though. I have tried cycling the modem and router. Reinstalled drivers. Nothing, it just constantly says "identifying" for less than a second then reappear in a constant cycle. [code]
View 7 Replies View RelatedI've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies View RelatedI am using Scientific Linux 6.2 (Variant of RHEL / CentOS) . Every day at a particular time there is a power outage at my place, and after 1 hour power is restored. My laptop is connected to a network switch, that has no Backup power, and connection is disconnected when power is gone. Laptop keeps running in battery power.
Now when power is restored, the ethernet connection (eth0) is not automatically restored in linux. It only says connection available under wired connection. The same thing happens to the Wireless Network Connections. What can I do to automatically connect to these networks, whenever they are available?
All of a sudden whenever I reboot my PC it can no longer see the router (ie it won't show up anything when I type in http://192.168.1.1) Usually I just mess about rebooting the router or reinitialising the network card (as instructed by the wizard!) eventually this works.... but not today...I can't connect - all the time the laptop connected wirelessly to the same router works fine. It's set up to obtain an automatic ip address whatever that means, could this be the problem ?? When I ping 192.168.1.1 (an instruction I found on another forum) it doesn't work..
View 2 Replies View RelatedFor some reason, i cannot connect to the internet using my current ethernet cable. I am 100% positive that adapter is working fine, as i had maintenance come into my room and check it out, but my computer won't connect to their internet through my cable. [code]
View 4 Replies View RelatedAll of a sudden whenever I reboot my PC it can no longer see the router (ie it won't show up anything when I type in http://192.168.1.1) Usually I just mess about rebooting the router or reinitializing the network card (as instructed by the wizard!) eventually this works.... but not today...I can't connect - all the time the laptop connected wireless to the same router works fine. It's set up to obtain an automatic ip address whatever that means, could this be the problem ?? When I ping 192.168.1.1 (an instruction I found on another forum) it doesn't work.
View 1 Replies View RelatedI have my bigpond internet setup on my main pc,works fine connected to a router but i want to connect to the internet via ethernet cable on my 2nd pc. I have a ethernet port on the wall near it so that should work. I don't want to run a long ethenet cable from my router to my 2nd pc because there's a ethernet port right next to it.
View 6 Replies View RelatedAm trying to fix my husband's computer, which seems to eb ok except that it cannot connect to the internet. The connection is wired and works fine (my computer, next to his, works well). I have tried pinging google.com and cannot resolve, but pinging numerical addresses works fine.
View 1 Replies View Relatedmy vaio vpcEh3f1e will not connect to the Internet, via Ethernet cable or wifi. All other laptops, iPads, mobiles are connecting fine apart from this laptop. It can connect in safe mode with networking.
[code]....
Desktop cannot connect to internet through Ethernet, what do i do?
View 1 Replies View Relatedi went over to my grandma house and got wireless mouse and the mouse uses a floppy disk to put some sort of wizard wireless network thing on my computer but now i cxan use said floppy disk be cause it broke but ever sence i used that i cant conect to the internet
View 1 Replies View RelatedMy homemade computer onto the internet through Ethernet. I have a cable attached to my computer and it is lighting up as if it were working but I am not connected to a network. I know it is not a problem with my Ethernet cable because I have tried it on other computers successfully. When I entered ipconfig/all in the command prompt it showed up with media state as disconnected and no IP address.
View 4 Replies View Related