Get 2 Internet Connections On One Ethernet Connection?
Dec 2, 2012How can I get 2 internet connections for 2 in home computers from 1 cable internet connection.
View 1 Replies
ADVERTISEMENT
Split A Single 4 - Pair Ethernet Connection Into Two 2 - Pair Ethernet Connections
Dec 28, 2011I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
Internet Connection Is Ok But Can't Connect Using Ethernet?
Feb 7, 2012I have two computers in my house that are connected via ethernet using a switch. One computer is connected to a friends internet connection by wireless using a satellite dish. That computer is on XP and I have configured it as follows (IPv4)[CODE]
View 4 Replies View RelatedEthernet Overrides Wifi Internet Connection?
Feb 13, 2013First is your output from TSG SysInfo program:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 32643 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 304892 MB, Free - 237708 MB;
Motherboard: MSI, Z77A-G45 (MS-7752)
Antivirus: Windows Defender, Disabled
You must realize that I live away from the city and only have an iPhone 4 for a hot spot. It connects via WiFi, Bluetooth and USB. I have found USB quicker, but it doesn't seem to work under Windows 8. So I connect via WiFi only.I have a LAN, based on a D-Link DIR-615 router. This router has a WiFi option and has a Buffalo File server attached to the device that we use as a backup/file server and personal 'cloud'. When I am connected via WiFi and I plug in the Ethernet connection, the computer overrides the WiFi and attempts to connect to the Internet via the Ethernet port. It does know that the WiFi is connected as it is displayed on the bottom of the status bar as 'Internet', but choices to ignore or not check. I have gone to the devices and changed the priority to be Wireless on top and Ethernet on the bottom. This is done via the "Network and Sharing Center", "Change Adapter Settings", ALT-F (to get "File, Edit, View, Tools, Advanced and Menu" options), "Advanced" and finally "Advanced" again.Then put them in the priority you wish. Ethernet still overrides this and times out when I attempt to access anything on the Internet. It works the same on my wife's Windows 7 Laptop. It returns to normal if you unplug the Ethernet cable. Since I wish to have other files available, it is a pain in the bottom to have to unplug the Ethernet cable every time you change over to do something else and I usually forget and have to deal with the 'can't connect' message.It might be a simple solution to connect via WiFi to the router then hard wire the computers to the router, but this hasn't been a workable option. The router doesn't seem to be able to handle that type of connection?
Ethernet Or Wireless Connection But No Internet Access?
Jan 2, 2011I have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies View RelatedHow To Share Internet Connection Using Ethernet Switch
Mar 23, 2012Im having a ACT Broadband internet connection, he provides internet connection through a wire which runs into my room that can be directly connected to the my computers NIC. Whenever i switch on my computer and opens the browser it first redirects to the page url... where it asks for Username & Password, our ISP gives us a IP Address which displays on the web page after logging in.I want the internet connection to be shared with my roommates so i bought a 8 port Ethernet switch (url..), which is having a uplink port also. I have connected the wire given by the ISP to the up link port of the switch & i connected my PC to one port of the switch with another network cable. I also connected my friends PC to second port of switch with another network cable, my problem is that when i sign into my ISP web page and start using the internet & my friend also wants internet in his PC & when he opens the browser the ISP's webpage is appearing and when he sign's in internet is disconnecting in my Pc. I tried to change the IP but as a default IP is given by the ISP if change the IP internet is not working.
View 3 Replies View RelatedPC Disconnects From Internet / When Remove Ethernet Connection
Jul 2, 2012I'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor!I also plan to connect to the TV.
View 1 Replies View RelatedPC Disconnects From Internet When Remove The Ethernet Connection
Jul 2, 2012I'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor! I also plan to connect to the TV.
View 1 Replies View RelatedEthernet LAN Connection Unable To Access Internet
Sep 26, 2012I am trying to connect internet through Ethernet LAN .But I am unable to access internet. It says unidentified network with limited connectivity or local only access. But the same connection is working fine on other laptop. I checked the device manager and every looks working fine.In my ipconfig /all details, my Eternet LAN physical address shows all zeroes and has no default gateway address .Also the DNS servers address shows some alphabets instead of numbers.
View 14 Replies View RelatedD-Link DIR-655 :: Can't Get Internet Connection Via Ethernet Port
Feb 18, 2011I installed the DIR 655 router using the install disk. I hooked up my Vista desktop machine via the ethernet port. I also activated a Roku box and my Itouch successfully via the wireless.I turned MAC filtering on and manually entered the MAC addresses for the three devises. Everything worked fine.After I rebooted the desktop, I could no longer get to the internet via the desktop connected through the ethernet. The Roku Box and I-Touch both work fine and enjoy a strong wireless connection.I've tried rebooting the desktop several times, but still can not access the web. I also can not access the router by typing in 192.168.0.1. I entered the configsys stuff and verifited that I am using the right numbers.
View 14 Replies View RelatedPC Connected To Ethernet Cable - Internet Connection Keeps Disconnecting?
Mar 21, 2013So, for some reason my internet connection started disconnecting about every 1-5 minutes. It worked fine this morning, however, when I turned my PC on a few hours ago it became very unstable. After it happens I have to reconnect to internet (it doesn't work all the time, I usually have to do it two times for it to work), and then again after a few minutes the connection dies. Tried restarting my computer, tried restarting the modem, tried the troubleshooting network thing (it keeps saying "Local Area Connection doesn't have a valid IP configuration", but gives no solution). Also, I tried connecting on my cellphone and on a laptop and both of those work. However, those connect through WiFi, while my PC is connected through an ethernet cable[code]
View 4 Replies View RelatedInternet Connection Via Ethernet Card Constantly Crashing
Oct 13, 2012As of around a week ago, I've been experiencing a strange thing with my internet connection. I live in apartments that provide internet to everyone that lives there, and had been living here for a few months before this started happening.I now constantly have my internet crashing in the middle of browsing/gaming. I will either open up my laptop to the internet not working already, or it will work, but crash randomly while I am using it.
Trying to load a page on google chrome, it will show a message saying DNS Lookup Failed, and an icon will pop up in the right corner of my screen with a yellow (!) triangle. If I hover over it, it will say no internet access.I've followed the few steps they had on there, but none of them worked. I've never had a problem like this before, and haven't made any modifications to anything on my computer lately, so I am pretty confused as to why this is happening. I know it is something on my end, because my roommate's internet is just fine, and even used my ethernet cord on her computer, and no problems at all.
Ethernet RJ45 Port - Two Different Internet Connection To One Equipment?
Nov 16, 2012I have an telemetry equipment which have one ethernet RJ45 port, so I have an internet connection and I can connect to this device remotely using a browser on my PC for security reason I want to feed this device with a second internet connection that is coming from a cellular line , can I just put the two different Internet cables into a switch and from that switch connect my device?
View 1 Replies View RelatedTurn Wireless Internet Into Ethernet Connection Using Laptop
Dec 8, 2012I was wondering if there was any way i could have the wireless connection go in to my laptpop then have the laptop convert it to an ethernet connection that i could then run to my ps3.
View 2 Replies View RelatedD-Link DIR-655 :: Won't Allow Laptop To Connect To Internet Through Ethernet Connection
Feb 7, 2011My D-Link won't allow my laptop to connect to the Internet through an Ethernet connection. I set up the router using a standard Ethernet patch cable and cloned the laptop's MAC address to connect through the Mediacom modem. I then decided to test out the wireless and got that all set up, works perfect. Now I cannot connect to the Internet using the Ethernet cable.
View 1 Replies View RelatedD-Link DIR-615 :: Can't See Ethernet Connections
Feb 15, 2012I come home from work on my lunch break to discover that my dog spilled her food on my router and I'm pretty sure thats how she discovered that cat5 cables are fun to saw on with her teeth, she chewed clean through 4 of them...she also chewed through the power cable and somehow cheated death in that regard.
After repairing and crimping all ethernet cables and substituting a brand new one for good measure, the DIR-615 will not see any ethernet connections, ie the lights on the front do not come on when the cable is plugged in, however I plugged my internet Cat5 into it and the little globe lights up saying that it is getting the internet. The wireless works fine as I connected to it with my phone. I know I repaired the cables properly but to rule that out I have used a brand new un-chewed cable and the router won't see that either. Is it possible that something was fried when the dog chewed through the power cable?
Multiple Connections Via One Ethernet Port?
Feb 19, 2013The ethernet ports across the entire campus including the halls all host multiple networks via one port. I connect to the port and I get one connection, and my friend connects to get a second connection through the same port, and a third person connected via the same port to get yet another connection. I think there may be 4 connections being hosted through this in total. Now, the university have 3 main streams of internet: 1 for Staff/postgrad, 1 for students, 1 for exchange students. The fourth connection type is intranet with only access to a portal. The purpose of the portal is to submit your mac address for wireless and ethernet to be assigned an IP address for both. The issue we are having is my friend needs to connect to the exchange students connection for actual internet access, but the ethernet cable will only connect her to the portal (all her details have been submitted). I have cycled through every window in the networking control panel and usually issues like this I can resolve within a couple of hours but how to identify other networks that are available through ethernet.
View 3 Replies View RelatedWNDR3700 - Any Way To Team 2 Ethernet Connections With DD-WRT?
Sep 7, 2012I just installed an HP nc360T into my home server, and I want to use both ethernet ports to get double the speed of a single 1gbt connection. Is there a way I can team 2 ethernet connections with DD-WRT? My router is the WNDR3700
View 4 Replies View RelatedBridge Internet Connection Received From Laptop To Desktop With An Ethernet Cable
Apr 13, 2011I am trying to bridge internet connection received from my laptop to my desktop with an ethernet cable. Both machines are running win 7.When I try to connect to my local area connection on the desktop most of the time it fails and I'm left with 'Unidentified network' and no internet connection. Sometimes, rarely it does connect properly but I get a notification about there being an IP conflict in the network, but things work as they should.When I diagnose the problem it tells me that "Local Area Connection doesn't have a valid IP configuration"
View 5 Replies View RelatedADSL Wireless Router Configuration With Ethernet (rj45) Internet Connection?
Dec 2, 2012I have this adsl wireless router but my internet connection only has RJ45 directly connected to my PC. My questions is how can I use my ADSL wireless router with this kind of internet connection.. because I really want to make my connection wireless..
View 1 Replies View RelatedWireless Network And Ethernet Connections Not Working?
Jul 28, 2012My computer is a Dell Inspiron with Windows 7 Home Premium Service Pack 1. A few weeks ago, it stopped working and would not let me log in. I fixed that problem by launching Setup and downloading the Windows 7 installation from a jump drive. The new problem is that I cannot connect to the internet at all. My wireless connections will not show up and when I hook up my ethernet cord, it will not show up either.
View 10 Replies View RelatedHow To Setup Multiple Ethernet Connections In Windows 7
Jul 16, 2011I have to connect/switch to two different ips different gateways, can I possibly keep two set of ips always ready.
View 1 Replies View RelatedBelkin Router With Multiple Ethernet Connections?
May 1, 2012I have a belkin router that I've been using to share internet connectivity with several devices around my home. It has happily supplied this to an Ethernet connected desktop, Ethernet connected Blu-ray player, and wireless connections to two seperate laptop computers. When I try to add one more Ethernet (wired) connection to the mix, I always run into problems. Although the router has 4 outgoing Ethernet ports, it doesn't like to do more than two. Should I buy a new router? Cables?
View 4 Replies View RelatedDell :: DG834G Ethernet And Wireless Connections
Oct 26, 2011I have a Netgear DG834G ADSL2 Modem/Router. I am currently connected through a wired network connection and wireless. With both forms of connection active does my Dell XPS give priority to the wired connection or the wireless connection if wireless is enabled?
View 1 Replies View RelatedEthernet Not Showing Up In Device Manager Or Network Connections
Feb 4, 2011My Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"
View 1 Replies View RelatedHome Network :: Using Both Wireless And Wired Ethernet Connections On Laptop
Aug 17, 2011I have some servers running in my office and I have hooked them to a wireless router. I want to access those servers from my work laptop. At this time, I have to disconnect from my company network and assign static IP to wireless interface to access those servers. is there a way to configure my laptop so that i can be hooked to my company network through wired interface and can access my servers through wireless interface which is configured with static IP
View 9 Replies View RelatedLinksys Wireless Router :: E3000 Won't Display Ethernet Connections?
Sep 9, 2012I installed dd-wrt latest for this router but it wont show any connections to the ports. I can connect to the router with my internet port connected to the computer but that is it. I tried connecting the modem to a port connection and it showed connected. I'm confused as the firmware loaded fine. May be I went over my abilities which is usually the case.
View 1 Replies View RelatedCisco Wireless :: What Type Of Mini-GBICS Should Used For RJ45 Ethernet Connections
Feb 7, 2013What type of Mini-GBICS should I used for RJ45 ethernet connections for my 4402 Wireles Lan Controller? Should I use the GLC-T SFP? Is it the right one? aAso is Mini-Gbics a industry standard which means I can use any brand of Mini-GBIC for this Connection like Dell Brand Dlink or Others.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G2 - Connect Ethernet Switch (for Hardwired Connections)?
Dec 29, 2011In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
Linksys Wireless Router :: E1200 Changing Out Ethernet Cables / Checking Connections
Apr 25, 2012ISP : Charter Communications
Modem : Motorola SURFboard SB6121
Router : Linksys E1200
I started out installed on the CD and then I kept getting messages about not being set up and finally it kicked me out. So I started out with the basics, changing out ethernet cables and checking connections. I then tried cycling the modem, router, computer and still no go. As soon as I plug the modem straight back into the computer it kicks back on. So then I tried some other trouble shooting ideas on the forums with the last being MAC address clone, save changes, release renew IP, and finally another round of cycling and I still can't get it to work.
Linksys Wired Router :: E2000 - Security Wired Ethernet Connections
Sep 19, 2011I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
View 1 Replies View RelatedUnable To See Connection (router VWR-VD) Under Connections
Dec 21, 2011Im having trouble connecting to my router, everything was working fine till two weeks ago, I have a Vonage D-Link router model: VWR-VD and and have 3 computers, 2 desktops and 1 Laptop. one desktop is connected directly to the router and works fine, the laptop is connected wireless and it works fine too. the other desktop has a Realtek 8185 extensive 802.11 bg wireless devise VEN 10EC / DEV 8185. the computer was working fine till 2 weeks ago that I don't know what happened but now I'm able to see other connections but not my connection (my router). on the task bar when I click on the bars for my connection, my connection does not appear.I've tried the following: Reinstall the Driver reset IP I tried to change the homegroup, but I couldent due to the fact that I'm not connected?
View 8 Replies View RelatedNo Wireless Connection Listed In Network Connections
Mar 2, 2012I recently had to reinstall Windows XP on my Panasonic Toughbook but when I did, I now don't have any way of getting a wireless internet connection. I don't see the wireless card in the hardware list and there's no wireless connection listed in the network connections. (This laptop came with Vista Business but I wanted XP since I'm more familiar with it.)
View 1 Replies View Related