D-Link DIR-615 :: Can't See Ethernet Connections

Feb 15, 2012

I come home from work on my lunch break to discover that my dog spilled her food on my router and I'm pretty sure thats how she discovered that cat5 cables are fun to saw on with her teeth, she chewed clean through 4 of them...she also chewed through the power cable and somehow cheated death in that regard.

After repairing and crimping all ethernet cables and substituting a brand new one for good measure, the DIR-615 will not see any ethernet connections, ie the lights on the front do not come on when the cable is plugged in, however I plugged my internet Cat5 into it and the little globe lights up saying that it is getting the internet.  The wireless works fine as I connected to it with my phone.  I know I repaired the cables properly but to rule that out I have used a brand new un-chewed cable and the router won't see that either.  Is it possible that something was fried when the dog chewed through the power cable?

View 2 Replies


ADVERTISEMENT

Split A Single 4 - Pair Ethernet Connection Into Two 2 - Pair Ethernet Connections

Dec 28, 2011

I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b

Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.

View 2 Replies View Related

Multiple Connections Via One Ethernet Port?

Feb 19, 2013

The ethernet ports across the entire campus including the halls all host multiple networks via one port. I connect to the port and I get one connection, and my friend connects to get a second connection through the same port, and a third person connected via the same port to get yet another connection. I think there may be 4 connections being hosted through this in total. Now, the university have 3 main streams of internet: 1 for Staff/postgrad, 1 for students, 1 for exchange students. The fourth connection type is intranet with only access to a portal. The purpose of the portal is to submit your mac address for wireless and ethernet to be assigned an IP address for both. The issue we are having is my friend needs to connect to the exchange students connection for actual internet access, but the ethernet cable will only connect her to the portal (all her details have been submitted). I have cycled through every window in the networking control panel and usually issues like this I can resolve within a couple of hours but how to identify other networks that are available through ethernet.

View 3 Replies View Related

Get 2 Internet Connections On One Ethernet Connection?

Dec 2, 2012

How can I get 2 internet connections for 2 in home computers from 1 cable internet connection.

View 1 Replies View Related

WNDR3700 - Any Way To Team 2 Ethernet Connections With DD-WRT?

Sep 7, 2012

I just installed an HP nc360T into my home server, and I want to use both ethernet ports to get double the speed of a single 1gbt connection. Is there a way I can team 2 ethernet connections with DD-WRT? My router is the WNDR3700

View 4 Replies View Related

Wireless Network And Ethernet Connections Not Working?

Jul 28, 2012

My computer is a Dell Inspiron with Windows 7 Home Premium Service Pack 1. A few weeks ago, it stopped working and would not let me log in. I fixed that problem by launching Setup and downloading the Windows 7 installation from a jump drive. The new problem is that I cannot connect to the internet at all. My wireless connections will not show up and when I hook up my ethernet cord, it will not show up either.

View 10 Replies View Related

How To Setup Multiple Ethernet Connections In Windows 7

Jul 16, 2011

I have to connect/switch to two different ips different gateways, can I possibly keep two set of ips always ready.

View 1 Replies View Related

Belkin Router With Multiple Ethernet Connections?

May 1, 2012

I have a belkin router that I've been using to share internet connectivity with several devices around my home. It has happily supplied this to an Ethernet connected desktop, Ethernet connected Blu-ray player, and wireless connections to two seperate laptop computers. When I try to add one more Ethernet (wired) connection to the mix, I always run into problems. Although the router has 4 outgoing Ethernet ports, it doesn't like to do more than two. Should I buy a new router? Cables?

View 4 Replies View Related

Dell :: DG834G Ethernet And Wireless Connections

Oct 26, 2011

I have a Netgear DG834G  ADSL2 Modem/Router.  I am currently connected through a wired network connection and wireless.  With both forms of connection active does my Dell XPS give priority to the wired connection or the wireless connection if wireless is enabled?

View 1 Replies View Related

Ethernet Not Showing Up In Device Manager Or Network Connections

Feb 4, 2011

My Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"

View 1 Replies View Related

Home Network :: Using Both Wireless And Wired Ethernet Connections On Laptop

Aug 17, 2011

I have some servers running in my office and I have hooked them to a wireless router. I want to access those servers from my work laptop. At this time, I have to disconnect from my company network and assign static IP to wireless interface to access those servers. is there a way to configure my laptop so that i can be hooked to my company network through wired interface and can access my servers through wireless interface which is configured with static IP

View 9 Replies View Related

Linksys Wireless Router :: E3000 Won't Display Ethernet Connections?

Sep 9, 2012

I installed dd-wrt latest for this router but it wont show any connections to the ports.  I can connect to the router with my internet port connected to the computer but that is it.  I tried connecting the modem to a port connection and it showed connected.  I'm confused as the firmware loaded fine.  May be I went over my abilities which is usually the case.

View 1 Replies View Related

Cisco Wireless :: What Type Of Mini-GBICS Should Used For RJ45 Ethernet Connections

Feb 7, 2013

What type of Mini-GBICS should I used for RJ45 ethernet connections for my 4402 Wireles Lan Controller? Should I use the GLC-T SFP? Is it the right one? aAso is Mini-Gbics a industry standard which means I can use any brand of Mini-GBIC for this Connection like Dell Brand Dlink or Others.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 - Connect Ethernet Switch (for Hardwired Connections)?

Dec 29, 2011

In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
 
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
 
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.

View 2 Replies View Related

Linksys Wireless Router :: E1200 Changing Out Ethernet Cables / Checking Connections

Apr 25, 2012

ISP : Charter Communications
Modem : Motorola SURFboard SB6121
Router : Linksys E1200
 
I started out installed on the CD and then I kept getting messages about not being set up and finally it kicked me out. So I started out with the basics, changing out ethernet cables and checking connections. I then tried cycling the modem, router, computer and still no go. As soon as I plug the modem straight back into the computer it kicks back on. So then I tried some other trouble shooting ideas on the forums with the last being MAC address clone, save changes, release renew IP, and finally another round of cycling and I still can't get it to work.

View 4 Replies View Related

D-Link DIR-655 :: How To Link 2 Routers Wirelessly With 2 Different Connections

Dec 26, 2011

The 2 routers are Di-524UP and Dir-655.I have 2 routers and 2 modems,Computer 1 and and 2 are running on the same router as they have low internet usage.Computer usually does large amount of downloading and streaming and requires a separate connection as not to lag the browsing for computer 1 and 2.How could I link router 1 and 2 together so that my computer 3 could deposit files that are downloaded over the internet through wireless lan into my NAS.Or are there any devices that can bridge 2 routers with 2 different network connections over the same lan network.

View 3 Replies View Related

Linksys Wired Router :: E2000 - Security Wired Ethernet Connections

Sep 19, 2011

I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive.  I am planning to allow a tenant in another building connect via an ethernet cable connected to my router.  Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router?  I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.

View 1 Replies View Related

D-Link :: DIR 615 - Wi-Fi Connections

Jun 2, 2012

Past few days I've been having problems with my WiFi connections. the modem connection to my desktop works fine.. i called the isp guy to fix it.. he did something to my roommates laptop and the WiFi works on it.. but any other device trying to connect to the WiFi connection doesn't seem to get the net.

As in like if i try to connect to the WiFi connection from my phone it shows that iv been connected to it but i cannot open anything.. no internet browser page, no fb, no whats app, no play store.. Nothing.. what could be the problem.. it was working fine a week back.. don't no what could have changed? and there is no problem with my phone.. cause i tested it to another WiFi connection as well.

View 3 Replies View Related

Tp-link TL-WN321G - No Connections Available

Oct 27, 2012

just bought a new monitor and graphic card (nvidia gtx 650), proceeded to install it, then installed the drivers. Now that my pc is much more good looking, i can't connect to internet anymore I'm writing this from my netbook, so my router works just fine. I tried to reinstall the graphic card videos, downloading the latest ones, and the drivers of my wireless usb adapter aswell (it's a tp-link TL-WN321G). I had no success, my pc still doesn't see any connection. I didn't find by googling many other examples of people unable to connect to internet after installing nvidia drivers.

View 5 Replies View Related

D-Link DIR-601 :: Keeps Dropping VPN And Ssh Connections

Nov 23, 2011

I just set up a new DIR-601.Now, whenever I make a VPN or ssh connection, it gets dropped, always after about 3 minutes.

View 6 Replies View Related

Link 3 Different Places Where 2 Of Them Have Internet DSL Connections

Jul 24, 2012

how to link 3 different places where 2 of them have internet DSL connections.Actually Im running this layout...

Place 1:
DSL Modem connected to "Router 1" with DHCP Enabled. 192.168.1.1 and static IP assigned for every element in the network.
"Router 1" got this:
LAN:
2 computers

[code]....

At this point everything is working fine. Computers in "Place 1" can see computers in "Place 2" over network and share files and printers. Plus "Place 2" have internet from "Place 1".I want now to link "Place 2" to a "Place 3" using the same Nanostation M5 antennas and I can do it the same way I did Place1-Place2, BUT, what about "Place 3" router? it is connected to a DSL modem. "Router 3" should be DHCP Disabled too? What about the internet connection? I would like "Place 2" in the middle would be able to take the internet connection from both Place 1 - Place 3. It can be done keeping computers sharing files and folders between all 3 places?

View 2 Replies View Related

D-Link DIR-615 :: Supports Only 32 Simultaneous Connections?

May 28, 2011

Today I read a comment on a review of DIR-615 [URL], saying it supports only 32 concurrent connections where as other routers support more than 200  

View 6 Replies View Related

D-link Dir-615 :: Multiple Connections On Wifi

Nov 6, 2011

When I connect 2 laptops to my router, why does the speed/connection get split? I would understand that if the speed was maxed out or something but it's a lame 500 kb/s connection. Do all wify routers behave this way? It's kind of annoying since there's a trafic quota limit implemented and when someone downloads, the other one can't do s^&t? how to handle this?

View 8 Replies View Related

D-Link DIR-655 :: TG784 Can't Support Many Connections

Nov 14, 2012

Just bought a D-link DIR-652 to connect to my ISP router TG784 to manage all the connections.because the TG784 can't support many connections.yesterday I could make it till teh laptop connects via ethernet cable to the dir-652 router. but couldn't make it work wireless.have to say that my login password to the TG784 website is changed. user is "Administrator" as default.

View 14 Replies View Related

D-Link DIR-655 :: How To Remove Unused Connections

Jan 13, 2012

On the STATUS page there are addresses assigned to several devices no longer in use.  How do I remove these?

View 8 Replies View Related

D-Link DIR-655 :: Keeps Dropping Wireless Connections?

Aug 22, 2011

I've got a DIR-651 that does one of two things regularly:

1--drops all wireless connections momentarily, then re-establishes them (happens multiple times a day)

2--drops all wireless connections and has to be reset (happens every 0.5-2 days)

#1 wouldn't be a big deal, except that I keep VPN connections on two systems and have to re-establish them every time this happens.  I should probably also note that this happens even on the weekends, when those two systems are not VPN'd in.

It has done this since day 1, and the firmware update did not work.

What HW version is your router? A1 What FW version is currently loaded? 1.01NA

What ISP Service do you have? Cable What ISP Modem do you have? Stand Alone What ISP Modem make and model do you have? Scientific Atlanta 2203C

Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? done Turn off QoS options. done Turn off Advanced DNS Services if you have this option. done Turn on DNS Relay under Setup/Networking. done Setup DHCP reserved IP addresses for all devices on the router. done Ensure devices are set to auto obtain an IP address. done Set Firewall settings to Endpoint Independent for TCP and UDP. done

What wireless modes are you using? mixed B/G What security mode are you using? WPA-Personal What wireless devices do you have connected? 3 laptops, 1 desktop, 2 Blackberries, 1 printer Any cordless house phones? yes, DECT 6.0.  Did not interfere with previous Netgear or 2Wire routers. Any other WiFi routers in the area? up to 5 others, but they are all far away and my house has thick stone exterior walls

View 7 Replies View Related

D-Link DIR-655 :: Two Wireless Connections At The Same Time?

Aug 13, 2011

My kid is heading off to college with a Toshiba Satellite E-205 laptop and a Kodak ESP Office 2150 printer. She would like to use the wireless printer option on the Kodak, which requires a wireless router. I have a D-Link DIR-655 wireless router that I can send with her.

I know her university has a very robust wireless system for Internet access, so she is going to want to use their wireless access.

So, the DIR-655 sole use will be to allow access to the printer. It will not be accessing the Internet or be cabled into the university's network.

Is it possible to operate TWO wireless connections at the same time so she can hit her university wireless and the DIR-655 so she can print wirelessly?

how do I configure the laptop and the DIR-655 to allow this kind of access?

View 2 Replies View Related

D-Link DIR-601 / Multiple Connections With Wireless LAN Without Networking?

Nov 9, 2011

what I want to do is setup a Tablet for use and share my one Internet connection with it and my desktop. I do not want the desktop and the Tablet networked with each other. there is a Tablet on Newegg: Velocity Micro Cruz Reader R103. the details say it's communication is 802.11b/g Wireless LAN. so I copy and paste that on Newegg and get: D-Link DIR-601 Wireless Broadband Router. not sure if that's what i need or what the configuration would be but I kind of know how to set it up.my question is can I connect a Desktop and a Tablet or any PC device to a router like this with out networking the individual units with each other? just to where it serves as more a splitter. is there any wireless alternatives to only "split" the Internet connection and not network the desktop and Tablet?

View 3 Replies View Related

Tp-link Adapter - Cannot Connect To Wifi Although Connections Available

Dec 11, 2011

I have been using a TP-Link wifi adapter for last two months, It worked flawlessly till a couple of days ago. It just so happened that i turned on my computer and even though the wifi connections were available, when trying to connect this message keeps showing up " Windows was unable to connect to UoC WiFi". I have tried everything from making a new wifi connection to changing usb-ports

FYI I use the same wifi connection on my netbook and android, and they are working fine, so it's definitely not a problem with the ISP.

[code]....

View 7 Replies View Related

TP-Link WN722N Not Showing In Connections Menu?

Nov 23, 2011

Just bought myself a TP-Link WN722N Wirless Adapter. Currently I have a Netgear WNA3100 connected which works fine but I to use the TP-Link to connect to a second network simultaneously.Here's the problem.The drivers installed just fine for the TP-Link adapter. Windows shows that its connected as a USB device (USB2.0 WLAN) and Network & Sharing Centre shows it is being "Wireless Network Connection 4"(The Netgear one shows as "Wireless Network Connection 2")However, when i try to use the TP-Link one to connect to a network, it doesn't show up in the "Network Connections" menu on the Taskbar, and when i disconnect the Netgear one it says that it can't find any wireless connections at all; note that "Network & Sharing Centre" still shows the TP-Link Adapter as being connected to the PC).Tried Reinstalling the TP-Link Software, updating it, etc. Restarted PC. Disabled Netgear connection. Physically Disconnected Netgear Adapter and still no luck.

View 2 Replies View Related

D-link Dir-655 :: Wifi Connections Dropped Periodically

Mar 5, 2011

My DIR-655 drops WiFi connections every few days.  All wired connections are fine.  Rebooting the router fixes the problem at that time.  Cable modem works perfectly fine. [code]

I'm sure I'm missing some devices, but that should give you the general mix of wired/wireless devices that I use.  I'm single with visits from my son every other weekend, so network traffic is not that high at my house.  I've had this router for a couple years now and didn't use to have this problem.  I've been updating the firmware, and I suspect this problem happened after on one those updates.  I just don't know which one.  Also, I didn't use to have any neighbors with Wireless Routers (that I could detect), but recently there have been 2 who have gotten them.  I was hoping this was a problem that D-Link was aware of, but that does not seem to be the case.  I would hate to have to go out and buy a new router (not D-Link).

View 14 Replies View Related

D-Link DIR-655 :: Dropping Wired And Wireless Connections?

Feb 8, 2013

After 5 years of services my DIR-655 begun acting up yesterday; first of it begun by getting REALLY slow, it could take up to 25 seconds to login into the software and up to 30+ seconds just going from one menu to another, on some instances connection (wired) to the router was lost. This morning it started dropping all connections, wired or not; first my iphone then my WDTV, after that it's been pretty much random connections. On one given moment wired works but not wireless, then wireless works but not wired and sometimes I get both but for 3 or 4 minutes.I've reset the router to factory settings, plugged/unplugged, changed cables, network adapters on desktops and the problem persists.

DIR-655 A2
FW: 1.35
Connection: ADSL

View 2 Replies View Related

D-Link DIR-655 :: Connections Dropping To DSL-526B Because Of Torrents

Jan 17, 2012

my configuration; ADSL2+ @ 21Mbps comes in via Telstra. Fibre optic cable trunk to main road, copper to the house, total distance 246m, hence good speeds. The phone is connected to a dual port filter with a phone and fax connected through double adapter to one port, and DSL-526B connected to other port.DSL-526B connected to DIR-655 Hardware A4, firmware 1.30. The two are set up in bridge mode, with a static IP. The DIR-655 connects to a DGS-1016D and a DGS-1008.I am running WIndows 7 ultimate x64 w/8GB ram, I5-2500K, and all MS patches.

four days ago I reinstalled my windows system. At that time, I uninstalled Tablet PC components and Windows search. I use FreeDownload Manager for my download needs, and it includes a BitTorrent client. I installed the latest version.From that point on, whenever I download any torrents the connnection to the internet resets and takes about 1 - 3 minutes to re-establish itself. I have tried going back through the several versions of the program to get back to the version I was running before I re-installed all to no avail.

I replaced the cable between wall socket and filter, replaced filter, replaced phone cable, also to no avail. I have tweaked the program settings now with only three half open connections, and I've reset the modem donezn of times. I've reset the DIR-655, and done factory resets on both and reconfigured them. Nothing has worked. I use MAC address filtering and I have ACLS which block access to various sites because of kids, and I use OpenDNS web content filtering too.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved