D-Link DIR-655 :: How To Link 2 Routers Wirelessly With 2 Different Connections
Dec 26, 2011
The 2 routers are Di-524UP and Dir-655.I have 2 routers and 2 modems,Computer 1 and and 2 are running on the same router as they have low internet usage.Computer usually does large amount of downloading and streaming and requires a separate connection as not to lag the browsing for computer 1 and 2.How could I link router 1 and 2 together so that my computer 3 could deposit files that are downloaded over the internet through wireless lan into my NAS.Or are there any devices that can bridge 2 routers with 2 different network connections over the same lan network.
View 3 Replies
ADVERTISEMENT
Aug 7, 2011
how do you connect the router.
View 1 Replies
View Related
Oct 31, 2011
I'm currently using an orange livebox which has been pretty reliable in the past. My set up is livebox > homeplug > homeplug > linksys wireless router > into 2 pcs.Its odd because my pcs have trouble detecting the wireless router, however my laptop can link up no problems.I have plugged my laptop directly into the livebox via ethernet and it works fine so I can rule out the livebox. I've also swapped the cables and they all work ok.Basically, it does link up intermittently and runs perfectly, but then after a day, or even 10 minutes it disconnects and I have a nightmare getting it to work again. I went through the entire cable system and got right to the end and hey presto it all worked...so I plugged my pcs back in. Then after about 10 mins it lost the network connection and I couldnt even link up to the livebox router by keying in 192.168.1.1. The laptop CAN connect wirelessy and access the config pages.
View 2 Replies
View Related
Dec 16, 2008
Im having trouble connecting my iPhone wirelessly using my 615 router. The iPhone sees the router, but cannot connect to it using the router password that i have.
View 8 Replies
View Related
Dec 28, 2010
Any way to force the router to communicate wirelessly at only 1 or 2 Mbit/sec? I am having trouble connecting to another device, not made by Dlink, and their technical support suggested testing at a lower data rate.
View 1 Replies
View Related
Mar 19, 2012
Samsung TV (ue40d5520) connected wirelessly to a D-link dir-615, (Virgin Media)? Sometimes connects and works just fine, hours later it wont even find the router, then in might connect to router but not internet, sometimes says cannot connect due to network inteference... Got a decent signal strength, changed router to channel 11 to stop some interference with others in the neighborhood.My laptop and phone connect to the router fine every time.
View 4 Replies
View Related
Sep 7, 2012
I have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies
View Related
Mar 1, 2013
I have the firmware 2.10NA. In my home we have about 4 laptops and 4 smartphones connecting to this router wirelessly and 3 of the laptops often lose connection for hours. We have tried unplugging the router and plugging it in again and factory reset and also resetting it through the IP address but the connection doesnt come back. Recently it has gone out for about 3 hours now. Also the wireless LED icon on the router constantly blinks is this normal? On the laptops where theres no connection it says limited connectivity. Is it possible that there is too many devices connected to the router or something. or could this be a problem with the laptops and not the router?
View 6 Replies
View Related
Jul 29, 2012
i have never managed to work out how to connect wirelessly , step by step to do this? is there any reason why the d link router might be incompatible with this model of laptop?
View 14 Replies
View Related
Jan 6, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmwar Version :
ISP : AT&T
I recently got a new modem from AT&T. I hooked it up and everything worked fine for a few days. Last night some friends came over with their wireless devices (iphone, ipad) and after a while, the internet got really slow. Then it was unresponsive but it said that we were still connected to the network. So I decided to restart the router. Once it was finished rebooting, we were not even able to connect to the network at all. Even on my computer downstairs I was not able to connect wirelessly. I am connected via ethernet from the router right now on my computer upstairs and that is working fine. I have tried rebooting the router to factory settings, unplugging the modem, rebooting the modem, unplugging the modem, changing the router settings, pretty much every practical solution for simple connectivity issues.
View 1 Replies
View Related
Jul 24, 2012
using an Airport Express to stream itunes music wirelessly? I'm able to get the AE setup and can stream for about 30 minutes but then it can't be found. I'm assuming the 655 is kicking it off. I've tried changing settings on the 655 but nothing seems to make any difference. I'm able to use an Apple TV/iPhone/iPad with no issues.
View 14 Replies
View Related
Feb 9, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.00
ISP : Tiscali/Talktalk
I have just bought and setup this router, Wired connection working fine, Problem is no devices seem to connect to wireless, my other PC, phone etc find the router with strong signal, I enter the key but nothing happens. I tried with my phone and stood next to the router and it connected but dropped out when I walked a few feet away.
View 6 Replies
View Related
Mar 23, 2013
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12
My router is not working wireless. Just stopped working. I hadn't touched anything in the settings. Nothing is picking up it's signal. All the lights are on saying that it SHOULD be working!I checked all the settings and they were as before. I have unplugged it and restarted, I have reset to factory settings and set it back up again but nothing! Works fine on the wire.
View 4 Replies
View Related
Jul 21, 2011
So our last router (Linksys) quit on us the other day so we got this one. We plug it in and it works most of the time, but the connection drops out periodically. Also, for some reason, I am now unable to connect to Xbox Live using my laptop as a router (plugging the ethernet cable from my xbox to my laptop). Also, when I plag it in, the internet stops working on my laptop and I have to restart it to get it to work again.
View 1 Replies
View Related
Sep 22, 2012
recently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
View 2 Replies
View Related
Mar 29, 2013
Region : Indonesia
Model : TD-W8151N
Hardware Version : V3
Firmware Version :
ISP :
Recently I bought TD-W8151N wireless adsl router, I have one desktop computer that connected to TD-W8151N via ethernet and wirelessly to one laptop, IP Addr: 192.168.1.4, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : desktop (LAN connection IP Addr: 192.168.1.3, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : laptop (wireless connection) but I can't ping each other and also can't access the share folders between them., both computers can access internet. Is there anything I missed the configuration setting of the router? Before I use wireless, I connected this 2 computers using cross-type utp cable, and working good.
View 5 Replies
View Related
Jun 2, 2012
Past few days I've been having problems with my WiFi connections. the modem connection to my desktop works fine.. i called the isp guy to fix it.. he did something to my roommates laptop and the WiFi works on it.. but any other device trying to connect to the WiFi connection doesn't seem to get the net.
As in like if i try to connect to the WiFi connection from my phone it shows that iv been connected to it but i cannot open anything.. no internet browser page, no fb, no whats app, no play store.. Nothing.. what could be the problem.. it was working fine a week back.. don't no what could have changed? and there is no problem with my phone.. cause i tested it to another WiFi connection as well.
View 3 Replies
View Related
Oct 27, 2012
just bought a new monitor and graphic card (nvidia gtx 650), proceeded to install it, then installed the drivers. Now that my pc is much more good looking, i can't connect to internet anymore I'm writing this from my netbook, so my router works just fine. I tried to reinstall the graphic card videos, downloading the latest ones, and the drivers of my wireless usb adapter aswell (it's a tp-link TL-WN321G). I had no success, my pc still doesn't see any connection. I didn't find by googling many other examples of people unable to connect to internet after installing nvidia drivers.
View 5 Replies
View Related
Nov 23, 2011
I just set up a new DIR-601.Now, whenever I make a VPN or ssh connection, it gets dropped, always after about 3 minutes.
View 6 Replies
View Related
Feb 15, 2012
I come home from work on my lunch break to discover that my dog spilled her food on my router and I'm pretty sure thats how she discovered that cat5 cables are fun to saw on with her teeth, she chewed clean through 4 of them...she also chewed through the power cable and somehow cheated death in that regard.
After repairing and crimping all ethernet cables and substituting a brand new one for good measure, the DIR-615 will not see any ethernet connections, ie the lights on the front do not come on when the cable is plugged in, however I plugged my internet Cat5 into it and the little globe lights up saying that it is getting the internet. The wireless works fine as I connected to it with my phone. I know I repaired the cables properly but to rule that out I have used a brand new un-chewed cable and the router won't see that either. Is it possible that something was fried when the dog chewed through the power cable?
View 2 Replies
View Related
Jul 24, 2012
how to link 3 different places where 2 of them have internet DSL connections.Actually Im running this layout...
Place 1:
DSL Modem connected to "Router 1" with DHCP Enabled. 192.168.1.1 and static IP assigned for every element in the network.
"Router 1" got this:
LAN:
2 computers
[code]....
At this point everything is working fine. Computers in "Place 1" can see computers in "Place 2" over network and share files and printers. Plus "Place 2" have internet from "Place 1".I want now to link "Place 2" to a "Place 3" using the same Nanostation M5 antennas and I can do it the same way I did Place1-Place2, BUT, what about "Place 3" router? it is connected to a DSL modem. "Router 3" should be DHCP Disabled too? What about the internet connection? I would like "Place 2" in the middle would be able to take the internet connection from both Place 1 - Place 3. It can be done keeping computers sharing files and folders between all 3 places?
View 2 Replies
View Related
May 28, 2011
Today I read a comment on a review of DIR-615 [URL], saying it supports only 32 concurrent connections where as other routers support more than 200
View 6 Replies
View Related
Nov 6, 2011
When I connect 2 laptops to my router, why does the speed/connection get split? I would understand that if the speed was maxed out or something but it's a lame 500 kb/s connection. Do all wify routers behave this way? It's kind of annoying since there's a trafic quota limit implemented and when someone downloads, the other one can't do s^&t? how to handle this?
View 8 Replies
View Related
Nov 14, 2012
Just bought a D-link DIR-652 to connect to my ISP router TG784 to manage all the connections.because the TG784 can't support many connections.yesterday I could make it till teh laptop connects via ethernet cable to the dir-652 router. but couldn't make it work wireless.have to say that my login password to the TG784 website is changed. user is "Administrator" as default.
View 14 Replies
View Related
Jan 13, 2012
On the STATUS page there are addresses assigned to several devices no longer in use. How do I remove these?
View 8 Replies
View Related
Aug 22, 2011
I've got a DIR-651 that does one of two things regularly:
1--drops all wireless connections momentarily, then re-establishes them (happens multiple times a day)
2--drops all wireless connections and has to be reset (happens every 0.5-2 days)
#1 wouldn't be a big deal, except that I keep VPN connections on two systems and have to re-establish them every time this happens. I should probably also note that this happens even on the weekends, when those two systems are not VPN'd in.
It has done this since day 1, and the firmware update did not work.
What HW version is your router? A1 What FW version is currently loaded? 1.01NA
What ISP Service do you have? Cable What ISP Modem do you have? Stand Alone What ISP Modem make and model do you have? Scientific Atlanta 2203C
Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? done Turn off QoS options. done Turn off Advanced DNS Services if you have this option. done Turn on DNS Relay under Setup/Networking. done Setup DHCP reserved IP addresses for all devices on the router. done Ensure devices are set to auto obtain an IP address. done Set Firewall settings to Endpoint Independent for TCP and UDP. done
What wireless modes are you using? mixed B/G What security mode are you using? WPA-Personal What wireless devices do you have connected? 3 laptops, 1 desktop, 2 Blackberries, 1 printer Any cordless house phones? yes, DECT 6.0. Did not interfere with previous Netgear or 2Wire routers. Any other WiFi routers in the area? up to 5 others, but they are all far away and my house has thick stone exterior walls
View 7 Replies
View Related
Aug 13, 2011
My kid is heading off to college with a Toshiba Satellite E-205 laptop and a Kodak ESP Office 2150 printer. She would like to use the wireless printer option on the Kodak, which requires a wireless router. I have a D-Link DIR-655 wireless router that I can send with her.
I know her university has a very robust wireless system for Internet access, so she is going to want to use their wireless access.
So, the DIR-655 sole use will be to allow access to the printer. It will not be accessing the Internet or be cabled into the university's network.
Is it possible to operate TWO wireless connections at the same time so she can hit her university wireless and the DIR-655 so she can print wirelessly?
how do I configure the laptop and the DIR-655 to allow this kind of access?
View 2 Replies
View Related
Nov 9, 2011
what I want to do is setup a Tablet for use and share my one Internet connection with it and my desktop. I do not want the desktop and the Tablet networked with each other. there is a Tablet on Newegg: Velocity Micro Cruz Reader R103. the details say it's communication is 802.11b/g Wireless LAN. so I copy and paste that on Newegg and get: D-Link DIR-601 Wireless Broadband Router. not sure if that's what i need or what the configuration would be but I kind of know how to set it up.my question is can I connect a Desktop and a Tablet or any PC device to a router like this with out networking the individual units with each other? just to where it serves as more a splitter. is there any wireless alternatives to only "split" the Internet connection and not network the desktop and Tablet?
View 3 Replies
View Related
Dec 11, 2011
I have been using a TP-Link wifi adapter for last two months, It worked flawlessly till a couple of days ago. It just so happened that i turned on my computer and even though the wifi connections were available, when trying to connect this message keeps showing up " Windows was unable to connect to UoC WiFi". I have tried everything from making a new wifi connection to changing usb-ports
FYI I use the same wifi connection on my netbook and android, and they are working fine, so it's definitely not a problem with the ISP.
[code]....
View 7 Replies
View Related
Nov 23, 2011
Just bought myself a TP-Link WN722N Wirless Adapter. Currently I have a Netgear WNA3100 connected which works fine but I to use the TP-Link to connect to a second network simultaneously.Here's the problem.The drivers installed just fine for the TP-Link adapter. Windows shows that its connected as a USB device (USB2.0 WLAN) and Network & Sharing Centre shows it is being "Wireless Network Connection 4"(The Netgear one shows as "Wireless Network Connection 2")However, when i try to use the TP-Link one to connect to a network, it doesn't show up in the "Network Connections" menu on the Taskbar, and when i disconnect the Netgear one it says that it can't find any wireless connections at all; note that "Network & Sharing Centre" still shows the TP-Link Adapter as being connected to the PC).Tried Reinstalling the TP-Link Software, updating it, etc. Restarted PC. Disabled Netgear connection. Physically Disconnected Netgear Adapter and still no luck.
View 2 Replies
View Related
Mar 5, 2011
My DIR-655 drops WiFi connections every few days. All wired connections are fine. Rebooting the router fixes the problem at that time. Cable modem works perfectly fine. [code]
I'm sure I'm missing some devices, but that should give you the general mix of wired/wireless devices that I use. I'm single with visits from my son every other weekend, so network traffic is not that high at my house. I've had this router for a couple years now and didn't use to have this problem. I've been updating the firmware, and I suspect this problem happened after on one those updates. I just don't know which one. Also, I didn't use to have any neighbors with Wireless Routers (that I could detect), but recently there have been 2 who have gotten them. I was hoping this was a problem that D-Link was aware of, but that does not seem to be the case. I would hate to have to go out and buy a new router (not D-Link).
View 14 Replies
View Related
Feb 8, 2013
After 5 years of services my DIR-655 begun acting up yesterday; first of it begun by getting REALLY slow, it could take up to 25 seconds to login into the software and up to 30+ seconds just going from one menu to another, on some instances connection (wired) to the router was lost. This morning it started dropping all connections, wired or not; first my iphone then my WDTV, after that it's been pretty much random connections. On one given moment wired works but not wireless, then wireless works but not wired and sometimes I get both but for 3 or 4 minutes.I've reset the router to factory settings, plugged/unplugged, changed cables, network adapters on desktops and the problem persists.
DIR-655 A2
FW: 1.35
Connection: ADSL
View 2 Replies
View Related
Jan 17, 2012
my configuration; ADSL2+ @ 21Mbps comes in via Telstra. Fibre optic cable trunk to main road, copper to the house, total distance 246m, hence good speeds. The phone is connected to a dual port filter with a phone and fax connected through double adapter to one port, and DSL-526B connected to other port.DSL-526B connected to DIR-655 Hardware A4, firmware 1.30. The two are set up in bridge mode, with a static IP. The DIR-655 connects to a DGS-1016D and a DGS-1008.I am running WIndows 7 ultimate x64 w/8GB ram, I5-2500K, and all MS patches.
four days ago I reinstalled my windows system. At that time, I uninstalled Tablet PC components and Windows search. I use FreeDownload Manager for my download needs, and it includes a BitTorrent client. I installed the latest version.From that point on, whenever I download any torrents the connnection to the internet resets and takes about 1 - 3 minutes to re-establish itself. I have tried going back through the several versions of the program to get back to the version I was running before I re-installed all to no avail.
I replaced the cable between wall socket and filter, replaced filter, replaced phone cable, also to no avail. I have tweaked the program settings now with only three half open connections, and I've reset the modem donezn of times. I've reset the DIR-655, and done factory resets on both and reconfigured them. Nothing has worked. I use MAC address filtering and I have ACLS which block access to various sites because of kids, and I use OpenDNS web content filtering too.
View 13 Replies
View Related
