D-Link DIR-615 :: Connecting Samsung TV (ue40d5520) Wirelessly
Mar 19, 2012
Samsung TV (ue40d5520) connected wirelessly to a D-link dir-615, (Virgin Media)? Sometimes connects and works just fine, hours later it wont even find the router, then in might connect to router but not internet, sometimes says cannot connect due to network inteference... Got a decent signal strength, changed router to channel 11 to stop some interference with others in the neighborhood.My laptop and phone connect to the router fine every time.
View 4 Replies
ADVERTISEMENT
Sep 25, 2011
I get a great wired connection but when I try for wireless the Samsung says I have a great connection, except when I try to use the Apps from the Blu Ray it tells me, No Internect Conncetion. Samusung support tells me I need to "open the ports" on my E3000 and make the Blu Ray a priority...I don't know how to do that.
View 7 Replies
View Related
Mar 19, 2011
I cannot connect my DIR-655 to the Samsung HDTV with apps so I can watch streaming video with Netflix. The router is 60 feet away from the tv but the DIR 655 is advertised as being for a large home. What can I do to extend the signal or better it? I have even tried using my DLink DWL-G710 but have no better results.
View 1 Replies
View Related
Aug 7, 2011
how do you connect the router.
View 1 Replies
View Related
Dec 16, 2008
Im having trouble connecting my iPhone wirelessly using my 615 router. The iPhone sees the router, but cannot connect to it using the router password that i have.
View 8 Replies
View Related
Feb 9, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.00
ISP : Tiscali/Talktalk
I have just bought and setup this router, Wired connection working fine, Problem is no devices seem to connect to wireless, my other PC, phone etc find the router with strong signal, I enter the key but nothing happens. I tried with my phone and stood next to the router and it connected but dropped out when I walked a few feet away.
View 6 Replies
View Related
Nov 16, 2012
Connecting PC to Samsung mobile Wi-Fi
View 1 Replies
View Related
Dec 8, 2012
i have recently purchased samsung smart tv 8 series, but when i try connecting it to internet by lan/ wan it says connected to router but not able to connect to internet contact your isp. though sometimes it connects and then goes to the previous status in short time. i am using leoxsys 54 g-dl 54madsl2+router and i have bsnl ul750 plan.both samsung and bsnl tell its not problem on their side. i am able to access internet on other devices through the same.
View 3 Replies
View Related
Mar 3, 2011
when i connecting internet through my samsung c5212 phone it shows error 628.the remote computer terminate the connection
View 1 Replies
View Related
Jul 26, 2012
Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies
View Related
Jan 29, 2013
I have been trying to connect my smart tv to my wireless network for the last 3 weeks. It connects intermittently but the connection is always lost within a few minutes to a couple hours. I have turned off all of the firewalls, and all other devices connect fine. It is an ea4500 running on updated firmware and a Samsung 6900 smart tv. The connection works if I run an ehternet cable to it oith from the modem as well as from the router, but it does not work over the wireless connection.
View 7 Replies
View Related
Mar 31, 2012
I got this netbook from someone who claims that he is an apple guy and knows nothing about PCs, bought it for his daughter and never had any connection issues whatsoever.My older netbook and my laptop recognize my wireless connection but this one claims it can't renew the IP address and it's all zeroes.I am currently connected through an ethernet cable. My network adapters, an 802.11n wireless LAN card and an Atheros AR8121/AR8113/AR8114 PCI-E ethernet controller have no warning triangles or red x's, although the DOS commands tell me I have disconnected media. I went to the ASUS website and downloaded some updates but am afraid to install anything without being 100% certain because the C drive, as on most older eeepcs, is nearly full and I load everything onto D. I've removed the old profile, unplugged and restarted the router. I've reset, rebooted and pinged. After my reboot, I saw a new error message box. The title bar read "RaUI Message" and the text read "Unable to support WiFi Direct feature".
So - cmd prompt results:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsSadie>ipconfig /all[code]......
View 14 Replies
View Related
Mar 27, 2011
I have the 2wire Gateway modem to connect to the internet on my HP all-in-one desktop computer, which I bought a little over 3 years ago. Occasionally, the computer will show that the internet is disconnected, however the modem will have all it's lights flashing. After attempting several times to get to connect again, I called the support number, and they told me that I would either have to the ethernet cord hooked to the computer or purchase a network adapter. BUT my computer already had a network adapter installed in it before I even bought it, so I don't feel that I need to purchase one and I was able to get it to connect to the internet wireless by myself after hanging up. My question is how to keep my computer from wanting to disconnect from the wireless internet?
View 2 Replies
View Related
Feb 8, 2012
i have windows 7 on computer in my bedroom and its connected to Virgin Media via cable.i have been told that i can get a 2nd computer (in a different room) connected to the internet using a router.does this connect to computer or Virgin Media box? or is router the most efficient way to do this?both computers run windows 7 and 2nd is an emachine and would be used for light surfing, email and downloading games.
i recently bought a wireless printer but have it connected via USB because my computer isnt wireless compatible. do i need something to enable this computer to use printer wirelessly? nobody mentioned this when i bought it!
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 220 Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 1791 Mb
Graphics Card: NVIDIA GeForce 9200, 256 Mb
Hard Drives: C: Total - 144571 MB, Free - 84962 MB; D: Total - 144571 MB, Free - 144292 MB;
Motherboard: Acer, Aspire Z3101
Antivirus: avast! Antivirus, Updated and Enabled
View 6 Replies
View Related
May 2, 2012
I have an HP Pavilion desktop computer running Windows XP Home Edition. It used to never get internet wirelessly for some reason until one day i played around with it. I don't remember how but I got it to go online and it worked ever since. Just recently i have moved from my previous home and have finished setting up both of our computers. The Vista (the one i am using to write this) is an Ethernet connection and is having no problem connecting to the internet. Although, the XP for some reason will not connect to the internet. The adapter will find the network but when i type in the WPA2 it tries to connect but i think it times out or something. I have tried several solutions and none have worked. My father has a Toshiba laptop and he is currently having no issue with connectiong wirelessly to the internet. Our old verizon router stopped working when we attempted to set it up after the move, so verizon came and istalled a new one. It is secured with a WPA2 code whereas our older one was secured with a WEP code. I think it might be a problem with either the router or the wireless adapter itself (which is a Linksys Wireless-B Network Adapter). Also, when i logged into my router manager thing, I noticed that under the network, it said the XP was an inactive Ethernet Connection and not Wireless.
Here are some of the XP's specs:
Hewlett-Packard Pavilion
Intel[R] Pentium[R]
4 CPU
3.40 GHz
0.99 Gb of Ram
View 8 Replies
View Related
Aug 10, 2011
I am trying to connect 2 windows 7 machines wirelessly but without much luck.Both machines are connected to the wireless router and have internet connection. I have created a workgroup and put files into the the public folder, but still cannot get to the files even though the computers can see one another.
View 1 Replies
View Related
Dec 6, 2011
I have a desktop computer connected to a modem and a wireless Belkin router. I bought a Belkin Surf&Share wireless USB adapter so that I could move the desktop elsewhere in the house and still connect to the internet. When I disconnect the computer from the router, the wireless light on the router turns red and I can't connect.
View 1 Replies
View Related
Jan 19, 2012
I have a network at home that me, my brother, and my parents share. I will be building my own PC and placing it in my room, which is upstairs. However, our router and modem are both downstairs. Now, my questions is, will that be a problem? As in, will my network bandwidth be bad? I really can't reconfigure my network nor can I have my computer downstairs since there is not enough room downstairs to place it. I also have a computer desk in my room from a few years back. The modem we have is 2700HG-B Gateway and the router is a CISCO Linksys one. I just have a miniUSB Wireless N adapter.
View 11 Replies
View Related
Jan 8, 2012
New inspiron 14z would not connect to wireless home network. Area networks appeared, tried to connect to my network (entered password, etc.) and would attempt to connect, but could not. Solution - activate McAfee security center.Products - 2 day old Inspiron 14z (windows 7, intel wi-fi) & Netgear n300 (6 months old, connecting 2 yo inspiron 15, sony bluray, kindle fire, hp photosmart 3500 printer with no issues)
I checked router log in information, firmware updates, cable connections - all okay. So I called tech support and the first cutomer care rep adjusted the power saving settings to "Dell" (was turning off wi-fi adapter to save juice), but that didn't solve issue. He told me that it was probably an ISP/router issue. Eventually I spoke to three other reps and 2 supervisors and was consistently told issue was ISP and/or router. Crankily, I told the last customer care rep that if the issue wasn't resolved, I would return laptop, since everything else was working. (Not nice of me, but that's how I felt. I'm not about to spend an extra $100+ on a router when mine is working fine and my ISP service is fine.) So, that rep agreed to connect to both my new laptop and the older inspiron 15 to find any differences in settings. He then found a solution - McAfee security center. I had not activated it, because I prefer another product, and hadn't uninstalled it before calling. The rep activated it and voila, connectivity. Afterwards, I did uninstall mcafee and installed my preferred security product, and still have connectivity.
View 2 Replies
View Related
Jan 16, 2011
I am trying to extend my broadband signal out from the house to a rumpus room.My current setup does not give a signal that far.. or at least it is poor with 1 mbps speed.To cable anything other than my moden to router A is not an option. Router A to Router B and then on to the computers needs to be wireless,My modem is currently connected to router A (Dlink dl624) but how do I get router B (dlink dir635) to talk to router A and then relay my broadbad to my computer out in the rumpus room and also inside the house when I am there.
View 2 Replies
View Related
Dec 19, 2011
i have a Cisco wireless router/cable modem i also have a SMC Barricade SMC7004VWBR wireless router i want to connect the SMC router to the Cisco router via wireless - can this be done?the SMC has a WAN ethernet port and if i plug in a cable from the cisco,everything works fine i can not find anywhere in the setup of the SMC an option for a wireless WAN connection is the wireless only for the LAN side?
View 3 Replies
View Related
May 13, 2011
I am currently at a friends house attempting to fix a situation he is having with his' wireless router, it is a Linksys WRT150n.Connection to the internet is possible via ethernet connectivity, however wireless is another story, devices can see the network but cannot connect to it, i have disabled the security key from the network to see if it was a simple password incorrection but still no dice.The current basic wireless settings have network mode set to mixed, and radio band, wide and standard channels set to auto, all other settings in the advanced tab are set to their default values.
View 1 Replies
View Related
Mar 3, 2012
My buddy just purchased a Sharp AR-M450 multifunction printer for his small business and it has the optional network card. He wants to take advantage of the network printing capabilities but we want to avoid having to run an ethernet cable from the printer to the wireless router. The entire network is wireless because running cables would be a huge pain in the building he is in. What could we use to connect the printer to the network without running cables?
View 1 Replies
View Related
Feb 5, 2013
I have an internet dvd player that can only connect through a wired connection but my router (verizon wi-fi modem) is located in another room.I was wondering how I can wirelessly connect my old router (e2000) to the one in another room? Would I configure it as a access point?
View 6 Replies
View Related
Oct 22, 2012
I am working on a Dell Inspiron 3000 for a friend. It was gifted to him and he had to re-install the OS which is Win XP. I installed all of the drivers Dell had listed that goes with this particular model. It is still not connecting to the Internet wirelessly or via LAN.
View 1 Replies
View Related
Feb 27, 2012
My WRT54G router locks up 100% of the time when attempting to connect connect wirelessly to a Samsung Blue Player (Model number BD-P3600). I can connect to it with a cable no problem, but when I attempt to do so wirelessly and type in the password on the Blue Ray player, it attempts to connect but the router locks up and all devices connected to it (wired or wirless) lose connectivity
View 1 Replies
View Related
Jan 17, 2012
Running Win XP (no service pack), WPA personal. Two other computers connect fine. On an old laptop running Win XP the network card sees the router, but when I enter the correct passcode (16 character) I get a message saying the code must be 13 characters. How can a connect this computer without disabling the other two wireless devices running through the router?
View 2 Replies
View Related
Mar 7, 2013
I have a Linksys X5000 hooked up with my home pc. The internet I get is free though the private school's network I work at (across the street) through a LAN. With a bit of wrestling I got my desktop to connect with the internet through the Linksys like an ethernet switch.I can't get my wireless devices to connect with the internet without logging in as a guest, which is annoying to do every time, especially through my iPod. They will gain access to my network, but not the internet.
Since this is a school network, my IT guy gave me a static IP address to speed up up/downloads by disabling DHCP. Every time I try to do that I get a message that "the page at 192.168.1.1 says the value can't be equal." OK, so I try to change my router's IP to 192.168.1.2 and...no luck, same message. I love working with hardware, but networking is beyond me. I don't think I can log into the guest screen in my own house any more! I am getting a new tablet in 2 days and this just won't do.
View 1 Replies
View Related
Nov 26, 2011
I have a BEFW11SF V4 firmware version 1.52.03. I just bought an HP DJ3051A and can't get it to connect. HP support says I need to change a setting to mixed mode but I don't see that I can. Does this router supports mixed mode and if so how do I change it?The other comment the HP rep made was the printer does not support Wireless N. I am fine with this since the router says Wireless B. It seems based on the HP rep's comment that as long as I am not using Wireless N, then I should be fine.
View 1 Replies
View Related
Oct 20, 2012
I have an original Xbox 360 (wifi not built in) and the external wifi adapter. With all previous Cisco routers, I have been able to connect my Xbox successfully and quickly. Now, however, I am experiencing much difficulty.
I have verified I am using the latest firmware for my router, and configured my router like this: [URL] in terms of ports. I have also used the Xbox's MAC address to give a static IP address via my router's DNS.
The Xbox can see both my main wireless SSID and my guest SSID but cannot connect to either.
View 2 Replies
View Related
Sep 11, 2011
I just hooked up my new Sony BDV-E570 Blu-ray home theater in a box. Everything looks great except it is not connecting to my WRT110 wireless router. Router is one level below where the home theater system is located, and signal strength appears good (4 bars) on the Blu-ray player, but it repeatedly says "connection failed" when I try to connect. The Wii is also in the same place and has no problems connecting wirelessly to the WRT110 router.
View 2 Replies
View Related
Jul 10, 2011
I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.
View 7 Replies
View Related
Jun 28, 2011
I have a Samsung BD-C5500 Blu Ray player and am using the Samsung PC Share Manager software. For some reason, the software is not recognizing the player. However, the player is able to connect to the internet (I stream Netflix). I am running Windows XP service pack 3 and both my BD player and PC are connected to the same router (D-Link 601). IP address for BD player is 192.168.0.102 and PC is 192.168.0.100. BD player firmware is up to date.
View 1 Replies
View Related
