Linksys Cable / DSL :: X5000 Connecting Wirelessly To Network But Not Internet
Mar 7, 2013
I have a Linksys X5000 hooked up with my home pc. The internet I get is free though the private school's network I work at (across the street) through a LAN. With a bit of wrestling I got my desktop to connect with the internet through the Linksys like an ethernet switch.I can't get my wireless devices to connect with the internet without logging in as a guest, which is annoying to do every time, especially through my iPod. They will gain access to my network, but not the internet.
Since this is a school network, my IT guy gave me a static IP address to speed up up/downloads by disabling DHCP. Every time I try to do that I get a message that "the page at 192.168.1.1 says the value can't be equal." OK, so I try to change my router's IP to 192.168.1.2 and...no luck, same message. I love working with hardware, but networking is beyond me. I don't think I can log into the guest screen in my own house any more! I am getting a new tablet in 2 days and this just won't do.
View 1 Replies
ADVERTISEMENT
Jan 19, 2012
I have a network at home that me, my brother, and my parents share. I will be building my own PC and placing it in my room, which is upstairs. However, our router and modem are both downstairs. Now, my questions is, will that be a problem? As in, will my network bandwidth be bad? I really can't reconfigure my network nor can I have my computer downstairs since there is not enough room downstairs to place it. I also have a computer desk in my room from a few years back. The modem we have is 2700HG-B Gateway and the router is a CISCO Linksys one. I just have a miniUSB Wireless N adapter.
View 11 Replies
View Related
Aug 18, 2012
I have a dell desktop that uses Windows XP. Today I was cleaning out some unwanted programs that I never use and just take up space. But I don't know if I deleted something that I shouldn't have, or what happened but I am now unable to use my wireless internet. It says that a "network cable is unplugged". I have checked my modem and it is working fine. My brother is receiving internet in is laptop.
View 3 Replies
View Related
Mar 27, 2011
I have the 2wire Gateway modem to connect to the internet on my HP all-in-one desktop computer, which I bought a little over 3 years ago. Occasionally, the computer will show that the internet is disconnected, however the modem will have all it's lights flashing. After attempting several times to get to connect again, I called the support number, and they told me that I would either have to the ethernet cord hooked to the computer or purchase a network adapter. BUT my computer already had a network adapter installed in it before I even bought it, so I don't feel that I need to purchase one and I was able to get it to connect to the internet wireless by myself after hanging up. My question is how to keep my computer from wanting to disconnect from the wireless internet?
View 2 Replies
View Related
Feb 8, 2012
i have windows 7 on computer in my bedroom and its connected to Virgin Media via cable.i have been told that i can get a 2nd computer (in a different room) connected to the internet using a router.does this connect to computer or Virgin Media box? or is router the most efficient way to do this?both computers run windows 7 and 2nd is an emachine and would be used for light surfing, email and downloading games.
i recently bought a wireless printer but have it connected via USB because my computer isnt wireless compatible. do i need something to enable this computer to use printer wirelessly? nobody mentioned this when i bought it!
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 220 Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 1791 Mb
Graphics Card: NVIDIA GeForce 9200, 256 Mb
Hard Drives: C: Total - 144571 MB, Free - 84962 MB; D: Total - 144571 MB, Free - 144292 MB;
Motherboard: Acer, Aspire Z3101
Antivirus: avast! Antivirus, Updated and Enabled
View 6 Replies
View Related
Nov 29, 2011
A few weeks ago my internet speed suddenly became slow. Not so slow you can’t do anything without having to wait half an hour, but significantly slower than usual, and it also has occasional drop-outs. It can’t be an issue with the computers connecting to the router, which it’s doing fine as I can access my router’s setting though the IP address, but with the router connecting to the internet.
View 4 Replies
View Related
Mar 3, 2012
My buddy just purchased a Sharp AR-M450 multifunction printer for his small business and it has the optional network card. He wants to take advantage of the network printing capabilities but we want to avoid having to run an ethernet cable from the printer to the wireless router. The entire network is wireless because running cables would be a huge pain in the building he is in. What could we use to connect the printer to the network without running cables?
View 1 Replies
View Related
Oct 22, 2012
I am working on a Dell Inspiron 3000 for a friend. It was gifted to him and he had to re-install the OS which is Win XP. I installed all of the drivers Dell had listed that goes with this particular model. It is still not connecting to the Internet wirelessly or via LAN.
View 1 Replies
View Related
Oct 21, 2012
it looks like this thread hasn't been active for a while Also I did that ipconfig /all command as well and here is what i got
View 1 Replies
View Related
May 2, 2012
I have an HP Pavilion desktop computer running Windows XP Home Edition. It used to never get internet wirelessly for some reason until one day i played around with it. I don't remember how but I got it to go online and it worked ever since. Just recently i have moved from my previous home and have finished setting up both of our computers. The Vista (the one i am using to write this) is an Ethernet connection and is having no problem connecting to the internet. Although, the XP for some reason will not connect to the internet. The adapter will find the network but when i type in the WPA2 it tries to connect but i think it times out or something. I have tried several solutions and none have worked. My father has a Toshiba laptop and he is currently having no issue with connectiong wirelessly to the internet. Our old verizon router stopped working when we attempted to set it up after the move, so verizon came and istalled a new one. It is secured with a WPA2 code whereas our older one was secured with a WEP code. I think it might be a problem with either the router or the wireless adapter itself (which is a Linksys Wireless-B Network Adapter). Also, when i logged into my router manager thing, I noticed that under the network, it said the XP was an inactive Ethernet Connection and not Wireless.
Here are some of the XP's specs:
Hewlett-Packard Pavilion
Intel[R] Pentium[R]
4 CPU
3.40 GHz
0.99 Gb of Ram
View 8 Replies
View Related
Sep 19, 2012
I have just arrived at a friends house to stay for a while and my laptop does not connect to the internet properly through the wireless yet works perfectly when plugged into the router directly through ethernet cable. it is not the actual router's wireless that is broken because there are three other laptops that connect and work just fine.I have done several virus scans using AVG and Spybot Search and Destroy and other than incredibar nothing has been found so i dont think it is a virus. I thought it might have been the 6to4 adapter so i disabled to no avail.The problem is not connecting to the network as that works fine and every now and again i can get 10 minutes of internet use before it stops working. most of the time still saying i am connected to the internet for an extra 5 minutes then saying i have a local only connection[CODE]
View 1 Replies
View Related
May 13, 2011
I am currently at a friends house attempting to fix a situation he is having with his' wireless router, it is a Linksys WRT150n.Connection to the internet is possible via ethernet connectivity, however wireless is another story, devices can see the network but cannot connect to it, i have disabled the security key from the network to see if it was a simple password incorrection but still no dice.The current basic wireless settings have network mode set to mixed, and radio band, wide and standard channels set to auto, all other settings in the advanced tab are set to their default values.
View 1 Replies
View Related
Feb 5, 2013
I have an internet dvd player that can only connect through a wired connection but my router (verizon wi-fi modem) is located in another room.I was wondering how I can wirelessly connect my old router (e2000) to the one in another room? Would I configure it as a access point?
View 6 Replies
View Related
Feb 27, 2012
My WRT54G router locks up 100% of the time when attempting to connect connect wirelessly to a Samsung Blue Player (Model number BD-P3600). I can connect to it with a cable no problem, but when I attempt to do so wirelessly and type in the password on the Blue Ray player, it attempts to connect but the router locks up and all devices connected to it (wired or wirless) lose connectivity
View 1 Replies
View Related
Sep 25, 2011
I get a great wired connection but when I try for wireless the Samsung says I have a great connection, except when I try to use the Apps from the Blu Ray it tells me, No Internect Conncetion. Samusung support tells me I need to "open the ports" on my E3000 and make the Blu Ray a priority...I don't know how to do that.
View 7 Replies
View Related
Jan 17, 2012
Running Win XP (no service pack), WPA personal. Two other computers connect fine. On an old laptop running Win XP the network card sees the router, but when I enter the correct passcode (16 character) I get a message saying the code must be 13 characters. How can a connect this computer without disabling the other two wireless devices running through the router?
View 2 Replies
View Related
Nov 26, 2011
I have a BEFW11SF V4 firmware version 1.52.03. I just bought an HP DJ3051A and can't get it to connect. HP support says I need to change a setting to mixed mode but I don't see that I can. Does this router supports mixed mode and if so how do I change it?The other comment the HP rep made was the printer does not support Wireless N. I am fine with this since the router says Wireless B. It seems based on the HP rep's comment that as long as I am not using Wireless N, then I should be fine.
View 1 Replies
View Related
Oct 20, 2012
I have an original Xbox 360 (wifi not built in) and the external wifi adapter. With all previous Cisco routers, I have been able to connect my Xbox successfully and quickly. Now, however, I am experiencing much difficulty.
I have verified I am using the latest firmware for my router, and configured my router like this: [URL] in terms of ports. I have also used the Xbox's MAC address to give a static IP address via my router's DNS.
The Xbox can see both my main wireless SSID and my guest SSID but cannot connect to either.
View 2 Replies
View Related
Jun 29, 2012
I have a Linksys WAG320N wireless N router which provides wireless coverage to only a part of my apartment. I'm trying to extend the wireless coverage by using an Apple Airport Express (1st Gen). The only way this would make sense would be to extend wirelessly.
1) is this technically possible? I had assumed so when buying the Airport Express
2) Do I have to change some settings inside my WAG320N to make it "Extensible" ?
View 2 Replies
View Related
Sep 11, 2011
I just hooked up my new Sony BDV-E570 Blu-ray home theater in a box. Everything looks great except it is not connecting to my WRT110 wireless router. Router is one level below where the home theater system is located, and signal strength appears good (4 bars) on the Blu-ray player, but it repeatedly says "connection failed" when I try to connect. The Wii is also in the same place and has no problems connecting wirelessly to the WRT110 router.
View 2 Replies
View Related
Jul 10, 2011
I just installed WRT54GH and wireless was working fine, after almost 3 hours passed I lost connection with it.I tried to connect using wireless with 3 different notebooks without success. Just using cable it works.I upgraded firmware from v1.0.010 to v1.0.01 but still not working.
View 7 Replies
View Related
Jul 24, 2011
Just recently im having trouble connecting to the wireless Using my hp laptop. The Wireless Was previously working fine though recently, has stopped working, all the other devices on the wireless network work fine (Asus Laptop, Iphone's etc). The hp laptop has no problem in connecting to the neighbours wireless and picking up a signal, however, when i go to search for the WAG320N im unable to find it in the list, sometimes it does appear, but after double clicking has trouble connecting to the wireless and will then dissapear from the list. I have tried manually entering the SSID and Password and seeing if it would connect, and also manually entering the IP address however no luck, no other device on the network has trouble finding the broadcast Signal Apart from the HP DV6-3139TX
View 1 Replies
View Related
Oct 2, 2011
Can a WAG320N be configured to converse wirelessly with a BThub3? I'd like to connect my tv/home cinema to the net but it's not eassily wireable.
View 3 Replies
View Related
May 9, 2012
I have a pc connected to a router through the pc's wireless adapter. I have an ipad and laptop that are out of range of the wireless router. Am I able to create an ad hoc network or something of the sort that will enable me to connect to my pc and use the internet through the pc?
View 1 Replies
View Related
Sep 20, 2012
my system not connect with internet cable
View 1 Replies
View Related
Oct 1, 2011
I have a 10 foot ethernet Cable, and a 100 foot ethernet cable. Both cables work great from the router to my Thinkpad PC, and both work through the same port on the router. on my xbox the 10 foot cable works immediately when I hook it up to my xbox. The 75 foot cable will just not work to the Xbox. Again, it works fine to 2 of my laptops in the house. Is there a problem with Xbox and Long ethernet cables?
View 7 Replies
View Related
Sep 21, 2011
Yesterday my main computer lost internet connectivity after avast! ran an antivirus scan and removed several viruses. I spent much of the day yesterday researching the possible problems and did not come up with any solutions.My computer's OS is vista, and the network status says it is, "Connected to identifying". If there is any additional information you will need, I will gladly provide.
View 14 Replies
View Related
Aug 9, 2011
I want to connect internet via telephone cable by using rj11 jack from my ethernet switch to another computer it is 150mts away from my office premises.
View 1 Replies
View Related
Nov 3, 2011
I just got a new Inspiron 5110 laptop. I can connect to internet via wireless but I cannot get internet via my cable provider. It works on my old desk top. Does something new to be re configured??
View 1 Replies
View Related
Oct 25, 2012
I've got a Cisco DPC3825 modem that I also use as a wifi router. Conntected to it I have 4 eithernet cables:
1. From PC to Router
2. From another PC to router
3. From TV to router
4. From a Dlink Powerline Adapter to Router.It took me a while to figure this out but when I unplug all the eithernet cables and plug back in #1 and #2 (from above) the internet works. When I plug back in #3 and #4, the internet dies. Meaning, I am connected to the network but not the internet. I've reset the modem, changed SSID and restarted the PC many times but still can't figure out this issue.
View 5 Replies
View Related
Jul 22, 2011
problems when I wanted to connect my laptop to my WAG120Nrouter for the first time.First the wireless adapter on my windows xp gives me the error "unable to verify your identity"second when i passed the security verification by bypassing the security options on the connection properties of the adapter, windows tries to acquiring network address and continues it for hours. Seems Windows cannot get any ip address from the router.The router works fine with wired Ethernet devices and my iPhone when i connect it wirelessly.
View 1 Replies
View Related
Feb 21, 2011
Two years ago I bought a WAG160N for modem (ADSL) and router functionality. I consider to buy a pure router (E3000 or E4200) to connect to the WAG160N and use that one purely as the modem. How and what should I configure/disable on my WAG160N?
View 3 Replies
View Related
Mar 4, 2011
Model: Linksys CM100 Cable Modem, purchased December 2010
Modem goes dead immediately after 3rd light goes solid. All lights go out and the modem stops functioning completely. Using the reset button gives no response, the modem stays dead. Upon unplugging and plugging it back in, the modem turns back on and cycles through the lights, only to die out once again.I was initially able to get it to stay alive by starting it with the Ethernet cable disconnected then plugging it in once the modem had connected, which I found odd. After a relatively short period, say 20 minutes, the modem would randomly die out again. However even that has since stopped working.
View 1 Replies
View Related