I have a pc connected to a router through the pc's wireless adapter. I have an ipad and laptop that are out of range of the wireless router. Am I able to create an ad hoc network or something of the sort that will enable me to connect to my pc and use the internet through the pc?
View 1 RepliesI have a router with wireless capabilities but my tv is far from the router and impossible to connect with an ethernet cable. Is there any way to install a Roku wirelessly to your HD tv?
View 3 Replies View Relatedi have a lan connection for internet, the wireless card is used for an adhoc connection to a device that does not have internet, my pc just keeps telling me i have no internet connection because it is letting the wireless connection take priority over the lan connection
View 2 Replies View RelatedWe have 3 pcs connected to the router via cable and 2 more pcs connected through wireless. Everything works great. But when I try to connect (want to connect 2 more laptops via wireless) either one of the two laptops, the whole network stops working immediately. I have tried updating the drivers (they are up to date), removing the password from the router, gave the laptops static IPs (and all other pcs as well) with no results. As soon as one of the 2 laptops joins the network through wireless, it stops working for everybody. However if I connect them through the cable they work fine. One of the laptops uses win vista 64 bit, the other one win 7 64 bit. We have cisco RangePlus Wireless Router wrt110.
View 1 Replies View RelatedI recently moved into a new place and while unpacking I found my Linksys WRT54G router and I am currently trying to set it up to I can connect to it wirelessly. I am able to access the administrative settings fine, and have got it to finally connect to the router, but there is no Internet connection, nless I am hardwired into my cable modem. I dont believe I have the software installed on this computer and I cant seem to find a place to download it even on the Linksys website, and the firmware is probably in bad need of updating.
View 4 Replies View RelatedI have a Linksys X5000 hooked up with my home pc. The internet I get is free though the private school's network I work at (across the street) through a LAN. With a bit of wrestling I got my desktop to connect with the internet through the Linksys like an ethernet switch.I can't get my wireless devices to connect with the internet without logging in as a guest, which is annoying to do every time, especially through my iPod. They will gain access to my network, but not the internet.
Since this is a school network, my IT guy gave me a static IP address to speed up up/downloads by disabling DHCP. Every time I try to do that I get a message that "the page at 192.168.1.1 says the value can't be equal." OK, so I try to change my router's IP to 192.168.1.2 and...no luck, same message. I love working with hardware, but networking is beyond me. I don't think I can log into the guest screen in my own house any more! I am getting a new tablet in 2 days and this just won't do.
I have a printer (with wireless capability) wired to desktop (Windows XP) and a wireless laptop (Windows 7).My question is, can the printer be connected wirelessly to the laptop as well as wired to the desktop, or does everything have to be wireless? If I want to share files between the two computers, do they both have to be the same operating system? (one is Windows XP and the other is Windows 7)
View 2 Replies View RelatedI have a wireless G router and all of my devices that connect to it right now all have wireless adapters. I have several devices in a media closet (about 3 or 4 - Blu ray, DVR, ect) that only have wired ports. Since all these devices are right next to each other, I don't need to buy a wireless adapter for each one because that's just pointless. is there a way to have all 4 of these wired devices connect to a central device, which in turn this device connects to my wireless network? I know there is a way I just haven't been able to figure it out.And then, with this new device, is there some special way it has to be configured?
View 1 Replies View Relatedjust got a new router/modem and found the network but can only get local connection no internet. Im running vista?
View 2 Replies View RelatedWindows 2003 R2 Server machine cannot be pinged, not XP? I'm running a highly modified version of Windows 2003 R2 to make use of an old PC. It connects beautifully to a Verizon router (I can browse the Internet), but I can't figure out how to share folders on my network. I have a Macbook and Win7 machine and both cannot see this old PC on the network. I have tried to ping the old PC from my Win7 machine, and it will only timeout. Below is some relevant output from the old PC
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>nbtstat -n
Wireless Network Connection:
Node IpAddress: [192.168.1.6] Scope Id: []
[code]...
I have an acer laptop and although I have wirelessly connected to my canon mp560 printer, it loses the connection and I cannot reestablish it so my lap top tells me the printer is offline. Is there something else I need to do or load on for this to work every time?
View 1 Replies View RelatedI am connected to my network wirelessly and I have Internet acces (according to the symbol at the bottom right) bu the Internet doesn't work. At the moment it keeps fluctuating between giving me interne and not I am using Skype to tell me if I have Internet ( when it's green I do when it's grey I don't) I have tried many things on forums like obtaining ip automatically or obtaining a fixed ip. I've tried renewing the ip and all this doesnt work.
View 4 Replies View RelatedI detected the ad-hoc network on my other computer. I connected, but yet when I went into firefox to surf the web, there was no internet connection, and it didn't work.I have already enabled Internet Connection Sharing on the host computer. What can be wrong? The purpose of creating this ad-hoc network on the host computer is to share internet connection on several computers in my house.
View 14 Replies View RelatedI am having issues with trying to change my network from private to home on windows 7 home edition. In network and sharing centre it is saying im not even connected to a network when im connected to my modem. This is what it comes up with when I run ipconfig:
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::4c4d:935a:a627:cd6c%12
[Code].....
I have two PCs at home, The first one gets a wired connection from ISP, and has the internet. The second gets a wired connection from my first PC (through another network card). I recently had to reinstall windows 7 on my first pc, and It seems i cant get internet to work on my second pc. The computers can ping each other, and my second pc shows as "connected", yet has no connection to the internet (and cannot ping to anywhere, cept my first pc). My second pc is running windows XP and before I reinstalled the first PC's windows everything was fine, and I didnt change anything on my second pc either (well, changed everything back anyway). IP configs seem to be fine.
View 4 Replies View RelatedBought wifi from virgin and cannot connect to net when network connections say i am connected.
View 1 Replies View RelatedSanta got a second-hand acer mini-laptop for my daughter this last Christmas and she accidentally pour some coke in it, I took it to the shop and I had to pay to repair it; when I got it back, the first thing is that originally it has Windows 7 and now XP, I thought it was ok, but even though I use my network passkey and everything, it quickly connected to the network showing internet access but when I open IE, it shows a message to diagnose connection problems, I run the repair wizard and nothing, but all the time it is showing that the connection is working, will I need to take it back to the shop or is there something I can do?
View 14 Replies View RelatedI'll try and explain this the best that I can. I'm currently running a Sony Vaio VGN-NW270F laptop with Windows 7. I'm using a WRT54G2 v1.5 router for my internet connection. Last Wednesday, I tried to go online, but my wireless connection for my home network came up as "limited connectivity", even though there was a 5-bar signal strength. Since then, it has identified and connected to my home network, but displays "no internet". On startup, however, it connects, but then promptly disconnects, and I experience the same issue. I can go online using my parents' laptop, my 3DS, and my Wii, so I assume it's an issue with my computer rather than my router.
Additionally, I have tried using an ethernet cord to go directly into my computer - no luck.I have also done 2 system restores to late May - still no luck.I have uninstalled/reinstalled the necessary drivers - no luck.The only thing out of the ordinary that may have contributed to this situation is that on the day when I started having this problem, a notification saying that my parents' computer's IP address was the same as another on the same network. I have NO idea what that means, nor do I know how it happened, or how to resolve it, if needed
I am ressurecting an old pc using windows xp service pack 3. I can connect to my network but not the internet. I have tried several different solutions to no avail. If I connect to the local openzone I can connect, but not through my network. I am using a Belkin wireless card and the modem/router is a dlink 2740b
View 1 Replies View RelatedI know about the issue of disabling default gateway... but the thing is on my Windows Vista, when i click on advanced setting for tcp/ip 4, there is no box ticks for disabling it. I don't know why.
View 3 Replies View RelatedI have tried everything (to the best of my knowledge). I have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail.The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again noI have seen on a few forums that when people provide their HijackThis logs.[CODE]
View 1 Replies View RelatedI can't connect suddenly to the Internet. I tried both Wired and Wireless connection to my laptop. The icon is showing that my laptop has detected the connection but has no internet access.Showing in my screen is: Connected to Network. IPV4 no internet access, IPV6 no internet accessI tried using my iPhone to connect via the wireless connection and I could get browse the Internet with it.. hence i'm sure the problem lies with the laptop.
View 10 Replies View RelatedI have a computer that can no longer connect to the internet whether through the wireless or wired directly to the router. The computer will recognize and connect to the network locally. Two other computers are on the network and they are connect just fine.
[code]...
I have been having an internet connection problem recently. My laptop can connect to networks, but not to the internet. I have tried two locations with wireless networks, and both do not work on my computer, but do on other computers, so I know it is my computer and not the network that is the problem
View 10 Replies View Relatednetwork is now connected but not internet access
View 1 Replies View RelatedI tried fixes but no luck. [CODE]
View 11 Replies View RelatedI have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail. The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again no joy
HijackThis logs. Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:31:15 PM, on 4/13/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Unable to get Internet Explorer version!
[code]....
I have recently built a server running WHS 2011. The mobo have 4 NIC ports.
NIC 1 - Is connected to network / internet and is set with static IP.
NIC 2 - Is connected to a WD Mybookworld NAS Drive with no specific IP settings.
I can access the NAS drive for a short while, but after say 10 mins (sometimes shorter) I lose access and it says it cannot find the drive.I know its not a NAS drive issue as when NAS is plugged directly into router there is no issue.I have tried using a static IP for NAS drive but cannot access the drive at all then (have tried default gateways as router and the server ip address). But nothing.I can't turn off the NAS drive with the power button it has to be unplugged so as if its locked up for some reason.
I have three computers at home: 2 desktops and 1 laptop and they all run windows 7. For a week now I haven't been able to connect to the internet from one of the desktops. The initial setup was wireless and worked fine for years. I've tried every advise I could find online: Powered off and on the modem and the router, disabled and enabled the adapter, reseted WINSOCK and TCP/IP, assigned a permanent IP address, did a system restore to the last day the internet worked, turned off windows defender (windows firewall has always been off), turned off Webroot, I bought a new wireless USB adapter which connected to the network but still no internet access and my last resort: I got a really long ethernet cable and connected directly to the wireless router AND then directly to the modem... NOTHING! Still says that I am connected to an unidentified network and that there is not internet access.
View 5 Replies View RelatedI've installed Fortigate 60B and now need to provide access to our guests. Guests must be isolated from office infrastructure. For this configuration I've set up DMZ interface with DHCP server. Client connected to DMZ port gets DHCP configuration but can't go out to the Internet.
Internal interface:
Addressing mode: manual (10.0.0.250/24)
DMZ interface config:
Addressing mode: manual (192.168.16.1/24)
[Code].....
After moving I was using a wireless Internet connection for a while but then I started using a direct connection to a router. Now I'm back to wireless but I'm having this problem, my brother has been using the wireless from the beginning and still does so I'm sure it's my computer. No browsers work, no games, nothing can connect to the Internet.I'm running windows 7 and now the Internet icon in the taskbar is the computer monitor with a yellow triangle as opposed to the bars of wireless internet unless I'm connected or trying to connect to the wireless Internet that either says I have limited connectivity or is connected but doesn't work.
View 4 Replies View RelatedWindows IP Configuration[CODE]
View 7 Replies View Relatedno matter what device is used to connect to our Linksys WRY54G v2.0 Router, whether it be CAT6, internal wireless card (Intel Wireless LAN (802.11a/b/g/n), or USB wireless card (Linksys AE1000), she drops connections at random and frequent times and has to disconnect the device and reconnect to get internet back. She is still connected to the network though. The issue has been becoming more and more frequent the past few days and has been ongoing for a few months. We are at wits end with the issue. I looked on Linksys' website for updated firmware for the router AND the AE1000, no new firmware and same driver that is installed for the AE1000. We have tried to enable Multimedia Environment, Disable 802.11, unchecked "Automatically turn off device to save power", changed router channels from 6 to 1, have uninstalled ALL third party firewalls and AV/Spyware/Malware/Adware removal programs (but not before scanning the system), and lastly tried the DHCP Braodcast Flag Fix.
View 19 Replies View Related