D-Link DIR-601 :: Can't Watch Mms Streams Like Internet TV (port 1755)
Jun 15, 2010
Application can connect, but doesn't get any response back. Bypassing router solves the problem.Looks like there are not too many settings I can change allowing/disallowing particular ports for outgoing traffic.How to fix this so I can watch mms streams?I called DLink support, opened the case DSI-400-927087.First rep there suggested to turn on multicast.Then rep asked to change link speed from Auto 10/100 to just 100Mb and to reduce MTU from 1500 in increments to 1400. So I had to revert to my old Linksys router BEFSR41 from 8 years ago. This one works fine with MMS streams.
View 8 Replies
ADVERTISEMENT
Aug 8, 2012
So i'm behind a fiber 100mbit connection, and for the past few weeks i've been noticing overall slowness on everything video related, from youtube to any kind of stream using flash video.If I try to watch a video on youtube it will constantly buffer, the same with stuff like ustream and the like.
The odd thing is that I have VPN service that I use to avoid regional restrictions, and when I use it to stream anything, then all the videos and streams are silky smooth and load pretty quickly which is odd since It should work on reverse. Also, a speed test through the proxy gives me no more than 10mbit, while without the proxy I get 95+mbit.
Is it something with the router? I've never heard of the ISP throttling stuff.Like I said, everything works perfectly, except video streams. I can max out torrents at more than 10 MB/s.The router im using is a D-link dir-855 (provided by my isp). I head about disabling QoS.
View 4 Replies
View Related
Aug 26, 2011
I am currently wirelessly streaming BR rip movies from my PC tower to a PS3. I have a gigabit connection from the PC to the router (D-Link DIR-825) which is broadcasting (5Ghz 'N') to a D-Link DAP-1522 bridge. Gigabit connection from the bridge to the PS3. The router is reporting a 70-75% connection with 240mbps, although I am realistic and don't expect that. I had been ripping and compressing my BR movies to 4-8GB. I had never noticed any trouble with these because my network can easily handle the additional traffic if it had been doubling or tripling these. I recently purchased a 2TB HDD and decided to just rip and not compress a few of my favorites. So now instead of a 3-10Mbps stream I have 15-45Mbps streams. I am ripping them straight to an .m2ts container (AVC/AC3) when the original video codec is AVC and converting to .mp4 (AVC/AAC) with Ripbot if the original codec is VC-1. Neither container makes a difference.
What's happening is that when I stream these uncompressed BRs, the picture and audio stutter and jump (indicating a bit-starved network connection). When I check the bitrate reported by the PS3, it is showing 80-150Mbps. I have run these video files through Bitrate Viewer just to be sure, and they are all running at normal bitrates, i.e. <50Mbps. Somewhere along the line, my network is doubling or tripling the stream. I have used both Mezzmo and TVersity as my DLNA servers with the transcoding turned off. The files playback fine at the expected bitrates on the PC with VLC Media Player.
Also, the problem is not with the wireless bridge. I was linked with a Linksys WET610N, while working on this problem, I attempted to update the firmware and bricked it. If anyone needs a DOA WET610N, they can have it for the cost of shipping. The DAP-1522 is getting a better signal and reporting a higher bitrate ceiling than the Linksys was.Is there a PC or router setting that could be causing this? I have even done a reset to restore the factory defaults on my router, but it hasn't made a difference.
View 1 Replies
View Related
Mar 17, 2013
I have setup all the port forwarding etc. and am able to watch the camera from outside. Problem is it takes me to the web setup page. This creates problems if I want to give the URL to someone else. Is there anyway just to get the picture on an otherwise blank html page?
View 4 Replies
View Related
Mar 9, 2013
Region : Turkey
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP : EXtend
I have a android box linked to my tv it works fine in wireless mode, but when I link the router to the android box hard wire, it does not recognise the hard wire link just carries on with wireless connection ?
View 2 Replies
View Related
Jan 23, 2012
I took my tv off of the cable, and am watching the Analog channels. Is there a way I can freely watch like USA HD, and such? Also, I have comcast I was going to watch stuff over the internet is there a way around minus switching to business class from comcast to not count toward bandwith?
View 4 Replies
View Related
Aug 31, 2012
he tries to share a file with me from his computer to mine the file will share, once done, if he goes online to watch any video, (on youtube, a news website or even a video he has saved on his computer) he will lose internet connection. He then has to restart his computer to get his internet back.
View 14 Replies
View Related
Sep 26, 2011
how to connect to inter using wifi from mobile phone to watch youtube videos?
View 1 Replies
View Related
Feb 16, 2011
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
View 2 Replies
View Related
Dec 17, 2011
I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.
View 2 Replies
View Related
Apr 28, 2011
I recently switched providers and now i'm down to a 1.5 MBPS download speed (advertised at 3 MBPS but our area is only serviced for half that) so I'm trying to find something that will smooth out the capabilities of my PC's with streaming videos and such for my nephew on sites like disney.com and other sites. I can post specs later if you guys need em but one PC which I know its issue, it is around 10 years old so I'm not expecting great performance. The knew one though is only a year old with 1GB DDR2 Ram and windows XP Home. The older one has 512MB Ram....I think its SD with windows XP pro. Again I can post full stats later if needed but not really trying to trouble shoot. More looking to boost. We run 2 computers and a Wii off our wireless modem. I'm curious if somehow the computers could be configured to operate on seperate...ports I guess to minimize the lag on the modem. We are noticing that if one computer is downloading something it cause the second computer to lag or makes streaming anything all but impossible.
View 4 Replies
View Related
Aug 28, 2012
my laptop was used by my Mother, So when i got back The anti virus guard got unknown error Avira free vers, and i had services.exe infected, and i had already found a way to clean it it, by renaming services.exe to services.bak and putting another computers services.exe.
[code]...
View 3 Replies
View Related
May 17, 2011
I am facing a strange problem with my DIR 601 router. I am not able to access internet when I plug in the cable from my model to slot marked nternet' on the back of the model (which I guess is the right way). However, I can access the internet if I plug in the cable coming from modem into any of the 4 ports marked as 'LAN'.
View 2 Replies
View Related
Apr 7, 2013
I have some questions about DIR-655 want to ask.
1.I use it as a AP, no connection in the internet port, however I only see the DNS setting in the WAN interface, so some url setting can not normally run. Do it has AP mode or other setting that can resolve the DNS.
2.I notice that the Time will suddenly wrong something, even I set it to use local time or ntp.
3.I change the wireless setting to WPA Enterprise, and notice that always disconnect and reconnect, When it is disconnect, notebook and phone can not search the wireless, but ping in local is still alive, log also only show that reconnect, what is happen?
4.I run the internet wizard (not at beginning), I do not change new password in the second phase of wizard, however, after the end of wizard, restart the DIR 655, I can not use the password I set before to login and also I try to leave blank in password flied, it also failed, I use the same password in the user(not admin), I can login, is it the bug of wizard, if this situation need to reset the router, can I take the config first?
View 10 Replies
View Related
Nov 3, 2011
I have a 2x Cisco 3750G switches (Stacked) that are part of an IP Video Surveillance System .All network is set to 1 VLAN (VLAN 1 default).The Cisco SWs ( Core ) are configured with IGMP Querier + Snooping .Connected to the Cisco SWs are 4 Fiber Rings(Loops) for redundancy . RSTP and IGMP Snooping are enabled on all the network SWs .Network Architecture Figure :
When all Fiber Rings (Loops ) are connected , the Cisco and Ring SWs spanning-tree tables show the blocked and forwarding ports properly .I am able to connect all my IP Cams + Encoders to the Ring SWs and connect my Servers + WorkStations to the Cisco SWs to record and view the multicast ip streams .All streams from Rings 1 ,3 and 4 are getting normally to the Servers + WorkStations through multicast ( IGMP Snooping are filled correctly on the Cisco and non-Cisco SWs ) . All multicast streams are joined normally except for Ring 2 .The Multicast streams passing through Ring 2 will operate normally for around 2 hours then after that the Fiber SWs begin to flood their multicast traffic causing the cams on the same switch to drop off the network .
I checked the Configuration of all the SWs on Ring 2 but all are are the same .
What is weird is that I have to set all the streams to unicast to stop the flooding just on Ring 2 (All other rings are not affected ) then after some time if I enabled a video multicast stream on one of the SWs of the Ring it will be streamed properly to the Servers + WorkStations ( All IGMP tables along the way will be filled properly ) then again after 2 hours or so , the flooding will start again suddenly and all IGMP table entries for the SW on Ring2 will be empty . No problem occurs on the other Rings which have more multicast streams .
View 0 Replies
View Related
Feb 21, 2011
Can I use a mobile internet modem on the USB port?
View 10 Replies
View Related
Feb 18, 2011
I installed the DIR 655 router using the install disk. I hooked up my Vista desktop machine via the ethernet port. I also activated a Roku box and my Itouch successfully via the wireless.I turned MAC filtering on and manually entered the MAC addresses for the three devises. Everything worked fine.After I rebooted the desktop, I could no longer get to the internet via the desktop connected through the ethernet. The Roku Box and I-Touch both work fine and enjoy a strong wireless connection.I've tried rebooting the desktop several times, but still can not access the web. I also can not access the router by typing in 192.168.0.1. I entered the configsys stuff and verifited that I am using the right numbers.
View 14 Replies
View Related
Oct 19, 2011
DLink DIR655
H/W Ver B1
F/W Ver 2.00NA
I've configured my 655 and I can access the internet through it. Network cable from PC goes to the DLINK, DLINK to the DSL modem, DSL modem to the big scary internet. This all works great. Now for the Wi Fi.I've set up the Wi Fi on the 655 and can both see and connect to my newly configured home network from my laptop, but I can not access the internet from the laptop.
View 2 Replies
View Related
Feb 14, 2013
I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients. I have my primary computer/desktop PC connected via wired connection. I also have several wireless clients (laptop, iPad, iPhones, etc.). All have been performing normally. However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.
It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website. This continues as long as I'm using the desktop PC. When I stop using the desktop, the weather bridge resumes normally.
I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it. It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work. I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.
On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion. According to the settings, it can do 10 or 100, full or half. I have it set to AUTO.
View 3 Replies
View Related
Sep 5, 2011
Watch TV on LCD monitor? To be exact, this monitor:
[code]....
View 2 Replies
View Related
Feb 12, 2012
wat is wrong with my new ps3 160 gig it want at all play videos but i still have full access to going on sites and on top of that i cant get rid of trend micro in the tool bar
View 1 Replies
View Related
Jun 21, 2011
My mother is hearing impaired. Can we get her bluetooth so she can hear the TV without driving everyone else deaf?
View 2 Replies
View Related
May 26, 2013
Is it possible to convert multicast streams (224.0.0.1:1234) to unicast (Receiver 10.0.0.1:1234) at the router level.
View 4 Replies
View Related
Feb 6, 2011
theres something wrong with my computer, Youtube works fine, but videos on facebook, and other websites dont work. Even when i watch live sports streams, it doesnt work. The video takes ages to load, and keeps freezing and lagging. I have tried many websites and none of them work
View 1 Replies
View Related
Nov 29, 2011
l do not know how to download software that will enable me to watch hd movies on my pc.
View 2 Replies
View Related
Apr 28, 2012
There's a splitter (rca home theatre 5-1000mhz) between the tv and the Mac Whenever both cables are hooked up, the internet always cuts out.The wireless on the ps3 disconnects when the internet upstairs is connected.
View 1 Replies
View Related
Oct 25, 2012
Have a look at the diagram showing my router/modem setup here:I'm not sure the proper terminology or how to say this but I would like Router A to broadcast 1 IP and and Router B to broadcast another.For "business" reasons I need my "normal" IP on router A and for "pleasure" reasons, I want to have different DNS on router b.I'm in canada and I'm using a DNS service to make it appear like I'm from the US.
View 17 Replies
View Related
Dec 19, 2011
What I want to do is be able to control my PC from my TV screen. I mean I want to be able to stream a live ball game or movie I have on my PC hard drive & see it on my TV. I heard about Roku & thought that is what I wanted or Blueray with DLNA. But Roku just pulls streams from subscriber sites like Netflix & Hulu. DLNA will allow you to view video you have on your HDD but will not let you stream live feeds like watching a live event that is streaming on your PC. Is there any hardware out there that will allow me to have whats on my PC screen on my TV screen via wifi (or other means)?
View 2 Replies
View Related
Mar 24, 2013
We have a Netgear N600 hookedup to DSL line.
1. Now can't watch Netflix movies through Sony bluray or on computer.
2. Takes an hour to bring up documents to print.
3. While trying to load a page connection to server will be reset.We connected one of the computers to the modem. didn't work any better.
View 3 Replies
View Related
Apr 11, 2012
im looking for a wifi device that i can watch movies from my laptop on my tv.
View 1 Replies
View Related
Jan 24, 2011
How do I connect my broadband router to my panasonic television to watch iplayer
View 4 Replies
View Related
Feb 5, 2013
I just purchased a Belkin N300 and it's advertised as being able to video chat as well as have two computers connected to it. I can't even watch youtube videos with just one laptop connected because the ads take 5 minutes to load. Is this normal behavior for this router? Do I need to upgrade to be able to Skype?
View 2 Replies
View Related
Nov 18, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
View 1 Replies
View Related
