Pinging Node But Unable To Access
Dec 26, 2012I am able to ping the node but when i try to access the systm using backslash i am uable to access it and an error of host inaccessible.
View 1 Replies
ADVERTISEMENT
System Pinging But Unable To Access?
Jul 4, 2012i can ping the other system but i can not access tthat system.. error message shows that path does not found.
View 6 Replies View RelatedUnable To Reach Node Behind Wifi
Mar 12, 2013I am facing the following problem. SmartPhone is connected WiFi hotspot. Suppose SmartPhone ip is 10.0.2.2 and hotspot ip is 10.140.13.12. I am able to send data from smartphone to a server(over internet) which has static ip and sender details in server are hotspot ip. Problem is sending data from server back to smartphone. Tried sending to 10.0.2.2(smartphone) from server but packets are not received.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: 1.1.1 / Unable To Register ISE Inline Posture Node
Oct 19, 2012i'm stuck at registering inline posture node to primary node. I doing fresh install both ISE appliance using version 1.1.1, patched all 3 available patach version after install. AD and DNS were perfectly configure, ping using hostname able to resolve Everything set, so both PSN and iPEP generate CSR and ready to let CA server to signed. But anyway this is the outcome i get Error message "Unable to authenticate. please check server and CA certificate."
01. - What certificate template to be use primary node and inline posture node? I having problem the CA certsrv won't show computer template for inline posture node. can i use web server template and on the extension include client autthenticaiton andserver authentication on this case?
- What certficate template use for primay node CSR?
02. According to Cisco ISE user guide 1.1.1, it mentioned "Creating certificate trust list in Primary ISE Node"
So first action is importing Root and CA certificate . my rootCA.cer import to certification operation certifcate store, while CSR generated then Bind CA certificate. question, should i check anything like "Tust for client authentication" checkbox or any other option to be check? How about Inline Posture node, should i export the CA certificate and import to primary node's certificate store?
Cisco :: Prime LMS 4.1 - Do Access Points Use Up A Node Count License
Jan 18, 2012I wish to purchase Cisco Prime LMS 4.1, particularly Cisco part # R-LMS-4.1-500-K9 which support 500 Cisco nodes.We have about 360 Cisco switches/routers/ASA/FWs/WLCs so the 500 nodes license would seem to suffice for now & for future growth.We also have about 200 lightweight APs that are managed & monitored by our WLC/WCS/Navigator environment.According to the device support documentation for LMS, it supports and I assume will auto-discover these APs.Does that mean these APs will use up node licenses on LMS even though management of the APs is done by WLC/WCS? If so is there an easy way to suppress discovery of APs by LMS so we don’t have to purchase extra node licenses for LMS? Or, does LMS offer additional support features for wireless APs not already offered by WLC/WCS/Navigator?Just trying to understand how many network node licenses for LMS I have to purchase.
View 3 Replies View RelatedCisco Switching/Routing :: VLAN810 / Same VLAN Host Unable To Pinging
Feb 4, 2013i configured the VLAN810, with DHCP services, while i try to ping the host which is connected to gi 1/0/2 from my gi 1/0/1 , i can't ping the same vlan host , while i try to debug ip icmp its showing ,
C3750XB11#sh running-config
Building configuration...
Current configuration : 12053 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
[code]....
Cisco :: How To Trace Which Node Blocked ESP Traffic
Sep 20, 2012Our ESP traffic is passing through multiple nodes and we can not establish the tunnel. and I want to know which node blocked ESP traffic. How to trace which node blocked ESP traffic ?
View 5 Replies View RelatedCisco Routers :: WRV200 - Create 3 Node WAN Using VPN Connections
Jul 11, 2012I have 3 WRV200 that I want to install in 3 cities.I want each router to have its own Internet connection from the local ISP.I then want each router to connect to the other 2 routers and create a 3 node WAN using VPN connections.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ISE 1.1.2 - Installing Same Certificate In Every PSN In Node Group
Mar 13, 2013to grant not to show the certificate error adevertise to all clients connecting to guest services (because obviously they don't have the CA root certificate of our company), we have purchased a wildcard certificate from Verisign in order to work with all of our PSN Common Names and friendly url for sponsor and mydevices. But when I try to import it to more than one PSN the following error message is shown " The certificate already exists in the data base".How can I import the same certificate (with the same private key) in every PSN in a node group?
We have ISE 1.1.2
Cisco AAA/Identity/Nac :: ISE 1.1.3.124 Secondary Node Not Reachable After Registration
Jun 1, 2013I'm constantly seeing that the sync and replication status for my secondary admin/monitor node in the primary node as node not reachable. The secondary still thinks it is in standalone mode. When I run the ISE diag tool connectivity tests I am able successfully ping the devices from each other using both hostname and ip and the nslookup also works fine between both nodes. Ping and nslookups also work from different networks within the environment. The two nodes are in the same vlan on a 6500 vss pair but on different switches of the pair.
View 6 Replies View RelatedCisco WAN :: Connecting Remote Node To Server Behind ASA5505
Oct 25, 2012I have several locations with time clocks (a Kronos application) on a small home network with outgoing traffic wide open.I have a server in my office behind an ASA5505 router/firewall, also with outging traffic wide open. I have tried taking the device off of the remote network and giving the it a public, static ip address so it is actually on the internet, yet the server cannot see the device, but it can ping it. I was advised to put the device on the remote private network and set up a virtual server using port 8080 at the remote location. The server is still unable to see the device. I also set up a virtual server for VNC. When I am on my server on my work network behind the ASA5505, I can start my VNC viewer and attach to the device at the remote site using the IP of the router (apparently the device has a build in VNC server).
I have also tried to NAT my server to a public IP, I have set up incoming and outgoing rules on the firewalls at both ends.this should be a fairly straight forward connection.
Cisco Firewall :: PIX 515e Accessing Node On DMZ From Inside Interface
Mar 31, 2013I have a PIX 515e running version 7.2(4).I have 2 interfaces - DMZ3 (sec lvl 50) and LAB (sec lvl 100) behind the pix. There is also the OUTSIDE interface (sec lvl 0) which connects to the internet.In DMZ3 I have a webserver - x.x.124.217/24 (host is NATed via static command to public IP)In LAB I have a server - x.x.1.203/24 (entire range is NATed via NAT/Global statements to public IP)The server in LAB needs to access a webserver in DMZ3. From the internet both of these hosts have public addresses that are NATed into the inside addresses. I can reach the webserver from the internet, but not from the LAB interface.I think I have to add a static command so that the LAB host can access the DMZ3 host without accessing the internet.
View 3 Replies View RelatedCisco Security :: Adding 3 Node ASA5510 / Active / Passive Cluster
Jul 25, 2012we operate an active/passive cluster with 2 ASA5510 in Routed Mode. Is it possible to add another node, so that we have one active and two standby nodes in the cluster? Unfortunately, I have found no documentation on this .... The data sheet say only up to 10 nodes can be mentioned as a VPN load balancing cluster.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ISE-3315 / Procedure To Join ISE Appliance Become Inline Posture Node
Oct 17, 2012I would like to ask, given that i got 2 units of ISE-3315 appliance, one need to be primary node for admin-policy service-monitoring, another unit then become Inline posture node.For the preparation on line posture node, what shoud i do on it?
01. For the unit ready to become inline posture node, so I just boot it, install the OS from sractch (using version 1.1.1), then start the initialize setup etc, like Normal setup?
02. Before i regieter, what is the deployment nodes i should select for inline posture node unit? provided the admin-policy service-monitoring will become primary node, and registration for inline posture node will be next action.
My Pc Not Pinging Certain Switches
Jun 27, 2011I found that Alternate LAN card will support.After replacing another LAN card i can ping all switches.But i want to know why my pc not pinging certain switches connected in network.Even i cleared the port security
View 5 Replies View RelatedConnected But Computer Does Not See Other Through Pinging?
Aug 19, 2011One computer does not see the other through pinging...but somehow we are connected...strange i know. My confusion ( being network illerate ) is with the names and etc. and some terminologies ie ..client? host? I have found in the past when someone triesthey use words or areas that do not coincide with my system...which is laptop with win 7 prem and desktop XP sp3
View 2 Replies View RelatedPinging Between NIC Cards On Same Machine?
Feb 23, 2011I have 2 NIC cards on the same machine running Redhat 9.I need to setup the machine in such a way that both cards are in the same subnet but card on port eth1 can be reached through card on port eth0.I tried modifying the iptables (with the limited knowledge that I have on it,used google) and even tried turning it off.I also tried setting files /proc/sys/net/ipv4/ip_forward and /proc/sys/net/ipv4/conf/all/proxy_arp to 1 but was unable to ping from IP address on port 0 to IP address on port 1 and vice-versa
View 1 Replies View RelatedCisco VPN :: Can't Bring The VPN Up By Pinging From ASA 7.2
Jan 5, 2012I've attached my ASA's config. I can't bring the VPN up by pinging from the ASA but the VPN will come up when someone pings from behind the ISA server. So the problem seems to be routing/NAT on my ASA because my pings aren't being directed out the tunnel. The VPN in question has 64.106.x.x as the peer and AES 256/SHA for phase 1 and 2.
View 2 Replies View RelatedCisco :: IP Is Not Pinging By Other System In The Network
Aug 29, 2012my system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server
View 1 Replies View RelatedVPN Connection Dies When Not Constantly Pinging
Jul 2, 2011I will be moving away from my home computer but will still want access to it so I am trying to set up a VPN between it (home computer is windows 7) and my fedora 15 machine. They are currently on the same 192.168.1.0/24 network so I'm wondering if that may be the cause for my troubles.
Here's my setup:
Fedora 15 (192.168.1.3) is running the PPTP server with pptpd and gives 192.168.1.66 to any vpn client that connects to it./etc/pptpd.conf only has "localip 192.168.1.3" and "remoteip 192.168.1.66" options in it /etc/ppp/options.pptpd has "refuse-pap, refuse-chap, refuse-mschap, require-mschap-v2, require-mppe-128, proxyarp, lock, nobsdcomp, novj, novjccomp, nologfd, debug, dump" options Windows 7 (192.168.1.6, 192.168.1.66) is the client and I have it set to use connect to the public IP address of my router, PPTP, require encryption, only allow mschap-v2, don't use gateway in ipv4 properties.Both machines are connected to the same Belkin router (192.168.1.254) and I can ping locally to and from each computer no problem. The problem is my VPN connection is very inconsistent. I will open a ftp connection to 192.168.1.66 from 192.168.1.3, login, start uploading a file, get about 10MB uploaded, and then the VPN connection will die and the upload will fail. But, when I have "ping 192.168.1.66" running while uploading, the connection stays alive.
Pinging Router Fails 5% Of The Time?
Sep 20, 2011Lately I've noticed that my internet connection has been less than stellar. I will be playing an online game or surfing the web, and every so often I'll freeze up or things just won't run smoothly. My network consists of the following...All of my computers and devices connect to a Cisco 16 port gigabit switchThe switch then connects to a Peplink 20 Dual WAN routerThe router connects to a cable modem as well as a DSL modemThe other day I was trying to diagnose the problem, as well as update the firmware of the router. While I was on the main "status" page, I noticed an error saying that I couldn't connect to the router. It quickly cleared and everything was working fine. This of course made me think that my issues have to do with my connection to the router, and not with the internet service itself. I then tried ping -t to two other computers on the network, as well as the router. After 5 minutes of pinging, the connections to the two computers had zero fails, while the router connection failed about 5% of the time. I ran the same check from the other computers on the network, with similar results.So, I know that the issue lies with the router (I think), but that's where my brainstorm ends.
View 4 Replies View RelatedPinging Non-existent Devices On Subnet?
Mar 7, 2013I'm currently taking a networking course and was having some difficulty answering the following questions and could use a little clarification.Question: When pinging a non-existent device on your subnet, why doesn't the source node issue a ICMP echo request.My thoughts on this was because there was not a receiving node therefore any ICMP packets were not issued.Question 2: when pinging another non-existent device but not on your subnet, why doesn't the source node issue a ICMP echo request.
View 2 Replies View RelatedCisco WAN :: 3945 Channelized E1 Not Pinging Self
Mar 3, 2013We have recentrly replaced a 1700 router with Cisco 3945 router (Core Router) and the Channalised E1 interface is configured as given below: [code]
The issue happens intermittenly and makes network not reahable.Status of the links are UP/UP - No traffic forwarded through the link (Ser 0/0/0:1 and Ser 0/0/0:2) and at the same time not able to ping the local IP Address as well - 10.5.10.1/10.7.10.1.No issue on the Ser 0/0/0:0 link - Working fine.If you replace the new router with the old one all are working fine.
Cisco Firewall :: Pinging Across 2 ASA 5510s
Dec 16, 2012Here's my basic setup:
Computer A:
IP- 192.168.0.3
Mask- 255.255.252.0
Gateway- 192.168.0.2
[Code]....
Computer A can ping Firewall 1 and Firewall 2, but not Computer B. Computer B can ping Firewall 1 and Firewall 2, but not Computer A. Firewall 1 can ping Firewall 2, Computer A, and Computer B. Firewall 2 can ping Firewall 1, Computer A, and Computer B.
Why can't the computers ping each other, but their default gateways can? I've specifically allowed ICMP any any on all the affected interfaces.
Cisco :: ARP Cache Contents When Pinging An Outside Host?
Apr 22, 2013If we have the following setup:Host A (IP :192.168.1.1, Prefix/length : 24, GW : 192.168.1.254) connected to the Router A on int Fa0/1 (IP : 192.168.1.254), Router A is connected to Router B, Host B (IP :192.168.2.1, Prefix/length : 24, GW : 192.168.2.254),connected to Router B on int Fa0/1 (IP : 192.168.2.254).Using the mentioned setup, after Host A pings Host B successfully, which entry will be in the ARP cache of Host A to support the transmission ?.
View 3 Replies View RelatedRandom Request Time Out When Pinging Gateway IP
Jul 6, 2011I've had some issues with my internet connection lately. Occasionally I would have connection interruptions even when I am just browsing the web with no downloads in the background or anything like that.The strange thing is that connection fails right at the vey beginning - if I constanly ping the gateway, I will see that among the continous pings of 1ms or less, every once in a while I would have several "request time out" messages.My laptop is connected directly to the router with a 6 feet cable. I replaced the cable and it still happens.What I also noticed is that if I am online in the MMORG I am playing, I can stay online for long hours, however when I start browsing the web, I would get disconnected pretty soon. So I think somehow browsing (and downloading at high speeds, which is understandable) somehow triggers these timeouts. I dont know what to make out of it.
View 1 Replies View RelatedConnected To Internet But Getting General Failure When Pinging
May 1, 2012I am have 3 machines int he house connected to the internet but one does not have internet access. It shows connected to the wireless network and from the command prompt there is an ip assigned to the laptop. But i cannot ping the gateway or any ip I get General Failure.
View 1 Replies View RelatedCisco WAN :: 2821 - Pinging Loopback Address
Sep 11, 2012I have a cisco 2821 and have configured a llopback address which I want to use for management, however, I am unable to ping it from a device attached to GigabitEthernet0/0
View 1 Replies View RelatedCisco Switching/Routing :: Getting RTO While Pinging 3750?
May 29, 2013I am getting RTO while pinging my L3 switch 3750 that happened after restarting switch,i have restarted it because I am not able to browse internet through URL,i am able to do it trough ip address, so I restarted it not I am getting RTO.
View 1 Replies View RelatedPinging Local Router But Receive Direct Reply From ISP?
Oct 3, 2012Lost Internet connectivity at home. connected via dsl line to my isp.when i issued ipconfig /all command i noticed that default gateway IP addr was a global ip addr. (77.36.x.x) instead of the usual private address 192.168.1.1. DHCP server had IP address 58.206.x.x when i issued ping 192.168.1.1 command, i got this output: "reply from 77.36.x.x: destination host unreachable" i couldn't access my router's configuration menu by typing 192.168.1.1 in web browser's address field.it's very interesting, because i had network issues before but could access my router's config menu and ping it. but now, i cannot reach my local router but receive reply from ISP's router.
View 10 Replies View RelatedCisco WAN :: 887V VDSL Router / Pinging From The VLAN1?
Apr 7, 2011I have a problem with my Cisco 887V VDSL-router. The router gets a ip-address with dhcp from my provider. That works fine. I also can ping from the router:
routerVdslTestNew#ping google.ch source vlan 1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 74.125.79.99, timeout is 2 seconds:
Packet sent with a source address of 10.10.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/48/52 ms
My problem: If I want to ping google from a computer in the VLAN1 the ping doesn't work.
C:UsersXXXXXX>ping 74.125.79.99
Ping wird ausgeführt für 74.125.79.99 mit 32 Bytes Daten:
Timeout.
Cisco Firewall :: 5580 Not Pinging Virtual Interface
May 1, 2012I have got new cisco ASA 5580 running 7.2(4) on it when i am trying to configured Virtual interface on vlan 400 in Gi0/0.400 to LBASE.now the problem is from my MZ zone 10.242.107.17 to Lbase virtual interface 10.242.103.1 iam not able to ping.
View 2 Replies View RelatedCisco WAN :: 4500 Not Pinging Directly Connected Devices
Nov 3, 2012We had a problem where a 4500 would not ping directly connected devices dispite being able to telnet to them and also view them in CDP. It was mostly forwarding packets between devices but some hosts could not connect to others.
View 1 Replies View Related
