Random Request Time Out When Pinging Gateway IP
Jul 6, 2011
I've had some issues with my internet connection lately. Occasionally I would have connection interruptions even when I am just browsing the web with no downloads in the background or anything like that.The strange thing is that connection fails right at the vey beginning - if I constanly ping the gateway, I will see that among the continous pings of 1ms or less, every once in a while I would have several "request time out" messages.My laptop is connected directly to the router with a 6 feet cable. I replaced the cable and it still happens.What I also noticed is that if I am online in the MMORG I am playing, I can stay online for long hours, however when I start browsing the web, I would get disconnected pretty soon. So I think somehow browsing (and downloading at high speeds, which is understandable) somehow triggers these timeouts. I dont know what to make out of it.
View 1 Replies
ADVERTISEMENT
Mar 12, 2012
One of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies
View Related
Sep 20, 2011
Lately I've noticed that my internet connection has been less than stellar. I will be playing an online game or surfing the web, and every so often I'll freeze up or things just won't run smoothly. My network consists of the following...All of my computers and devices connect to a Cisco 16 port gigabit switchThe switch then connects to a Peplink 20 Dual WAN routerThe router connects to a cable modem as well as a DSL modemThe other day I was trying to diagnose the problem, as well as update the firmware of the router. While I was on the main "status" page, I noticed an error saying that I couldn't connect to the router. It quickly cleared and everything was working fine. This of course made me think that my issues have to do with my connection to the router, and not with the internet service itself. I then tried ping -t to two other computers on the network, as well as the router. After 5 minutes of pinging, the connections to the two computers had zero fails, while the router connection failed about 5% of the time. I ran the same check from the other computers on the network, with similar results.So, I know that the issue lies with the router (I think), but that's where my brainstorm ends.
View 4 Replies
View Related
Jul 18, 2011
recently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
View 1 Replies
View Related
May 3, 2011
I'm using a Lenovo Y 560 using a wireless connection to an Apple Airport extreme. I have been using this set up for a few months without any problems. However, recently, my computer has been disconnecting at random time for 30-60 seconds. There isn't any lag before or after and this occurs when gaming or browsing. The weird thing is, there are about 15 other PCs and Macs using the airport and none of them are experiencing this problem. I used my 'one key recovery' button and restored my computer to the factory default and updated/reinstalled all wireless drivers and the problem still persists. At this point I'm stumped, any suggestions?
View 7 Replies
View Related
Apr 15, 2012
The problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.
View 1 Replies
View Related
Jan 24, 2012
I have 2 networks ,one is 135.7.31.0/24 for intranet to connect remote office gateway is 135.7.31.253. other is airtel broadband to (network 192.168.1.0/24)connect internet GW 192.168.1.1.both are connected in l2 switch(cisco cat exp500) now I assign 2 ip addresses and gateway in win xp PC with TCP/IP advance settings also set the different metrics for 2 networks , now problem is I cannot connect remote office and internet simultaneously, only one networks connect at a time,
View 3 Replies
View Related
Feb 16, 2013
ACE version is A5_2_1.the transfer was carried out by the following procedures.1) C6509 vlan set2) client and serverfarm vlan svclc vlan-group not included.3) ACE configuration. - FT vlan 999 - Client vlan 20 - Serverfarm vlan 154) ACE services enable
Problem occurs, I know why I do not know.
Was configured as follows.
======>> MSFC Configure (C6509#1 and C6509#2)
svclc autostatesvclc multiple-vlan-interfacessvclc module 4 vlan-group 150svclc vlan-group 20 999
C6509#1interface Vlan20 ip address 172.16.20.2 255.255.255.0 no shutdown
ip route 192.168.15.0 255.255.255.0 172.16.20.100
[Code]....
View 1 Replies
View Related
Jan 22, 2012
I have newly deployed network. I have two ASA5520-AIP20-k9. both connected to ISP and configured as Active/standby failover. the ASAs were working fine at first but later on, the internet connection becomes very slow. the ping reply i am getting from my next hop(ISP router) varies during the peak hour is some times in 2000 msec or above but during off hours, the ping reply time is 1 and 2 msec. when I directly connect my laptop to the link that comes from the ISP its ping reply is 1msec and 2msec. I thought the ping reply of the ASA5520 to the ISP gateway should be constant and should be 1 and 2 msec regardsless of the traffic passing through the firewall.
View 1 Replies
View Related
Dec 29, 2012
Network running about 60 computers, most of which are running windows 7 professional. Some are on a domain, some are not.At (seemingly) random times, some computer on the network will lose the ability to browse websites (including the web interfaces of networked devices). I can't identify what circumstances cause this to occur. I only find out about it when someone calls me.From the affected computer:I can ping sites I can ping our Cyberoam UTM (which acts as our DNS, DHCP, and firewall)disabling/enabling connection doesn't fix the problem releasing/renewing ip doesn't fix the problem flushing dns doesnt fix the problem uninstalled antivirus on two test machines, problem still randomly manifests.replaced the Cyberoam with newer model users have claimed that if they wait a long period of time (40+ minutes) the problem sometimes resolves.rebooting the computer resolves the issue until it randomly occurs again changing the computer's mac address also resolves the issue until it randomly occurs again.
View 3 Replies
View Related
Jun 27, 2011
I found that Alternate LAN card will support.After replacing another LAN card i can ping all switches.But i want to know why my pc not pinging certain switches connected in network.Even i cleared the port security
View 5 Replies
View Related
Aug 19, 2011
One computer does not see the other through pinging...but somehow we are connected...strange i know. My confusion ( being network illerate ) is with the names and etc. and some terminologies ie ..client? host? I have found in the past when someone triesthey use words or areas that do not coincide with my system...which is laptop with win 7 prem and desktop XP sp3
View 2 Replies
View Related
Feb 23, 2011
I have 2 NIC cards on the same machine running Redhat 9.I need to setup the machine in such a way that both cards are in the same subnet but card on port eth1 can be reached through card on port eth0.I tried modifying the iptables (with the limited knowledge that I have on it,used google) and even tried turning it off.I also tried setting files /proc/sys/net/ipv4/ip_forward and /proc/sys/net/ipv4/conf/all/proxy_arp to 1 but was unable to ping from IP address on port 0 to IP address on port 1 and vice-versa
View 1 Replies
View Related
Jan 5, 2012
I've attached my ASA's config. I can't bring the VPN up by pinging from the ASA but the VPN will come up when someone pings from behind the ISA server. So the problem seems to be routing/NAT on my ASA because my pings aren't being directed out the tunnel. The VPN in question has 64.106.x.x as the peer and AES 256/SHA for phase 1 and 2.
View 2 Replies
View Related
Aug 29, 2012
my system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server
View 1 Replies
View Related
Jul 2, 2011
I will be moving away from my home computer but will still want access to it so I am trying to set up a VPN between it (home computer is windows 7) and my fedora 15 machine. They are currently on the same 192.168.1.0/24 network so I'm wondering if that may be the cause for my troubles.
Here's my setup:
Fedora 15 (192.168.1.3) is running the PPTP server with pptpd and gives 192.168.1.66 to any vpn client that connects to it./etc/pptpd.conf only has "localip 192.168.1.3" and "remoteip 192.168.1.66" options in it /etc/ppp/options.pptpd has "refuse-pap, refuse-chap, refuse-mschap, require-mschap-v2, require-mppe-128, proxyarp, lock, nobsdcomp, novj, novjccomp, nologfd, debug, dump" options Windows 7 (192.168.1.6, 192.168.1.66) is the client and I have it set to use connect to the public IP address of my router, PPTP, require encryption, only allow mschap-v2, don't use gateway in ipv4 properties.Both machines are connected to the same Belkin router (192.168.1.254) and I can ping locally to and from each computer no problem. The problem is my VPN connection is very inconsistent. I will open a ftp connection to 192.168.1.66 from 192.168.1.3, login, start uploading a file, get about 10MB uploaded, and then the VPN connection will die and the upload will fail. But, when I have "ping 192.168.1.66" running while uploading, the connection stays alive.
View 1 Replies
View Related
Jul 4, 2012
i can ping the other system but i can not access tthat system.. error message shows that path does not found.
View 6 Replies
View Related
Dec 26, 2012
I am able to ping the node but when i try to access the systm using backslash i am uable to access it and an error of host inaccessible.
View 1 Replies
View Related
Mar 7, 2013
I'm currently taking a networking course and was having some difficulty answering the following questions and could use a little clarification.Question: When pinging a non-existent device on your subnet, why doesn't the source node issue a ICMP echo request.My thoughts on this was because there was not a receiving node therefore any ICMP packets were not issued.Question 2: when pinging another non-existent device but not on your subnet, why doesn't the source node issue a ICMP echo request.
View 2 Replies
View Related
Mar 3, 2013
We have recentrly replaced a 1700 router with Cisco 3945 router (Core Router) and the Channalised E1 interface is configured as given below: [code]
The issue happens intermittenly and makes network not reahable.Status of the links are UP/UP - No traffic forwarded through the link (Ser 0/0/0:1 and Ser 0/0/0:2) and at the same time not able to ping the local IP Address as well - 10.5.10.1/10.7.10.1.No issue on the Ser 0/0/0:0 link - Working fine.If you replace the new router with the old one all are working fine.
View 1 Replies
View Related
Dec 16, 2012
Here's my basic setup:
Computer A:
IP- 192.168.0.3
Mask- 255.255.252.0
Gateway- 192.168.0.2
[Code]....
Computer A can ping Firewall 1 and Firewall 2, but not Computer B. Computer B can ping Firewall 1 and Firewall 2, but not Computer A. Firewall 1 can ping Firewall 2, Computer A, and Computer B. Firewall 2 can ping Firewall 1, Computer A, and Computer B.
Why can't the computers ping each other, but their default gateways can? I've specifically allowed ICMP any any on all the affected interfaces.
View 6 Replies
View Related
Apr 22, 2013
If we have the following setup:Host A (IP :192.168.1.1, Prefix/length : 24, GW : 192.168.1.254) connected to the Router A on int Fa0/1 (IP : 192.168.1.254), Router A is connected to Router B, Host B (IP :192.168.2.1, Prefix/length : 24, GW : 192.168.2.254),connected to Router B on int Fa0/1 (IP : 192.168.2.254).Using the mentioned setup, after Host A pings Host B successfully, which entry will be in the ARP cache of Host A to support the transmission ?.
View 3 Replies
View Related
May 1, 2012
I am have 3 machines int he house connected to the internet but one does not have internet access. It shows connected to the wireless network and from the command prompt there is an ip assigned to the laptop. But i cannot ping the gateway or any ip I get General Failure.
View 1 Replies
View Related
Sep 11, 2012
I have a cisco 2821 and have configured a llopback address which I want to use for management, however, I am unable to ping it from a device attached to GigabitEthernet0/0
View 1 Replies
View Related
May 29, 2013
I am getting RTO while pinging my L3 switch 3750 that happened after restarting switch,i have restarted it because I am not able to browse internet through URL,i am able to do it trough ip address, so I restarted it not I am getting RTO.
View 1 Replies
View Related
Oct 3, 2012
Lost Internet connectivity at home. connected via dsl line to my isp.when i issued ipconfig /all command i noticed that default gateway IP addr was a global ip addr. (77.36.x.x) instead of the usual private address 192.168.1.1. DHCP server had IP address 58.206.x.x when i issued ping 192.168.1.1 command, i got this output: "reply from 77.36.x.x: destination host unreachable" i couldn't access my router's configuration menu by typing 192.168.1.1 in web browser's address field.it's very interesting, because i had network issues before but could access my router's config menu and ping it. but now, i cannot reach my local router but receive reply from ISP's router.
View 10 Replies
View Related
Apr 7, 2011
I have a problem with my Cisco 887V VDSL-router. The router gets a ip-address with dhcp from my provider. That works fine. I also can ping from the router:
routerVdslTestNew#ping google.ch source vlan 1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 74.125.79.99, timeout is 2 seconds:
Packet sent with a source address of 10.10.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/48/52 ms
My problem: If I want to ping google from a computer in the VLAN1 the ping doesn't work.
C:UsersXXXXXX>ping 74.125.79.99
Ping wird ausgeführt für 74.125.79.99 mit 32 Bytes Daten:
Timeout.
View 3 Replies
View Related
May 1, 2012
I have got new cisco ASA 5580 running 7.2(4) on it when i am trying to configured Virtual interface on vlan 400 in Gi0/0.400 to LBASE.now the problem is from my MZ zone 10.242.107.17 to Lbase virtual interface 10.242.103.1 iam not able to ping.
View 2 Replies
View Related
Nov 3, 2012
We had a problem where a 4500 would not ping directly connected devices dispite being able to telnet to them and also view them in CDP. It was mostly forwarding packets between devices but some hosts could not connect to others.
View 1 Replies
View Related
Apr 30, 2012
I have an Issue.In my networks, 1 single user is facing Network Slowness issue. i needs to check to which port user is coneected in switch to CHeck whether that port has any errors.But problem is, i am providing support from remote location.And my concern LAN segment is Very big,I have only user Ip address details,when i ping the Ip address from Core switch it is pinging. but when i give show ip arp & give Ip address then its not learning and listing out the Mac address to trace down to the specific port.
View 3 Replies
View Related
Nov 1, 2011
We have a Cisco 3640 router running c3640-is-mz.123-3g.bin Switching ports are devided into several VLans. Each VLan has its own IP subnet. We can't ping IP address X in subnet A from subnet B unless we log into the router and ping it from there first. (and then the IP address will show up in "show ip arp" command. Then we can ping X in subnet A from subnet B, and browse web on device X from subnet B, etc. )
View 6 Replies
View Related
Aug 4, 2012
last day i went to one client for the installation of C(WS-C4507R+E)
current ios :cat4500e-ipbase-mz.122-53.SG2.bin
there is only one sup engine installed and redundant slot is empty.
I installed one ethernet module in the slot 6 and it get detected working fine. I also want to install one fiber module but that module is only supported by 12.2 54 sg or later ios version.so i need an ios upgrade.
For the ios upgrade I decide to do it through svi interface For that i igive an ip address to vlan 1 (192.168.1.2) and plug cable in gigabit 6/1 and added that port into valn 1.
my laptop's ip is 192.168.1.1 @ this point i faced a rare problem the PING IS NOT WORKING.(switch is directly connected to my laptop).
Then i create another VLAN (2) and add that port into vlan 2 still ping is not getting.last thing i tried is that making that gigabit port into a routed port and result is same.
View 4 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
