Workgroup Is Not Accessible - You Might Not Have Permission To Use This Network Resource
Sep 17, 2012
I have a network with aprox 150 workstations (90% windows XP profesional, 10% Windows7 32 or 64 bit), and I receive from time to time this message ONLY on windows XP workstations:" Workgroup is not accessible.You might not have permission to use this network resource" All the time I could access the various workgroup computers by entering their IP like \192.168.1.5 or \mikepc All the time i can ping any of the workstation without any problem.All the time using Search computers on the network I find computer name.
View 1 Replies
ADVERTISEMENT
Dec 28, 2011
My network contains:
-Netgear router 1
-Dell Dimension 9150 - Windows XP pro SP3 (this machine, connected to router 1 using a pair of netgear powerline adapters
-2 x Dell Inspiron laptops - Windows 7 Home 64bit (wireless)
-iMac - OSX Snow Leopard (wireless)
-Apple Time Capsule (network drive)
-Several misc items (phones, iPod/iPad, Vodaphone sure signal, PS3)
-Network printer
-Netgear router 2 (used as wireless access point the otherside of the house, connected using a pair of netgear powerline adapters) CURRENTLY DISABLED
None of the 4 computers can see each other, but they can all print and access the Time Capsule. Now I've made sure they're all on the same workgroup and that relevant services for sharing files are running. When I try to "View workgroup computers" on the XP machine I get the error attached.
View 5 Replies
View Related
Aug 4, 2011
I have the network up and running fine except that the Windows 7 computer cannot open any files on the xp computer. It says that it doesn't have permission and the check with the network administrator. There are no passwords set up on either computer and both run as administrator. The Windows 7 Computer is hard wired to a Linksys router, and the XP uses a wireless N adapter to connect. The windows 7 computer can navigate the xp computer, it just can't open any of the files with any program. From the XP computer I can access and open anything on the Windows 7 computer?
View 6 Replies
View Related
Jun 20, 2011
We have a Windows 7 machine and two Windows XP machines. We use windows sharing of resources over a cisco wireless network. Sharing works fine on all computers for files and printers, however the DVD/CD Rom drives are not accessible.Sharing is enabled on all of these devices.When we try to access these DVD/CD Rom drives we get the following error message:Windows cannot access //computer name/resource name.You do not have permission to access //computer name/resource name. Contact your network administrator to request access.
View 1 Replies
View Related
Jul 8, 2012
I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
View 2 Replies
View Related
Mar 6, 2012
We have a network based from a server where data is stored, such as Quickbooks files, and an employee has a laptop instead of a workspace. He needs to be able to access the Quickbooks file from his computer- we are currently using Remote Desktop Connection, however it is proving to be quite complicated for him and I need to know how to set it up. I know how to set up Quickbooks and all- the issue is with adding his laptop to the workgroup.
View 3 Replies
View Related
Feb 7, 2013
I have a friend who is looking at getting a new computer and he would like to know if he'll be able to share files and printers and maybe an Internet connection between his XP Pro computer and a new Win8 one using a Workgroup with no DC.
View 2 Replies
View Related
Mar 26, 2011
I have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
View 2 Replies
View Related
Jun 29, 2012
Cannot Ping System but system can ping everyone on the network accessible
View 2 Replies
View Related
Jan 19, 2011
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies
View Related
Jan 31, 2012
We have a new router (D Link) at offices which is fixed with LAN wall points on different places , we want to use it .I connected computers to the LAN points with regular lan cables , it gives me the alert (connected) but no bytes received .I tried to ipconfig an here's what i got :Windows IP ConfigurationEthernet adapter Local Area Connection 2[CODE]
View 1 Replies
View Related
Feb 13, 2011
How I can stop the unknown workgroup user on my network?
View 1 Replies
View Related
Dec 10, 2012
I flashed my router to DD-WRT, but I could not access the web UI which is suppose to come on typing 192.168.1.1 in the web browser. . It used to come fine before but I reflashed to Asus Firmware but now I cannot access it. I have tried several times to flashing it to Asus Firmware and Back to DD-WRT, but it didn't work. When I flash to ASUS everytime my old settings are still the same. I tried assigning a static IP also.
View 1 Replies
View Related
Aug 19, 2011
My desktop is not accessible from my laptop in my home network. This seemed to happen all of a sudden.Contact the administrator of this server to find out if you have access. PS: I can access the laptop from my desktop.
View 14 Replies
View Related
Feb 4, 2012
I have a Dell D830 that was given to me. I bought a new hard drive and restored the operating system to XP. I can't access the internet now through my wireless network at home. I've tried to setup a new connection in the network connection but that's there is nothing to connect to, nothing is working.
View 3 Replies
View Related
Jun 20, 2012
My network drive is not working if i install antivirus. It shows 'access denied". if I uninstall, i can access the network drive.
View 3 Replies
View Related
Mar 4, 2011
Internet access is working fine, however I cannot get my computers to work on the network therefore cant share any files or play any network games. The router is set up as DHCP server therefore IPs are automatically assigned, this is setup on the PCs and the router. The work group is also set. Exactly same settings basically as my old router which worked fine but wont on this one! I have 3 wired PCs and a wireless laptop. 2 PCs are windows XP the other is Windows 7 and the laptop is windows 7. The wireless win7 laptop will recognize my win7 wired PC and vice versa and can share everything without problems, but they wont have anything to do with the wired winxp PCs, on top of that the 2 winxp wont recognize each other either so don't think its anything platform specific. I have also tried setting up static IPs for each computer - still no joy.This is a brand new D-Link DIR-655 Rev B1 firmware 2.00
View 3 Replies
View Related
Mar 1, 2012
I recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
View 2 Replies
View Related
Jan 30, 2011
I work in a school department and wanted to hardwire two computers in my class using a workgroup switch. I only had one data port in my class. The tech guy told me the switch could cause the entire network to crash. Is that true? I thought a switch was just a passthrough device.
View 7 Replies
View Related
Aug 18, 2012
I just got my dad's old notebook (VAIO VPC F223FB) which is better than my older one. So, I did a backup and then managed to clean install a Windows 7 Professional x64.At first I had a problem with the drivers, because the internet wasn't connecting and the USB ports weren't detecting my External Drive. So, I tested other USB port and got it. Installed the drivers and I could connect to the wireless network. But it doesn't detect the ethernet cable! And I want it detecting because then it's faster. I already tried downloading the Ethernet Controller driver. At first, I downloaded through Sony's support site but it didn't recognize the driver. Now, it recognizes but still doesn't connect it. And when I tried Solving Connection Problems, it said the network gateway was accessible but Windows can't receive Internet network traffic.
View 5 Replies
View Related
Jan 6, 2013
I am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network.I have attached running configuration for your reference.
-FW : ASA5510
-Version : 8.0
Site to Site VPN is working without any issues
View 10 Replies
View Related
Feb 1, 2013
I am experiencing one, possibly two problems with the X3000, firmware release v1.0.03:
1. When enabling guest mode, the internal network is not accessible via WLAN even for clients NOT connected via guest mode but regularly: Even non-guests but regularly connected clients can't access any internal IP but the router itself. netscan shows only the very client's IP and the router's. Only after switching guest mode entirely off, regularly connected clients can access interal IP again. netscan correctly shows the whole network. Obviously a firmware bug. BTW: Clients connected via cable do not experience this problems.
2. I am not sure about this, but after using the firmware built in "Reboot" button, the router reboots correctly. But for some reason, it is instable afterwards. It is operational for a few seconds but then reboots again. It keeps cycling. I could stop it by switching the router off and on again.
View 6 Replies
View Related
Dec 15, 2011
We received an ASA5520-K8 through Cisco's Loan program so we could demo it as a replacement for our aging Cisco 3005 VPN appliances. Given that we are a non Cisco shop (except for specific appliances like concentrators and wireless access points), I don't have a great deal of experience with Cisco gear.I started to set to setup the appliance this morning but immediately ran into issues. The 5520 doesnt seem to be acting as a DHCP server, and worse yet, I can't access the unit even if I hard code the IP on the PC being used for configuration. I have to say that I feel kinda stupid having to post this, since I actually followed the documentation avaiable for this menial task and I fully expect the problem to be a simple one. Namely, I am using two specific sources of info for connections.
View 20 Replies
View Related
Mar 26, 2012
setup my Foscam IP cam lastnight on the Wireless network using UnPn and was able to access it fine via the public IP , using another PC on the same network with no issues. However when I tried to access it from work it doesnt connect - Is there a firewall setting that im overlooking?
FYI im using a Netgear CVG824G
View 1 Replies
View Related
Jan 8, 2012
My router is a Dir-601 n150.Would the router possible be causing this problem? Some people say the router could possible be causing this problem.On my desktop I'm running, Windows Vista Home premium. On my laptop, I'm running Windows 7 Home premium. Both are set for Workgroup, file sharing is turned on, password protection is turned off.I have file sharing on both set to Guest. I have printer sharing turn on, which works fine.On both computers the only user is the Administrator, with this I set file sharing to Guest on both.When I use laptop to access files on my desktop, The public I can access with no problem. When I try to access the users folder I get an error message: Windows cannot access\ mane of computer-PC\Users/You do not have permission to access\ name of computer-PC Users. Contact your network administrator to request access.
View 3 Replies
View Related
Feb 23, 2009
I am using LMS 3.1 on windows, and getting the error while logging, You don't have permission to access /cwhp/LiaisonServlet on this server.
View 8 Replies
View Related
Apr 19, 2011
I want to share the My Documents folder from an XP machine with ONLY one user (the administrator) on a networked Win 7 machine. I have turned off simple sharing on the XP machine. I hate XP!! So complicated to do anything. Anyway, under security, I have tried share this folder, and not to share folder. I have gone into Advanced and messed around with permissions, taking out Everyone, using Admin only, using Network. At one point I ended up not being able to access My Documents on the local computer and had to jump through many hoops to change ownership and disable read only so that the user could use her own files!The problem is, under Advanced in the permissions area, I cannot see the users on the remote pc to choose which one should be allowed access. how to actually find a particular user on the Win 7 pc and give ONLY that user permission to read (not to change) the files in My Documents on the XP pc.
View 3 Replies
View Related
Jan 11, 2012
I have a folder in which there are many subfolders inside in windows server 2008 R2. I need to share it to the user pc's such that they should be able to see all the subfolders but wont be able to access the folders giving the message ''Access Denied" except for their corresponding dept. folders in which they can have read/write permissions.
View 3 Replies
View Related
May 12, 2011
Is there a way to restrict the helpdesk account only able to add/remove MAC address from the host filter table? It would be better if doing this via web or API.
View 1 Replies
View Related
Jun 30, 2011
The device or resource (127.0.0.1) is not set up to accept connections on port "895".
View 1 Replies
View Related
Apr 14, 2013
All I want to do is to share a couple of Folders, My Documents and Downloads, between two PC's on a Workgroup network.Networking is not my strongest point but up until now I have managed quite successfully.The setup is :-
1st PC is Mike-Laptoppc is on a Wireless connection to an ADSL+2 router/modem.
2nd PC is a Desktop Alexs-PC connected via cable to the same router/modem
I can share all the shared folders from the Desktop to the Laptop, but I can only share Media streaming on the Desktop from the Laptop, so I know there is a connection between the two computers. I have now turned off Media streaming to concentrate on just folder sharing.Whenever I try to access the Laptop from the Desktop I get an " Access Denied you do not have permission contact your administrator " box on the desktop.
View 6 Replies
View Related
Aug 21, 2012
I am trying to setup a VPN with AnyConnect on my ASA5510 and it works fine. I have setup an AAA server group for my Active Directory with the "NT Domain" protocol". Right now, every user is able to connect with their Active Directory credentials. I would like to restrict access to the Anyconnect VPN to only a few users in AD.
View 1 Replies
View Related
Mar 4, 2013
I am getting the following error mentioned below.
LMS 3.1 You don't have permission to access /cwhp/LiaisonServlet on this servlet
View 6 Replies
View Related
