How To Set Up Laptop On Already Configured Workgroup Network
Mar 6, 2012
We have a network based from a server where data is stored, such as Quickbooks files, and an employee has a laptop instead of a workspace. He needs to be able to access the Quickbooks file from his computer- we are currently using Remote Desktop Connection, however it is proving to be quite complicated for him and I need to know how to set it up. I know how to set up Quickbooks and all- the issue is with adding his laptop to the workgroup.
View 3 Replies
ADVERTISEMENT
Jul 16, 2011
I have a home computer which part of the home's workgroup and I have a office laptop which is part of a domain. Both of these are connected to the home wireless router and I can ping from one to the other via IP only and not by hostname. I have to access DB which is on my home computer (workgroup) from office laptop(domain). How do I achieve this? I search the internet and found we can enable sharing by IP. But my usecase will require access to the workgroup computer using hostname from laptop.
View 4 Replies
View Related
Jul 25, 2012
I am trying to connect my file server to my desktop and laptop through a workgroup, however while my Laptop and desktop recognize each other, they will not recognize the file server. I have tried what I can including setting firewall exceptions and even disabling it and nothing will change. Both the file server and desktop run Windows XP SP3 while the laptop runs Windows 7 Home Premium. the file server is connected to a 5-port router which is then connected to a 10-port hub that is connected to the gateway, while the laptop and desktop are connected to a different 5-port router which is connected to the same 10-port hub. I am saying thing also because I think it is a hardware problem since the laptop/desktop can connect perfectly as they are on the same router.
View 4 Replies
View Related
Mar 26, 2011
transferring a workgroup laptop to a office domain
View 1 Replies
View Related
Dec 30, 2011
I have a Windows 7 Laptop that need to be able to join a Home Workgroup as well as an office Workgroup. How!
View 1 Replies
View Related
Mar 21, 2012
I'm looking at a dual-channel wireless-N router that transmitts at 2.4Ghz and 5Ghz, but none of our newer laptops even recognize the 5Ghz channel. Is there a configuration setting to change what frequency laptops can recognize? Looking to put 2 newer modle Toshiba loptops on the 5Ghz channel and leave two other...older systems on the 2.4Ghz channel.
View 5 Replies
View Related
Jul 21, 2011
I am testing rogue on wire using 5508 WLC and , I have a dedicated AP configured as rogue detector and configured the switch port where the Rogue detector is connected as trunk. I have plugged in an autonomous AP with open authentication to the same switch so that it can act as a rogue. On the WLC, I can see that Autonomous AP as rogue on Wire. But along with that I am seeing another AP as rogue on wire, even though i have plugged in only one Autonomous AP to the switch.
View 3 Replies
View Related
Feb 7, 2013
I have a friend who is looking at getting a new computer and he would like to know if he'll be able to share files and printers and maybe an Internet connection between his XP Pro computer and a new Win8 one using a Workgroup with no DC.
View 2 Replies
View Related
Sep 17, 2012
I have a network with aprox 150 workstations (90% windows XP profesional, 10% Windows7 32 or 64 bit), and I receive from time to time this message ONLY on windows XP workstations:" Workgroup is not accessible.You might not have permission to use this network resource" All the time I could access the various workgroup computers by entering their IP like \192.168.1.5 or \mikepc All the time i can ping any of the workstation without any problem.All the time using Search computers on the network I find computer name.
View 1 Replies
View Related
Jan 31, 2012
We have a new router (D Link) at offices which is fixed with LAN wall points on different places , we want to use it .I connected computers to the LAN points with regular lan cables , it gives me the alert (connected) but no bytes received .I tried to ipconfig an here's what i got :Windows IP ConfigurationEthernet adapter Local Area Connection 2[CODE]
View 1 Replies
View Related
Feb 13, 2011
How I can stop the unknown workgroup user on my network?
View 1 Replies
View Related
Jan 30, 2011
I work in a school department and wanted to hardwire two computers in my class using a workgroup switch. I only had one data port in my class. The tech guy told me the switch could cause the entire network to crash. Is that true? I thought a switch was just a passthrough device.
View 7 Replies
View Related
Jun 13, 2011
I purchased 2 Cisco WAP4410N and i configured them on the network as 192.168.1.241 and .242.I see both SSIDs i created and they are named Cabo1 and Cabo2.
When i initially did the setup I was able to log into the webbased interface through both ip addresses.
I just tried again now, and Im able to log into the interface for .242 but not the .241. I am connect to the router with .241 via wireless because it is with the SSID of Cabo1.
View 1 Replies
View Related
Dec 15, 2011
I have a Linksys WRT54GL router in one building and a second router in an adjacent building. I have connected each router to a MODEM that takes me to the internet. Can I configure the two routers to talk to each other and at the same time maintaining their respective internet connections
View 4 Replies
View Related
Apr 28, 2011
We moved to a different city and trying to access any available network but can't connect. Says no network found. I click diagnose and it says "This computer does not have a wireless network adapter installed and configured"
View 1 Replies
View Related
Mar 14, 2011
I configured a remote-access vpn on an ASA 5510 version 8.3. This is the configuration [code]The vpn goes up and I get an ip address, but it's impossible to reach the internal network. [code]
View 9 Replies
View Related
Apr 14, 2012
I currently have a Cisco 2621 powering a network at our co-location facility... It's a simple setup and is working well. The colo provides a redundant HSRP uplink, so I have their two uplinks going into a Dell switch. From that Dell switch I have a uplink into FastEthernet0/0 on the 2621, configured with my routing network, and then FastEthernet0/1 gets an address from my block of routable IP. FastEthernet0/1 then plugs into another Dell switch where I have all my servers connected. The servers get public routable IP addresses and use the address on FastEthernet0/1 as their default gateway.
It's time to upgrade off the 2621, so I aquired a Cisco 2811 which has two FE interfaces, as well as a modular HWIC-4ESW switch. My question is, can I get rid of the Dell Switch A in the setup above and just use the internal switch on the 2811 to accomplish the same thing? And I if I did this, would my two uplinks from the colo plug into ports 1 and 2 of that HWIC, and then port 3 would physically connect into FE 0/0? Or can I logically do that via configuration in the Cisco? I'm not sure how all this works and haven't received the new router yet, so I thought I'd get a head start and reach out to the experts.
My second question is unrelated, but each port on the HWIC switch cannot be configured as a network interface right? I'm pretty sure they can't as they aren't considered network interfaces but just thought I'd ask.
View 11 Replies
View Related
Nov 1, 2011
I have a 4507R that will be using track and sla for failover/failback on two WAN circuits going out of my switch. Is there a way to configure an email notification, or some other sort of notification to let me know which route is being used, especially when the failover kicks over to by backup route.
View 2 Replies
View Related
Oct 31, 2011
I have configured Clientless SSL VPN for access to ASA 5540 internal network. Still I am unable to take ssh to my core switc [code]
View 5 Replies
View Related
Feb 20, 2013
I have a asa 5510 vpn client groups configured and connected to the internal network DHCP server stops giving network service dhcp and the network goes down.
View 6 Replies
View Related
Sep 5, 2008
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies
View Related
Dec 15, 2011
I have tryed to setup Lan connection on 2 PC to share wireless conenction from one to other PC.I have setup a few things but 2 PC cant see each other in workgroup(they have same name of WG).....soo i have try almost everything but didnt fix it
First PC(Host):Win XP PRO SP3
Second:Win XP PRO SP3
View 11 Replies
View Related
May 9, 2011
My partner and I have 2 notebook PCs and we have a wireless moden/router. I used to see my partner's PC in the Workgroup and share the printer before I reloaded windows XP Home in partner's PC. I added his PC to the Workgroup but can't see him in Workgroup from my PC anymore?
View 2 Replies
View Related
Jul 21, 2011
I have an older Linksys 11g router, two pc's with Windows 7 and a bunch of PC's with Windows XP that I need to LAN.Is there a simple way to do it?
View 1 Replies
View Related
Oct 15, 2012
How do i add a computer to a workgroup?
View 1 Replies
View Related
Jun 9, 2011
I cannot join domain it saying that "Computer name changes", A domain controller for the domain MyDomain could not be contacted.”. We have domain and workgroup, Actually first its already joined the domain, but I want to map the sharedrive inside the workgroup but I cannot map. Then I change to join workgroup. After I boot up I cannot log in with that user, I log in with administrator and the user is dissappear in the "User Account", but the profile inside document and setting still left surprise. I don't know why Now I create one more user, it can map to share drive also share folder. also can see all other network computer. But only left one is I cannot join the domain. I need this one because of we don't let our user using as administrator account. Before I testing this one I should backup, but now the time
View 2 Replies
View Related
Mar 18, 2011
I have a desktop PC running WinXP I recently got a laptop running Win7. I Set both of them up with the same workgroup name, and now my XP machine can see and access my laptop, but my lap can't see my XP machine. If it makes any difference, I can remote into my XP from my laptop, but that's not what I need.
View 3 Replies
View Related
Feb 2, 2011
We have two different groups in network say 'A' and 'B'. My network is B. I can view the computers in my group simply by clicking "view workgroup computers". I wonder how I can view the computers in group 'A'
View 2 Replies
View Related
May 11, 2011
I have two computers, one that is running Windows XP SP3 and the other which is running Windows 7.My aim is to access a folder on the Windows 7 computer from the Windows XP computer via the workgroup.When on the Windows XP computer, I cannot view Workgroup computers.I have disabled Windows firewall & uninstalled my other firewall.The XP computer can ping the Win7 computer by name and local IP. However, the Win7 computer can only ping the XP computer by local IP and not computer name.
View 1 Replies
View Related
Aug 11, 2012
My computer was connected to a workgroup, we shared the same internet wireless connection, my printer is shared, but my officemate can't find my computer in their network places... I try all the ways given from the internet but nothings change... I'm been working for this for 2 days already
View 7 Replies
View Related
Jul 17, 2011
I have a few laptops at home and one desktop. I also have a work laptop which I carry to work every day. I have a lan at home. The computers are connected through a wireless router though my pc is connected through a lan cable. We are able to share files and content.
I sometimes connect my office laptop at home. Though the laptop connects to the network but I am unable to transfer or share files to other computers running Windows Vista/7. After a bit of research I figured this is because the workgroup name of my office laptop is different than the systems at home. I dont want to change the workgroup name of my office laptop as it will create problems at work.
How can I connected my office laptop to the network and transfer files if the workgroup name is different? It does show names of computers on network but when I try to connect a username & password box pops up.
View 6 Replies
View Related
Mar 25, 2011
When somebody opens my computer in workgroup it should ask user id and password.I mean if they type \mycomputer in run command, it should ask user id and password.
View 1 Replies
View Related
Sep 29, 2011
I have networked three computer using lan through wired switch. I have one net setter with me. And i have connected it with my one computer.And now how can i get internet on others computers.
View 1 Replies
View Related
