I have networked three computer using lan through wired switch. I have one net setter with me. And i have connected it with my one computer.And now how can i get internet on others computers.
View 1 Replies
We have two different groups in network say 'A' and 'B'. My network is B. I can view the computers in my group simply by clicking "view workgroup computers". I wonder how I can view the computers in group 'A'
View 2 Replies View RelatedWhen somebody opens my computer in workgroup it should ask user id and password.I mean if they type \mycomputer in run command, it should ask user id and password.
View 1 Replies View Relatedi am unable to view all the computers in my work group by which sharing is also not working. whenever i tries to open shared folder in other computer this particular message appears ( no network provider accepted the given network path)
View 6 Replies View RelatedI understand we cannot view computers that in different workgroup though in the same network. But when I try to add printer it lists even those local printers that is attached and shared in different workgroup.
View 1 Replies View RelatedIve recently gotten four computers together on the same workgroup. They are all Windows 7 in some form or fashion, and I need them to be able to share the C:\Usersusername files so we can grab files from others desktops and work on data spread across multiple computers.
Ive tried using the homegroup function and Ive also tried just about everything and I cannot get them to access each others folders. No matter what I do it says I dont have the access privileges required to open folders on another computer. On a scale of 1 to 10 I would consider myself an 8 or 9 in being technologically savvy, and after an entire day working on it Im just unable to figure this out.
-All computers are on the same workgroup
-All computers can see each other on the network
-All computers have file sharing enabled
-Firewalls are completely off
-All computers run through the same router (though 2 go through a hub then the router, the other 2 go through another hub then router)
When I go to "advanced sharing settings" and try to give permission to a user on another computer the work group doesn't even appear. I can only give access to local users on each individual computer.
I am trying to get multiple PCs in a computer lab connected to the internet at the same time. There is an ethernet jack and right now the cord there is going into the linksys 8 port workgroub hub and then separate ethernet cords are wired from the hub out to each computer. But, this set up only allows the PC that is turned on first to connect to the internet. Am I using the hub wrong? Do I need another piece of equipment? The lab was set up like this when I arrived, but it is not working (I am thinking it did at some time).
View 3 Replies View RelatedI have a RV120W Firewall and I've created 3 Vlans. One for Internet Access Computers, One for non-Internet access, one for printers. How can I implement security to keep Internet and non-internet vlan computers from communicating with one anothers? Both computer vlans will need to communicate with printer
View 1 Replies View RelatedI have a modem connected to my pc, and the ethernet can be removed and connected to a laptop to access internet. How do I prevent access to other laptops and computers?
View 4 Replies View RelatedI cant seem to access a webpage. I have 2 computer hooked up to a router and the router to a cable modem. One computer works fine and the other all of the sudden stopped being able to access the web. It says I have a connection but internet explorer and firefox can pull anything up. On bottom right it says local area connection is connected but another one says local are connection4 network cable unplugged. all cables are fine and network adapter says its working properly
View 7 Replies View RelatedI was wondering if I plugged an ethernet cable from my laptop (which has wireless internet) into a nearby computer (which does not have internet) if they would share the internet? i did plug in the ethernet cable, and my computer acquires a network address but has limited or no connectivity
View 3 Replies View Relatedmy three computers cannot connect to the internet, they were fine last night now it says. cannot comunicate with primary sever, do you think it is my comp or sever.
View 3 Replies View RelatedFirst 3 days ago i came in to my work and my 2 Desktop computers where not connecting to the internet. After trouble shooting i found that my cell phone and wireless computer would connect. then hardwiring with my cat5 cable my laptop worked as well. i couldn't connect to the router as well from the 2 Desktop computers. restarted every thing router modem computers ext. nothing.Then i tried ping tests nothing could not ping each other or the router. though the network map clealy told me the ip addresses of each computer and that it was connecting. then as though from random i tried again to log in to the router. 192.168.2.1 and one of my computers found it and could then connect to the internet.
View 13 Replies View RelatedHow to connect my 5 computers to an internet. i already have a hub and lan connections but the other 4 computers still don't have internet connections.
View 1 Replies View RelatedI am having problem in configuring two computer in point to point to have internet connection on windows xp
View 2 Replies View Relatedi want to share my internet between two or more computers.is it possible with switch?
View 2 Replies View Relatedi want to share my internet connection in LAN. i have windows 7 in my system, and in my LAN PC having both XP-SP2 & Win7. I have a Teracom ADSL router (4Port) & D-link 8 Port Switch. i want to share my connection like this :
Router --->My Computer (Host)----> Then other computer in the LAN.
I just want to connect two computers over the internet as if they are in the same network. This doesnt have to be VPN I dont care about security I just want to get them connected as if they are on the same network. Is there anyway to set this up in my linksys router? Can I use windows VPN? What is the easiest way to get this accomplished? Can you somehow connect two routers through internet like one is 192.168.1.1 and one is 192.168.2.1?Like I said I dont really care how it is done I just need it done. Any easiest way to connect two computers through internet so that they are on the same network.
View 11 Replies View RelatedWhen I browse or surf the internet with my computer, it causes the router to stop working on all devices connected to it. This includes my laptops, iphone, ps3 and other desktop. However, if I or anyone else connected to the router had a stream running on youtube, a file that is downloading, a game running online or voicechat with ventrillo, nothing happens to those processes. I just can't start a new download, or open a new tab, or start anything that requires internet connection.I've tried using different browsers, I've tried updating my computer, using different ports both on my computer and the router, shutting off all my firewalls, factory resetting my router and nothing works.I've narrowed the problem down to an issue with my computer as this would never happen to any other or device. This problem ONLY happens when I surf the web or view/open websites.The only way I can fix the problem is by walking up to my router and restarting the router (the router only) and waiting a minute for my computer to reconnect.I've noticed that the router stops working when I go to sites or links that have on screen popups of flash or java. When I check my network connection after the internet stops working, the rate of packets received becomes dramatically reduced.
View 8 Replies View RelatedIve been having an issue for the past 3 weeks keeping my primary wired PC and the wireless PCs in my home network connected to the Internet. The internet constantly disconnects intermittently (with no rhyme or reason) and have tried everything I could do to try to resolve the issue. I connected my wired PC directly to the Optimum Online Cable Modem (Arris Telephony Modem v 3.0) I use to connect to the internet and it still has connection issues. Most of the time when it drops the connection, the network icon on the taskbar says I�m still connected to the internet. Only after a few minutes will the network icon finally appear with the yellow exclamation point over it. When I right click the network icon, I will check the network and sharing center and will click on the red x over the connection from my router to the internet. Sometimes when Windows checks for internet connection problems, it will state that it cant resolve the issue, and other times it will state that the DNS server isnt responding or cannot communicate with Primary DNS Server. I�ve had my ISP cable guys check my cable wire (coaxial cable wire) for packet loss, swapped my old router for anew one (twice), readjust the connection outside for a specific low node issue, and did 3 or 4 trace routes, conducted a multitude of ping tests, went on speedtest.com to check the signal strength and they state that everything looks great on their end. I also used different Ethernet ports built into the motherboard of my PC to see if my network adapter was the issue, but my internet connection it still continues to drop, even when only my pc is wired directly into the cable modem. I even changed the Ethernet cables themselves to see if they might have been faulty, but it still continues to drop.
I forgot to mention that I did the flushdns and registerdns commands , plus reset the TCP/IP, but my internet connection still continues to drop. The only thing(s) I have not done is change the network adapter completely (install a new Network PCI adapter ) and have the cable guy re install an entire new coaxial cable wire, of which myISP is adamant that I don�t need to have done since when I am able to connect to the internet, my signal strengths and speeds are great (download speeds of 32mbps and upload speeds of 5mbps). I know I�ve said a mouthful, but Im at a loss of what I should do next. When connected to my cable modem through my wireless N router, ALL of my PCs (my wired PC and my wirelessly connected PCs through my home network)will disconnect from the internet . Both the cable modem and the wireless N router still appear to be online (none of the lights on the front of the modem or router have changed ) I�ve even considered the strength of the ethernet cable itself, possibly thinking that the ones I have may not be strong enough for my internet speeds (purchased a CAT 6 Networking Ethernet Cable). My router , OS, cable modem, ISP, motherboard, and built in network adapter specs are shown below;
ISP: Optimum Online (with Boost Service) OS: Windows 7 Ultimate (with latest Windows 7 Service Pack 1 updates) Cable Modem : ARRIS Touchstone DOCSIS 3.0 E-MTA Telephony Modem TM802 Wireless Router: Netgear Rangemax Dual Band Wireless N Gigabit Router WNDR3700 Motherboard: ASUS Rampage Formula Built In Network Adapter: Dual Gigabit LAN (2 RJ45 Ports)
I will like to know that i have 3 computer in a router (tplink broadband router n-series) network which has internet access but i don't want to access internet in other 2 computer how can i do that?
View 1 Replies View RelatedMy computers and my modem were connected in a D-link hub. Only one computer have an internet. What will I do to make other computers share the internet?
View 4 Replies View RelatedHow to connect two computers using one modem so they both use the internet
View 2 Replies View RelatedI have a wireless OS X 10.7.1 Mac a Windows 7 laptop, also wireless and one Windows 7 desktop, also wireless but close enough to my wireless modem that it can be hard lined in. If I use the "bridging" option in the modem settings, which I assume requires I enter the Mac address all devices:1. do I need to include my network printer?2. can I still access the internet from all computers?3. if I can access the internet, do I need to do so with everything going thru one computer or can they all connect independently?
View 10 Replies View RelatedIf I do a factory reset on a router, does that mean the computers on the LAN will not be able to access the Internet?but then the router will configure it's self automatically to re-allow connection ?
View 2 Replies View RelatedI have 2 computers in 2 different countries. The current country of residence (France) has some Internet restrictions that I want to bypass, so I need to pass all my Internet traffic to my home computer.The home computer is on Windows XP and the connecting computer is on Windows 7 (I also have a Windows XP laptop so that's not a restriction).
I created a vlan (or vpn?) using Hamachi, to have a static IP on the home computer. So now I have a connection to my home computer. The next step would be to direct all trafic through this connection. How do I do that? I tried using the windows wizards: on the home computer (server) I created a new incoming connections thingy and on the client computer I created a VPN connection using the hamachi IP. I finally succeeded connecting the two, but nothing happens. Once I connect to the VPN, I lose Internet connection, and with it the Hamachi connection. I don't think the server passes along the client's internet...
My laptop is connected to USB modem for internet connection. I would like to connect another computer to same internet connection. So i used LAN cable to establish connection. it worked well for first time. But now it is not connecting. how to connect two computers to same internet connection?
View 2 Replies View RelatedI have internet connection of 256/128 kbps, when i connected it to a LAN it is disconnecting every 4 sec how many computer can be used to share that connection.
View 3 Replies View RelatedI want to connect my laptop with another one via remote connection. But I don't know how to connect. I'm having the team viewer software installed in my two laptops. How to get my PC's connected through remote assistance.
View 4 Replies View Relatedwe hadn't have the WEP key on our Linksys wireless router, so we decided, about a month ago, that it was a good idea to lock our wireless connection. So we did. For a couple of weeks, everything worked just fine.But then we bought a new printer, which happened to be a wireless network printer, and in the process of installing it, we mistook the reset button (I think) on the router for some other button and ended up resetting the router. When we did that, we undid WEP key, thereby unlocking the router. Then, we locked the router again, at which point one of our computers--which happens to be mine--ended up not working. All other computers and phones and iPads work just fine, but this one laptop of mine just doesn't work (with respect to wireless internet connections, of course).
- pressing the reset button on the router again. It kind of works. The internet works for about five or ten minutes (which is unbearably annoying because I have to reconnect it every five minutes), but my computer somehow disconnects itself from the internet connection. Also, although the internet technically "works," the wireless network icon thing on the bottom right of the screen has an "X" on it, which I thought meant the internet is not working, but it apparently doesn't, because my internet is working now. And, if I click the icon, it says that I'm not connected, but, again, the internet works. (for about 5~10 minutes, if I unlock the router)
- changing the internet protocol information (I don't think it does anything, but.)
- changing the wireless internet connection property to WPA, WPA-PSK... everything.
*All computers in the house have wireless internet connections but mine.
*When I reset the router, the internet works, although the computer says it isn't connected, and it disconnects itself every 5 or 10 minutes.
I was wondering if it is possible to share my internet connection to specific computers on my home network. Both my laptop and desktop computer is connected to the same Wi-Fi router (no internet connection). This network connection is mainly used for file sharing. I want to share the mobile internet connection on my laptop with my pc without giving the other computers on my network access to the internet connection and without disconnecting from the home Wi-Fi router. Is this possible and if so how
View 2 Replies View RelatedHow to block internet access some of the computers in a network
View 2 Replies View RelatedI have computers A-E in my house connected to the Bright house supplied neatgear cable modem. Computers C,D and E will connect via DHCP. computers A and B have dual NIC's. (10/100 nic A, 1000 nic B). Heres what i would like to do: connect all computers (A-E) to the internet. (this part i am currently doing) on computer A and B i want to create an ad hoc net work to souly use the 1000M nics (for data sharing). I want to separate computer A and B so they wont use the 100 Mbit connection.
View 1 Replies View Related
