Use Two Fully Configured Linksys Wireless Routers On One Network
Dec 15, 2011
I have a Linksys WRT54GL router in one building and a second router in an adjacent building. I have connected each router to a MODEM that takes me to the internet. Can I configure the two routers to talk to each other and at the same time maintaining their respective internet connections
View 4 Replies
ADVERTISEMENT
Mar 24, 2013
It's' my first router (E 2500) one desk top and two laptop and also a Ipad connected, every thing look fine exept for the Ipad.Lots of page not fully loading, I have to reload couples of time to get it full load. and lots of Youtube video said not presently availale but work fine with laptop or desktop.Did not change any seting on the router, I just plug it and used it
View 9 Replies
View Related
Mar 18, 2013
I have a Linksys Wireless G PCI adapter. The model is WMP54gs and the serial number MGP00E416793. I am trying to install this adapter on a Windows XP media center computer. The computer is update to date with all windows updates. I need the driver and software to successfully get this adapter to fully work.
View 3 Replies
View Related
Jan 21, 2012
i have tried many things i have tried to reset my router with the cmd prompt i have checked my drivers i have tried the simple things and at this point.
View 1 Replies
View Related
Apr 28, 2011
We moved to a different city and trying to access any available network but can't connect. Says no network found. I click diagnose and it says "This computer does not have a wireless network adapter installed and configured"
View 1 Replies
View Related
Jul 21, 2011
I am testing rogue on wire using 5508 WLC and , I have a dedicated AP configured as rogue detector and configured the switch port where the Rogue detector is connected as trunk. I have plugged in an autonomous AP with open authentication to the same switch so that it can act as a rogue. On the WLC, I can see that Autonomous AP as rogue on Wire. But along with that I am seeing another AP as rogue on wire, even though i have plugged in only one Autonomous AP to the switch.
View 3 Replies
View Related
Jul 3, 2012
We have received from a customer of us an WRT54GL box configured with a Coova software. This Wifi router was supposed to be a Wifi hotspot, but was not configured by us. This box is able, on startup, to get an IP by DHCP, to touch a remote Radius server, and so on (we "tcpdump" the Internet traffic, and we saw DNS requests, radius requests, ...)...
But, we are unable to connect to this box,by SSH or by HTTP, either by plug-in PC to the Internet RJ45 or the LAN RJ45. It has no IP as 192.168.1.1. Instead, it was configured to have 192.168.1.1 as gateway.
Of course, we have no doc on previous install, but only the admin/root password for SSH.We are afraid to lose the config (coova, ...) if we perform a hard reset.What is the best way for connecting on this box ?
View 1 Replies
View Related
Mar 24, 2012
I have a WRT54G2 with the most recent firmware upgrade (which brings issue one - there hasn't been a firmware upgrade released since mid 2009?) and am trying to connect to a VPN for work. The connection fails and I have gotten error messages indicating the issue is the router is not configured to allow GRE protocol.
View 1 Replies
View Related
Jul 25, 2011
i just bought a 5508 wireless controller that was delivered yesterday .I powered it on yesterday and was able to make basic configurations of management interface ,time and zone settings.I was also able to get to the GUi and console after the configs and it was alright. When I got in this morning it ran for about 2 hours and all of a sudden starts shutting down after every % minutes and comes back again.
View 7 Replies
View Related
Apr 29, 2013
I have a WCS v.7.0.230.0 and four controllers v.7.0.235.3 (on two WiSMs). I have a problem now where when adding/modifying guest users the controller list shows only three controllers. I don't know when this started happening or why but no matter what I do (including removing the controller and adding it again) I can't get the controller list to be fully populated with all four controllers. I've attached an image of what I'm seeing.Other functionality appears to be normal, for example I can add "mac filtering" addresses to all four controllers with no problem, APs can register to the affected WLC etc.
View 2 Replies
View Related
Jun 18, 2012
I just noticed that i have port 10080 open on my router (wrt160nv3). Port forwarding is not configured and web administrative access is only allowed through https (443). DDNS is also disabled, I was wondering why this port is open.
View 9 Replies
View Related
Jun 4, 2012
I call century link because my router was not connecting at the proper speed of 7 mbps. That problem was easily remedied over the phone but the lady said she could see several devices connected. This lost me a bit because I have a double router configuration. The Action tech PK5000 i turned into nothing more that an internet modem. I disabled the DHCP and configured my Linksys E1200 for all the internal DHCP so there is only one cable going to the PK5000. I should technically speaking look like one user on there network with natural protection from the second router.
View 5 Replies
View Related
Oct 16, 2012
I have a Cisco E4200 with a Thecus NAS behind it. I configured port forwarding on port 80, 1080 and 4433 to access the NAS. However it's not working. Also tried to place the NAS in DMZ, but also I cannot connect it from outside my network. Inside my network, there is no problem.I also connected the NAS directly to the internet, and then I can access it from outside my network.I already tried a factory reset, disabled UPnP and IPv6, but nothing seems to work. I also replaced the router with a Cisco E3200, but it makes no difference.
View 9 Replies
View Related
Mar 13, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP :
However, when I initially connect to the router, either on the LAN or remotely via the internet, the router takes a long time to display the initial page (up to 1 minute) and then usually displays the page without any variable data included. Frequently it also fails to show the menu on the left either. By hitting Refresh several times, eventually it will load the page fully.
View 2 Replies
View Related
Jun 15, 2011
what is the maximum number of Lan-to-Lan and user vpns supported in the ISR G2 2911 and 2921?
View 5 Replies
View Related
Mar 16, 2013
I configured a RV042 to load balance 2 WANs. It appears to working well but I would like a 2nd opinion as to whether or not I chose the proper settings to accomplish the task.
1. WAN1(ISP1) is the existing internet connection(1.5mb T1). I have a block of static IPs with ISP1.
2. I added ISP2 to the RV042's WAN2 connection to increase bandwith (10mb). I only have one static IP on ISP2.
3. I want everyone on this router to use WAN2... well... almost everyone... for the most part.
4. I want to keep WAN1 active on this router because there will be periodic inbound connections using static IPs (from ISP1) that are setup with one-to-one NAT. I also have a voicemail system that needs to continue to use ISP1's email relay (SMTP,25).
Anyway, I was able get the outgoing traffic that had to remain on WAN1 working with protocol binding. In order to get the router to use WAN2 for pretty much everything else, I set it for load balancing and set "Max. Bandwidth provided by ISP" for WAN1 up & down kbits/sec both to 32 (very low). I left the WAN2 up & down settings to the actual speed of WAN2.
The result is very low traffic on WAN1 and lots of traffic on WAN2 which is what I wanted. Did I do this right? Is there another preferred method to accomplish this.
View 2 Replies
View Related
Apr 3, 2013
I have a Cisco RV016 router, with some ports configured in "Setup --> UPnP". Currently I have problems to configure new ports. I can create the service in "Service Management", but when I add this service to the list, I press "Save" and the router close the session. I need to re-login the router, and it don't save the changes.
However, if I add a service that was already exists before having this problems, the router save the changes (But the router close the session too).
The router has the last version of firmware since the first run.
View 4 Replies
View Related
Jan 9, 2012
Set up wireless internet with this computer. After going through set up wizard my computer would not fully connect to wireless. It is connected to the network but the internet does not go through. When diagnosing the problem windows says "A problem with your network router or broadband modem might be preventing an internet connection. My husbands computer and phone have no problem connecting. My computer says the wireless network adapter is working properly and I seem to have no trouble connecting to other wireless connections.
View 4 Replies
View Related
Feb 16, 2013
There are 5 VLAN's and all can communicate through all the different subnets, but VLAN5 can not communicate to the RVS 4000.
VLAN Smart Port set to switch and router - this is not working What Smart Port configuration should be set up to talk to the LAN port on a RVS4000?
VPN is set up and connected, but when trying to connect to the client can not connect to remote networks.
View 1 Replies
View Related
Mar 6, 2012
We have a network based from a server where data is stored, such as Quickbooks files, and an employee has a laptop instead of a workspace. He needs to be able to access the Quickbooks file from his computer- we are currently using Remote Desktop Connection, however it is proving to be quite complicated for him and I need to know how to set it up. I know how to set up Quickbooks and all- the issue is with adding his laptop to the workgroup.
View 3 Replies
View Related
Jun 13, 2011
I purchased 2 Cisco WAP4410N and i configured them on the network as 192.168.1.241 and .242.I see both SSIDs i created and they are named Cabo1 and Cabo2.
When i initially did the setup I was able to log into the webbased interface through both ip addresses.
I just tried again now, and Im able to log into the interface for .242 but not the .241. I am connect to the router with .241 via wireless because it is with the SSID of Cabo1.
View 1 Replies
View Related
Aug 23, 2012
The host computer runs Windows XP (SP3), and the client - Windows 7 Ultimate. The host computer connects to the internet with a USB wireless modem (HSUPA USB modem by ZTE). So I enabled sharing and connected the two computers with an Ethernet cable, so the first time it worked. The next time I turned on the computers I wasn't able to share the internet, I wasn't able to load any pages on the client computer, however Skype was working. I tried to use various guides on how to input IP addresses manually etc, but that didn't work, finally I felt like I had changed so much that I decided to restore both machines to an earlier point and start over, that still didn't work.
Then I bought a Cross-over Ethernet cable, and the first time I connected the computers - the internet was working on the client computer, I reboot - only Skype works.When I try to diagnose the problem on Windows 7, it usually can't find anything (it says that I have access to the Internet, but in the "Details..." it says that IPV6 has no internet access), or once it said something about IP addresses but wasn't able to fix it, the other time it said that DHCP wasn't enabled on the client computer and it enabled it and the internet started working. Right now on the client computer in LAN "Details..." it says that DHCP is disabled, but the diagnostic tool doesn't detect anything.
What numbers I should blur, when I restored, on the XP (host) computer the antivirus broke down (avast, free), so I had to uninstall it with a special uninstaller through safe mode and install it again, so when I reinstalled the internet sharing was working again, so it made me think that it was avast's fault, however there's no firewall in my free version so in avast forum I was told that avast is not the problem.
View 5 Replies
View Related
Sep 4, 2012
I have 2 Linksys WRT54G laying around. Is it possible to connect from Cable Modem – D-Link wireless N router – 4 port switch – Linksys Wireless G router?The reason is that my office is in the back of the house and I have a network cable running from outside to the front of the house. The wireless N doesn’t give signal to the front of the house. I want to have wireless for the tablets and the android phones.
View 1 Replies
View Related
Mar 14, 2011
I configured a remote-access vpn on an ASA 5510 version 8.3. This is the configuration [code]The vpn goes up and I get an ip address, but it's impossible to reach the internal network. [code]
View 9 Replies
View Related
Apr 14, 2012
I currently have a Cisco 2621 powering a network at our co-location facility... It's a simple setup and is working well. The colo provides a redundant HSRP uplink, so I have their two uplinks going into a Dell switch. From that Dell switch I have a uplink into FastEthernet0/0 on the 2621, configured with my routing network, and then FastEthernet0/1 gets an address from my block of routable IP. FastEthernet0/1 then plugs into another Dell switch where I have all my servers connected. The servers get public routable IP addresses and use the address on FastEthernet0/1 as their default gateway.
It's time to upgrade off the 2621, so I aquired a Cisco 2811 which has two FE interfaces, as well as a modular HWIC-4ESW switch. My question is, can I get rid of the Dell Switch A in the setup above and just use the internal switch on the 2811 to accomplish the same thing? And I if I did this, would my two uplinks from the colo plug into ports 1 and 2 of that HWIC, and then port 3 would physically connect into FE 0/0? Or can I logically do that via configuration in the Cisco? I'm not sure how all this works and haven't received the new router yet, so I thought I'd get a head start and reach out to the experts.
My second question is unrelated, but each port on the HWIC switch cannot be configured as a network interface right? I'm pretty sure they can't as they aren't considered network interfaces but just thought I'd ask.
View 11 Replies
View Related
Nov 1, 2011
I have a 4507R that will be using track and sla for failover/failback on two WAN circuits going out of my switch. Is there a way to configure an email notification, or some other sort of notification to let me know which route is being used, especially when the failover kicks over to by backup route.
View 2 Replies
View Related
Oct 31, 2011
I have configured Clientless SSL VPN for access to ASA 5540 internal network. Still I am unable to take ssh to my core switc [code]
View 5 Replies
View Related
Jul 12, 2012
I have 2 wireless routers with me.
(Linksys WAG200G & USR 9111).
Now, I am using USR9111 as the primary router. But, it not enough to provide network for the whole area. So, I have planned to add another router to this wireless network.
View 6 Replies
View Related
Jul 12, 2012
I have 2 wireless routers with me. (Linksys WAG200G & USR 9111). Now, I am using USR9111 as the primary router. But, it not enough to provide network for the whole area. So, I have planned to add another router to this wireless network. Is it possible?
View 10 Replies
View Related
May 12, 2013
I am trying to setup to wireless routers onto one network. One router is the ES4500 the other is the Apple Time Capsule. The apartment I am in has thick walls and because of this, there are some wifi gaps. Trying to set the second router in a different room to act as a wireless bridge/access point for the first router.
View 2 Replies
View Related
Sep 16, 2011
I have just upgraded my old WAG54GS to WAG160N-E1 (Annex B). I've configured the PPPoE connection and everything was up and running... for about an hour. Then the router started dropping internet connection on pretty much regular basis (every 40-50min?) - it then takes 1-2 min until it reconnects again... Obviously that makes any online gaming a nightmare.
I'm now running again on the WAG54GS and everything is ok (except it doesn't support >6Mbps speed which is the reason I upgraded the router in the first place) so it's not an issue with the ADSL line.
View 1 Replies
View Related
Sep 18, 2011
I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.
View 1 Replies
View Related
Jun 18, 2011
I have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.
View 3 Replies
View Related