D-Link DIR-601 :: Don't Have Permission To Access
Jan 8, 2012
My router is a Dir-601 n150.Would the router possible be causing this problem? Some people say the router could possible be causing this problem.On my desktop I'm running, Windows Vista Home premium. On my laptop, I'm running Windows 7 Home premium. Both are set for Workgroup, file sharing is turned on, password protection is turned off.I have file sharing on both set to Guest. I have printer sharing turn on, which works fine.On both computers the only user is the Administrator, with this I set file sharing to Guest on both.When I use laptop to access files on my desktop, The public I can access with no problem. When I try to access the users folder I get an error message: Windows cannot access\ mane of computer-PC\Users/You do not have permission to access\ name of computer-PC Users. Contact your network administrator to request access.
View 3 Replies
ADVERTISEMENT
Feb 23, 2009
I am using LMS 3.1 on windows, and getting the error while logging, You don't have permission to access /cwhp/LiaisonServlet on this server.
View 8 Replies
View Related
Apr 14, 2013
All I want to do is to share a couple of Folders, My Documents and Downloads, between two PC's on a Workgroup network.Networking is not my strongest point but up until now I have managed quite successfully.The setup is :-
1st PC is Mike-Laptoppc is on a Wireless connection to an ADSL+2 router/modem.
2nd PC is a Desktop Alexs-PC connected via cable to the same router/modem
I can share all the shared folders from the Desktop to the Laptop, but I can only share Media streaming on the Desktop from the Laptop, so I know there is a connection between the two computers. I have now turned off Media streaming to concentrate on just folder sharing.Whenever I try to access the Laptop from the Desktop I get an " Access Denied you do not have permission contact your administrator " box on the desktop.
View 6 Replies
View Related
Mar 4, 2013
I am getting the following error mentioned below.
LMS 3.1 You don't have permission to access /cwhp/LiaisonServlet on this servlet
View 6 Replies
View Related
Aug 30, 2011
I installed a Linksys E1550 wireless router at home and I moved an external storage drive from the old computer (soon to be gone) to the router via the USB port in the router.
I can see the drive and files on the router on both the old computer and the new laptop, but I can't do anything with them. When I look at permissions for any given file it says: "Everyone" has read and execute only. "root" has Full Control, but I can't gain access to the "root" userid. I have gone through the router setup and folder/file properties using the "admin" userid and the router acknowledges that it is there, but it won't allow me to add permissions for the "admin" with "Full Control" to any of the items.
It won't even allow me to add new files, even though I have setup sharing for the entire partition.
View 4 Replies
View Related
Jan 12, 2011
ACE 4710 TACACS issues ,How to setup user with Admin context access permission. I have enable the TACACS and it can directly put me in Context mode not in Admin Context mode .
View 8 Replies
View Related
Sep 17, 2012
I have a network with aprox 150 workstations (90% windows XP profesional, 10% Windows7 32 or 64 bit), and I receive from time to time this message ONLY on windows XP workstations:" Workgroup is not accessible.You might not have permission to use this network resource" All the time I could access the various workgroup computers by entering their IP like \192.168.1.5 or \mikepc All the time i can ping any of the workstation without any problem.All the time using Search computers on the network I find computer name.
View 1 Replies
View Related
Apr 19, 2011
I want to share the My Documents folder from an XP machine with ONLY one user (the administrator) on a networked Win 7 machine. I have turned off simple sharing on the XP machine. I hate XP!! So complicated to do anything. Anyway, under security, I have tried share this folder, and not to share folder. I have gone into Advanced and messed around with permissions, taking out Everyone, using Admin only, using Network. At one point I ended up not being able to access My Documents on the local computer and had to jump through many hoops to change ownership and disable read only so that the user could use her own files!The problem is, under Advanced in the permissions area, I cannot see the users on the remote pc to choose which one should be allowed access. how to actually find a particular user on the Win 7 pc and give ONLY that user permission to read (not to change) the files in My Documents on the XP pc.
View 3 Replies
View Related
Jan 11, 2012
I have a folder in which there are many subfolders inside in windows server 2008 R2. I need to share it to the user pc's such that they should be able to see all the subfolders but wont be able to access the folders giving the message ''Access Denied" except for their corresponding dept. folders in which they can have read/write permissions.
View 3 Replies
View Related
May 12, 2011
Is there a way to restrict the helpdesk account only able to add/remove MAC address from the host filter table? It would be better if doing this via web or API.
View 1 Replies
View Related
Aug 4, 2011
I have the network up and running fine except that the Windows 7 computer cannot open any files on the xp computer. It says that it doesn't have permission and the check with the network administrator. There are no passwords set up on either computer and both run as administrator. The Windows 7 Computer is hard wired to a Linksys router, and the XP uses a wireless N adapter to connect. The windows 7 computer can navigate the xp computer, it just can't open any of the files with any program. From the XP computer I can access and open anything on the Windows 7 computer?
View 6 Replies
View Related
Aug 21, 2012
I am trying to setup a VPN with AnyConnect on my ASA5510 and it works fine. I have setup an AAA server group for my Active Directory with the "NT Domain" protocol". Right now, every user is able to connect with their Active Directory credentials. I would like to restrict access to the Anyconnect VPN to only a few users in AD.
View 1 Replies
View Related
Jul 19, 2012
I am in the process of updating the software on a Catalyst 3500 series switch. I deleted the old bin file and copied over the new file via xmodem.the image I used is:
c3500xl-c3h2s-mz.120-5.WC17.bin
Once the xmodem copy is complete I performed the following sequence of steps:
File "xmodem:c3500xl-c3h2s-mz.120-5.WC17.bin" successfully copied to "flash:c350
0xl-c3h2s-mz.120-5.WC17.bin"
switch: dir flash:
Directory of flash:/
[code]....
The last output is where I am stuck. What am I missing?
View 2 Replies
View Related
Aug 5, 2011
I recently purchased the E2500 cisco router. How does the MAC computer be able to log in as Guest user to access internet?
View 2 Replies
View Related
Mar 23, 2011
Any detailed knowledge about Cisco ACS 5.1 and Windows AD interaction? I wonder why does Cisco ACS domain account must have permission to create/delete domain objects. This fact does really surprided me, because to my mind Cisco ACS only reads domain structure, and does not make any changes.
View 3 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Oct 21, 2012
I have just moved into a new apartment that has a free wifi connection the problem is that my apartment is in the basement at the completly opposite side of the office and i cant get a strong enough signal to connect to the internet and im not very good with computers. the first time i tride setting up the repeater i was able to connect everything and get online but it had changed the ssid and when i tride to change it bacck to its origanil name i lost my internet connection and have not been able to get access the internet again.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Duron(tm) processor, x86 Family 6 Model 8 Stepping 1
Processor Count: 1
RAM: 479 Mb
Graphics Card: S3 Graphics ProSavageDDR (Microsoft Corporation), 32 Mb
Hard Drives: C: Total - 24385 MB, Free - 3678 MB; D: Total - 13776 MB, Free - 13649 MB;
Motherboard: , KM266-8235
Antivirus: None
View 3 Replies
View Related
Apr 22, 2013
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies
View Related
Jul 3, 2011
I have have my Dir-655 set up as an access point for awhile and would like to change the wireless access code. I can't seem to figure out how to access the setup menu while it is an access point to do this. How I access the router when it is set up as an access point?
View 4 Replies
View Related
Jan 2, 2013
Im trying to use my DIR 655 as an access point from my new router, which is a TP-Link TL-R860. I've read about every post and blog I can find about this and still cant get it to work. Currently I have a cable running from the TP main router to LAN port 1 on the 655. I then plugged my computer in to LAN port 2 to configure the router.
View 14 Replies
View Related
Aug 22, 2011
My problem is that after configuring my router's settings. I can't go to any websites other than the configuration page. I'm completely frustrated for days.icrosoft Windows XP [Version 5.1.2600]C) Copyright 1985-2001 Microsoft Corp.C:Documents and SettingsLe>ipconfig/all[CODE]
View 10 Replies
View Related
Oct 27, 2012
About 3 months ago i bought myself a D-Link 615 Router, thinking that i needed one for the time being,and when i was gonna go to college (wich is now) i'm still gonna need one.Worked like a charm for about a month.Then i left for college, and didn't need the router for like 4 weeks.Now i REALLY need the router and it doesn't work... The little globe light is orange instead of green,and it looks like it's connected to the wireless network, but i get a yellow ! and "No internet Acces" Message.Good so i go to the same store where i bought it from(only in a different city) and the guy there is really awesome and just gives me another one...on the spot..and takes mine...i was there,it was the exact same router from the shelf...the box was sealed...everything was sealed....imagine my happyness...Now i try to make it work,and guess what...same thing...same No internet Acces,and orange light instead of green.Why?
DETAILS:
Router: D-Link 615
Firmware: 8.02
H/W: H2
ISP: RCS&RDS (i'm from Europe/Romania)
Internet Connection: PPPoE (username/password)
Device: HP Laptop
The thing is that i'm at some relatives here, and now i need wireless for my laptop, and cable for my cousins PC.And right now not one is working.Problem: The internet Connection (or something like that...the little glove light) is green for a few seconds and then goes all orange on me....
View 14 Replies
View Related
Jun 18, 2012
I am using the DIR-615 (Revision D with firmware 4.13) as a secondary router (for using its WLAN) by having it connected to another DHCP router and having its DHCP and UPnP functions deactivated as instructed in the users manual.Everything is working as it should but ever since then, I cannot connect to the configuration site of the DIR-615 (192.168.0.1) anymore (request times out not matter if I connect via LAN or WLAN). So everytime I want to access it (for changing WLAN settings like changing channels as I frequently have to do) I have to reset the router to its default settings and install a 15 meter ethernet cable across the house.s the DIR-615 designed in this way? Is there no way I can access the DIR-615 configuration site after deactivating DHCP and UPnP?
View 1 Replies
View Related
Aug 18, 2011
The old router whit revision B2 was replaced under warranty with a new one which has the revision B5. The major problem: I can't access the router from WAN, even if I have the settings as shown below
View 2 Replies
View Related
Dec 22, 2011
I have an DIR-655 router firmware 2.00 Rev.B and from a few days i had some issues with the router.I have some problems with Wi-Fi and share-port and i want to make an upgrade.My wi-fi at some points disconnect me from the router.I mention that i cant access the router through 192.168.0.1 but wired i can.I've downloaded the firmware upgrade but it doesn't work.
View 3 Replies
View Related
Jul 7, 2010
Is there any way to log if a URL/website has been accessed? It seems that the "Access Control" section would do this, but I don't know how this works nor how to view the logs.
View 2 Replies
View Related
Jul 22, 2011
I run a web server behind a D-Link DIR-655 (Rev B). I have port 80 opened and forwarded to my servers IP and a domain pointed at my external IP. I can access the server without issue using the domain or external IP from outside of my network, but I can only access it via the internal IP from inside my network. Using the domain or the external IP just gives me a timeout error. I had a Linksys router previously and didn't face this issue.
View 3 Replies
View Related
Jun 12, 2011
I changed the router IP of 192.168.1.1 to 192.168.1.2, and disabled the DHCP. But I cannot access the DIR655 at the above new address by a browser. Note that the existing router's IP is 192.168.1.1 which the DIR655 is going to be cascaded with.
View 6 Replies
View Related
Mar 23, 2011
Using dir655 model for access point alone? I want to take the routing part out of this device since it is not needed at this point.
View 3 Replies
View Related
Mar 21, 2011
We have a dir-615 in our ong.We would like giving different permission to the users.I want that users can connect only to the ong network and other user may use internet.Today i don't know hou to do. I can block intretrnet access (with child control), but not for only selected user.
View 1 Replies
View Related
Mar 25, 2011
I recently bought a new DLink 615 E4 router.After a botched firmware update, I attempted to enter the emergency room.I got in once, and tried to upload the firmware using Internet Explorer 8, but it was stuck there for over two hours without any progress (stuck at the browse/upload page), so I disconnected it.
I haven't been able to enter the Emergency room since then. I get to the point where the power light blinks orange, and connecting my laptop to the router using the wired connection lights up the proper LAN light, but I cannot ping or access 192.168.0.1 anymore.
View 1 Replies
View Related
Jun 16, 2011
I ordered this router from walmart...My questions are before I even open it up when i receive it are..Will it be a huge pain to hook my vonage modem up and not have problems with calls?...I really got it also so that i can use a wifi device like nook to access their store...Also i was thinking of getting a roku player from netflix for my little 22 inch hdtv.
View 2 Replies
View Related
Feb 2, 2012
Currently have a sbs2003 with 2 nics want to install a wireless access point for the internal network. the wireless router is on the external wan how do i link the access point to this?
View 1 Replies
View Related
