Belkin Routers :: F5D8233-4v3 And Wide Open West Connection
Dec 5, 2012F5D8233-4 using wide open west, losing internet for a few seconds during use, wow says it's firmware but the router says it's up to date.
View 3 RepliesF5D8233-4 using wide open west, losing internet for a few seconds during use, wow says it's firmware but the router says it's up to date.
View 3 Repliestrying to download current firmware for my f5d8233-4v4 and i get this message, "No known program will open this file. This file is part of a program."
View 1 Replies View RelatedI see the switch to toggle the QOS on and off, but it is greyed out in on and will not allow me to switch. I would like to see if it solves the speed problem with my iPad. The newest firmware is installed in the router. I also tried changing other fields to see if it would unlock the quality of service field with no luck.
View 13 Replies View RelatedF5D8233-4v3 router. Internet is fine (wired connection) but I cannot connect wirelessly to any other device.
View 3 Replies View RelatedHow can I reset my N wireless router f5d8233-4v3? The reset button must have been pushed inside. I was setting it up as a repeater and then it keeps timing out.
View 1 Replies View RelatedF5D8233-4 N Wireless Router - Firmware Update,l I am trying to upgrade the firmware of this router which currently it's 3.01.29 to the latest one which is 4.00.04 but every time I try to manually install it, it comes back with an error message saying it's not the tight update but it is.
View 1 Replies View RelatedI have done a firmware update at my repeater F5D8233-4. But now I have no access to the webGUI of the repeater. The SSID can be found and I can access the network. But I cannot connect a 2nd repeater now. How can I reset the old firmware?
View 1 Replies View RelatedI am wondering how I log into the router and block particular IP addresses to include especially Facebook. I have a N Wireless Router F5D8233-4. Is there a way to figure out a site IP address if you open up there website.
View 3 Replies View RelatedI have new Belkin router and giving old one to my brother. It is F5D8233-4. Can I install without the CD "setup assistant"?
View 1 Replies View RelatedOn a F5D8233-4v3 I disabled the DHCP functionality and cannot connect to the modem's menu anymore. What can I do ?
View 4 Replies View RelatedI have a ADSL modem with a wi-fi router connected to the internet. I want to connect my Belkin F5D8233-4v3 to the router wirelessly and use it as an Access Point to extend the range of my home wi-fi setup. How do I configure the Belkin to connect to the adsl router over wi-fi without running the cable?
View 1 Replies View RelatedI have a Belkin F5D8233-4v3 N Wireless Router. To get the wireless Directv connection, directv told me I have to get 2 ports open on my router.1701 and LT2P.
View 1 Replies View RelatedI just updated my F5D8233-4 ver 3000 router with the latest firmware. Now only one of the hardwired ports works (#1) and it causes the router trouble enough sometimes to make it disconnect from the cable modem. All the wifi connections (5 of them) work well and do not appear to cause any trouble. What can I do?
View 1 Replies View RelatedI have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..
View 1 Replies View RelatedI'm currently using a Belkin F5D8233 wireless router and an HP DV6 laptop. My internet used to work just fine, but after I reinstalled my OS a couple of months ago I started having a funny problem. My internet will randomly stop working, I'll visit facebook, check a blog, and then i'll try to check my email and the page won't load. Then my internet won't work again until I reset my computer. The weirdest part is that Windows acts there's nothing the matter. The little icon in the notification bar still says it's connected and if I click repair, windows tells me there's nothing to repair. My wife has a different laptop and she's still able to access the internet fine after I've been kicked off. I've checked for a router firmware update and it's up to date. I bought a usb wireless-n adapter thinking my laptop's adapter might be bad and that didn't work. I considering buying a new router, but I'm not confident that will solve the problem since my wife's internet is still fine and because my internet works again when I reset, so it's not like the router is blocking my IP right?
View 3 Replies View RelatedOne of the laptops in my home connects to the wireless network provided by my brand new Belkin (N600 Dual Band) router with no difficulty at all - the other will not connect at all (it SAYS it is connected to the network, but it says that it is a 'Local Connection Only, and will not open any web browsers or allow you to get on to the internet) why is this happening and, more importantly.
View 1 Replies View RelatedI have a supplier which i need to connect a site to site ipsec vpn connection to (from a draytek router). I have already done this on our main site with no problems using the local ip details of 192.168.1.0 and subnet 255.255.255.0 however i need to do the same on our DR site which uses the ip details of 10.1.0.0 and subnet of 255.255.0.0. Our supplier told me the 255.255.0.0 is already used at there end by a different customer so we are unable to connect the vpn and communicate (in theroy we can connect but our supplier cannot reply). We can setup a connection to another spare server on a different address using a different subnet but effectivly this would mean that communication would stop at that server and communcation to the overall network or specific server the supplier needs access to (on the 10.1.0.0 255.255.0.0 network) is not possible. I was thinking maybe an internal vpn server to server connection through win server may do it, 2 nic cards or routes in the server routing table but this all seems a bit messy. Our network consits of win 2003 and 2008 R2 servers and is basic network with modem-vpnfirewall-switch and devices on the internal network connecting to the switch.
View 5 Replies View RelatedWindows cannot open this file (the update). what program opens the update? I just bought a SURF N300 v F7D6301 and am trying to install the update on the website, but I just get a box that says windows cannot open this file.. what program do i need to tell it to use to open the update?
View 1 Replies View RelatedI don't know if this because buggy firmware (i updated to V1.00.16) or there something wrong with the device but if i set radio band to AUTO which enable wide-channel, my wireless connection become unstable when i ping to the modem, i got 200ms - timeout randomly
my family notebook that on other side of room connection also become more worst , ping to the modem (192.168.1.1) timeout so often
the connections seems better if i set radio band to standard - 20Mhz channel even though it seems WAG54G2 have more stable wireless connection (i replace it because the ethernet port dead) i also tried to change the channel, but the issue still persist, it seems the default is the most stable (channel 9 for wide, 11 for standard)
should i RMA the product as i just purchase last week? or it just because the bad firmware ?
How to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies View RelatedThe Lg840g is a tracfone with wifi capability. I get strong wifi signal and connection at home, but receive failure to connect to requested host message when I open the browser. This phone works at wayport wifi, so I assume it's a compatibility problem with the router. Is there a fix? (Router works great with our Acer and Kindle tablets though.)
View 1 Replies View RelatedI'm wondering if it's possible to setup SSL VPN connection via OPEN VPN client?I'm a Mac OS 1.7 user with Tunnelblick.
I tried to use "built-in" SSL VPN Tunnel client but unfortunately it's not working - during installation Java exception appears saying that either I don't have admin privileges or there is not enough space.. Of course I'm admin and there is plenty of space...
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedHow do I configure my router to work with a dsl modem router model number is f7d7302
View 2 Replies View RelatedUsing a wireless connection, my PS3 struggles to hold the connection. It either times out trying to sign on to PSN or EA sports, or connects only to lose the connection shortly thereafter. My router is the AC1000 and I'm wondering if there is a specific setting that is required in the setup that I'm not aware of. My connections to all other devices are solid.
View 2 Replies View RelatedI reset the f5d9321 router and no connection with modem, power cycled the modem and router and still no connection with the modem. Pc and laptop can connect to internet by connecting to modem. The router worked fine 3 days earlier.
View 1 Replies View RelatedBelkin N300 - bought two weeks ago and have had very slow internet connection since.
View 1 Replies View RelatedI have a belkin N750 DB router. I recently upgraded by internet service from 15Mbp to 30Mbp. If I connect my computer directly to the cable modem, I get 30Mbp throughput. However, if I connect the modem to the router my speed drops to 15Mbp. How do I get the router to support 30Mbp?
View 2 Replies View RelatedWhy does my F5D5230 Router restrict my network connection speed ? I have a 30 mb connection to my cable modem when connected to my computer,but when I install the router my connection speed drops to 5mb.
View 1 Replies View RelatedF9K1103 v1 (01C) keeps loosing internet connection, the router is wired to a time warner modem and wireless is not enabled.
View 2 Replies View RelatedMy Router has been gone from running at bout 7Mb download speed to 500Kb download speed. When the router is restarted using the menu software it will run quicker, but only for 20-30 second then back to a slow speed. It was off while we were on holiday in August and has not been any good since. Its a shame as it only 2 years old.
View 2 Replies View RelatedHaving an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
View 9 Replies View RelatedI have wireless router F5D9230-4. I use this every day to connect to my employer's corporate network from my home, using a VPN connection via Cisco AnyConnect Mobility Client.
Just about every day my VPN connection is interrupted and, although it "thinks" it is connected, it loses connectivity to my company's corporate resources. This occurs even though I'm connected to my router using a Cat5 cable. While this VPN connection is lost, my Internet connection keeps working.
When I use the same computer, even wireless, connected through other networks outside of my home, the VPN connection is never lost (or at least never that I remember).
When I wire my computer directly to my cable modem, this problem does not occur and my VPN connection stays connected throughout the day.
Note that I reset my wireless router to all default settings other than the password to access its management utility, to avoid any "weird settings" coming into play.
I wonder if this has to do with "VPN Passthrough" or the windows 7 firewall conflicting with my router's firewall?
I've been working with the IT department at my job for weeks on this and a resolution doesn't seem to be coming from that direction. I'm on calls every day that use this VPN connection and it's to the point where these VPN connection losses are embarrassing to me.