Belkin Routers :: AC1000 Won't Hold Connection To PS3?
Oct 16, 2012
Using a wireless connection, my PS3 struggles to hold the connection. It either times out trying to sign on to PSN or EA sports, or connects only to lose the connection shortly thereafter. My router is the AC1000 and I'm wondering if there is a specific setting that is required in the setup that I'm not aware of. My connections to all other devices are solid.
I was trying for hours to connect the USB Hard Drive of 3TB (My Book WD 3TB) in the USB port A and B of the router then the router won't reconize. I Have another the same model but different capacity and work excellent (My Book WD 2TB). What I can I do in order to use my hard drive in my network?
I am using a Belkin AC1000 DB Wifi Dual-band AC+ Gigabit Router with the Belkin Router Monitor on a Macbook Pro (mid 2012) running OS X 10.8.2. I recently installed the router and the Belkin Router Monitor and everything works very well. I have one concern, however: the menu button on the finder bar is not illuminated blue, as it should be, but gray.
I'm running Windows 7 Home Premium, and using a ASUS USB-N13 Adapter to connect to my ASUS RT-N16 Router. I am able to connect to the network with no problems, however every 10-15 minutes I will be disconnected. I am almost positive the issue is with this computer or the adapter, because I have no wireless connectivity problems with my xbox.After being disconnected, there are 2 ways that I get the connection back. I either:1. Right click the windows wireless network icon (bottom right) and click troubleshoot problems. This seems to turn the adapter on and off during the automated troubleshooting and is then usually able to connect.2. In the ASUS software, I click "IP Renew" and this can sometimes fix the problem.Sometimes I am able to stay connected for hours, while other times it disconnects every few minutes. I have no idea what the problem is, and I know my way around computers pretty well but I am not well versed in networking.
I have a win 7 netbook that I recently got and for some reason it suddenly cannot keep a connection to the internet. It used to keep a connection before but now I keep getting the error the default gateway is not available about every ten minutes while connected which of course is very frustrating.
I've tried updating all associated drivers but apparently that hasn't changed anything. I've tried restarting the computer and tried different connections. I know its nothing to do with the internet connection I'm trying to connect to as other devices are able to keep a connection with no issue.
My wireless on my computer won't hold a connection for any longer than 30 minutes. I've checked the drivers, the wireless router, and scanned for viruses (several times) but nothing seems to work. In the last three months, I think I only had one occasion where the connection remained stable for longer than an hour. It doesn't matter what router I use or where I am. It has to be my computer.
I have a Compaq Presario CQ57 and I have had it for about 6 months.
My E3200 is having issues with keeping the speed up on wireless G. I'm about 20 feet away from the E3200 and there is 1 6in wall between me and the E3200. My connection will not hold 54Mbps, its constantly dropping to 36Mbps, even down to 5.5Mbps faily often. Around 30 feet away there i will lose internet connection yet my laptop says excellent connection to wireless.
I have 1841, 2800 and 3800 routers and need to do IOS upgrade to all of them. Existing routers do not have enough flash to hold 2 IOS images.if the router has 12.4.13r ROM IOS, will I be able to boot the ISR router via Cisco brand USB? That means in case something goes wrong while I am uploading new IOS to the router via WAN and something wrong, now router in ROMMON mode. If a local site person has a Cisco USB with an IOS in it, can he just stick it to the router and reboot the router and router will go out of rommon and go into normal mode? After it is working, then I can put the running IOS onto the exisitng CF card so now I can remove the USB and the CF card has a good IOS and reboot the router again.I am just trying to find a safe way to upgrade the site when they don't have big enough flash to hold 2 IOS at the same time. The local person is not technical so asking him to setup tftp server and put the IOS in the computer and so I can do tftpdnld while in rommon mode to grab the IOS from his tftp will be difficult to have the local person to set it up.
If ISR can boot off of the IOS in USB only, then I assume the requiremetn is the ROM IOS needs to be 12.4.13r. Then what is a safe way to upgrade the ROM IOS to this then? I never upgrade ROM IOS before so don't know what kind of problem I may run into and whether it's higher risk to upgrade this than upgrading the regular ios? If it is, then all my routers won't have this ROM IOS version, so that means I can't use USB to boot then? Will that means I am down to tftp server option? ( I heard xmodem won't work as it will time out before the ios can load via the slow dialup link into the router to rescue it from rommon mode).
Comcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
I reset the f5d9321 router and no connection with modem, power cycled the modem and router and still no connection with the modem. Pc and laptop can connect to internet by connecting to modem. The router worked fine 3 days earlier.
I have a belkin N750 DB router. I recently upgraded by internet service from 15Mbp to 30Mbp. If I connect my computer directly to the cable modem, I get 30Mbp throughput. However, if I connect the modem to the router my speed drops to 15Mbp. How do I get the router to support 30Mbp?
Why does my F5D5230 Router restrict my network connection speed ? I have a 30 mb connection to my cable modem when connected to my computer,but when I install the router my connection speed drops to 5mb.
My Router has been gone from running at bout 7Mb download speed to 500Kb download speed. When the router is restarted using the menu software it will run quicker, but only for 20-30 second then back to a slow speed. It was off while we were on holiday in August and has not been any good since. Its a shame as it only 2 years old.
Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
I have wireless router F5D9230-4. I use this every day to connect to my employer's corporate network from my home, using a VPN connection via Cisco AnyConnect Mobility Client.
Just about every day my VPN connection is interrupted and, although it "thinks" it is connected, it loses connectivity to my company's corporate resources. This occurs even though I'm connected to my router using a Cat5 cable. While this VPN connection is lost, my Internet connection keeps working.
When I use the same computer, even wireless, connected through other networks outside of my home, the VPN connection is never lost (or at least never that I remember).
When I wire my computer directly to my cable modem, this problem does not occur and my VPN connection stays connected throughout the day.
Note that I reset my wireless router to all default settings other than the password to access its management utility, to avoid any "weird settings" coming into play.
I wonder if this has to do with "VPN Passthrough" or the windows 7 firewall conflicting with my router's firewall?
I've been working with the IT department at my job for weeks on this and a resolution doesn't seem to be coming from that direction. I'm on calls every day that use this VPN connection and it's to the point where these VPN connection losses are embarrassing to me.
I have a DROID X2 and a HTC DROID Incredible can I use wireless wi-fi connections directly through my BN450D router or do I have to go through my computer to hook up..
I have xfinity internet with a comcast rented modem connected to a personally owned belkin router. I can successfully connect to the internet directly from the modem or if I connect to the modem to the router and then to my computer via ethernet cable. I cannot for the life of me connect wirelessly with any devices. The router previously worked when it was hooked up to comcast internet, but it was moden->router->my router. When I connect wirelessly on my Windows 7 laptop, it says I connect and that there is internet access. But when I try to load a page it takes me direclty to this website: url.. Comcast says that it is my router that needs configuring properly with xfinity and wants to charge me $39 to provide this wonderful service.
Router: Belkin Model F6D4230-4 v1 with firmware F6D4230-4_WW_1.00.03
I have F9K1112 router(#1) connected to my Mototola SB6120-Modem. I connected a F7D6301 V3 router(#2) to router #1 To extend the network. But it does not work. What settings do i need to set on router number 2 for it to provide me extended service?
I have an N300 router, and I'm having some connection issues. At least once a day I randomly lose connection. This is frustrating because I like to watch videos online and play games online, and randomly disconnecting right in the middle of a game with other people is not fun.
N600DB - Currently configured with primary computer hardwired to router, 1 laptop via WiFi, a Network booster used by iPhone/iPads and every time I wake the primary computer I get the Router Monitor alert that my internet connection has failed. By the way, I am currently using the primary computer to post this and the Belkin Router Monitor still says my "internet connection has failed" and An Internet connection cannot be established at this time. Re-booting your router may solve this problem, but you will temporarily lose your connection during the reboot.
FSD 7632-4 Router.Have this 2006 router which has started dropping the connection and/or slowing it down intermittently. Before I replace it, would like to update the firmware. Have downloaded the update but cannot log-in on the setup utility page as I cannot remeber my password (apparently it is not set to blank!).
I have a Belkin N600 model # F9K1102v1 i am loosing connection on all of the components connected to it wired or wireless. They all loose connection at the same time. I also noticed the clock in the router does not set to the correct time it is reading 1970 for the year and never changes.
I am trying to use f5d7230-4 v6000 to connect my TV and Playstation to my home WLAN, but cannot set up the router to receive the signal from the base station (FRITZ!Box). Is it possible at all to use f5d7230-4 v6000 for such function?
Belkin N750 Router - wired connection can not access Internet. I've tried direct to modem and have no problem, have tried old router, no problem, but if I shut down desktop completely (Win7) and restart, I get no connection. Uninstalling the NIC (Intel 82579V Giga) and restarting, then I get connection again. However, if I start in safe mode with networking, I have no problems at all. I've disabled my firewall to no avail.
I am running winsxp prodessional.I have a belkin N600 DB Wireless N+ Router and it is hooked up to a vmax 480 security syestem . this system allows me to see the cameras remotely on my ipad, i iphone amd laptop .
my problem is this the router shuts down and restarts( it must be programmed to do this ) and i lose the remote connection to the cameras. if i am home i can unplug the vmax and it will restart and find the router etc however when i am traveling i can not do this.
I have recently purchased a Belkin n300 wireless N router. The problem is, I have to reboot the thing numerous times throughout the day to allow a client to connect to it via wireless. One client will be connected and then drop, or a client will be connected, and I cannot connect another device. I also had an issue with streaming over wireless for netflix on my devices and the only way I could get it to work was to turn off the firewall, what the hek.... This is crap. I knew I should not have bought a belkin router again. Had one years ago and it constantly gave me issues. Had my Linksys Wrt54G for years with no problems until it finally crapped out. Anyways, my firmware version is the latest version according o the website.