ASUS USB-N13 Cannot Hold A Connection?
Nov 25, 2012
I'm running Windows 7 Home Premium, and using a ASUS USB-N13 Adapter to connect to my ASUS RT-N16 Router. I am able to connect to the network with no problems, however every 10-15 minutes I will be disconnected. I am almost positive the issue is with this computer or the adapter, because I have no wireless connectivity problems with my xbox.After being disconnected, there are 2 ways that I get the connection back. I either:1. Right click the windows wireless network icon (bottom right) and click troubleshoot problems. This seems to turn the adapter on and off during the automated troubleshooting and is then usually able to connect.2. In the ASUS software, I click "IP Renew" and this can sometimes fix the problem.Sometimes I am able to stay connected for hours, while other times it disconnects every few minutes. I have no idea what the problem is, and I know my way around computers pretty well but I am not well versed in networking.
View 1 Replies
ADVERTISEMENT
Jul 17, 2012
I have an ASUS Z77 Motherboard and when I install the AI Suite II which comes on the installation disc it blocks my internet connection. When I uninstall the software my connection is fine. I am using an Ethernet connection by the way. I think it is being blocked by the component called Network iControl. As soon as that component is uninstalled my Internet connection comes back. I want to have the software, but I also want to have my connection.
View 1 Replies
View Related
Oct 16, 2012
Using a wireless connection, my PS3 struggles to hold the connection. It either times out trying to sign on to PSN or EA sports, or connects only to lose the connection shortly thereafter. My router is the AC1000 and I'm wondering if there is a specific setting that is required in the setup that I'm not aware of. My connections to all other devices are solid.
View 2 Replies
View Related
Jan 25, 2012
I have a win 7 netbook that I recently got and for some reason it suddenly cannot keep a connection to the internet. It used to keep a connection before but now I keep getting the error the default gateway is not available about every ten minutes while connected which of course is very frustrating.
I've tried updating all associated drivers but apparently that hasn't changed anything. I've tried restarting the computer and tried different connections. I know its nothing to do with the internet connection I'm trying to connect to as other devices are able to keep a connection with no issue.
View 1 Replies
View Related
Feb 6, 2012
My wireless on my computer won't hold a connection for any longer than 30 minutes. I've checked the drivers, the wireless router, and scanned for viruses (several times) but nothing seems to work. In the last three months, I think I only had one occasion where the connection remained stable for longer than an hour. It doesn't matter what router I use or where I am. It has to be my computer.
I have a Compaq Presario CQ57 and I have had it for about 6 months.
View 1 Replies
View Related
Dec 26, 2011
My E3200 is having issues with keeping the speed up on wireless G. I'm about 20 feet away from the E3200 and there is 1 6in wall between me and the E3200. My connection will not hold 54Mbps, its constantly dropping to 36Mbps, even down to 5.5Mbps faily often. Around 30 feet away there i will lose internet connection yet my laptop says excellent connection to wireless.
View 2 Replies
View Related
Aug 9, 2011
Comcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
View 1 Replies
View Related
Jan 3, 2011
I am having the excact same problem, but I have an Asus F3l, which is only a couple of years old - shouldnt the drivers be valid - ie, hasnt WPA been around for some time?
View 14 Replies
View Related
Sep 20, 2012
Readers Digest Version: Worked fine yesterday nothing has change in my connection settings, router settings or server settings. (Computer is located at work in an AD setup, I am first level IT Support here) Router shows as it is getting a connection from the network card which is a Realtek PCIe GBE Family Controller with latest drivers right from realtek (and asus version tried too). But is not connecting at 10/100 or 1000. (Have two connection sources to test to).
What I have tried:
- Tried it on a 10/100 router and a gigabyte switch
- Multiple cat5's
- Performing a clean uninstall of the driver and reinstall both from the Asus and Realtek websites of both drivers.
- Disabling the lan rebooting, enabling he lan and trying to connect.
- Disabling power save multiple times.
- Checking bios for any lan options (which there was surprisingly very little options)
- Latest bios firmware
- Tried changing the duplex to 10/100 for the hell of it!
May try:- Reinstalling windows. I had this problem a couple weeks ago, I went into the bios and enabled PXE boot when into windows and it was suddenly working as usual again. Went back to bios disabled PXE and it was still working fine. I did it again today to no avail....
View 10 Replies
View Related
Mar 3, 2011
I'm trying to connect our ASUS VIJ series laptop to a dlink DIR-615 wireless router. The router connection page asks us to: "Please enter the PIN from your wireless device and click the below "Connect" button". How to find the PIN number for the laptop? The laptop uses a wireless g connection. The laptop can find the dlink router's signal on the wireless profiles & has been connected wirelessly in the past to a router (a plug & play type) without a problem.
View 7 Replies
View Related
Dec 2, 2011
I am getting a slow connection on the router ever since I got it. I get speeds of 5 to 3Mbps when I should be geting 19-20Mbps. I have searched everywhere but still no answer I am running the build 16994. I have done a hard reset, reboot the router and disabled the firewall, even change builds but still the same issue. I know is not the router cause it's Brand New.
View 1 Replies
View Related
Dec 23, 2012
I don't have any internet connection and i don't know what i must to do!!but my other computers have internet connection but this one.
View 2 Replies
View Related
Sep 1, 2012
My daughter has an asus x5dc laptop with windows 7 which was working fine but then stopped picking up our broadband connection. I have tried restarting laptop and making the connection but get message saying No connections available. I have another laptop using the same NETGEAR DG834GT wireless router perfectly well.
View 3 Replies
View Related
Aug 1, 2012
I recently built a new PC with an "ASUS PCE-N10" PCIE network adapter. I installed the drivers and everything was secure and nice and fast.
I moved the PC into another room this morning and everything was fine for most of the day. It's stopped working properly though now for some reason.
The connection is much slower and the speed keeps yo yoing and then cutting out. The signal is slightly lower due to positioning but it's still high enough. When it disconnects I use Windows troubleshooter to fix the problem and it says "Wireless Network Connection" doesn't have a valid IP configuration". It usually reconnects me then, but is still slower than it should be and it doesn't last for long.
I've tried connecting to a chosen IP but it just doesn't work. Other computers on the network are fine. Why now? What's happened?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Joe-PC
Primary Dns Suffix . . . . . . . :
[Code]......
View 15 Replies
View Related
Jan 26, 2013
I changed my ISP (I don't know if that has anything to do with it).I have my network setup so I have a seperate modem (tp-link td-8616), which is connected to my router (asus wl-520gu) and do most of my computing from my computer (running Windows 7 64 Bit Home Premium, wired network). I had installed tomato firmware onto my router, which was working fine with my first ISP. I changed companies about a week ago, and noticed my connection kept being dropped. At first, I thought it was an issue with my ISP, so I called them up, and didn't find a solution. Afterwards, I started doing some trouble shooting on my own, and noticed my modem was still connected (via the WAN LED, at least), even though my router disagreed.
So, I tried connecting directly to my modem and my connection would be fine without any issue at all, so I thought I'd trouble shoot the router. I switched back to the factory asus firmware, connected it back to my modem, and after a while, it disconnected my LAN connection again. My router comes with this somewhat annoying interface that tells me the issue is "You have set the wrong dynamic or static IP address for your wl-520gu." So, I investigate that, and here is the setup:My modem is statically 192.168.1.1 when I directly connect to it, so I left that setting alone.
My router is also 192.168.1.1, but this was how tomato worked, so I'm not sure that this is the conflict, so I tried setting it to 192.168.1.2, which does not seem to fix the problem.My DHCP settings are set so connecting computers are 192.168.1.100-254, which should avoid the conflicts.After about 5 seconds of connectivity with that setup (modem=192.168.1.1, router=192.168.1.2), windows reports that I don't have a connection. After using Windows' trouble shooter, it says "Troubleshooting couldn't identifiy the problem"Even with the connection problems, I'm still able to access the router web setup interface.
View 1 Replies
View Related
Oct 5, 2012
I recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
View 2 Replies
View Related
Apr 22, 2012
Running an asus WL-520gu router with flashed with DD-WRT. Just got a new DSL modem and now I can connect to the router, but have no internet connection. I've tried turning everything off, deleting network profiles and here is my ipconfig info below. Also i've pinged yahoo and it says "'DNS request time out was 2 seconds". I've tried resetting the router many times, but still nothing.[CODE]
View 3 Replies
View Related
Feb 15, 2012
I have an ASUS X58C laptop which has been working OK to the internet via the ethernet cable but it has stopped working.I used the laptop via the wireless connection to access the internet while away from home and on my return I can not connect via the ethernet but I can connect OK via wireless. The results with the wireless enabled are :
C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
I can see that the ethernet adapter(s) are shown as media disconnected but I don't understand how to make them connected. I also don't understand why there are two ethernet adapters or what the Tunnel Adapters are.Before I did the ipconfig command I went into Control Panel/Device Manager/Network Adapters/SiS Ethernet Controller, right clicked and selected the Update Driver Software which searched the internet for a driver and installed it.
View 7 Replies
View Related
Dec 22, 2012
My internet service provider is Optimum Online which is cable. I'm using the Motorola SBV5120 Modem that Optimum supplied, with the Asus RT-N66R Router. I had been using the Netgear WNR2000 until today, and I was fed up with the disconnecting issues.
Although I got the new router, the disconnecting issue is still there. I have a PS3 and a PC connected via Ethernet, and 2 MacBooks, 2 iPads and 4 smartphones connected via wireless, when all of the family members are home. I get disconnected from both wireless and wired when I do have this problem.
Is the number of devices attached to the router a problem? My internet doesn't just slow down, the connection gets lost.
View 1 Replies
View Related
Feb 8, 2013
I have a PC with a Realtek onboard Ethernet controller, running Windows XP. It's connected to an Asus RT-n16 router loaded with TomatoUSB, via a Cat5e cable. When I set it up a month or two ago, I confirmed that I was getting a Gigabit connection to it--the little network connection icon in the Windows XP taskbar indicated "1.0 Gbps." All well and good. I just happened to check it today, and it now says "100Mbps." Nothing, as far as I know, has changed to the configuration. I went into the Device Manager, and saw that under the driver settings, in "Speed", it was set to "Auto-Negotiate." When I tried setting that to "1.0 Gbps" instead, the network connection icon in XP's taskbar once again indicated "1.0Gbps." As an experiment, I then changed it back to Auto-Negotiate, and once again the taskbar icon read "100Mbps."So I guess I have two questions. 1) Should I leave the driver setting on 1Gbps rather than Auto-Negotiate? (2) Why might the speed have switched from 1Gbps to 100Mbps over the past month if nothing's changed?
View 7 Replies
View Related
May 26, 2012
I'm running an Asus G74sx, and it keeps losing connection to the internet (e.g. Youtube videos stop loading, disconnecting from online games constantly, my voice fizzing and breaking on VOIP programs like TeamSpeak 3 or Skype, etc). While the laptop clearly loses connection to the internet, it doesn't loses connections to the router (The signal strength remains excellent) and I've also tried using the cable, which doesn't fix the problem. The other computers using the same router work fine, though. These problems started about a week ago and I can't perform a system restore as the restore point available is from 05/26 (Yesterday). While I'm not an expert in the area, I've looked on several forums to see if there was a possible solution and done the following to try and solve the problem (none of which worked):
1- Restarting computer
2- Restarting router and modem
3- Opening the cmd and typing "ipconfig /release" and "ipconfig /renew"
4- Using a cable connection instead of wireless
5- Updating my wireless driver (Intel(R) Centrino(R) Wireless-N 6150)
6- Unchecking the "Allow computer to turn off this device to save power" on the driver configurations
View 16 Replies
View Related
Jul 25, 2011
windows was unable to connect dlink (router) is message i receive on my laptop after setting my son's nintendo 3ds to the wifi connection. internet connection is otherwise fine on other devices in home.
View 1 Replies
View Related
Jan 31, 2011
i use an asus k50c laptop which i connect to internet through a lan cable.i used to send ad-hoc connection to my other laptop for internet connection which was running fine until i upgraded my sys to the win7.the connection is no longer through and whenever it is the web browsers cant open any page.i ve tried everything i can.it shows that the there is connection but its not working.
View 19 Replies
View Related
Apr 10, 2012
My computer has lost its wireless connection. where can I download the driver?
View 1 Replies
View Related
Nov 30, 2011
my laptop when I'm on any web browser (Chrome, IE, Firefox, etc.) it will say I'm not connected to the internet and stay that way for a minute. Any downloads and stuff I have going still download though and it shos that I am still connected to the internet with excellent strength. This happens with both wireless and Ethernet connection. The only way I can fix it is by disconnecting form the internet and connecting again, even that though only works for like 20 seconds and then it says I'm disconnected again and I have to disconnect and reconnect again.
I don't think its internet connection point either because all my friends and school laptops and desktops have no problems connecting and don't disconnect.
My laptop is an ASUS Notebook G72GX
View 3 Replies
View Related
May 6, 2013
Installed Cisco AnyConnect Secure Mobile Client on a new Asus CM6870, downgraded to Windows 7 Pro. It worked fine for 3 days, establishing VPN connections with my workplace without a probllem. Then it repeatedly failed to connect.
I attempted an uninstall/re-install, and the install now fails as well, returning the following error: The VPN client agent was unable to create the interprocess communication depot. When I do manage to get it re-installled, it works sometimes, then fails to establish connections other times. I am not an IT professional, so trying to diagnose the issue by reviewing the Windows/Inf/setupapi.app.log and .dev files is a no go. I do not hold a contract with Cisco so I am not authorized to open a support ticket, or receive phone support (again, I tired).
View 0 Replies
View Related
Dec 8, 2012
Had my DIR 615 rev A just fail one day spontaneously; managed to bring it back by reflashing from the emergency room, but now it will not hold setting through a power cycle, other than this it seems to be working well.
View 9 Replies
View Related
Apr 26, 2013
We have a non-cisco device peering with Cisco 6500 for bgp. The routing table is fully populated and connection is good.But after some time we see bgp hold timer error on the non-cisco device. This device by default has a hold timer of 90 seconds which is different from default cisco hold timer. Will this cause any disruptions to the network? If we change the hold timer on one device to match on both sides, will it reset the bgp session?
View 10 Replies
View Related
Sep 25, 2011
Recently I bought a ASUS G Series G53SW-XN1 to replace my old laptop and it uses a Atheros AR9002WB-1NG wireless network adapter to connect to my network. On my older laptop I can get the full download speeds on my network of 500-600 kbs, but on my asus I can only acheive between 70-120 kbs. There should be little to no interference between me and my router and it sits only about 15 ft behind me.
My router is an old linksys wireless router which only transmits a B signal. I know wireless B is considered slow but it works perfectly fine for what I use it for and it works on my other laptop.
View 4 Replies
View Related
Jan 26, 2012
The computer has a strange habit of dropping my internet connection after it's been turned on for a while. I've already checked to make sure that the setting which allows windows to turn the wireless adapter off to save power is disabled, and I've set my laptop up to use a static IP address which no other device should be using. I'm connecting via wifi.The only way I know to fix the problem is to restart the computer whenever the problem presents itself.I have a motorola surfboard modem and a linksys e1000 router.The computer always says that I am connected and that I have full signal, but it displays an exclamation point over the internet icon saying 'no network access'
View 4 Replies
View Related
Aug 18, 2011
one last try before boxing up my new DIR-655 and taking it back to Microcenter. I've opened a case via email and got the standard response, below.I have a Dlink DP-300U print server that works fine with my 'old' Belkin router, a F5D-7230-4 wireless unit. Nothing wrong with the Belkin, I'm just getting some service drops from my lousy AT&T ifitl 1.5mbps ISP and thought a new router might work. I actually read the manual (!!) before installing the DIR-655 and even followed it. The print server just isn't visible on the network. Everything else is, though. The 'suggestions' from Dlink tech support below are very useful. If I could 'see' the print server to verify its IP address, we wouldn't be having this conversation. I've rebooted everything, several times and even reinstalled my old Belkin router (which always sees the print server.) And Dlink, no...I'm not interested in paying you $32.95 for up to a half hour to maybe fix a problem caused by your new device. And dropping my call after almost 15 minutes on hold is not cool, either. With reference to the issue you are facing, we suggest you to kindly ensure that the IP address assigned to DP-300U print server is in the same network range as that of your DIR-655.
NOTE: The default IP address of DIR-655 is 192.168.0.1 Once it is done, try to ping the IP address of DP-300U using any of the wired / wireless client connected to DIR-655.note the DP-300U is not currently supported in North America. D-Link offers a premium fee based support line that will be able to support any issues you have with this product.
View 6 Replies
View Related
Apr 21, 2013
I am trying to figure out how this works. I have an ISP device that connects to my 1841. ISP and fa0/0 hold the /30 WAN addresses. Fa0/1 hold one of the public IPs, lets say 1.1.1.1/29. Then the outside interface of the ASA holds 1.1.1.2/29. Now I have two routes in the 1841, one for default route going back to the ISP device, and a route for the 1.1.1.0/29 network going to the ASA.Now I have 4 more publics I can use 1.1.1.3 - 6. I do not want to assign these IPs to the servers, but yet just NAT them. I know this is possible, but cant figureI took an internal host and did a one to one static NAT from private to public. Packet tracer says my NAT rules are ok. Allowed all IP traffic for testing and still can't ping the server.
View 3 Replies
View Related
May 14, 2013
How can I hold the public IP on my cisco client VPN NAT session so nobody else can use it? I have a cisco asas 5510 inside is 172.10.20.86 public 166.245.192.90
View 1 Replies
View Related
