Can't Get Ping Of Client Ip
Oct 12, 2011i can't get my ping of client ip.
View 1 Replies
ADVERTISEMENT
Client Can't Ping To Server?
May 7, 2012I insert data from two clients.(1 window server 2003,2 XP clients ) the two client print paper and the printer is shared printer. At the same time two clients print paper and the printer stop working. So I restart my two clients and server. After restart the clients cannot ping to server.
View 1 Replies View RelatedDHCP Server Cannot Ping Client
Aug 23, 2011A Windows Server 2008 r2 with 2 internet ports. One (IP: 10.0.96.132) connected to company intranet and one (192.168.10.1) as DHCP server connect to several PCs (192.168.10.**) through a switch.The problem is the PCs (192.168.10.**) can ping the DHCP server (192.168.10.1) , while DHCP server (192.168.10.1) can not ping (192.168.10.**).How to configure the server so that all these PCs can access the intranet?
View 4 Replies View RelatedCisco VPN :: Can't Ping Anything From Client - ASA 5510
Nov 15, 2011I have a VPN client running on a laptop connected a DSL circuit. The VPN client is configured correctly for an external address on another firewall, this external firewall passes through ISAKMP / IPSEC to an ASA where it terminates. The client authenticates and gets an address from the client pool (VPNCLIENTS – 10.2.16.x / 24) and the tunnel completes with no problems. From the internal ASA I can ping any internal network behind the 10.0.3.240 interface (INSIDE) and I have a route on the inside network to get to the 10.2.16/0 clients to point to this address (10.0.3.240). All good so far.
Now the problems begin. I cant ping anything from the VPN clients (10.2.16.0) network to anywhere, I cant ping any interface on the ASA or any internal network. I also cant ping the client from the ASA and therefore not from the internal network either. This configuration is bare bones configuration so I don’t even have the NAT exception rules added. Network diagram attached too.
interface Ethernet0/0
nameif outside
security-level 0
[Code]......
Servers :: Ping Server But Cannot Browse On Client?
Mar 16, 2011two of my workstation can not receive ip address from the server but can ping server. So i can not browse with them
View 3 Replies View RelatedCisco WAN :: Can Ping From 7200 But Cannot From Client Machines
Aug 28, 2012I am having a weird issue with my Cisco 7200 router. From the router i am able to ping and reach out to the internet but from the client i am able to reach out to the internet but unable to ping I am not sure where is the issue but when i traceroute to it my packets are dropped at my routers interface. All my pings from the client time out. I checked the Access list to make sure ICMP is not blocked. Following is my running conf
ip audit notify log
ip audit po max-events 100
ip ssh break-string ~
ipv6 unicast-routing
no ftp-server write-enable
[code]....
Cisco Firewall :: Can't Ping Internal Client From Pix 515
Mar 28, 2012I just setup my home network with Pix 515 acting as my router/firewall but I can't seem to ping my internal PC from my ASA. I can access the internet and ping my Pix 515 inside interface from my pc but I can't ping my pc from my Pix 515. I can also renew/release IP's from my PC. I also did a packet tracer and it says that it was dropped due to an access list but I have one in place. Also my switch has the default config. Below is my config
Internet <----> Comcast modem <-----> Pix 515 <-------> Cisco switch <-----> PC
MYFIREWALL# sh run
: Saved
[Code].....
Cisco VPN :: ASA 5510 - Client Can Connect But Can't Ping
May 27, 2013I have an ASA 5510 with the configuration below. I have configure the ASA as remote access vpn server with cisco vpn client, my problem now is I can connect but I can't ping.
Config
ciscoasa# sh run
: Saved
[Code].....
Using LAN Connection Can't Ping Client On Windows Server 2003
Nov 20, 2011Why i can't ping client to server using LAN connection. but i can ping server to client. i use windows server 2003 as a server.
View 1 Replies View RelatedCisco VPN :: 1921 / EasyVPN Client Gets Assigned IP But Cannot Ping Anything Else
Aug 28, 2011(Router is ISR 1921)This is doing my head in. I am not using NAT, there are no ACLs, there is no split horizon.Here is what I have. It is practically generated by CCP. When connected I cannot ping the loopback interface or the gig0/0 interface, (not to mention anything else).
version 15.0
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname dcsgw1
[code]...
Cisco VPN :: ASA 5520 Client VPN Can Gets Connected But Can't Ping LAN Server
Apr 21, 2013CISCO ASA 5520 -K9 .Client can connects ASA server and get ip address(172.168.31.X),but can't ping ASA inside interface ip address and other servers in lan .
View 2 Replies View RelatedCisco WAN :: 2800 / VPN Client Gets Connected But Cannot Ping Local LAN
Jan 18, 2013I am trying to connect my 2800 Series CIsco Office router with VPN client software from home. I can successfully authenticate and get the IP address from the pool configured but couldnt ping any LAN Ips including default gateway. I am pasting my router's configuration.
IP Address Of LAN: 192.168.22.x/ 24
IP Addresses handed out to Clients: 10.10.10.5- 10.10.10.20
aaa new-model
!
!
aaa authentication login default local
[code]....
I have noticed that my virtual-access interface comes up but the line protocol of virtual-interface remains down as follows:
Virtual-Template100 x.x.x.x YES TFTP up down
Also The client PC picks up a random gateway of 10.10.10.1 which I never configured anywhere on the server.
Cisco VPN :: 5510 Remote Access VPN / Ping From Client
Jul 26, 2011I'm configuring ASA 5510 Remote Access VPN, I can connect from Cisco VPN Client to the ASA VPN. I obtain from ASA some routes to inside networks, but I can't do any ping to those inside hosts. I have got those error in ASDM log file: [code]
View 1 Replies View RelatedCisco VPN :: Inside LAN Cannot Ping RAVPN Client On ASA5500
Mar 9, 2011I have configured Remote Access VPN on an ASA5500 Firewall. I am able to login normally and Ping Internal servers on the LAN. However, The servers cannot ping my IP address that i am taking from the RAVPN Pool. So it is a one way communication.
View 2 Replies View RelatedCisco Wireless :: AP541 - Wireless Client Can't Ping Wireless Client
Oct 19, 2011I have a setup involving 3 clustered AP541 running off a sg300 switch. The wireless network setup VAP has one entry for vlan 1 with station isolation disabled. Is there anything more I need to do to allow one wireless client to ping another wireless client - am I missing something - i assume this is possible.Needless to say wireless clients can ping non wireless clients and vice versa quite happily. Everything is running with factory default settings more or less.
View 4 Replies View RelatedCisco VPN :: ASA 5520 - Cannot Ping Or Remote Desktop Connect To Any Client
Apr 18, 2013I have a need to Remote Desktop connect to company’s employees for support then they are abroad and using Cisco AnyConnect client.Cisco AnyConnect client connection works fine, clients can reach company’s inside network without problems, but I cannot make revers connection, I cannot Remote Desktop connect or ping VPN clients from companies inside network. I cannot ping clients from ASA too.I am using ASA 5520, Cisco Adaptive Security Appliance Software Version 8.4(3) Device Manager Version 6.4(7), and Cisco AnyConnect VPN Client 2.2.0133. Protocol Encryption- AnyConnect-Parent SSL – Tunnel DTLS-RC4 RC4 AES 128.
View 0 Replies View RelatedCisco VPN :: ASA 5510 - Can't Ping Or Remotely Control Some Client Machines
Feb 15, 2012We have been using the VPN client for a very long time. Our most current VPN setup is using an ASA 5510, without split tunneling. We tunnel all traffic. We are using IPSec group authentication off of an AD domain controller.
Recently I have been having some issues with some of the client machines, and I can't for the life of me figure out what the issue is. Some machines will not respond to pings, and I cannot remotely access the machines (using Dameware Remote Control) while they are connected to the VPN. Other client machines work fine. In fact there have been a couple instances where I have two machines in a remote office, using the same internet connection, both connected to the VPN, where I can ping and remotely manage one machine, but not the other. If RDP is enabled, I can sometimes get into those problem machines via RDP. But this is crippling our ability to remotely support many of our VPN users, and I just don't know what to look for.
I have tried disabling Windows firewall completely, and that does not seem to work at all. The only other thing I can think of is I recently upgraded our McAfee software. But it does not prevent us from getting connected to or pinging any of the systems on our physical network, nor to half of our VPN users. Most of our clients are running Windows 7, or Vista, and using the client version 5.0.07.0290, or 5.0.05.0290. Most of the clients using 5.0.07.0290 are using the 64-bit version.
Cisco Wireless :: 877W - Client Can't Ping Access Point
Oct 11, 2012Ive been struggling with this issue for a week now with an 877w (now with andvanced ip ios) in short my wireless network consists of
The internal dot11 sibinterface 0.11 radio (IP Address 10.0.1.1) which on bridge group 1 (IP Address 10.0.0.10) The SSID for the radio is on vlan 11 which has no ip address.
This works i can ping the internal network and internet
The guest dot11 sibinterface 0.10 radio (IP Address 10.0.3.1) which on bridge group 2 (IP Address 10.0.2.1) The SSID for the radio is on vlan 10 which has no ip address.
This dosnt work i get no no recived packets on the clients network stats and i cant ping any name servers or the radio ip address.The client is listed as being successfully accosated with the show dot11 assoc commmand
Ive tried taking the guest wireless and creating a new vlan for it (so its not on the same vlan as the tmg firewall interface) so that i have only the dot11 radio and vlan 12 on brige group 2 but the same thing happens no traffic on the guest vlan.
Ive turned off all authentication while testing this and the wireless network is currently in open mode until its fixed ive also only configured whats neccessry to test the wireless connectivity (no radius etc) that will be added later, Im also not using dhcp yet and the client is configured to the apporprite adderess staticly ie 10.0.1.1 10.0.3.2 its not a dhcp issue
!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot-end-marker!logging message-counter syslog!aaa
[Code].....
Cisco VPN :: Client Get Connect But Request Timed Out When Ping 837 Router
Apr 30, 2013I'm using the cisco 837 router as my VPN server. I get connected using Cisco VPN Client Version 5. But when I ping the router ip, i get request timed out. Here is my configuration :
Building configuration...
Current configuration : 3704 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
[Code]...
Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?
Jan 27, 2012I am setting up remote access using an RV042 router. Using quickvpn or a client-to gateway vpn and shrewsoft client, I can only access/ping the LAN side of the remote router and one machine on the remote network. The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.
2) The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.
Cisco Firewall :: ASA 5512-X / VPN Client Is Connected But Unable To Ping Internal Network
Mar 17, 2013I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
Windows 2003 Server - Dhcp Server Cannot Ping Client
Sep 29, 2011i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedCisco Switching/Routing :: 3560G Can Ping Devices In Enterprise LAN But Cannot Ping Interface
Mar 31, 2012I have a new 3560G to set up a small network for a remote site. I configured the vlan and an SVI as the gateway. The switch is also the DHCP server for the LAN. I configured Gi0/2 as L3 port, connecting to the nearest neighbor. My network runs EIGRP so i advertised the routes into the EIGRP process. The switch forms EIGRP neighbors and learns all routes in the enterprise network. The problems I'm having now are: 1. The switch learns all routes in my enterprise LAN and can ping devices in the enterprise LAN, but I can’t ping any interface on the switch from the enterprise LAN. 2.
View 5 Replies View RelatedCisco Switching/Routing :: Can Ping From R1 To R3 SVI4 Gateway But Cannot Ping Host
Dec 12, 2011I set this up and I can ping all the gateways but never the hosts. I was hoping I could make these links between 6500's a mix of L2 and L3. Check it out. They are connected in a linear fashion R1--->R2--->R3. I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4. I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration. I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.
View 3 Replies View RelatedCisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping
Jan 18, 2013From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedRouters / Switches :: Windows Ping Success But Mac Ping Fails
Aug 15, 2011When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
Linksys Cable / DSL :: X2000 DHCP Client Table Failed To Show Client List
Apr 21, 2013Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
Cisco VPN :: EasyVPN Software Client Should Connect To Client ASA 5505?
Mar 20, 2012i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
Can Ping From Server But Can't Ping To Work Stations
Jan 26, 2012I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies View RelatedCisco :: Re-size The Java SSH Thin Client In Client-less SSL?
Apr 18, 2013how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)
View 3 Replies View RelatedCan't Ping XBox 360 But Can Ping Other Devices
Mar 1, 2013I had both a Westell 7500 and a Linksys Router working fine and had my 360 setup as an extender for Windows Media Center so I could stream TV, Music, Movies, etc from my desktop to the 360. Then I switched my modem/router out with a Zyxel PH5001Z
So now today I noticed that I can no longer find my desktop through the XBox. I have adjusted my firewall settings on the modem itself, even completely disabling it. UPnP is enabled for the 360 and the device is showing under my device table. At first I wasn't able to ping any network devices but after creating an ICMPv4 Firewall rule it worked fine. I've confirmed the XBox IP Address through Network Map, the Device Table on the modem and through Network Settings on the XBox. I've diabled my modem firewall as well as Windows Firewall, completely and I still can't ping my XBox or set it up as an Extender.
I have the XBox connected wirelessly using WPA2-Personal and it's operating in 802.11g/n mode.
Cisco VPN :: ASA5510 Can't Ping VPN Clients But Clients Can Ping
Feb 29, 2012I have a strange issue on my ASA 5510 (8.4). I can't ping or connect to the VPN clients but the VPN clients can ping/connect to any inside resources. I have checked all the NAT extemtion entries.
View 3 Replies View RelatedCisco :: VPN UP But No Ping LAN
Sep 29, 2011Been racking my brains out for hours now, my remote access VPN via Cisco VPN Client is UP i can ping the RA VPN DG but cant get no further than that relevant config below i can ping 192.168.250.1 and it replies with the public ip address, but i cant ping any 192.168.101.* addresses.
View 1 Replies View Related