Cisco :: Re-size The Java SSH Thin Client In Client-less SSL?
Apr 18, 2013
how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)
View 3 Replies
ADVERTISEMENT
Jun 16, 2011
I am setting up the network for the computer institue I work for. We are discarding the old network and are going for a new network. There will be 2 Computer Labs with 60 computers in each Lab. The staffroom will have 20 computers. The Accounts department will have 5 computers. All the departments are in the same building with just 2 floors. It will be a wired network. All computers should have access to the Internet. There will be a printer each in the 2 Labs, staffroom & accounts department which has to be shared with their respective network. The Lab computers will run MS Office, Adobe software etc. Likewise the the staffroom and accounts department computers will also have to run MS Office and probably Adobe software as well. We will be using Windows Server 2003 and are inclined to use IBM servers due to a partnership. Cost isn't a major issue and the management is willing to spend to set this up rightly in the first place.My main question is whether we should go for a thin client network with everything running in the main servers. In that case how many servers should we have and what would be the ideal config of those servers.If we go for workstation PCs for each user if cost isn't an issue then what are the benefits over thin client computersDo we have to have a separate server for data?
View 5 Replies
View Related
Feb 28, 2011
I am trying to connect some thin clients to a domain based windows 2003 server. This the first time mi trying to do this. If the computer is set to workgroup there is no problem. The problem comes up when its a domain based server.I keep getting the message that the user is logged in. The host computer connecting to the server has the user name "thinclient" and I use the name "user" to log in from the thin client. But it says "thinclient" already in use and disconnect my connection between the host and the server.
View 2 Replies
View Related
Jun 3, 2013
Since two months they work full time with the new Dutch Electronic Patient Dossier.We installed 3 Cisco 5508 controllers, version 7.0.230.0 last year on a HP-switched network on a layer 2 mobility domain.Cisco 1041 AP are
The personnel works woth thin clients url... The one with the double antenna.This client has a Broadcom BCM943228HM4L 802.11 a.b.g.n (2x2) adapter.
On the client they have a connected RDP session to a server with the documents.Now they are walking from one patient to another patient. The problem they experience is a very late roaming. At the beginning of the corridor, the client will associate, but is going to roam at the end of the corridor. We installed 4 AP's on each corridor, so they signal is very well, maybe to well?
I disabled client loadbalancing and band select.The lowest data rates are also disabled. Mandatory begins at 12 Mbps. I can increase this to 18 Mbps.These clients work with PSK, with both methods (WPA-TKIP and WPA2-AES) enabled.We did this because of many old and new clients.
The customer tried to find out the problem with a smartphone, same issue. Very late roaming.I can upgrade the WLC to 7.0.240.0. The only problem I have is the WCS. When upgrading to 7.2 and higher I need to have NCS.
View 1 Replies
View Related
Jun 22, 2010
I have just configured a ASA5505 running 8.2.2 as a webvpn server for clientless VPN connections.
I need to setup a particular bookmark for a RDP session which forces the use of the java client for those who can't seem to get the ActiveX control working for some reason or another (virus scanners/firewalls/scerutiy policies etc).
I created a bookmark as follows, but it always tries to connect with the ActiveX control first when logging on from an IE client.
rdp://192.168.1.1/?force_java=yes
View 14 Replies
View Related
Jun 28, 2011
how can i store urls used by the client side in the server using java
View 1 Replies
View Related
Mar 20, 2012
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
View 5 Replies
View Related
Apr 21, 2013
Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
View 4 Replies
View Related
Oct 19, 2011
I have a setup involving 3 clustered AP541 running off a sg300 switch. The wireless network setup VAP has one entry for vlan 1 with station isolation disabled. Is there anything more I need to do to allow one wireless client to ping another wireless client - am I missing something - i assume this is possible.Needless to say wireless clients can ping non wireless clients and vice versa quite happily. Everything is running with factory default settings more or less.
View 4 Replies
View Related
Apr 28, 2011
how to connect a thin pc to another pc so me a full detail
View 2 Replies
View Related
Feb 10, 2011
I recently setup a vpn using netgear vpn/firewalls...got it working...but couldnt log on to the domain.then changed the dns server on the machine to my server on the othersidewas able to join the domain and logonfrom the otherside i can ping the server and gatewayBut i cant ping a machine (Camera security system) address 10.0.0.10no replyi have a software client that connects to the machine...and its working on the otherside.the addresses are in the same range 10.0.0.x as the camera system on the otherside
View 1 Replies
View Related
Oct 26, 2011
The message ID I can use to filter VPN clients connecting and disconnecting from the Firewall?
View 1 Replies
View Related
Nov 17, 2012
We have a Cisco 5505 firewall and working to setup VPN through the firewall, what Cisco vpn client should we download for our users to have the right client on their desktop/latops.
View 3 Replies
View Related
Jan 26, 2011
i have a 5510 with a working VPN but discovered that anyone connecting from a public IP can connect to VPN but can't go anywhere.so if i have say a linksys wifi on my cable modem and a private IP i can connect no problem. but if i'm on like a verizon data card which gives me a public IP i can connect to VPN but receive the below errors in my asa logs and can not reach anything on the network.What do i need added to allow remote ends without a nat device to also work?
View 4 Replies
View Related
Jan 19, 2013
I have configured Clientless SSL VPN on 2821 router with IOS12.4//Its running fine and I am able to open local portals I have mentioned in the SSL URL List.
View 1 Replies
View Related
Jun 29, 2012
Using VPN client 5.0.7 Able to get vpn ip address But cant access remote desktop or any network inside, I was able to access before But I dnt known what changes happen on my laptop which is unable to access now ,I have reinstall the client again but no use' Able to access the same vpn & rdp with another laptop & also other users can access' Except my laptop What can be the issuse with my laptop.
View 1 Replies
View Related
Jan 1, 2012
Since last week we are having problems with remote users working with VPN client on Windows XP.The connection is stablished but no data traffic occurs.
As we didn't do any change in vpn remote settings I did a test from Linux machine running VPNC client and it works well.It sounds so weird because it happens only on Windows client platform.We have CISCO ASA 5510 and PIX 515 running 8.0(4).
View 4 Replies
View Related
Jun 1, 2012
I have a requirement as per our security standard all VPN user ID must change the password during intial logon
I am using cisco VPN client 4.6 .0 anf 5.0.0 suspending my IPSEC VPN on head end ASA 5520 device , authenticating VPN user using ACS 5.3.0 . All the VPN user are created internally on ACS 5.3.0 , i have turned on password management on ASA configuration towards tunnel group and i have enabled MS-CHAPv2 on ACS for password change during intial logon .
I have created internal user with password change during inital logon and tired connecting to my VPN .Intially it prompt for password change , after changing the password to new password .
When i am trying to connect , i am seeing strange behaviour VPN client is not able to connect to the peer , VPN client is not responding for few minutes , What should the problem , is there problem VPN client or ACS configuration .
when i remove this password management from tunnel group , VPN users are able to connect with any issue , but the concern is none them able to change the password , we not have ADS on our network all User ID are created internal on ACS server .
View 2 Replies
View Related
Apr 17, 2011
I hv a ADSL Router with DHCP enabled and inturn connected to IB-WRX150N as wireless and wired router setup with DHCP "disabled". I have given SSID for wireless router. All this on 192.168.1.x range of IPs. I have DWL G730AP which Iwant to setup as wireless AP connecting to WRX150N. I am unable to do it even after speding significant time. Its Site Survey is not detecting any WIRELESS network even though DWLG730Ap is right beside WRX150N.
View 3 Replies
View Related
Oct 12, 2011
i can't get my ping of client ip.
View 1 Replies
View Related
Jan 20, 2012
I am in charge of a network that has two dns servers with directorys, one main and one for back up. I also have a cisco firewall.When I run a scan on my network, the scan results return clients that have two diffent IP addresses for one client or server etc.
View 1 Replies
View Related
Jan 25, 2013
why my client can't internet access from my config
(INTERNET)-------->[ROUTER]---->[CLINET]
Clinet :
Ubuntu LTS 12.04
IP 192.168.100.2
Netmas 255.255.255.0
Gateway 192.168.100.1
DNS Server 202.134.1.10
View 7 Replies
View Related
Jun 13, 2012
We have a few users connecting to another companies Firewall using the Cisco VPN Client, we are pretty sure our PIX (sat at the edge of our network) is causing issues whereby after an unknown amount of time the VPN client will timeout and lose connectivity.I did outputted some level 7 debug to syslog and I cannot see anything that happens during the time he has lost connectivityI can see his RDP packets getting denied to the remote ends private IP address but nothing that shows a denial or a drop of anything from our pix.We are sure its this pix as we used to connect via a different route and a different pix and it never dropped
View 2 Replies
View Related
Jul 4, 2011
I can connect to it fine and access everything behind the VPN. I have a Windows 7 machine 32 bits. He can connect to the VPN just fine but not access anything behind it, he is running Windows 7 64-bits. This is not a new setup, the VPN has been working before. If I debug ISAKMP and IPSEC in the ASA I see nothing out of the ordinary. The only thing I see is that the VPN client on his machine is showing that the counter for discarded packets is increasing. This is Ciscos explanation to discarded packets. "Packets discarded—The total number of data packets that the VPN Client rejected because they did not come from the secure VPN device gateway." So it seems that the client does not believe that the packets are from the ASA. I have no idea why that would be and what could have changed that made a functioning VPN turn into a non functioning one. He can not remember doing any major installs or something like that which could mess with the client. We uninstalled the version he was using and installed a slightly newer version but it made no difference.
View 1 Replies
View Related
Feb 28, 2011
Is it possible to log when a user connects/disconnects their VPN session? They are connecting to an asa 5510.
View 5 Replies
View Related
Mar 22, 2011
I just recently bought a ASA5505 with a licence that can have 2 WebVPN Peers, I would like to have a phone to my CCME server as one of the options within that web-vpn thingy.
View 3 Replies
View Related
Jan 14, 2012
The embedded telnet client is OK but what about a ssh client? It could be a very useful feature for debugging remote servers or network appliances in a secure fashion.
I understand the overhead concerning the image size and CPU usage, but it seems that both the flash memory and the CPU could handle ssh client integration. Naturally, it as to be fully compatible with IPv6 in dual stack enabled environment.
View 3 Replies
View Related
Apr 22, 2010
ASA 8.21Within a clientless WebVPN homepage, is there a way to open a listed link/bookmark in a new tab? When I try to do it with the browser (right click.. Open in New Tab) it simply opens the site in the current tab.
View 2 Replies
View Related
Jan 23, 2012
I have a fresh install of LMS 4.0 on Windows Server 2008 Standart SP2. I have one NIC with static IP configuration. I also disabled DHCP client.The problem is follows: when I go to Inventory - Device Administration - Add/Import/Manage Devices, I always get this error:Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and then refresh the page.Reload server/ Daemon Manager dont solve this.I try to beat this problem 2 days already. Second uninstall also doesnt solve the problem..
About a week ago I tried to clear log files which was 270gb (syslog.log) and after that restarted the server. And all inventory devices suddenly disappear! I could find it from search menu but cant access - cisco works said that there is no such a device in Device Repository or I havent enough right to view it (but i logged as admin). And after this i failed to add any device in Inventory. So I reinstall Cisco Works and get that DCR error..
View 1 Replies
View Related
Feb 10, 2011
I have been trying to conect a Cisco VPN client through an ASA and it makes the connection but doesn't allow any traffic through. The ASA does have a site to site VPN attached to the outside interface.I suppose the first question is it possible to allow VPN client to connect through an ASA 5500 from the inside network when there are Site to Site VPN's already attached to the outside interfaces?If possible then what have I missed. I have tried adding NAT exempt for the traffic between the internal networks and "an IPSEC pass thru Inspect Map".
View 4 Replies
View Related
Nov 17, 2011
Completly new to Cisco ASA and need to get this working ASAP.ASA 5505 8.4(1) is the secondary FW and I need for it to allow everything going out and block everything coming in but for the VPN clients. Since a Cisco moron, I used the ASDM and it's wizards to make this work, which might explain my situation.
[code]....
My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x server or service (tried telnet, RDP, ping, etc.)
View 2 Replies
View Related
Apr 7, 2013
I have configured my ASA5520 to act as VPN server. It accepts connections from the internet and then it authenticates the user to a Windows 2008 Server via Radius.Everything works fine if I use the VPN client embedded in Microsoft Windows. Conversely, if I try to configure Cisco VPN Client, I cannot find where to define the PSK string.
View 3 Replies
View Related
Feb 24, 2012
I have configured VPN client on my ASA 5510,
I am trying now to telnet my call manager on port 5060 and on port 2000.
When i am connected localy i am able to telnet both ports, but when i am trying to connect through cisco VPN client i am able to telnet the port 2000 and not able to telnet 5060. Both ports are on the same call manager.
When using windows VPN i am able to telnet both ports.
if i removed inspect SIP from: policy-map global_policy class inspection_default
View 8 Replies
View Related