ASA 8.21Within a clientless WebVPN homepage, is there a way to open a listed link/bookmark in a new tab? When I try to do it with the browser (right click.. Open in New Tab) it simply opens the site in the current tab.
View 2 RepliesWe have 2 ASA5520's running SSL VPN, we would like to allow users to create their own bookmarks but so have been unable to find out how
View 1 Replies View RelatedI just reinstalled windows and am trying to restore my previous settings. I was wondering how to do that, specifically with the bookmarks.I originally saved my bookmarks with an export, and I have the saved file.I cannot seem to get my bookmarks back. I have tried all of the options.I am using the internet browser, google chrome.
View 2 Replies View RelatedCame across problems with missing Bookmarks on an SSL RA VPN (ASA 8.4, ASDM 641)?I have an SSL group policy which is configured to use a Bookmark list. When a user signs into the SSL VPN, they can see other settings that have been manually configured such as Smart Tunnels but no bookmarks appear. I know the user is receiving the correct group policy (I created a banner which the user gets successfully when they sign in) but I'm at a bit of a loss.
View 3 Replies View RelatedI'm wondering if it's possible to setup SSL VPN connection via OPEN VPN client?I'm a Mac OS 1.7 user with Tunnelblick.
I tried to use "built-in" SSL VPN Tunnel client but unfortunately it's not working - during installation Java exception appears saying that either I don't have admin privileges or there is not enough space.. Of course I'm admin and there is plenty of space...
When I try to FTP into my server at home, which is running Filezilla server, and I try to connect via my Filezilla client, it gives me:"425 Can't open data connection.". I see this error on the client side and on the server side and on the client side, its not listing the directory.However, when I go and connect via SmartFTP, I sat on Google for about half an hour trying to find this problem out, went through the wiki, I know it isn't my router (I'm running pfSense). My NAT configs and firewall exceptions and port forwarding are all configured correctly. This just seems like a problem with Filezilla itself. The Filezilla Client can't connect to the Filezilla server but yet SmartFTP, as well as a friend of mine using FTPX can connect just fine.I can remote in via VNC, VPN in and contact my proxy server just fine from the outside.
View 4 Replies View RelatedI was wondering if i can create (a) bookmark(s) of resources which are located behind a particular Site-to-Site VPN?We are using a Cisco ASA 5510 (9.0.2) with SSL VPN configured. The tunnel is up but when i try the bookmark, i get the error "server unavailable".
View 2 Replies View RelatedI have several SGE2000 in production and every night I save the current configuration to a tftf server... from time to time I get the following error: [code] Can't open TFTP client.At this time, the only way to be able to save the config again is rebooting the switch, but this is not a solution I am comfort.
View 5 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View Relatedi have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)
View 3 Replies View RelatedDo the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
I have a setup involving 3 clustered AP541 running off a sg300 switch. The wireless network setup VAP has one entry for vlan 1 with station isolation disabled. Is there anything more I need to do to allow one wireless client to ping another wireless client - am I missing something - i assume this is possible.Needless to say wireless clients can ping non wireless clients and vice versa quite happily. Everything is running with factory default settings more or less.
View 4 Replies View RelatedI have a Cisco 877 connected to a VSAT modem, and I can't open ports outside, I dont know why?The Cisco 877 Fa0 port is connected to the VSAT modem at VLAN9, and the rerst of ports are connected to the local lan network at Vlan2. I can enter to Internet, but I can't open port outside. ADSL over pots is not used here.I need to open port 81 for ip address 192.168.1.130 and I dont know why this isn't working. Also if I do: sh ip nat translations I see this:
sh ip nat translations
cisco877#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 172.30.xx.122:81 192.168.1.130:81 --- ---
udp 172.30.xx.122:81 192.168.1.130:81 --- ---
[code].....
On one of our firewalls we hosting a application/service which impacts clients and we recently conducted a Pen test, the external company doing the Pen test have advised us that there is a vulnerability relating to OpenSSL. We have checked the server and there is no OpenSSL installed so the only place where it could be picking this up is on the ASA, is this correct?Here is the report from the company that conducted the test:4.3 Network Security An outdated OpenSSL package was identified that was vulnerable to a heap corruption bug that may be exploited by an attacker to acquire command execution on the host, or to create denial of service conditions. Table 7 provides an overview of the risk identified per network assessment category, along with recommendations for resolving the issues identified. Category
Risk
Summary
Recommendations
Patch Management
High
The OpenSSL package installed on one host was identified as being outdated and subject to a heap corruption bug. Update the outdated / vulnerable OpenSSL package to the latest stable version. We have an ASA5520 and running the following version: Cisco Adaptive Security Appliance Software Version 8.2(5)2 How do we check the OpenSSL on the ASA and secondly do we need to update the ASA software version ?
I need to open ports 25, 993, 995, 443 and 465 to setup MS-Exchange. I don't have an inhouse IT guy and this seems pretty straight-forward in theory but I can't figure it out I need to open ports 25, 993, 995, 443 and 465 to setup MS-Exchange.
View 5 Replies View RelatedCisco Works (LMS 3,2) is not closing SSH sessions to a Cisco ACE module, I see the following thread and tried the workaround to no avail.
[URL]
I have also seen the following caveat (CSCtz42393) but this seems to be LMS 4.x, would this be 4.x and below or do I need to find the equivalent LMS 3.2
I'm setting up a second exchange 2010 server at a DR location and have been experiencing some problems. The two sites are connected via a pair of ASA5510's using the point to point VPN. I want to rules out any possible VPN issues that may be blocking ports and wanted to see if there is an easy way to do this and simply allow all traffic without any restrictions between the two ASAs. I've attached the scrubbed configs here...Ewing is the primary site and DBSi is the DR site.
View 2 Replies View RelatedLMS 3.2 can't open Manu Device Troubleshooting only begin I will check manu Device Troubleshooting but LMS 3.2 can't show detail about Device and show error on windows.I need fuction Device Troubleshooting becouse ATP customer.
View 1 Replies View Relatedhave ether-channel across 2 switches?i am new in cisco LMS . now i am in client site installing cisco LMS 4.1 in UCS server-rack version. we did it well for the installation, and the LMS working properly until i cannot open topology service.
i attached the error message
what command should I use to see all open TCP and UDP ports on my router?
View 2 Replies View RelatedHow can I allow all ports to be open? I don't really want my 1811 to block any traffic. I tried the command access-list 1 permit any which allows me to surf the internet, but when I check my web server, and port 3389 (Remote desktop) on yougetsignal.com it says those ports are blocked.
View 6 Replies View RelatedSince downloading constant guard and Norton on my computer, I can connect to a wireless router but cannot open a web browser. My network diagnostics says could not make HTTP/HTTPS/FTP connection.I have tried many different things. IP configuration is correct. It will ping out to the internet and receive back without a problem.
View 8 Replies View RelatedFor a few weeks now, I couldn't open any long links on Twitter. I can only open short links which can be highlighted, then right-click and "switch to 'website'". For example, I can open this link, because it's short enough to highlight the whole thing and then rightclick:It opens like that because it directly goes to that website without going through the shortened link first.When there's a long link like this one it won't open, just bring me to a page which says:"Oops, Google Chrome couldn't find t.co"This was mainly on Twitter, but now I found out that none of the shortened links like bit.ly, etc work either.
View 9 Replies View RelatedHow to make Nas Box accessible by his customers so that they can upload large files to it rather than rely on posting these to him (e.g. on CDs/DVDs).He has the Nas Box for his own use and ideally would like to link it through his business website so that a customer can go there and upload files. Another option seems to be opening the network to his customers as well but I'm not sure about how to approach either of these options.
View 1 Replies View RelatedI am pretty new to Cisco - and I have a little 506E that I love. I got it working with my first scenario where I have one server that is my web, and e-mail server.I also opened the RDP port so I can remote into it. The IP's for the old server are internal 192.168.1.23 name ferbweb-external 71.12.111.219 name ferbwebpub. Now - I need to add another server in the exact same way with the same ports 80, 25, and 3389 open to the outside - IP's internal 192.168.1.31 name ferbmail and external 71.12.111.220 name ferbmailpub.I can get to all of these ports on the new server on the inside network - so that is not the problem.So, I went into the config, copied the statements for the old server, and changed them for the new server and added them to the config. I can still get to the old server from the outside fine, but cannot get to any ports on the the new server from the outside at all.I have done a lot of research, and cannot find what I am doing wrong.
View 6 Replies View RelatedI had bued a WRP400-G2 device today and found 3 problems here (after upgrade firmware to latest). But biggest problem is that I can't open a bug case in TAC becouse I bued device from retailer and have only one year warranty. Is it possible to contact technical support of Cisco by email or Web site? It will be a problem to contact cisco support by call.
View 4 Replies View Relatedi just ran a NMAP scan on the outside interface of a ASA 5520. It seems that the TCP Ports 7070 and 554 are open on all NAT interfaces and the outside interface of the firewall. I tried telnet on port 554 and 7070 and got connected.
View 10 Replies View RelatedI want to setup BB to monitor snmptraps with failure. The BB log shows can't connect to all switch ports 161, and I even can't telnet to XXX_17f 161 for example. My switches are Cisco C3550, C2950, ASA etc.
Mon Nov 7 15:43:03 2011 bbnet Can't connect to server XXX_17f on port 161
Mon Nov 7 15:43:03 2011 bbnet Can't connect to server XXX_9f on port 161
Mon Nov 7 15:43:03 2011 bbnet Can't connect to server XXX on port 161
I am replacing a Netgear wireless router (WGR614v10) with a Cisco WRVS4400N. When I go to set up the device on my Mac, 192.168.1.1 will not open in a browser. Do I have to do the setup on a PC?
View 2 Replies View RelatedI have open my 25, 110, 80 port on my Server from local i can telnet all those via my private ip but from public ip its not responding.
2nd thing I can ping both ips of My server through private ip and through public ip.
I have a 2911 router with some cisco 2950 switch WAN is 4Mb fiber Why open a Web page is very slow. [code]
View 5 Replies View RelatedI need to open ports 5000 and 5001 on my Cisco PIX 501 to enable some users to be able to connect to our CCTV from outside, how should I open these 2 ports?
View 1 Replies View Related