I hv a ADSL Router with DHCP enabled and inturn connected to IB-WRX150N as wireless and wired router setup with DHCP "disabled". I have given SSID for wireless router. All this on 192.168.1.x range of IPs. I have DWL G730AP which Iwant to setup as wireless AP connecting to WRX150N. I am unable to do it even after speding significant time. Its Site Survey is not detecting any WIRELESS network even though DWLG730Ap is right beside WRX150N.
View 3 RepliesDo the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)
View 3 Replies View RelatedI have a setup involving 3 clustered AP541 running off a sg300 switch. The wireless network setup VAP has one entry for vlan 1 with station isolation disabled. Is there anything more I need to do to allow one wireless client to ping another wireless client - am I missing something - i assume this is possible.Needless to say wireless clients can ping non wireless clients and vice versa quite happily. Everything is running with factory default settings more or less.
View 4 Replies View RelatedI recently setup a vpn using netgear vpn/firewalls...got it working...but couldnt log on to the domain.then changed the dns server on the machine to my server on the othersidewas able to join the domain and logonfrom the otherside i can ping the server and gatewayBut i cant ping a machine (Camera security system) address 10.0.0.10no replyi have a software client that connects to the machine...and its working on the otherside.the addresses are in the same range 10.0.0.x as the camera system on the otherside
View 1 Replies View Relatedi can't get my ping of client ip.
View 1 Replies View RelatedI am in charge of a network that has two dns servers with directorys, one main and one for back up. I also have a cisco firewall.When I run a scan on my network, the scan results return clients that have two diffent IP addresses for one client or server etc.
View 1 Replies View RelatedI am currently working on a project which purpose is to establish a TCP connection between a PC and a microcontroler.I configured (in C language) the µC as the server, and the PC as the client (in C#, using the TCPClient class).While running the codes, I capture the frames on the network with Wireshark.The client's ISN is chosen randomly by the TCPClient.Connect method.Since there will be only one TCP connection at a time, the server's ISN is always 0.The server's port is 0xC0C0 (49344) and the client's port is also chosen randomly by the TCPClient.Connect method.find the screenshot of the Wireshark's capture attached.In compliance with RFC793, the three-way-handshake should conclude with an ACK segment from the client.In my exemple, the client tries to connect three times, and then drops : the client sends no ACK segment.The µC's SYN-ACK reply may be bad configured .What kind of information did I miss ? Are there special data the client is expecting ? Why don't I get back an ACK segment from the client?
View 3 Replies View RelatedWe currently have a company network set up with a PC acting as a shared resource containing shared folders for everyone to access (approx 30 users)The network is comprised of a business internet connection to a 5 port router which is then connected to a 5 port switch connecting to 4 computers and another switch which is connected to another 4 computers and again to another switch - this continues for approx 30 - 35 computers.We have 2 shipping databases connected to the first switch (2 of the for first computers mentioned) and about 15 of the 30 clients need to access these. Because there is this many people on the network we are running really slow and losing access to the databases/shared files on the network.We do not have the expertise or time/money to set up a true server/client network.We are moving to a bigger building and potentially hiring 10-20 more people.We are thinking about having a small (5port router) and branching it off to 2 24 port gigabit switches and the business folder and having one switch contain the 2 databases and all the users who need to access it and the other switch containing all the other users.
View 18 Replies View Relatedi keep getting the message install email client how do i do it
View 1 Replies View RelatedIs there a way to check or record from where the Windows XP pro workstation is getting the wrong IP address and placing it into its DNS cache?
[code]...
I insert data from two clients.(1 window server 2003,2 XP clients ) the two client print paper and the printer is shared printer. At the same time two clients print paper and the printer stop working. So I restart my two clients and server. After restart the clients cannot ping to server.
View 1 Replies View RelatedMy brother keeps downloading torrents and I don't want him to so I was wondering if there was a way to keep torrents from going from my router to his computer but still give him access to the internet. I have a Linksys WRT160N V3 router.
View 7 Replies View RelatedWe have a small office environment, about 8 wired connected PC, 2 IP printer and 2 modem/router (wireless).Most of the time, guests and other staff access our internet through Wifi. Few days back, i have notice the ON and OFF activity of our modem (satellite) causing to disrupt our communications. This activity been observed for the last couple of days. Later on, I found the culprit, some tech savy individual are messing around with our modem, accessing then rebooting the equipment.Is there any ways to hide or prevent clients to access to our modem? The satellite modem is DHCP (172.xx.xx.xx) enabled and unconfigurable.My present setup MODEM>> SWITCH>> ROUTER>> PC.
View 13 Replies View RelatedWhat is the difference between AP, Client and Repeater. There is a switch on the back of my Access Point and I just wanted a little bit of knowledge of what they are and what are the best situation I would use them in?
View 3 Replies View RelatedI have two wi-fi network, and i have written client server model in c (Linux), client has three threads and each thread having different physical wi-fi conection to server. But the problem is that, overall data rate is not increased by this, it is similar to using with one wi-fi connection.
View 1 Replies View RelatedThe message ID I can use to filter VPN clients connecting and disconnecting from the Firewall?
View 1 Replies View RelatedWe have a Cisco 5505 firewall and working to setup VPN through the firewall, what Cisco vpn client should we download for our users to have the right client on their desktop/latops.
View 3 Replies View Relatedi have a 5510 with a working VPN but discovered that anyone connecting from a public IP can connect to VPN but can't go anywhere.so if i have say a linksys wifi on my cable modem and a private IP i can connect no problem. but if i'm on like a verizon data card which gives me a public IP i can connect to VPN but receive the below errors in my asa logs and can not reach anything on the network.What do i need added to allow remote ends without a nat device to also work?
View 4 Replies View RelatedI have configured Clientless SSL VPN on 2821 router with IOS12.4//Its running fine and I am able to open local portals I have mentioned in the SSL URL List.
View 1 Replies View RelatedUsing VPN client 5.0.7 Able to get vpn ip address But cant access remote desktop or any network inside, I was able to access before But I dnt known what changes happen on my laptop which is unable to access now ,I have reinstall the client again but no use' Able to access the same vpn & rdp with another laptop & also other users can access' Except my laptop What can be the issuse with my laptop.
View 1 Replies View RelatedSince last week we are having problems with remote users working with VPN client on Windows XP.The connection is stablished but no data traffic occurs.
As we didn't do any change in vpn remote settings I did a test from Linux machine running VPNC client and it works well.It sounds so weird because it happens only on Windows client platform.We have CISCO ASA 5510 and PIX 515 running 8.0(4).
I have a requirement as per our security standard all VPN user ID must change the password during intial logon
I am using cisco VPN client 4.6 .0 anf 5.0.0 suspending my IPSEC VPN on head end ASA 5520 device , authenticating VPN user using ACS 5.3.0 . All the VPN user are created internally on ACS 5.3.0 , i have turned on password management on ASA configuration towards tunnel group and i have enabled MS-CHAPv2 on ACS for password change during intial logon .
I have created internal user with password change during inital logon and tired connecting to my VPN .Intially it prompt for password change , after changing the password to new password .
When i am trying to connect , i am seeing strange behaviour VPN client is not able to connect to the peer , VPN client is not responding for few minutes , What should the problem , is there problem VPN client or ACS configuration .
when i remove this password management from tunnel group , VPN users are able to connect with any issue , but the concern is none them able to change the password , we not have ADS on our network all User ID are created internal on ACS server .
I decided to switch away from my DIR-655 wireless router due to multiple issues and go with an Untangle box. Everything appears to be set up great... except when it comes to my VPN connection to work via Juniper VPN Client v. 6.5.0.15507. For some reason, the VPN connection keeps dropping every 3-5 minutes and I have to wait for it to either reconnect, or sometimes the client completely stops and I have to restart it.
View 16 Replies View RelatedI find it troubling that i would have to pay for additional licensing to use the mobile version of anyconnect.
Is there a third-party app that will allow a secure connection back to my house from my iPhone?
If I have an 802.11g client on an 802.11n network, will that 802.11g client slow down the 802.11n network simply by being connected, or only when it is transmitting data?
View 1 Replies View RelatedI'd like to know when the DHCP client will send DHCPInform (8)? And how can I force the client to send this type of message?
View 1 Replies View Relatedi am a ict teacher. at my lab all student computers (clients - win 7 ultimate) are connected to server 2008 machine. student are unplugging the network cable and try to log on some account which has time restriction so client computer is logging him on by using cache user. how can i solve that problem.i want always the network cable to be plugged and force students to use their own account in lesson time.
View 3 Replies View Relatedwhy my client can't internet access from my config
(INTERNET)-------->[ROUTER]---->[CLINET]
Clinet :
Ubuntu LTS 12.04
IP 192.168.100.2
Netmas 255.255.255.0
Gateway 192.168.100.1
DNS Server 202.134.1.10
used to be able to access pc usieng fing now can not access used fing.Accessed a win 7 client with my android. Reset the router now i can not access the win7 but able to access 2vista a different win7 pc and able to access other devices on nerwork. Can see the win 7 machine in question but can not connect with samba client.
View 2 Replies View RelatedMy IT Department has recently installed Kaspersky Endpoint Security 8 on our laptops. Through a conversation with my IT guy I found that they can literally see what we are installing/uninstalling, surfing etc on our machines. When I am at home I am connected to my own private wireless network with my work laptop and I RDP to my home computer to surf/download files etc to my home machine. My question is, can my IT department track what I am installing/surfing on my home PC that I am connected to RDP? I was thinking of putting my RDP on the outside so I can connect to my home network and surf securely without my IT department keeping tabs on my history.
View 1 Replies View RelatedWe have a few users connecting to another companies Firewall using the Cisco VPN Client, we are pretty sure our PIX (sat at the edge of our network) is causing issues whereby after an unknown amount of time the VPN client will timeout and lose connectivity.I did outputted some level 7 debug to syslog and I cannot see anything that happens during the time he has lost connectivityI can see his RDP packets getting denied to the remote ends private IP address but nothing that shows a denial or a drop of anything from our pix.We are sure its this pix as we used to connect via a different route and a different pix and it never dropped
View 2 Replies View Related