Two Client Socket For Same Application?

Mar 31, 2012

I have two wi-fi network, and i have written client server model in c (Linux), client has three threads and each thread having different physical wi-fi conection to server. But the problem is that, overall data rate is not increased by this, it is similar to using with one wi-fi connection.

View 1 Replies


ADVERTISEMENT

HA Failover For Socket Application?

Sep 15, 2011

I have a tcp socket server application. Some of my clients are asking if I can provide server redundancy for my tcp service for HA purpose. I know it can be done using Windows NLB but the cost of the Enterprise edition is beyond the budget of most of my clients. DNS failover is also out since it will involve fiddling with the DNS server. I'm would prefer to setup a simple solution in which I check the status of the primary server and then if the primary is down, change the ip address of the secondary to the primary so that the service remains available. This sounds simplistic, and besides different clients use different networks, e.g. AD, but I'm not a networking guy so I am at my wits' end.

View 2 Replies View Related

Getting Red And Orange Lights On LAN Socket?

Mar 29, 2012

I m getting red & orange lights on lan socket

View 1 Replies View Related

Cisco Application :: 389 Vip Not Responding To Client Requests On ACE

Jan 4, 2012

client is unable to establish a connection to the backend servers via the vip on port 389 ,636 configured that servers are listening on these ports .even the probe is successful on port 389 but not getting any response back from the servers. [code]

View 1 Replies View Related

Cisco Application :: CSS11503 / How To Preserve Client Port On CSS

Mar 12, 2012

I’m wondering if there is a way to configure CSS11503 running 8.10 so that the servers in the content rules can see the client port number?The servers can see the client IP, but not the port!! It seems when forwarding packets to the servers in the content rule, the CSS uses a new high-number port when communicating with servers.

View 2 Replies View Related

Cisco Application :: ACE-20 Module In Bridged Mode With Client NAT

Apr 15, 2012

Whatever a NAT is supported for ACE-20 module? I do need to convert working CSM(SLB) config to ACE configuration and I am not quite sure if the configuration below is correct. ACE module should be configured in bridge mode with two vlans - vlan 36 (client) and vlan 436 (server) - bridged with interface bvi 36. NAT on ACE configurad as "nat dynamic 1025 vlan 436" into corresponding "policy-map type loadbalance". Check two parts of configs and if the ACE config is properly converted from CSM and will be working in the same way (especialy for NAT). [code]

View 2 Replies View Related

Cisco Wireless :: Few Pins On RJ-45 Socket Are Damaged

Sep 5, 2011

I have a problem with my AP. Basically when I plug it in to the PoE switch it will start up (I can see the lights) but for some reason there is no light on the PoE switch. Looks like there is nothing connected. I chave changed the cable, port on the PoE switch but still the same. Is it possible that maybe few pins on the RJ-45 socket are demaged or there may be sth else.The other APs start without any issues and the light is always on on the PoE switch.I also need to add that the AP can not get the IP address.

View 9 Replies View Related

Cisco Application :: ACE-4710 Forwarding Of Client Certificate Information

Nov 25, 2009

I have an environment with SSL termination and client authentication with a client certificate. Now, the backend server application needs to be informed of the client DN information present in the presented client certificate. Is it possible to tell the ACE to send specific client certificate fields to the backen server via insertion of an HTTP header or, to forward the entire client certificate in any way to the backend server ?

View 2 Replies View Related

Cisco Application :: ACE4710 Troubleshooting Connection Failure From Client

Nov 12, 2012

I have a ACE4710 setup to load balance a couple of web servers. The real servers all show as inservice as do the propbes and serverfarms/virtual servers. If I ping the Virtuual server ip address I get a reply but it I try to access VIP via telnet or web browser. I get a connection could not be open error on the client.The question is how do i determine where the error is comming from so far I can not tell if the client is getting through the acl or not.I have used the trouble shooting guide and nothing has worked to determine the cause so far. show service-policy int479 detail does not show an increase in the hit count when I try to connect.show stats conn does not show an increase in failed or timed out connections when i try to connect. [code]

View 3 Replies View Related

Cisco Application :: ACE 4710 Original Client IP Address Reconstruction?

Jan 12, 2011

configuration example on how to reconstruct the original client IP address from X-forwarded-for in HTTP request?

View 4 Replies View Related

Cisco Application :: 11506 / CSS SSL - No SYN To Server Before Client Initiates Traffic

Jan 24, 2013

I have a web application behind a SSL-offloading CSS 11506 that may require the server to be able to use a SSL connection as soon as it is established.    At least I'm troubleshooting a problem that is starting to look like this is a possibility.
 
The default behavior seems to be to not start the SYN/SYN-ACK sequence with the real server until the client starts talking first (such as send an http get request), even though the SSL termination part is done and ready.  
 
Any way to change this behavior?   The scenario is a webapp.  Client side starts more than one SSL session to the server, but only uses one immediately.   The client knows it has more than one connection and may have told the server so.    Like a control plus data channel(s) arrangement.   The client opens all the connections (full SSL handshake on all channels), starts using the control channel, and expects the server to start talking on the data channel.     However, since the client hasn't sent anything down that TCP connection first... the server doesn't have it.
 
I don't think this would occur when the server is doing the SSL... as it should have all the TCP connections as soon as the SSL handshakes are done. 

View 2 Replies View Related

Cisco WAN :: 5510 - How To Change Socket Timeout In Router

Feb 21, 2012

We have an application which is accessed over WAN (V-Sat) and the end users are facing the session timeout problem frequently .

View 2 Replies View Related

Cisco Application :: ACE 4710 Configuration - Client / IP Address Access For Web Server

Oct 15, 2011

I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.

View 3 Replies View Related

Linksys Wireless Router :: WRT310N Could Not Write To Transfer Socket

Sep 28, 2011

I am trying to FTP a 25MB file to a client using FileZilla and my wired WRT310N router. In the past I have never had a problem but now I am getting the following error: Could not write to transfer socket: EPIPE - Local endpoint has been closed.I changed the MTU to manual - 1500 on the router.I am using an almost brand new iMacThe iMac firewall is OFFTimeout in Filezilla is set to 0.The transfer stops at about 12MB everytime I try; which is ~ 35 seconds.

View 6 Replies View Related

Linksys Cable / DSL :: WAG 200G - Installing Power Socket Not Working?

Mar 8, 2012

I purchased wag 200g from dubai more than a year ago. When i tried installing the power socket never worked and till date I never got a solution for this. At present I do not have any documents relafinding a cisco authorised service center in India but in vainted to this product but this issue could not be solved by any computer service center.

View 1 Replies View Related

2176 - How To Enable Ports On Wireless Network For Java Socket Programming

Apr 10, 2012

I have written a java server-client program. The server accepts incoming connections on port 2175 and writes responses on 2176 which the client listens on for the response. I am sending serialzed objects over the network.

Problem: This all works well if I run my client on the same machine as the server. I put together a client jar and deployed it on another machine running on the same wireless network as the server. Now I get a "ConnectionException :Connection refused". So I thought I should hardcode the server and client IP's but that still didnt work.

Question: What else would I have to do to get the two computers to talk to each other (in terms of networking not java)?

View 3 Replies View Related

Cisco Application :: ACE20 - Config Application In Progress Message

Dec 3, 2012

Everytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
 
If I run show download info, I get:
 
context : context1
Interface                     Download-status
--------------------------------------------------------------
187                         In Progress
199                             Pending
 
Regex download optimization status : Couldn't get status[TNRPC Timed out]
 
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].

View 2 Replies View Related

Cisco Application :: Application Slowness Through ACE 4710

Mar 27, 2013

Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.

View 6 Replies View Related

Linksys Cable / DSL :: X2000 DHCP Client Table Failed To Show Client List

Apr 21, 2013

Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.

View 4 Replies View Related

Cisco VPN :: EasyVPN Software Client Should Connect To Client ASA 5505?

Mar 20, 2012

i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
 
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?

View 5 Replies View Related

Cisco :: Re-size The Java SSH Thin Client In Client-less SSL?

Apr 18, 2013

how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)

View 3 Replies View Related

Cisco :: Application Layer Service The Same As Application Layer Software?

Apr 3, 2012

I am taking an introduction class to CCNA and we are focusing on the Application Layer,and I'm having some difficulty in understanding what is an Application Layer Service. Is the Application Layer Service the same as Application Layer Software?

View 3 Replies View Related

Cisco Wireless :: AP541 - Wireless Client Can't Ping Wireless Client

Oct 19, 2011

I have a setup involving 3 clustered AP541 running off a sg300 switch. The wireless network setup VAP has one entry for vlan 1 with station isolation disabled. Is there anything more I need to do to allow one wireless client to ping another wireless client - am I missing something - i assume this is possible.Needless to say wireless clients can ping non wireless clients and vice versa quite happily. Everything is running with factory default settings more or less.

View 4 Replies View Related

Assign Application To Use Certain Ip?

Jul 31, 2012

I have a windows 7 pc and i would like to run SKYPE on network A as it uses alot of data.I would like all other programs to run on network Bi notice in skype options it uses port 12406. is it possible to set a rule that all traffic on this port be assigned to the IP of network A?ive read through some forums and i found this link regarding load

View 4 Replies View Related

Application And Database Servers

Oct 13, 2011

I have question about the basics of a high performance application and database server connection to each other. I have two servers, one application and one database server. Both of them are Windows 2008 R2 servers. I would like to connect them. What is the best configuration for quicker communication between them. Is it better to connect them through a network switch? Or directly connect them? Do I need to dedicate one of the ethernet ports on each server to separate their traffic to each other, from the internet connection traffic?

View 5 Replies View Related

Static Ip To Access The Application

Jul 13, 2011

I have an application for my client's company. Their clients should post the request from outside thru internet. for that we have bought a Static IP. And now i have to configure that static ip to access the application from outside.what is the procedure for that?

View 1 Replies View Related

Using Android Application On A Different Network

May 9, 2012

I managed to make this Android application that can show my DB's records and works just as I wanted.The code uses a PHP script to connect with a local mySql database and a JSON parser is also used.Of course, the application works perfectly in my internet connexion since I forwarded the port 80 to my computer by loging into my router.URL,Now, I'd like to make it more global? I'd like for example to use this app in my university's network.But I can't access the university's router.

View 5 Replies View Related

Web Application Firewall Information?

Apr 2, 2013

Its more for information purposes. I am trying to compile some information together to get a better understanding of them so anything generic would do. Such as what it looks for in the traffic to block attacks, negative impacts of performance and a couple of top products I could have a browse of and so on.

View 1 Replies View Related

Need Recommendation For SFTP / SSH Application

Dec 13, 2012

There are many software available for this but the issues is how they all function. Example: One software Synchronized FTP allows you to set a local/remote folder and sync files between them. What was never disclosed is that you need Windows Task Scheduler to run the synchronization, and you do not see a progress indicator. I also tried TurboFTP but it felt like landing a space shuttle.

View 8 Replies View Related

One Application To Use Wireless IP / Another To Use Wired IP

Dec 14, 2011

I have a home network with various machines using the wirelss and mu laptop connected to the Belkin roouter both wireless and wired ....everything is seeing each other just fine b ut I would like to haveone app(say firefox ) use my wireless IP and oh say (World of Warcraft) use my wired ...

View 1 Replies View Related

How To Make Application Server

Mar 22, 2012

I want to learn how to make application server?I have Windows server 2008 enterprise edition and it is connected to 10 Client Machines. I want to install software programes only on server and use them on client machines without knowing server password.

View 29 Replies View Related

Adding A New PC To The Network Application?

Jan 30, 2012

Is it possible to create an application that allows you to add a new machine to the network and how?

View 2 Replies View Related

Application To Open From Email

Mar 4, 2011

I try to get this appication to open from my email?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved