I have a windows 7 pc and i would like to run SKYPE on network A as it uses alot of data.I would like all other programs to run on network Bi notice in skype options it uses port 12406. is it possible to set a rule that all traffic on this port be assigned to the IP of network A?ive read through some forums and i found this link regarding load
View 4 RepliesMy customer wants each ACE4710 (of a highly available cluster) to have its own, dedicated port for management purposes.
According to documentation, IP addressing can be applied to VLAN interfaces, so in order to satisfy the requirement, I should make one port belong to an "access VLAN X", and then apply IP addressing to the corresponding "interface VLAN X". This should satisfy my customer´s requirement in an indirect way.
But... ¿ Can´t I just configure IP address on one of the 4 ethernet ports in order to save the work of building the aforementioned VLAN? I am asking this since I do not have access to a real box in order to verify.
Everytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies View RelatedHow do you assign each customer to a vlan ? and what kit do you use at the core to roll out VLANS to each pop? We are thinking of using Juniper kit - putting customers on there own VLAN, and having a managed service like TR-069 on those VLANS.Is it do-able and what does everyone use for a TR-069 server - I've been looking on the net and havent had much joy in finding a server - or is it not as easy as I understand it to be.
View 4 Replies View RelatedI have a 2003 server that is doing something wrong. When I show the mac address table I can see that the server is assigning a bad mac address to several IPS. The server assign a non-existent mac address to some IPS for this reason the server stobut I would like to solve the problem
- I ran my antivirus an no virus was found.
- I updated the network driver.
I have a Compaq Presario 6000. The DHCP server is not getting a valid IP address. How do I troubleshoot?
View 2 Replies View RelatedHow to assign ip address in xp
View 2 Replies View RelatedI am working to find a new printer on a network. The new printer has the exact same name as another printer in the network? How do I assign a PC to default to the correct printer. It is a very active office so the trial an error thing sometimes takes a long time and also is frustrating because every time I install a new PC to the network (which is often) I run into the same problem over and over again. So how to I get the IP Address of the networked printer? How do I use the IP Address when assigning a new computer?
View 3 Replies View RelatedI had no trouble getting connected to the internet a couple of months ago. Then the signal got weak. I have a better antenna now and the network shows 5 bars but I cannot connect. It is an open, unencrypted connection. Wi-Fi Inspector gives this info[CODE]
View 19 Replies View RelatedI was using an IP address at one of client side and i got an IP address conflicted error and i changed the ip, Hence when i am searching that where does it consume on other systems i don't get the location & i need to use the conflicted one IP address so how can i know that which system does it using, i manually checked all systems i did not get, the ip address is gets ping but unable to get its location.
View 2 Replies View RelatedIf I have a network printer and I want to give to a ip address . How i can give a new ip address to that printer...
View 1 Replies View RelatedI am having issues with an IPAD 2 3g IOS 5.01 not being able to connect to a WIFI network based on a DLINK DIR 655
1) It is an open network (No password)
2) the DIR 655 is on firmware 2.00
3) the IPAD 3G sees the network but does not receive an IP
4) a IPHONE 4 has no problems accessing the networl
5) an IPAD2 Wifi has no problems connecting
6) 3g data is turned off
7) I have tried turning the IPAD 2 3g on and no luck.
how do i assign IP addresses to 10 computers in a network?
View 3 Replies View RelatedI know DHCP can assign more than just address, mask, and gateway. It can also assign a hostname, and DNS. Does anybody know if it can also be used to assign an SNMP address?
View 6 Replies View RelatedMy system is in LAN. IP is assigned by DHCP. Now i want to assign a STATIC IP to my system. There is no direct connection from vendor router to my PC. My network path is like this. From ISP vendor to Switch->Firewall-> LAN switch. how can i configure Static IP in my PC..
View 4 Replies View RelatedHow to assign NAT IP to server from Firewall
View 2 Replies View Relatedi m accessing ftp using vpn. there also have proxy server but i want to know how to configure proxy ip in my system.
View 1 Replies View RelatedI understand you can't assign an IPv4 Address to a "port". But here's my issue. I have two network cables attached to a managed switch, the location of the two cables are very important. Two computers attached to the said cables.I would like to communicate with one of the computers on PORT 1 and PORT 2, regardless of what computer is plugged into them. They get there IP's via DHCP, and a static IP wont work - as the computer plugged into PORT 1 or 2 may be different.So. I have two ports on the switch that I always want to communicate with the computer on the other end. But I don't (will not) always know the IP address of the computer(s) connected.
View 12 Replies View RelatedI know that a default gateway is used to log in remotely, but what is the purpose of the IP address on a VLAN?
View 3 Replies View RelatedON ASA, I understand that we can assign a static IP for a specific VPN client, or we can use a DHCP pool to assign IP. Now if I want to create DHCP pools, say pool_A and pool_B, for user A, B and C they use the IP from Pool_A, and user D, E, and F they get the IP from pool_B. Is there a way to do this in ASA?
View 4 Replies View RelatedIs there a way to assign priority on a wireless network? For example, on my home network there are about 4 computers connected, 5 cell phones connected, an Xbox a Wii etc etc. Is there a way to set which device takes priority over the others?
View 2 Replies View RelatedI have a broadband with wireless connection. I am also using on laptop. I want to assign a security key so as to avoid misuse by others
View 1 Replies View Relatedhow do i put a password to my router so my neighborhood cant access my router
View 1 Replies View RelatedI have a public IP and I want to be able to view my three systems connected to a linksys router from the internet. How can configure the router to see three systems with just one Public IP address whenever I am on the internet?
View 5 Replies View RelatedOk so I have a couple devices connected to it, but there's a trick with Android phones that users report better battery life assigning an Static IP to the phone, not dhcp or reservation. However I can't figure it out in this router as when I revoked the current address it wouldn't let me add a new one, and when I went to add one at .202 to be outside of dhcp range it doesn't let you and says to enter a number within the range, .100-.199
View 6 Replies View RelatedWhen I try to set an IP Adress to the Interface ethernet 0/0 I get the following:ERROR: This command can only be configured on VLAN interfaces This Error also come on the Interface Ethernet 0/1. Do I have to set first 2 VLAN and assign the Interfaces to the VLAN so that I can set IP Adresses to the Ethernet Interfaces? tell me what I have to do so I can configure the ASA 5505.
View 2 Replies View RelatedI need to know how to configure each port in switch SG300-10 to vlans, i need to configure one port "trunk" with catalyst switch and assign 4 ports to different vlans. any solution?
View 2 Replies View RelatedI've been given 4 more public static ip's and would like to use one of them static ip's to point to my sharepoint box, for example i want to be able to access my sharepoint boxweb site externally:
212.xxx.xxx.01 - my public pix ip
212.xxx.xxx.02 - is my owa for email (https://xxxxxxx.net/owa)
212.xxx.xxx.03 - my sharepoint box (https://xxxxxx.net/sharepoint)
212.xxx.xxx.04 - not assigned
What command do I have to input on the Cisco Pix 515 to make that work?
I'm using CCP to configure my Cisco 881, I need to assign my IP address range to the WAN interface (176.35.224.112/29), however everytime i enter the IP Address with a /29 subnet mask or indeed one of the usable addresses with a /32 I'm told I need to "Enter a valid IP address".I have also attempted to set the interfaces IP address via IOS directly and was also told the address was incorrect.
View 1 Replies View RelatedI'm currently using a LMS 4.2.x System and an ACS 5.3 System.
I solved the problem to authenticate the LMS WebGUI login to the ACS Server. But, I can't not find any document, which descripes how I can assing the group roles via ACS.
I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.
View 10 Replies View Relatedi have a ISDN connection i have got 1 static WAN ip and 7 static LAN ip . i have connected it to a server 2008 r2 given that the WAN ip and shared it how do i assisgn 7 LAN static IP in local area network
View 3 Replies View Related