Servers :: How To Configure Firewall Assign NAT IP
Apr 22, 2012How to assign NAT IP to server from Firewall
View 2 Replies
ADVERTISEMENT
Servers :: Configure Ipchain Firewall In Ubuntu
Feb 5, 2011I want to set up ipchain firewall of my ubuntu so that it prevents to traffic to an specific IP address?
View 1 Replies View RelatedServers :: Assign Static IP To LAN System?
Jun 6, 2011My system is in LAN. IP is assigned by DHCP. Now i want to assign a STATIC IP to my system. There is no direct connection from vendor router to my PC. My network path is like this. From ISP vendor to Switch->Firewall-> LAN switch. how can i configure Static IP in my PC..
View 4 Replies View RelatedServers :: Assign Proxy Ip In Windows 7?
Jun 8, 2011i m accessing ftp using vpn. there also have proxy server but i want to know how to configure proxy ip in my system.
View 1 Replies View RelatedCisco WAN :: Using CCP To Configure 881 - Cannot Assign WAN Address
Mar 21, 2012I'm using CCP to configure my Cisco 881, I need to assign my IP address range to the WAN interface (176.35.224.112/29), however everytime i enter the IP Address with a /29 subnet mask or indeed one of the usable addresses with a /32 I'm told I need to "Enter a valid IP address".I have also attempted to set the interfaces IP address via IOS directly and was also told the address was incorrect.
View 1 Replies View RelatedCisco Firewall :: Mask DMZ Servers From Private Servers And LAN ASA 5520
Jun 11, 2013We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
Cisco Firewall :: PIX 515 - How To Assign Static IP
May 20, 2012I've been given 4 more public static ip's and would like to use one of them static ip's to point to my sharepoint box, for example i want to be able to access my sharepoint boxweb site externally:
212.xxx.xxx.01 - my public pix ip
212.xxx.xxx.02 - is my owa for email (https://xxxxxxx.net/owa)
212.xxx.xxx.03 - my sharepoint box (https://xxxxxx.net/sharepoint)
212.xxx.xxx.04 - not assigned
What command do I have to input on the Cisco Pix 515 to make that work?
Servers :: Configure Toshiba Canvio HDD As A Server?
Nov 27, 2011is there a owners manual for Toshiba Canvio Portable Hard Drives?
View 1 Replies View RelatedServers :: Configure Linux Server With LDAP?
May 31, 2011the linux server should be configured with LDAP, so that any user should not login into that machine by local user credentials but by his intranet credentials.
View 1 Replies View RelatedCisco Firewall :: ASA5510 - How To Assign IP Address
Mar 25, 2011I am configuring ASA 5510.
My ISP given /28 pool of public IP's. So i had total 14 available IP addresses.
I configured one IP to the my firewall outside interface. I want assign remaining IP's to the my Servers, which are located inside to the firewall.
Servers :: Step To Configure LAN In Windows Server 2003
Apr 25, 2011In my collage i have a LAN to the wind server 2003 again i m also configure a small LAN may be take a 5 computer but the communication is not done.
View 1 Replies View RelatedCisco WAN :: 4500 When NIC Configure With Teaming / Servers Gets Not Reachable
Jan 11, 2011I have windows servers connected on cisco switch 4500 series. Issue is when server NIC configure with Teaming, some times servers gets not reachable, and after restarting the servers it gets reachable. Is 4500 series switch support the teaming software?
View 3 Replies View RelatedCisco VPN :: 888 Configure VRF With COOP Having Primary And Secondary Key Servers
Jun 19, 2012We are trying to configure vrf aware GET VPN with COOP having primary and secondary key servers and also 3 GM routers. All GM routers we use are Cisco 888 and Key servers we use cisco 2911 routers. All GMs crypto maps have been applied into Vlan interface as there's no L3 interface on 888 routers.
Always members can form a tunnel with primary KS, we have configured redundancy with secondary key server and listed on each GM primary and secondary KS on GDOI group.
The issue we facing is that whenever we shutdown the primary or secondary servers the tunnel is not forming with available KS unless otherwise we mannually clear the crypto session. In another way when primary KS down it doest not fall back to secondary KS and no GM get registered. We have already played with all the timers such as DPD, SA lifetimes, GDOI rekey lifetime etc and also exchanging the keys (import/export) with KS and COOPs but there's no luck. We could see the following message was seen on both KS.
[code] 192.168.1.3 is the primary KS and 192.168.1.6 is the secondary KS.I captured attached debug output from 1 GM and secondary KS while I shutdonw the primary KS and also attached is our senario we were trying get work.
Also attached is the show output from both KSs when it form a tunnel with GM.
Cisco Firewall :: Assign Secondary ISP-2 Pool IP To DMZ Server?
May 15, 2011Can we assign Secondary ISP-2 Pool IP to DMZ Server, network design attached for reference.
View 2 Replies View RelatedCisco Firewall :: 5520 Re-assign Policy Without Having To Do New Discovery
Sep 27, 2012I recently upgraded the ios image and the asdm on a cisco 5520 firewall. I use a policy on a cisco security manager to push policys out to this firewall. But it cant push to them now because the image has changed on the device.Is their anyway to re - assign the policy without having to do a new discovery.
View 2 Replies View RelatedCisco Firewall :: Assign Same VPN Pool IP To Client / ASA 5505-v8.4(2)
Sep 16, 2011Is there any way to always assign the same IP address to an AnyConnect VPN client logged into an ASA 5505 running v8.4?2
View 2 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR1042ND How To Configure Virtual Servers
Nov 9, 2012Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
I have read how to configure the Virtual Servers - Forwarding url...and added two entries, one for port 44612 and one for 32680 , my pc ip is 192.168.0. 100.Before I installed the router (my pc was connected directly to the lan connection) all was working just fine.And I double checked that the ports are not being blocked by firewall.
Cisco Firewall :: Cannot Assign LAN Failover Link As Statefull On ASA 5520
Oct 5, 2011I was trying to assing statefull link as same as LAN failover link on ASA5520 with VPN Plus license. But i am getting the below error. Is there any restriction in the license itself.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 - How To Assign Multiple Public IP Addresses
Dec 2, 2010I'm currently replacing my ASA 5505 with a 5510. I have a range of public IP addresses, one has been assigned to the outside interface by the setup wizard (e.g. 123.123.123.124 ) and another I would like to NAT to an internal server (e.g 192.168.0.3 > 123.123.123.125). On my asa 5505 this seemed fairly straigh forward, i.e. create an incoming access rule that allowed SMTP to 123.123.123.125 and then create a static nat to translate 192.168.0.3 to 123.123.123.125. Since I've tried to do the same on the 5510 traffic is not passing through so I'm assuming that the use of additional public IP addresses is not handled in the same way as the 5505? I also see that by default on the 5505, 2 VLANs are created, one for the inside and one for the outside, where as this is not the case on the 5510. Is the problem that VLANs or sub-interfaces need to be created first? I'm doing the config via ASDM.
Everything else seems to OK i.e. access to ASDM via 123.123.123.124, outbound PAT and the site-to-site VPN.
Cisco Firewall :: ASA 5505 - Unable To Assign IP To DMZ Vlan Interface
Oct 26, 2012I have ASA 5505 with base license. I created 3rd vlan on it.it was created. but i am unable to assign IP to it. i assign ip address it takes it. But when i do sh int ip brief it does not show any ip.
Code...
Cisco Firewall :: Assign Several IP Addresses To External Interface ASA 5510?
Oct 13, 2011How do i tell my firewall to start listen also on another outside ipadress assigned by my ISP? I have it used on other firewall right now. So my steps would be shutting down ip address assignment off old firewall interface. Assign that ip address to ASA5510 outside interface and configure NAT.
View 13 Replies View RelatedCisco Application :: Configure ACE 4710 For Load Balancing Speech Servers?
Sep 18, 2012I'm configuring ACE 4710's for the first time and I want to load balance my Nuance speech servers on port 554. Here's my configuration on ACE01:
[code].....
Cisco Switching/Routing :: C3750 - How To Configure 2 DHCP Servers For Two User Vlans
May 1, 2012I can't seem to find any info on how to configure 2 DHCP server pools on a C3750, to use with 2 user vlans. The purpose is that users in vlan 1 should get an IP address from DHCP server1, and users in vlan 2 should get an IP address from DHCP server2. Both DHCP servers are configured in a stack of C3750 switches, which acts a a L2 switch.
View 2 Replies View RelatedCisco Application Networking :: How To Configure ACE 4710 Bypass Traffic From Servers To Internet
Jan 1, 2013I'm looking for a way to configure Cisco ACE4710 loadbalancer to bypass traffic that is initiated from server side to Internet?Are there any way to configure this, so that the loadbalancer will not maintain session for this bypass traffic to maximize throughput?
View 1 Replies View RelatedCisco Firewall :: Pix 515E Cannot Ping Or Assign DHCP Addresses To Inside Clients
May 6, 2011I have a PIX 515E that I want to use to as a border between my internet connection and my Cisco AIR1131AG. I have configured the PIX to have the outside interface as a dhcp client which gets its dynamic IP address from the cable modem. the AP is connected to the E1 inside interface. Now I could see the E1 interface from the arp table from the AP but I cannot ping it. From the firewall I don't see the ARP table from the firewall. and i cannot ping the AP. what is wrong with the configuration? side note, i am able to connect to the AIR1131AG from my laptop I was not able to retrieve an IP address.
FW1 - CONFIGURATION
interface Ethernet0 description uplink towards the techsavvy modem speed 100 nameif outside security-level 0 ip address dhcp setroute !interface Ethernet1 description >>> WIFI LAN ACCESS <<< nameif inside security-level 100 ip address 10.0.0.1 255.255.255.0
[Code].....
Cisco Firewall :: 5505 PAT With Single Public IP And Several Servers Behind Firewall
Nov 21, 2012New to the ASA 5505 8.4 software version, but here is what I'm trying to do:
-Single static public IP: 16.2.3.4
-Need to PAT several ports to three separate servers behind firewall
-One server houses email, pptp server, ftp server and web services: 10.1.20.91
-One server houses drac management (port 445): 10.1.20.92
-One server is the IP phone server using a range of ports: 10.1.20.156
Basically, need to PAT the ports associated with each server to the respective servers behind the ASA 5505. Is anything missing from this config? Do I need to include a global policy for PPTP and SMTP? [code]
Cisco Firewall :: 6500 Cannot Ping The Servers Behind The Firewall
Feb 18, 2013I have 2 modules of FWSM in 6500 switch (failover).I need 5 context.When I use in routed mode (like in the picture) , I cannot ping the servers behind the firewall. (I have ping to FW context),In transparent mode, it is not happening.what is the problem with routed mode?
View 1 Replies View RelatedCisco Firewall :: Putting Servers Behind ASA5505?
Jan 25, 2012I am in the process of adding a lot of servers to sit behind our new ASA 5505 (8.4) firewall. At the moment I have added 2 servers and they are both NAT'ed to 2 different public IPs.
Server 1 192.168.10.1 -> 80.*.*.1
Server 2 192.168.10.111 -> 80.*.*.6
The first server can only be RDP'ed in to using its public IP which is what I want it to do. The second one has most of the service ports open like 443, 80, 110, 25 and etc. However when I try and browse externally to [URL]. I get an " Error 107(net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error." in Google Chrome or any other browser. and the ASA reports:11:27:30192.168.10.111262680.*.*.6443Inbound TCP connection denied from 192.168.10.111/2626 to 80.*.*.6/443 flags SYN on interface inside and I also get a Land to Land attack detected from 80.*.*.6 to 80.*.*.6
Is it worth setting up a DMZ or can I get away with the setup I have?
Cisco Firewall :: ASA 5550 - Two Different Syslogs Servers?
Aug 9, 2010In my Cisco ASA 5550, I need to set two different syslogs servers, and I need to send the system logs to the first one (only admins login/logout), and the traffic logs and all the rest (informational level) to the second one. Do you know if is it possible or not and, if yes, how to configure it?
View 6 Replies View RelatedCisco Firewall :: Mapping Servers Behind An ASA5505?
Nov 12, 2012I have the following configuration: An ASA5505 with Security bundle license sits at the perimeter with a single public IP address assigned to VLAN2 (outside) out of a /29 block. I have two servers with static IP addresses of 10.70.21.6 and 10.70.21.7 connected to the inside ports with default gateway of 10.70.21.1 (which is the IP address for the VLAN1 inside). I have already configured a default static route and NATing (PAT) so we have internet connection for the PCs. Now I need to configure the ASA to allow remote desktop connection to the servers (with static IP addresses above). Can I use a spare public IP address for each server and if so, whats the syntax? or is there another method? I have used this before but I had a Cisco 2811 router on the perimeter so the syntax was at then: ip nat inside source static 10.30.1.248 81.85.199.44
View 6 Replies View RelatedCisco Firewall :: No Traffic To Public Servers PIX 515
Jun 8, 2011Upgrading from a PIX 515 ,V6.2, I can get internet traffic out through the ASA , but no traffic in to the servers. The NATS are the same on the old firewall. The routers outside the firewalls are doing further natting from the .253 netwrok to a publilc address. No changes have taken place on the routers. [code]
View 3 Replies View RelatedCisco Firewall :: ASA 5520 - Allow Traffic Between DMZ Servers?
Dec 20, 2011We can´t reach DMZ servers from other DMZ servers?If I make a ping from DMZ server to another, sometimes only recieve one ping, sometimes 4, sometimes 0.How can I allow the traffic between DMZ servers??
(ASA 5520 Version 8.4)
Cisco Firewall :: ASA IOS 8.3 - Access To Servers At Company Out On Web?
Jul 26, 2011I have a AD server that needs to access to servers at a company out on the web. it an asa the protocol is ldap
AD server 10.12.1.56 / 24
External servers 206.123.45.122, 174.87.96.143
ASA configuration
access-list outside permit tcp host 206.123.45.122 host 10.12.1.56 eq 389
access-list outside permit tcp host 174.87.96.143 host 10.12.1.56 eq 380