How do you assign each customer to a vlan ? and what kit do you use at the core to roll out VLANS to each pop? We are thinking of using Juniper kit - putting customers on there own VLAN, and having a managed service like TR-069 on those VLANS.Is it do-able and what does everyone use for a TR-069 server - I've been looking on the net and havent had much joy in finding a server - or is it not as easy as I understand it to be.
View 4 RepliesI know that a default gateway is used to log in remotely, but what is the purpose of the IP address on a VLAN?
View 3 Replies View RelatedI'm trying to configure ACS 5.2 to assign the VLAN to a user dynamically based on the AD group that the user belongs to. I've gone into:
Users and Identity Stores -> External Identity Stores -> Active Directory -> Directory Groups tab
and selected the group name from the AD. If I understand correctly, I should now see this group under:
Policy Elements -> Authorization and Permissions -> Network Access -> Authorization Profiles -> Common Tasks -> VLAN ID/Name
However, it does not. Am I missing something?
Stumped again with my Catalyst 2950. Everything is working perfectly with wan/dhcp/router on fa 0/1 with all ports assigned to vlan1. All devices plugged in connect to the router correctly with ip's being assigned via dhcp.Instead of hooking up by console port I want to be able to SSH or telnet in to the switch using any port while still maintaining the above functionallity. Is it possible to assign a dhcp assigned ip address to vlan 2 and have vlan1 and 2 bridged? Or is there a better way of doing this ?
View 3 Replies View RelatedI have ASA 5505 with base license. I created 3rd vlan on it.it was created. but i am unable to assign IP to it. i assign ip address it takes it. But when i do sh int ip brief it does not show any ip.
Code...
I am trying to assign static ip address on vlan 1 interface , the model no of switch is SG300 & the firmware version is 1.1.2.0 .But whenever I type the IP address & press enter , a question is popped up asking for confirmation (switch0d851f(config-if)#ip address 1.1.1.1 255.0.0.0.
Please ensure that the port through which the device is managed has the proper settings and is a member of the new management interface.Would you like to apply this new configuration? (Y/N)[N] N )
Actually i have 7600 router and all trafic passes through Gi0/1(Routed port) interface to 6500 series switch. I need to create a vlan on this router eg. vlan 10 Any how it is possible assign a vlan to routed port and traffic of wan interfaces and the vlan traffic passed together.
View 2 Replies View RelatedIs it possible to assign 2 ports to a vlan on this switch and have the 2 machines connected to those ports be able to see each other without having to go off of the switch? If so, how would it need to be setup on the switch?
View 4 Replies View Relatedi'm using an rv220W and i whant to know if is it possible to assign vpn traffic to a vlan when i setup an ipsec tunnel?
example:
Im using different vlans on my rv220W.
Vlan 10: engineers (ex: 192.168.1.0/27) no intervlan routing
Vlan20: sales (ex: 10.0.123.0/24) no intervlan routing
This is what i need: - An engineer is on the road and when he makes a ipsec vpn connection => assignd to the vlan "engineers" so he can access the server/pc's in that vlan.and when someone from the sales group starts a vpn connection he needs to be in the vlan "sales" so he can access his pc/data,...
cant assign cisco switch 3560G port g0/1to access vlan 10
main-switch(config-if)#switchport access vlan 10 Command rejected: Gi0/1 not a switching port.
recently i just connected a non cisco ip phone(from panasonic) to Cisco 2960 POE switch at site A. The PABX system is located at site B,Site A and site B are connected using MetroE Point to point.I would like to apply QoS for voice vlan. I want to assign 2MB to the point to point connection for voice vlan.
View 3 Replies View RelatedI run a small coffee shop and want to offer free wifi to my customers while also having a secure network for my point of sale/internal network. What is the best way to do this on a limited budget? And what is the best way to protect the secure network?
View 1 Replies View RelatedI need two vpn tunnels from one ASA5510 to two customer endpoints but with the same host on the remote side, the two tunnels are for redundancy reasons. Can I just configure two tunnels with the same host on the remote side and assume the ASA will understand to just use one of the tunnels when both active or the one left when one is down? Or do I need extra configuration for that.
View 1 Replies View RelatedI am looking for a simple First name, surname and email in exchange to unlimited free access to our wifi. Would want the data to load on to Infusionsoft?
View 1 Replies View RelatedWe have a new remote site for customer which only have 3G connection and to add more pain to that they have dynamic IP address.the easist possible solution was EZY VPN.....client has 2800 router with 3G and at our end we have ASA.....the issue is that , that always server (clients nehind) asa initiate connection to the remote site ie to 3G.....the rule of thumb is that whenever client(ie EZY VPN) will initiate conection the tunnel will establish.
View 1 Replies View RelatedWe are upgrading a customer network and have found that users of a particular application [which is very bursty/bandwidth hungry] have experienced a marked performance drop. I see lots of output drops on the interfaces. This is only happening on 2960S-48 the rest of the users on 2960PSTL [all PoE] are not having nearly as bad a time.I have tried various QoS configs with little success. I have seen on some other blogs that the 2960S has less buffers than the rest of the family.
Removing QoS or upping the users to 1Gb cures the performance problem.
I'm part way through trying to set a Catalyst 4510R to factory defaults, One thing I'm stumped on is how do i remove the Customer Disclaimer eg what commands do i need to remove this and any other customer text within the switch, below is copy of text from the switch with customers details omitted.
View 5 Replies View RelatedI have a Cisco 3750 switch stack and am performing QOS against a number of SVI vlans on per customer basis. I have 8 customers, each with a /29 public subnet and each with an SVI as a gateway within that /29 range. I then have a "routable" SVI vlan for routing upstream to the internet. [code]
The service policy attached to the interfaces above is supposed to perform policing on download and upload traffic. The service policy is attached to the Routable VLAN for download policing and the Customer VLAN for upload policing. For example, traffic entering the routable VLAN will be policed based on traffic matching an access list to the customers IP range (download). Traffic entering the customer VLAN will be policed based on traffic matching an access list from the customers IP range (upload).The command I am using to police is as follows - police 10485500 966080 exceed-action drop.The problem I am experiencing is traffic into the routable VLAN is being successfully policed down to the 10Mbps i have specified on a per customer basis (download).Traffic entering the customer VLAN is NOT being policed at all (upload).I am limited as to the use of the parent policy map I have specified on the interface, as I can only assign it in one direction (input).
one of my customer has CSACS & has bought CSACS-5-BASE-LIC, at the time of registration i ,had put the end customer as my company, how to change the end customer details on the license.
Had sent a mail to licenseing@cisco.com, they changed the end user details at there end, but the same is not reflecting on the physical box at the customer site.
We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 Replies View RelatedWe have Cisco 4507-R installed at customer site which got hang twice and became normal after getting booted.I have analyzed show tech-support for this switch after reboting but not found relevant logs for hang issue,
View 7 Replies View RelatedI am a beginner, and my customer complaining about the internet connection performance which is very slow, the network description is given below:
Description:
The building has four floors and each floor has one mount rack which contains one 26 port switch + 16 port switch. and each floor has 32 pc as well.
- 4, Cisco SR2024 un managed switches.
- 4, Cisco SR2016 un managed switches.
- 1, Cisco access point for internet connection.
- 1, Active directory server.
- 1, Mail Server.
- Internet ADSL connection, 1 MB speed.
This is the current topology.
*Note:The links and cable type "100BASE-TX under Cat 5" among all switches.
*Note:Whenever I connect to the main router "Access point" the internet becomes very fast.
i have a simple router on a stick config which is providing dhcp to a customer SSID. however i don't want employees to stay on it and eat the band width since its open. the lease is set to an hour, is there anyway that i could set it so that once your lease expired it can't be renewed for 4 about 8 hours? I am using a cisco 2600 router in this setup.
View 1 Replies View RelatedI have a windows 7 pc and i would like to run SKYPE on network A as it uses alot of data.I would like all other programs to run on network Bi notice in skype options it uses port 12406. is it possible to set a rule that all traffic on this port be assigned to the IP of network A?ive read through some forums and i found this link regarding load
View 4 Replies View RelatedWe are trying to config vlan 10 for data and vlan 20 for voice on the same port - port 1 of swtich SF300-24P to run both data and voice on different vlans.Do I have to add vlan 10 as an untagged vlan to port 1 and add vlan 20 as an tagged vlan to port 1?If I do not want to assign the native vlan 1 to port 1, how can I remove it ? The GUI page - assign VLAN to port does not allow to remove it.Aslo, what mode shall I set up on port 1? General, trunk or access ?
View 18 Replies View RelatedHow do I submit an RFE (Request For Enhancement) to the Cisco SBR team to encourage them to implement the missing support for VLAN to VLAN firewall rules that was available in the RVS4000 (See [URL]) and that was supposedly added to a beta release of the RV220W firmware (See [URL])?
View 1 Replies View RelatedBetween our hosting and a customer we have an extended vlan, traveling on a fiber, between two cisco 3560 switches.The thing is, that we want to create one or more vlans inside that extended vlan, in some way if possible?
View 3 Replies View RelatedI have two networks at two sites with a dot1q trunk between the two L3 switches at both sites (no routers involved)
SITE A - Cisco 3750 L3 - VLAN ID 50
10.10.50.0/24
SITE B - Cisco 3750 L3 - VLAN ID 50
10.20.50.0/24
I would like to extend the SITE A VLAN to SITE B so that I can move hosts from SITE A to SITE B without needing to change their IP address but the vlan ID is already in use. Obviously the easy solution is to change the VLAN ID for one or other of the sites but both sites contain hosts that run 24/7. Is there a way to join two VLANs with different IDs together.So for example I create a new VLAN 60 at SITE B and associate it with VLAN 50 at SITE A.
We have 6509 VSS with FWSM Module and we have created two context on it, one is INTERNALL CONTEXT othe is EXTERNALL Context? We have spanned various VLANS in switches and FWSM context level. All VLAN Gateways are configured in context level.
Activity description : We had planned migration of these devices into a new Datacenter, it was a planned activity. During migration of devices from one Dc to a new DC we broke the VSS and kept the primary running and removed the secondary switch and migrated this secondary to new DC and powered this device ON in the new DC and checked all the config was very much fine but this device was OFF network as secondary was brought to new DC just to limit the downtime during the primary switch movement.
During the activity ( Primary switch movement )We powered off the Primary switch and mean time before shifting into new Data center We had brought up secondary switch which was already existing in the DC was put live in the network and it was working fine without any issues.
Later we had moved Primary into new data center and tried to put into VSS with the secondary , during this period the secondary device into went into RECOVERY MODE and primary device was not responding and devices went off network and immediatly we removed the VSL link and brought up primary into production network without secondary online in the network ( Without VSS just stand alone switch ) network started working, but bringing up the primary we found that some of the VLANS in the FWSM was deleted and some VLAN had misconfiguration ( example : say original VLAN ip 10.200.112.1 has become 10.300.13.1 ) also some of the access list as well as SVI was deleted making configuration mismatch.
Wanted to know while syncronization b/n primary and secondary switch in VSS if we pull out VSL link would create this type of issues.
I have set up 2 DHCP pools and 2 VLANs (1 *the native* for data / 1 VLAN for voice). When I use the command "switchport voice vlan 20" the port disapear from the show vlan brief list. When I use the "switchport access vlan 20" it shows up in the show vlan brief in the correct VLAN and gives the phone an IP. I assume that using the access instead of the voice is wrong and the phones would not configure correctly. But when I use the access the phone goes to the next step and tells me the TFTP files are not found. Why does the port disapear from the VLAN list?
View 8 Replies View RelatedI have a Netgear GSM7248R switch with 5 different Vlans including th management Vlan. Each of the vlans are connected to my layer 3 switch for routing. I want to access the management vlan form any of my Vlans so my layer two switch can be detected by my snmp manager.
View 3 Replies View Relatedi need to solves this little problem on 2960S lan BASE but i dont know if it is possible.
Uplink port config for gi 1/0/28 is:
switchport mode trunk
switchport trunk alloved vlan 10,11
but on interface gi 1/0/1 i want to have data from vlan 10 tagged as VLAN 20.
At this time i have solved this issue very primitively
I have set up gi 1/0/2 as int mode acces, acces vlan 20 and i have connected gi 1/0/2 with gi 1/0/3 with eth cable. int gi 1/0/3 is switchpor mode acces, switchport acces vlan 10
I have a 3750G switch in my production network that only has VLAN 1 on it. All ports are in a default state and VLAN 1 is disabled. The switch is passing traffic but shouldn't having the default VLAN shut down cause the ports not to pass traffic? If I start to create VLANs will that cause the switch to stop passing traffic?
View 4 Replies View Related